System Level Audio Equalizer
iTunes offers an audio equalizer to help manage the audio for iTunes. Does Apple have a system level audio equalizer that can manage the audio from other applications, such as web browsers (Safari, Firefox, etc.)? Or is this feature only available as third-party shareware?
No, but a good third-party shareware product exists called Hear - VersionTracker or MacUpdate.
Similar Messages
-
Hi--
I have the following settings to process my .aiff mix through Compressor:
Name: ReadyForImport
Description: AAC audio
File Extension: ac3
Audio Encoder
Format: AC3
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
Target System: DVD Audio
Data Rate: 448 kbps
Compression Preset: None
Audio Coding Mode: 2/0 (L, R)
BitStream Mode: Complete Main
Center Mix Level: -3dB
Surround Mix Level: -3dB
Dolby Surround Mode: None
LFE Exists: No
Dialog Normalization: -27 dbFS
Copyright Exists: Yes
Original Content: Yes
Audio Production Information Exists: No
RF Overmodulation Protection: Off
Channel Bandwidth Lowpass Filter: Off
DC Highpass Filter: Off
LFE Channel Lowpass Filter: On
3dB Attenuation: Off
phase 90: On
Deemphasis: Off
My original audio was mixed in DP 4.6, and sounds great in my studio, which is tested flat, in fact, a bit too much signal if anything. My original sample rate is 48k, 2-channel stereo, 16-bit. You'll notice I have unchecked all pre-processing options and used no compression.
However, when I run this through Compressor, import it into DVDSP and run the finished DVD, the audio is about half what I would expect, and about half the volume of several test commercial DVD's (Your basic purchased movies). So something is wrong.
Can someone perhaps enlighten me how to fix this?
Thanks
All My Best,
Jeffreyhello jeffrey
looking at your specs let me recommend these:
Name: ReadyForImport
Description: AAC audio
File Extension: ac3
Audio Encoder
Format: AC3
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
Target System: DVD Audio
Data Rate: 192 kbps (DO NOT USE 448 unless it is surround sound!)
Compression Preset: None
Audio Coding Mode: 2/0 (L, R)
BitStream Mode: Complete Main
Center Mix Level: -3dB (this one should be greyed out once you fix 192 Kbps
Surround Mix Level: -3dB (this one should be greyed out to)
Dolby Surround Mode: None
LFE Exists: No
Dialog Normalization: -31 dbFS (this should always be here)
Copyright Exists: Yes
Original Content: Yes
Audio Production Information Exists: No
RF Overmodulation Protection: ON (should always be on)
Channel Bandwidth Lowpass Filter: ON
DC Highpass Filter: ON
LFE Channel Lowpass Filter: OFF (since you do not have a LFE track)
3dB Attenuation: Off
phase 90: OFF
Deemphasis: Off
hope this helps, contact me offline if you wish to know WHY to put these settings into play!
Mikey -
I just received my very first mac a week ago. When I was looking through the sound preferences in system preferences, i realized there was no audio equalizer. Do you guys know of any free ones I can use for safari and other programs?
Hi,
This is the Logic forum. You may get more answers on the OSX forum.
There is a free technique I found here (i have not tried it):
http://clearlyenigmaticdistantlyjuxtaposed.blogspot.com/
Is this what you want to do?
JG -
I have (2) ENVY17 2000 Notebooks both built in 2011. The Beats Audio Equalizer Panels are completely different. One has a very useful output graph that makes it easy to fine tune the panel's Hz slide tabs for maximum enjoyment. The other has no such graph, just the slide tabs along with a "feature" module to dial in things like echo, noise reduction, or to boost vocal output. Can the preloaded one that I don't like be reloaded with the one I do??
I too have the Envy and the same set up. I know that there just must be a better piece of software-- by Beats?-- to run the very substantial speakers in this system. Everything is turned up as loudly as it can be, all slides full open, but it still sounds quite muted to my ear.
If anyone knows of a better driver for the HP Envy with Beats Audio, please reply? thank you!!
simone -
Gets error "-17502; System Level Exception" while running the custom Step in NI TestStnad 2010
I have a custom teststand step which works like For loop in TestStand. Previously I was using LV 2009 and NI TestStand 4.2.1 and this step was working fine. Recently I upgraded my system to LV 2010 and TestStand 2010, since that it is not working.
When I run the step it gives error "-17502; System Level Exception". I have attached error screenshot.
I am using NIFlowControl.dll in this step.
Please do the needful.
Attachments:
System Levle Exception error.JPG 25 KBThe source code for NIFlowControl.dll ships with TestStand. Did you perhaps
1) modify the code and rebuild this dll in teststand 4.2.1, but did not move your changes into the 2010 version and recompile the 2010 version?
Or
2) Move your 4.2.1 version of this dll to 2010 in which case it might be missing important code that exists only in the 2010 version. It's best to redo your code changes to the 2010 version and recompile that if needed.
Also ideally your modified version of NIFlowControl.dll should be located in the teststand public directory rather than the program files directory.
-Doug -
Setting system level deployment.user.cachedir in deployment.config
G'day,
I've been experimenting with JRE 1.5.0_04 on Windows XP.
By default deployment.user.cachedir is set to <user home>\Application Data\Sun\Java\Deployment\cache. However, I want it to be <user home>\Local Settings\Application Data\Sun\Java\Deployment\cache.
I have managed this as follows.
C:\Windows\Sun\Java\Deployment\deployment.config contains:
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.propertiesand C:\Windows\Sun\Java\Deployment\deployment.properties contains:
deployment.user.cachedir=$USER_HOME\\..\\..\\..\\..\\Local Settings\\Application Data\\Sun\\Java\\Deployment\\cacheThis works but is ugly. The problem is that $USER_HOME=<user home>\Application Data\Sun\Java\Deployment. It seems that $USER_HOME and $JRE_HOME are the only two variables for use in deployment properties. Are there any others, in particular, one that mirrors the user's actual home directory?
Thanks,
Chris.G'day,
Open the Java Console and execute "dump system and
deployment properties" which shows property values,
and see if what you want is there.Thanks, but I don't think I can use these at the system level, can I?
I did try using ${user.home} but that doesn't work.
So, are there any variables other than $USER_HOME and $JRE_HOME that can be used when setting system level properties?
More info, http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
Thanks,
Chris. -
http://www.wpcentral.com/nokias-custom-equalizer-gets-picture-lumia#comment-181843
The above link is for an article on WPCentral talking about a custom audio equalizer - oh my god Nokia PLEASE make this for us current Lumia owners - my Purity HD headphones have been crying out for this since i got them in May!!!
I really hope Nokia make a version compatible for our Lumias on WP7.5 and/or WP7.8+1
I've Got a Lumia 800 ..and it's a real good device, but when it comes to music listening experience.. Bah!!.. everything falls FLAT....An Equalizer would be a real good inclusion... i wish this feature is included in the Upcoming windows phone 7.8 update... Nokia Is known for its support.. and In Nokia We trust!!! ... -
Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2
If there is I can not find it - Google provides a list of possible methods form Adobe and others
LN -
Release Space at file system level in DB2
Dear Gurus,
We have ECC 6.0 system on AIX with DB2 9.1 . We want to release space at file system level , I have idea regarding Oracle that it can be done in 2 ways 1: Offline DB reorg 2 : Dtafile resize.I am new to DB2 so can you please let me know whether it is feasible with DB2 as well or not.
In case yes what steps we need to perform in db2 in order to release space
Regards
Kuldeep singhYou can reduce the size of your tablespaces down to their current high water mark with the ALTER TABLESPACE REDUCE command. Reducing the high water mark requires much more work and on DB2 V9.1 there is no relyable way to do this.
DB2 V9.7 provides a new tablespace type with "reclaimable storage" attribute that allows to reclaim space much easier.
If you have a lot of trapped free space in your V9.1 tablespaces below the current high watermark you may want to consider a homogenous system copy with R3load into new tablespaces. This should be combined with an upgrade to V9.7 to get the new tablespace types. Another way to reorganize tablespaces is to move all tables into new tablespaces using DB6CONV.
Regards
Frank -
JRE System-level settings does not work - JRE1.6.30
Good day,
I need to set deployment.security.mixcode parameter to "DISABLE" within of deployment.properties configuration file.
Also I wish to place the deployment.properties configuration file is not user-specific path. The default location is
<User Application Data Folder>\Sun\Java\Deployment\deployment.properties.
TO change the default location I read about possibility to use the deployment.config for specifying the System-Level
deployment.properties in the infrastructure.
Unfortunatelly seems does not work. Someone have got experience about system level settings of deployment.properties?
This is the configuration I have used.
deployment.config:
deployment.system.config.mandatory=FALSE
deployment.system.config=file/:C:\Program Files\Java\jre6\lib\deployment.properties
deployment.properties:
#deployment.properties
#Fri Feb 17 15:54:57 CET 2012
deployment.version=6.0
deployment.capture.mime.types=true
deployment.browser.path=C\:\\Program Files\\Internet Explorer\\iexplore.exe
#Java Deployment jre's
#Fri Feb 17 15:54:57 CET 2012
deployment.javaws.jre.0.product=1.6.0_31
deployment.javaws.jre.0.registered=true
deployment.javaws.jre.0.osname=Windows
deployment.javaws.jre.0.platform=1.6
deployment.javaws.jre.0.path=C\:\\Program Files\\Java\\jre6\\bin\\javaw.exe
deployment.javaws.jre.0.location=http\://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.enabled=true
deployment.javaws.jre.0.osarch=x86
deployment.security.mixcode=DISABLE <<====
Thank you in advance
Adriano C.
Edited by: user12025469 on Feb 20, 2012 6:23 AM
Edited by: user12025469 on Feb 20, 2012 7:48 AMuser12025469 wrote:
This is the configuration I have used.
deployment.config:
deployment.system.config.mandatory=FALSE
deployment.system.config=file/:C:\Program Files\Java\jre6\lib\deployment.propertiesHm, try using a file URL like this:
file\:C:/Program Files/Java/jre6/lib/deployment.propertiesI believe that the file is interpreted as a properties file, which means the colon and slashes need to be escaped. This would be it if you want to use a proper Windows path:
file\:C:\\Program Files\\Java\\jre6\\lib\\deployment.properties -
Deployment '18600003' to target 'Production' encountered a system level dep
Hi Experts,
Please help me in resolving the error while i am doing full deployment from BCC to staging / production server instances , i am getting below error.
It would be great if u help me resolving this error.
<Dec 5, 2012 1:48:26 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
**** Warning Wed Dec 05 01:52:33 PST 2012 1354701153339 /atg/epub/PublishingRepository Using default JDBC type for: project:tar1557 could not find this column in the table's meta data
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163290 /atg/epub/DeploymentServer Run first apply phase: true
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163292 /atg/epub/DeploymentServer Target not configured for switch. Skipping switchable datasource verification.
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163407 /atg/epub/DeploymentServer DistributedDeploymentAdapter:DAF Deployment with ID: 18600003 previously deployed.
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163410 /atg/epub/DeploymentServer DistributedDeploymentAdapter:Deploy Data
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163410 /atg/epub/DeploymentServer DistributedDeploymentAdapter:Resuming DAF deployment with ID: 18600003
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer --- CONTAINER:atg.deployment.common.DeploymentException: Deployment '18600003' to target 'Production' encountered a system level deployment error during data transfer.; SOURCE:atg.deployment.DistributedDeploymentException: Cannot resume deployment 18600003 because it was cancelled before the deployment data and markers were saved.
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.common.ResourceUtil.exception(ResourceUtil.java:414)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.deployData(DistributedDeploymentAdapter.java:1399)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.transferData(DistributedDeploymentAdapter.java:278)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.server.Deployment.run(Deployment.java:1951)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at java.lang.Thread.run(Thread.java:662)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer Caused by :atg.deployment.DistributedDeploymentException: Cannot resume deployment 18600003 because it was cancelled before the deployment data and markers were saved.
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.DeploymentManager.deploy(DeploymentManager.java:1069)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.resumeDafDeployment(DistributedDeploymentAdapter.java:1944)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.deployData(DistributedDeploymentAdapter.java:1307)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.transferData(DistributedDeploymentAdapter.java:278)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.server.Deployment.run(Deployment.java:1951)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at java.lang.Thread.run(Thread.java:662)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer
**** Warning Wed Dec 05 02:03:14 PST 2012 1354701794489 /atg/dynamo/service/ClientLockManager The useLockServer property of: /atg/dynamo/service/ClientLockManager is false and so global locking is disabled
**** Warning Wed Dec 05 02:04:43 PST 2012 1354701883454 /atg/epub/PublishingRepository Using default JDBC type for: project:tar1552 could not find this column in the table's meta data
**** Warning Wed Dec 05 02:05:41 PST 2012 1354701941339 /atg/epub/PublishingRepository Using default JDBC type for: project:tar1557 could not find this column in the table's meta data
Thanks ,
Sharif.Hi,
I faced the same issue while opening the merchandiser tab in the BCC(after providing the credentials error dialog appearing the UI side and log showing the error whatever you mentioned). But issue resolved after initiating a full deployment and the restarting the publishing server.:))))) -
Deployment '124500010' to target 'tar12462' encountered a system level dep
Hi Experts,
I'm trying to do initial deployment in Agent BCC. I'm getting below error while deploying
' Deployment '124500010' to target 'tar12462' encountered a system level deployment error during data transfer. '
and Details
Message Detail:
CONTAINER:atg.repository.RepositoryException; SOURCE:java.sql.SQLException: ORA-00942: table or view does not exist at atg.adapter.gsa.Utils.deleteAllItems(Utils.java:1384) at atg.adapter.gsa.Utils.deleteAllItems(Utils.java:1524) at atg.adapter.gsa.Utils.deleteAllItems(Utils.java:1674) at atg.deployment.repository.RepositoryWorkerThread.prepareFullDeployment(RepositoryWorkerThread.java:636) at atg.deployment.repository.RepositoryWorkerThread.preDeploymentPhase(RepositoryWorkerThread.java:525) at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:310)
It's saying that Table doesn't exist, but I went through log, I didn't found any table name(Which table it's trying to search).
Can you help me to fix this issue.
Thanks & Regards,
Murali.ChHi,
It seems that your DB is not upto date with the deployed code. It has some missing table as evident from the error. If you can try some DB comparison tool and compare the DB with other environments on which BCC deployments are running fine.
1. Do a full deployment
2. If it fails with same error it means DB isnt in sync.
3. Copy that from other environment or do by a DB checker tool/ comparison tool.
4. Resume deployments.
Thanks -
Setting javaplugin.maxHeapSize -Xmx at system level
G'day,
A similar unanswered question has been asked elsewhere
http://forum.java.sun.com/thread.jspa?forumID=30&threadID=5115738
I would really like to know whether it is possible to set the default value of javaplugin.maxHeapSize at the System Level (I know how to do it on a per user basis).
In particular, I am interested in doing this on Windows Vista, where I've read the limit can be as low as 64M (!)
http://forum.java.sun.com/thread.jspa?forumID=30&threadID=5168556
I understand that it might not be possible - the heap-size limit is set by the application, e.g. IE7, into which the Plug-In is being embedded. Even so, it can be overridden at the user-level, so why not at the system level?
Thanks,
Chris.G'day,
Did you ever find a solution to this problem?
I'm in a similar boat...
http://forum.java.sun.com/thread.jspa?threadID=5185445
Thanks,
Chris. -
System level location of deployment.config
According to http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html, the system level deployment.config can be found in one of two locations on windows:
(1) <Windows Directory>\Sun\Java\Deployment\deployment.config
(2) ${deployment.java.home}\lib\deployment.config
The documentation is a bit sketchy as to what determines which location it checks. From my testing, it seems that if you have a JDK installed, it looks for it in (1). If you only have a JRE installed, it looks for it in (2). Can someone confirm this? Secondly, why does WebStart via a JDK install look in one location while WebStart via a JRE look in another? Why can't it simply search in one location?JRE/JDK makes no difference. Java Web Start is in the JRE, so you actually need a JRE to run javaws.
Webstart will always look first in (1) , and if no deployment.config is found, it will look in the lib directory of the jre that javaws is in. (2)
However, updating a JRE will (until after 6u4) put the new JRE in a new directory, so you would loose any customization done to the old JRE (such as putting a deployment.config in in) so (1) is preferred, unless you want the config to only apply to a specific update version.
/Andy -
Can anyone tell me how to do a system level deployment using JNLP ?
Hi All,
Can anyone tell me how to do a system level deployment using JNLP ?
Any example or link will be very useful.
Thanks in advance..Thanks for the link. I can now able do configure on system level.
Uniform for all users.
However, I have three different environment running ( e.g : production, uat and dev )
And I want to deploy all of them on system or enterprise configuration.
I create the file "deployment.config" on jre/lib directory and put the entry as below :
deployment.system.config=file:/E:/Deployment/XXXX/production/deployment.properties
deployment.system.config.mandatory=trueNow, when I run other environment it will look on the production deployment. I have different
version of jars for production , uat and dev.
How can I archive that ? I want different universal "cache" of jars for all the three different environment.
e.g ( production - in one loaction for all the users , C:\Documents and Settings\All Users\Application Data\prod\cache
uat - in one loaction for all the users , C:\Documents and Settings\All Users\Application Data\uat\cache
dev - in one loaction for all the users, C:\Documents and Settings\All Users\Application Data\dev\cache )
Is that possible ??
Thanks in advance,
Maybe you are looking for
-
How can I delete all music files from my iPhone and start again?
I rebuilt my iTunes library. I was under the impression that the first post-rebuild sync would erase all media from my iPhone. Under the Summary tab in iTunes, I checked Sync only checked songs and videos, and in my music list all songs are unchecked
-
Error depreciation run "GL account 2999999 not created in chart of account"
Dear all, I am facing a very confusing error message. My customer has been live with SAP for over 2 years, and everything has worked fine. This month period 9) they got an unexpected error message during ordinary depreciation run. No depreciation is
-
Hello! I want to use include in my database info about dates an hours. For the first one, I use the type date (example: to_date('26-11-06','DD-MM-YY')) but I didn't find anything about the type hour and how to use it (selecting, inserting values...).
-
'Open with'/'Always open with' file settings not saved after Mac get's shut down.
Every time I restart the computer, I have to re-change the 'open with' settings to files. How do you get the Mac to remember the settings after the computer is shut down. It used to not have this problem.
-
Output stream with a keylistener
Hello, I have a program that basically runs .class and .jar console based programs, using JFileChooser to open them and such. I have managed to capture the System.out and System.err streams from running processes and using p.getInputStream() and p.ge