System Level freeze When running Project manager...
LOGIC PRO 7.2.3
OSX 10.4.8
G5 quad
When I Attempt to initialize the preferences, the whole system FREEZES UP.
This happens when it is attempting to rebuild the "Tree".
AND...
If I launch the "Project Manager" it locks up the system when reading the directory tree....
This is a CLEAN INSTALL of 10.4.8.....
BLACK SCREEN "You must restart your Computer"...
Help!!!
G5 Quad Mac OS X (10.4.8)
Any advice?
Yes, but you're not going to like it.
Before I say more, let me tell you that I went through a similar situation when I first got my G5 (which was a dual 2.7). Kernel panics, every problem in the book. (I recently went through a similar episode with my Quad). And so the advice I'm going to offer you may seem absolutely radical. It might even make you mad. But most of what I'll advise was exactly the advice offered to me over a year ago by this forum's members and it got me up and running.
First, try re-initializing the firmware on your computer. Best thing to do is take it to an Apple store and have them do it. It's a 2-minute process that could potentially cure all of your machine's ills.
When you're there, ask them to show you how it's done. It's not something to be done on a regular basis and a pretty radical thing to do, but it could knock the sense back into your computer in a pinch.
If that doesn't solve the problem, you will need to start from scratch. This means wiping your hard drive entirely (down to zeros). Then re-install the software from your factory OS CD and NOT a clone of your existing drive.
The reason this is necessary is this: there is every possibility that the OS on your system -- as installed by Apple -- is the very thing that's corrupting your computer/making you unable to run Logic. If you want the explanation I'll give it to you, but suffice it to say that the OS on your factory install CD is correct for your computer, whereas the OS installed BY the factory on your computer may not be. This is not BS or voodoo. It's a documented fact (documentation can be found on Apple's very own website).
Anyway, after you've wiped your drive and installed the OS from the disk, your very next step would be to install ProApps 3.1.
Then install Logic and do not copy your preferences from an older backup, period.
Yes, it will be a total PITA to re-establish all of your key commands from scratch, but by doing so you can guarantee that your preferences are absolutely virgin.
The next step is to update the OS to whatever you want it to be.
After this, start installing your 3rd party plugs and anything else you want to add to the computer.
I suggest you follow these steps exactly in this order, as it worked for me, and worked very well.
Message was edited by: iSchwartz
Similar Messages
-
lion, system preferences freezes when I tried to change wall paper,how do I fix this?
Quit System Preferences if it's running. In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following item to the Desktop:
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item. -
For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?
Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts? -
System preference freezes when i select icloud or mail accounts.
i migrated from mobile me to icloud and now the system preference freezes when i select icloud or mail accounts. The resources are 100% utilized. I also updated the software. Am using Lion OS X
Any Help , i need to get out of this.No guarantees, what you might like to try the following:
1. Sign out of your account
(If you are unable to do this because System Preferences has frozen, Force Quit System Preferences and try again)
2. When prompted, opt to delete, contacts, calendars etc from your Mac.
(You are only deleting this data from your Mac, not from iCloud, the data will be reinstated when you log back in. If you need to check that the data is in iCloud before deleting it go to iCloud.com and check each section for data)
3. Having logged out, check that the iCloud accounts along with their data have disappeared from the Mail, Address Book and iCal Applications.
(If necessary, delete the iCloud accounts from each of these application separately from each Applications Preferences)
4. At this point it may be worth trying to log into iCloud from the System Preferences iCloud settings again, if this works, all well and good, if it doesn't continue to step 5.
5. Open your User Library folder in the Finder. (When in the Finder, go to the Go menu, hold down the option key (alt) and choose Library when it appears in the Go menu)
6. Navigate to Library > Application Support > iCloud and drag the iCloud folder to your desktop. (This action only copies the folder and will provide you with a back up)
7. Select the iCloud folder again in Library > Application Support and drag it to the trash, enter your administrators password when prompted.
8. Restart your computer.
9. You should now be able to enter your ID and Password in system Preferences > iCloud and log into your account. Check the services you wish to use and once you are satisfied it's working as it should, trashh the iCloud folder you copied to your desktop earlier. -
System Preference freezes when I want to change desktop background picture
My system preference freezes when I try to change my desktop background picture, any help, I tried disk utility repair, couldn't find the files to trash.
Login to the problematic account ensure that System Preferences is closed down. Move the following file to trash:
<home>/Library/Caches/com.apple.preferencepanes.cache
but don't delete it from the trash yet, just in case you need to restore it. Re-open System Preferences, it will re-create the file. If all's well then, then you can empty the trash. -
1.5 sometimes freezes when running statements with F9
I had noticed occasional freezes when hitting F9 with 1.5.0 production (ie three or four times last week), but after upgrading to 1.5.1 today (fresh install, migrated preferences) I have had four or five freezes when hitting F9. The UI completely freezes before showing the progress bar and there is no redraw, but it isn't using any CPU (and CPU is 95%+ idle), nothing appears on the console (started using <SQL Dev Install>\sqldeveloper\bin\sqldeveloper.exe) and if I leave it long enough the memory usage drops from 150K+ to back between 1K to 4K (sometimes quickly, sometimes not).
I am on Win XP SP 2, using SQL Developer 1.5.1.54.40 with JDK 1.6.0_04.
Initially, I upgraded to 1.5.1 from 1.5.0 as a Check for Updates, but tried the clean install (including renaming preferences directory) after the first freeze.
Has anyone else seen this? Can someone from the SQL Dev team provide any help? Is there something else I can do to help narrow this down?
theFurryOneSame thing in very similar circumstances - query with bind variables previously executed, freezes on execute without showing bind variable window. Using no appreciable CPU in this state, but after a minute or so memory usage started to increase in 4 or 8K chunks.
I've also been seeing this intermittently in all builds of 1.5.
About
Oracle SQL Developer 1.5.0.53
Version 1.5.0.53
Build MAIN-53.38
Copyright © 2005,2008 Oracle. All Rights Reserved.
IDE Version: 11.1.1.0.22.49.35
Product ID: oracle.sqldeveloper
Product Version: 11.1.1.53.38
Version
Component Version
========= =======
CVS Version (External) (CVSNT) 2.0.51d (client/server)
Java(TM) Platform 1.5.0_06
Oracle IDE 1.5.0.53.38
Versioning Support 1.5.0.53.38
Properties
Name Value
==== =====
apple.laf.useScreenMenuBar true
awt.toolkit sun.awt.windows.WToolkit
class.load.environment oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level CONFIG
class.transfer delegate
com.apple.macos.smallTabs true
com.apple.mrj.application.apple.menu.about.name "SQL_Developer"
com.apple.mrj.application.growbox.intrudes false
file.encoding Cp1252
file.encoding.pkg sun.io
file.separator \
ice.browser.forcegc false
ice.pilots.html4.ignoreNonGenericFonts true
ice.pilots.html4.tileOptThreshold 0
ide.AssertTracingDisabled true
ide.bootstrap.start 965447299307
ide.build MAIN-53.38
ide.conf D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.debugbuild false
ide.devbuild false
ide.extension.search.path sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun false
ide.java.minversion 1.5.0
ide.launcherProcessId 3336
ide.main.class oracle.ide.boot.IdeLauncher
ide.patches.dir ide/lib/patches
ide.pref.dir C:\Documents and Settings\macmilp\Application Data\SQL Developer
ide.pref.dir.base C:\Documents and Settings\macmilp\Application Data
ide.product oracle.sqldeveloper
ide.shell.enableFileTypeAssociation D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.exe
ide.splash.screen splash.gif
ide.startingArg0 D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.exe
ide.startingcwd D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin
ide.user.dir C:\Documents and Settings\macmilp\Application Data\SQL Developer
ide.user.dir.var IDE_USER_DIR
ide.work.dir U:\\SQL Developer
ide.work.dir.base U:\
java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
java.awt.printerjob sun.awt.windows.WPrinterJob
java.class.path ..\..\ide\lib\ide-boot.jar;..\..\lib\java\api\jaxb-api.jar;..\..\lib\java\api\jsr173_api.jar;
..\..\j2ee\home\lib\activation.jar;..\..\lib\java\shared\sun.jaxb\2.0\jaxb-xjc.jar;
..\..\lib\java\shared\sun.jaxb\2.0\jaxb-impl.jar;..\..\lib\java\shared\sun.jaxb\2.0\jaxb1-impl.jar
java.class.version 49.0
java.endorsed.dirs D:\sun\java\jdk1.5.0_06\jre\lib\endorsed
java.ext.dirs D:\sun\java\jdk1.5.0_06\jre\lib\ext
java.home D:\sun\java\jdk1.5.0_06\jre
java.io.tmpdir C:\Temp\
java.library.path D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin;.;C:\WINDOWS\system32;
C:\WINDOWS;d:\oracle\tools\dev\9_0_2\jdk\jre\bin\classic;d:\oracle\tools\dev\9_0_2\jlib;
D:\oracle\tools\dev\9_0_2\bin;d:\oracle\client\10_2_0_1\bin;
d:\oracle\dbms\xe\10_2_0_1\app\oracle\product\10.2.0\server\bin;d:\merant\pvcs\vm\win32\bin;
d:\merant\pvcs\vm\common\bin\win32;c:\windows\system32;c:\windows;c:\windows\system32\wbem;
d:\cvs\cvsnt\2_0;d:\graphviz\2_12\Graphviz\bin;d:\microsoft\windows\xp\tools;
d:\sun\java\jdk1.5.0_06\bin;d:\ruby\1_8_2\bin;u:\tools\bin;d:\pldoc\0_8_3_1;
d:\graphviz\2_12\graphviz\bin;v:\tools\bin;d:\sun\java\jdk1.5.0_06\bin; d:\pldoc\0_8_3_1;d:\graphviz\2_12\Graphviz\bin;C:\Program Files\CVSNT\
java.naming.factory.initial oracle.javatools.jndi.LocalInitialContextFactory
java.runtime.name Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version 1.5.0_06-b05
java.specification.name Java Platform API Specification
java.specification.vendor Sun Microsystems Inc.
java.specification.version 1.5
java.util.logging.config.file logging.conf
java.vendor Sun Microsystems Inc.
java.vendor.url http://java.sun.com/
java.vendor.url.bug http://java.sun.com/cgi-bin/bugreport.cgi
java.version 1.5.0_06
java.vm.info mixed mode
java.vm.name Java HotSpot(TM) Client VM
java.vm.specification.name Java Virtual Machine Specification
java.vm.specification.vendor Sun Microsystems Inc.
java.vm.specification.version 1.0
java.vm.vendor Sun Microsystems Inc.
java.vm.version 1.5.0_06-b05
jdbc.driver.home /D:/oracle/client/10_2_0_1/
jdbc.library /D:/oracle/client/10_2_0_1/jdbc/lib/ojdbc14.jar
line.separator \r\n
oracle.home D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG true
oracle.translated.locales de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version 9.0.4
orai18n.library /D:/oracle/client/10_2_0_1/jlib/orai18n.jar
os.arch x86
os.name Windows XP
os.version 5.1
path.separator ;
reserved_filenames con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sun.arch.data.model 32
sun.boot.class.path D:\sun\java\jdk1.5.0_06\jre\lib\rt.jar;D:\sun\java\jdk1.5.0_06\jre\lib\i18n.jar;
D:\sun\java\jdk1.5.0_06\jre\lib\sunrsasign.jar;D:\sun\java\jdk1.5.0_06\jre\lib\jsse.jar;
D:\sun\java\jdk1.5.0_06\jre\lib\jce.jar;D:\sun\java\jdk1.5.0_06\jre\lib\charsets.jar;D:\sun\java\jdk1.5.0_06\jre\classes
sun.boot.library.path D:\sun\java\jdk1.5.0_06\jre\bin
sun.cpu.endian little
sun.cpu.isalist pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop windows
sun.io.unicode.encoding UnicodeLittle
sun.java2d.ddoffscreen false
sun.jnu.encoding Cp1252
sun.management.compiler HotSpot Client Compiler
sun.os.patch.level Service Pack 2
user.country GB
user.dir D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin
user.home C:\Documents and Settings\macmilp
user.language en
user.name pmacmillan
user.timezone Europe/London
user.variant
windows.shell.font.languages
Extensions
Name Identifier Version Status
==== ========== ======= ======
Check For Updates oracle.ide.webupdate 11.1.1.0.22.49.35 Loaded
Code Editor oracle.ide.ceditor 11.1.1.0.22.49.35 Loaded
Database Connection Support oracle.jdeveloper.db.connection 11.1.1.0.22.49.35 Loaded
Database Object Explorers oracle.ide.db.explorer 11.1.1.0.22.49.35 Loaded
Database UI oracle.ide.db 11.1.1.0.22.49.35 Loaded
Diff/Merge oracle.ide.diffmerge 11.1.1.0.22.49.35 Loaded
Extended IDE Platform oracle.javacore 11.1.1.0.22.49.35 Loaded
External Tools oracle.ide.externaltools 11.1.1.0.22.49.35 Loaded
Feedback oracle.ide.feedback 11.1.1.0.22.49.35 Loaded
File Support oracle.ide.files 11.1.1.0.22.49.35 Loaded
File System Navigator oracle.sqldeveloper.filenavigator 11.1.1.53.38 Loaded
Help System oracle.ide.help 11.1.1.0.22.49.35 Loaded
History Support oracle.jdeveloper.history 11.1.1.0.22.49.35 Loaded
Import/Export Support oracle.ide.importexport 11.1.1.0.22.49.35 Loaded
Log Window oracle.ide.log 11.1.1.0.22.49.35 Loaded
Mac OS X Adapter oracle.ideimpl.apple 11.1.1.0.22.49.35 Loaded
Navigator oracle.ide.navigator 11.1.1.0.22.49.35 Loaded
Object Gallery oracle.ide.gallery 11.1.1.0.22.49.35 Loaded
Object Viewer oracle.sqldeveloper.oviewer 11.1.1.53.38 Loaded
Oracle IDE oracle.ide 11.1.1.0.22.49.35 Loaded
Oracle Microsoft Access Browser oracle.sqldeveloper.thirdparty.access 11.1.1.53.38 Loaded
Oracle Migration Workbench oracle.sqldeveloper.migration 11.1.1.53.38 Loaded
Oracle Migration Workbench - MS Access oracle.sqldeveloper.migration.msaccess 11.1.1.53.38 Loaded
Oracle Migration Workbench - MySQL oracle.sqldeveloper.migration.mysql5 11.1.1.53.38 Loaded
Oracle Migration Workbench - SQLServer oracle.sqldeveloper.migration.sqlserver2005 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation Core oracle.sqldeveloper.migration.translation.core 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation MS Access oracle.sqldeveloper.migration.translation.msaccess 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation MS SQL Server oracle.sqldeveloper.migration.translation.sqlserver 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation MySQL oracle.sqldeveloper.migration.translation.mysql 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation Sybase oracle.sqldeveloper.migration.translation.sybase 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation UI oracle.sqldeveloper.migration.translation.gui 11.1.1.53.38 Loaded
Oracle MySQL Browser oracle.sqldeveloper.thirdparty.mysql 11.1.1.53.38 Loaded
Oracle SQL Developer oracle.sqldeveloper 11.1.1.53.38 Loaded
Oracle SQL Developer Extras oracle.sqldeveloper.extras 1.1.1.53.38 Loaded
Oracle SQL Developer Reports oracle.sqldeveloper.report 11.1.1.53.38 Loaded
Oracle SQL Developer SearchBar oracle.sqldeveloper.searchbar 11.1.1.53.38 Loaded
Oracle SQL Developer TimesTen oracle.sqldeveloper.timesten 1.5.0.1.1 Loaded
Oracle SQL Server Browser oracle.sqldeveloper.thirdparty.sqlserver 11.1.1.53.38 Loaded
Oracle Sybase Browser oracle.sqldeveloper.thirdparty.sybase 1.2.1.53.38 Loaded
Oracle XML Schema Support oracle.sqldeveloper.xmlschema 11.1.1.53.38 Loaded
PROBE Debugger oracle.jdeveloper.db.debug.probe 11.1.1.0.22.49.35 Loaded
Peek oracle.ide.peek 1.0 Loaded
Replace With oracle.ide.replace 11.1.1.0.22.49.35 Loaded
Runner oracle.ide.runner 11.1.1.0.22.49.35 Loaded
SQL Worksheet Window oracle.sqldeveloper.sqlworksheet 11.1.1.53.38 Loaded
Search Bar oracle.ide.searchbar 11.1.1.0.0 Loaded
Snippet Window oracle.sqldeveloper.snippet 11.1.1.53.38 Loaded
Sybase 12 oracle.sqldeveloper.migration.sybase12 11.1.1.53.38 Loaded
Sybase 15 oracle.sqldeveloper.migration.sybase15 11.1.1.53.38 Loaded
Tuning oracle.sqldeveloper.tuning 11.1.1.53.38 Loaded
VHV oracle.ide.vhv 11.1.1.0.22.49.35 Loaded
Versioning Support oracle.jdeveloper.vcs 11.1.1.0.22.49.35 Loaded
Versioning Support for CVS oracle.jdeveloper.cvs 11.1.1.0.22.49.35 Loaded
Versioning Support for Subversion oracle.jdeveloper.subversion 11.1.1.0.22.49.35 Loaded
Web Browser and Proxy oracle.ide.webbrowser 11.1.1.0.22.49.35 Loaded
oracle.ide.dependency oracle.ide.dependency 11.1.1.0.22.49.35 Loaded
oracle.ide.indexing oracle.ide.indexing 11.1.1.0.22.49.35 Loaded
Thread dump:
Full thread dump Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode):
"worksheet" prio=6 tid=0x2e5f1cf0 nid=0xcec in Object.wait() [0x30e3f000..0x30e3fce8]
at java.lang.Object.wait(Native Method)
- waiting on <0x033d4858> (a java.awt.EventQueue$1AWTInvocationLock)
at java.lang.Object.wait(Object.java:474)
at java.awt.EventQueue.invokeAndWait(EventQueue.java:846)
- locked <0x033d4858> (a java.awt.EventQueue$1AWTInvocationLock)
at javax.swing.SwingUtilities.invokeAndWait(SwingUtilities.java:1257)
at oracle.dbtools.sqlworksheet.sqlview.SqlEditor$2.construct(SqlEditor.java:866)
- locked <0x06b38170> (a oracle.jdbc.driver.T4CConnection)
- locked <0x06b38170> (a oracle.jdbc.driver.T4CConnection)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:595)
"IconOverlayTracker Timer" prio=6 tid=0x2d76ca38 nid=0xb8c in Object.wait() [0x3153f000..0x3153f
9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x06cffe60> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x06cffe60> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"pool-1-thread-1" prio=6 tid=0x2e5bbad8 nid=0x354 waiting on condition [0x3103f000..0x3103fa68]
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:118)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQ
ueuedSynchronizer.java:1767)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:359)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:470)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:674)
at java.lang.Thread.run(Thread.java:595)
"Timer-2" prio=6 tid=0x2e601b18 nid=0xd20 in Object.wait() [0x30d3f000..0x30d3fae8]
at java.lang.Object.wait(Native Method)
- waiting on <0x06abcbd8> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x06abcbd8> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"TextBufferScavenger" prio=6 tid=0x2e7f2008 nid=0xdc4 in Object.wait() [0x30aaf000..0x30aafd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x068e0780> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x068e0780> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at oracle.ide.model.TextNode$FacadeBufferReference$PollingThread.run(TextNode.java:1886)
"IconOverlayTracker Timer" prio=6 tid=0x2e801f78 nid=0x700 in Object.wait() [0x2f26f000..0x2f26f
ae8]
at java.lang.Object.wait(Native Method)
- waiting on <0x060a9968> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x060a9968> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"IconOverlayTracker Timer" prio=6 tid=0x2e803d08 nid=0x33c in Object.wait() [0x2f16f000..0x2f16f
b68]
at java.lang.Object.wait(Native Method)
- waiting on <0x060a99e0> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x060a99e0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"TimerQueue" daemon prio=6 tid=0x2d926be8 nid=0xef8 in Object.wait() [0x2e13f000..0x2e13fb68]
at java.lang.Object.wait(Native Method)
at javax.swing.TimerQueue.run(TimerQueue.java:233)
- locked <0x058debd0> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=6 tid=0x2d8f8cd0 nid=0xa10 waiting for monitor entry [0x2dfce000..0x2dfc
fbe8]
at oracle.jdbc.driver.PhysicalConnection.isClosed(PhysicalConnection.java:1411)
- waiting to lock <0x06b38170> (a oracle.jdbc.driver.T4CConnection)
at oracle.dbtools.raptor.controls.cellrenderers.DefaultCellRenderer.getTableCellRenderer
Component(DefaultCellRenderer.java:103)
at javax.swing.JTable.prepareRenderer(JTable.java:3924)
at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:2070)
at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1972)
at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:1895)
at javax.swing.plaf.ComponentUI.update(ComponentUI.java:142)
at javax.swing.JComponent.paintComponent(JComponent.java:742)
at javax.swing.JComponent.paint(JComponent.java:1005)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JViewport.paint(JViewport.java:728)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JSplitPane.paintChildren(JSplitPane.java:1021)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintWithOffscreenBuffer(JComponent.java:4963)
at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4916)
at javax.swing.JComponent._paintImmediately(JComponent.java:4859)
at javax.swing.JComponent.paintImmediately(JComponent.java:4666)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:451)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilit
ies.java:114)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"AWT-Windows" daemon prio=6 tid=0x2d8df4e8 nid=0xbb4 runnable [0x2ddcf000..0x2ddcfce8]
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:269)
at java.lang.Thread.run(Thread.java:595)
"AWT-Shutdown" prio=6 tid=0x2d8df0f0 nid=0x8e8 in Object.wait() [0x2dccf000..0x2dccfd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x05872240> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x05872240> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"Java2D Disposer" daemon prio=6 tid=0x2d87d8d0 nid=0x8ec in Object.wait() [0x2dbcf000..0x2dbcf9e
8]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x058722c8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:107)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=6 tid=0x00c74c70 nid=0xa48 runnable [0x00000000..0x00000000]
"CompilerThread0" daemon prio=6 tid=0x00c73328 nid=0x9ac waiting on condition [0x00000000..0x2d0
bf84c]
"Signal Dispatcher" daemon prio=6 tid=0x00c72768 nid=0x6a4 waiting on condition [0x00000000..0x0
0000000]
"Finalizer" daemon prio=8 tid=0x00c68818 nid=0x960 in Object.wait() [0x2cebf000..0x2cebfce8]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x058201f0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=6 tid=0x00c67d60 nid=0xd0 in Object.wait() [0x2cdbf000..0x2cdbfc
68]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x05820270> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x00858ae0 nid=0x874 waiting on condition [0x00000000..0x0012fb70]
"VM Thread" prio=6 tid=0x00c283c8 nid=0x5d8 runnable
"VM Periodic Task Thread" prio=6 tid=0x00c72440 nid=0x674 waiting on condition
Message was edited by:
fac586 -
System-wide freeze when Time Machine begins back up - Mac Pro 10.7.5
I have recently upgraded my MacPro Intel Early 2008 to Lion 10.7.5 on an external drive. Overall this nice fresh install has been working very well. The problem is that every 2 hours Time Machine starts its automatic back up and then ...
A) Music playing on Spotify stops
B) Curser freezes
C) Application switching freezes
D) Current app stops working
This freeze typically lasts about 15 to 30 seconds, or until the small incremental back up is finished.
I have verified the cause using the Console and reading the activity. I read the log 4 times yesterday (it has been doing this since I upgraded a week ago) to confirm this activity. Usually the log reports the begin and finish of the backup with no activity in between, but in the freeze I just had there was activity in the middle relating to Spotify. That most recent log is shown below. For the record, nearly all of the log activity is something to do with Spotify unless I am doing some other system level process.
I have studied other threads, but the symptoms don't really match those, or I don't have the same suspect apps installed. I have run Disk Utility and Disk Warrior on the Time Machine internal drive, and it appears ok. In energy settings the hard drive disks are NOT set to sleep when possible, but the computer will sleep after an hour of inactivity.
My Time Machine is getting large and using some 90% of the disc. I think I need to redo it because the old (10.5.8 & 10.6) and new system (10.7) inadvertantly wrote to the same TM backup. Thoughts on that?
Here is the last freeze (I truncated the IP addresses) ... and thanks, I appreciate your help. L
7/12/13 10:54:14.857 AM [0x0-0x1c01c].com.spotify.client: 14:54 I [audio_streamer.cpp:538
] 64k-Latency: 2 ms. Play latency: 484 ms (ap)
7/12/13 10:58:35.743 AM com.apple.backupd: Starting standard backup
7/12/13 10:58:35.771 AM com.apple.backupd: Backing up to: /Volumes/Mac Pro Time Machine/Backups.backupdb
7/12/13 10:58:44.850 AM com.apple.backupd: 6.00 GB required (including padding), 99.59 GB available
7/12/13 10:59:02.068 AM [0x0-0x1c01c].com.spotify.client: 14:59 E [watchdog.cpp:171
] Deadlock detected (Thread: gui)
7/12/13 10:59:07.386 AM [0x0-0x1c01c].com.spotify.client: 14:59 E [watchdog.cpp:191
] The deadlock was a lie! (gui, 10533)
7/12/13 10:59:09.749 AM Firewall: Allow Spotify connecting from 64.55:9907 to port 64429 proto=6
7/12/13 10:59:11.619 AM [0x0-0x1c01c].com.spotify.client: 14:59 E [watchdog.cpp:171
] Deadlock detected (Thread: gui)
7/12/13 10:59:12.739 AM [0x0-0x1c01c].com.spotify.client: 14:59 E [watchdog.cpp:191
] The deadlock was a lie! (gui, 5120)
7/12/13 10:59:16.753 AM Firewall: Allow Spotify connecting from 184.17:65289 to port 64429 proto=6
7/12/13 10:59:16.764 AM Firewall: Allow Spotify connecting from 74.40.0:50925 to port 64429 proto=6
7/12/13 10:59:16.765 AM Firewall: Allow Spotify connecting from 68.41:58285 to port 64429 proto=6
7/12/13 10:59:16.766 AM Firewall: Allow Spotify connecting from 216.23.:1526 to port 64429 proto=6
7/12/13 10:59:16.807 AM Firewall: Allow Spotify connecting from 108.2:59770 to port 64429 proto=6
7/12/13 10:59:16.959 AM Firewall: Allow Spotify connecting from 64.203:62864 to port 64429 proto=6
7/12/13 10:59:16.967 AM Firewall: Allow Spotify connecting from 12.1747:3148 to port 64429 proto=6
7/12/13 10:59:16.986 AM Firewall: Allow Spotify connecting from 76.97.:52319 to port 64429 proto=6
7/12/13 10:59:16.997 AM Firewall: Allow Spotify connecting from 70.114:60921 to port 64429 proto=6
7/12/13 10:59:17.020 AM Firewall: Allow Spotify connecting from 66.214:62861 to port 64429 proto=6
7/12/13 10:59:46.808 AM [0x0-0x1c01c].com.spotify.client: 14:59 I [audio_streamer.cpp:538
] 64k-Latency: 2 ms. Play latency: 31 ms (ap)
7/12/13 11:00:03.592 AM [0x0-0x13013].com.stclairsoft.DefaultFolderX.helper: DFX: Finder query returned error -1701
7/12/13 11:00:12.784 AM Firewall: Allow Spotify connecting from 76.14.156.134:55682 to port 64429 proto=6
7/12/13 11:00:32.831 AM [0x0-0x3a03a].org.mozilla.firefox: NOTE: child process received `Goodbye', closing down
7/12/13 11:00:58.261 AM com.apple.backupd: Copied 2527 files (130.0 MB) from volume OSX Upgrades HD.
7/12/13 11:00:58.779 AM com.apple.backupd: 5.85 GB required (including padding), 99.46 GB available
7/12/13 11:01:04.028 AM com.apple.backupd: Copied 1265 files (2.3 MB) from volume OSX Upgrades HD.
7/12/13 11:01:05.428 AM mds: (Error) Volume: Could not find requested backup type:2 for volume
7/12/13 11:01:05.429 AM com.apple.backupd: Starting post-backup thinning
7/12/13 11:01:05.429 AM com.apple.backupd: No post-back up thinning needed: no expired backups exist
7/12/13 11:01:05.771 AM com.apple.backupd: Backup completed successfully.Hi Hatter - thanks for the info, interesting. When making these upgrades, which I resisted for as long as possible, I needed to make it as quick and painless, with "minimal" disruption in my work. It still took three weeks to plan and execute, plus it has been a week of fiddling - that is a lot of time to devote to computer maintenance. I kept the original system as a back-up in case things really went south. Also I need 10.5 because I have several active legacy client web sites in GoLive CS2, which I tried in 10.6, but it did not run well.
I agree that doing things off the internal drives is faster to operate, but my approach was prudent. Later I can swap those around. My external 10.7 drive is a WD My Passport Studio, and has had no problems (except the sucker runs pretty hot). I considered the SSD but the price is still high: NewEgg, internal 500GB regular drive today is $60 - 75, 500GB SSD is $340-370. That is a pretty big difference in a small business. I am maxed out on RAM, so that helps a lot.
One last thing though, for the Adobe Creative Suite the scratch discs are the internal drives, so it still runs fast in that sense. Fast is relative ya know, I remember programs taking 40 and 50 seconds to launch, now Photoshop is 19, barely time to drink some coffee.
I have bought a number of UPS over the years, including replacement batteries. It has been expensive frustration, because in a real emergency they seldom do what they promise. In Colorado there are big thunderstorms every summer, and I field tested them a number of times - but was never happy with the protection. Dollar for dollar, investing in a whole house (or whole office) surge arrester at the main utility panel offers protection for the equipment, with about the same amount of time to save your work (which in reality is about 1 second).
I had a ton of connection issues with Spotify working in 10.5, but I am happy to say those have completely gone away with this upgrade. I also like many of the refinements in Lion, such as the improved System Profiler.
Linc, I will will take a look at your suggestion, it is a little vaque. Am I looking for a perticular result ? I don't want to operate for too long with the firewall off.
I think my first step is getting the Time Machine figured out, that could be the whole issue.
Thanks guys for the input -- it is appreciated. L -
Gets error "-17502; System Level Exception" while running the custom Step in NI TestStnad 2010
I have a custom teststand step which works like For loop in TestStand. Previously I was using LV 2009 and NI TestStand 4.2.1 and this step was working fine. Recently I upgraded my system to LV 2010 and TestStand 2010, since that it is not working.
When I run the step it gives error "-17502; System Level Exception". I have attached error screenshot.
I am using NIFlowControl.dll in this step.
Please do the needful.
Attachments:
System Levle Exception error.JPG 25 KBThe source code for NIFlowControl.dll ships with TestStand. Did you perhaps
1) modify the code and rebuild this dll in teststand 4.2.1, but did not move your changes into the 2010 version and recompile the 2010 version?
Or
2) Move your 4.2.1 version of this dll to 2010 in which case it might be missing important code that exists only in the 2010 version. It's best to redo your code changes to the 2010 version and recompile that if needed.
Also ideally your modified version of NIFlowControl.dll should be located in the teststand public directory rather than the program files directory.
-Doug -
20" iMac freezes when running Google Earth
This is the only problem I've ever had with my Mac and it is consistent. After running Google Earth for about 10-15 minutes the screen freezes and I have to force shutdown and reboot to rectify the problem.
I did some temperature measurements at the vent in the back and noticed a considerable temperature rise when running Google Earth. I think my graphics card is getting a serious workout and may go into thermal overload.
Has anyone else experienced this?Hi dicoll
I can think of two thing that might cause the issue you describe:
_The first is how much ram is installed in your iMac?_
If your system is running low on available ram and paging out to the HD, when your running Google Earth it will cause the program to hesitate and or freeze. Try using the Activity Monitor, to monitor your ram usage and also to check for a failed process.
http://docs.info.apple.com/article.html?artnum=107918
_The second is what you describe as a thermal issue!_
To monitor temp's and fan speeds for a thermal issues there is the iStatPro widget. (Note the temp. for the GPU Diode)
http://www.apple.com/downloads/dashboard/status/istatpro.html
And then for monitoring and adjust the fan speeds there is smcFanControl Application.
http://www.macupdate.com/info.php/id/23049
Dennis -
Runtime Error! R6025-pure virtual function call when using Project Manager
Hi
I am trying to consolidate a project. I have plenty of destination HD space, 16gb RAM and am wearing the correct color socks today.
However, when I go to run media manager, I get a run time error R6025 - pure virtual function call.
I've tried the same project on two different machines and get the same result.
Has anyone come across this, and is there a fix?
Many Thanks
ADAM READ
IntermediaThanks for the reply John, but it's a codey, windows error thing. It's happening on 2 different machines, each with the same install of Premiere Pro, so I'm liable to think it's a PP issue. The MS website info on the error is very vague and certainly out of my skill set.
Perhaps I'll try the famous import into another project option.
Any other advice appreciated.
ADAM -
FCE freezes when loading project
Hello everyone!
I have a problem when loading a final cut express project. The program freezes when its in the process of opening the file.
Here is a link to a video so you can see whats happening.
https://dl.dropbox.com/u/18576059/iouiou.mov
I have tried to wait for over 8 hours to see if it would eventually start but no. It´s still just the "ball of death"
Hopefully someone have a solution for this.
I use a 2011 27 Imac with 6 GB of ram and a i5 processor.
Running Lion
If you need any more info just ask!
Sincerly HenrikThe movies are .mov with H.264-MPEG4 kodec.
I think that you are right about the codec creating the problem, because only projects with this codec is freezing. I checked all my projects and those with different codecs was working fine.
I have no problem opening a new project.
Does this mean that I have to convert the movies and reedit everything or can a just convert the clips to a propper format and then reconnect them?
Thanks for your help!
Sincerely Henrik -
Computer freezes when running RESMAN with VME crate powered down
I have lost the whole day today (thankfully it was only one day) trying to fix this annoying problem, I'm posting here in case someone runs into this same thing in the future.
Ok, the problem I was able to reproduce was:
1. Run RESMAN with the crate powered--> OK
2. Power down crate.
3. Run RESMAN: the whole computer freezes in the "Searching for Statically Configured Devices" step, no way to recover (reboot necessary)
Although this is the problem I was able to reproduce, the system also froze sometimes when not running RESMAN and powering down the crate for cards insertion or extraction.
My system:
- VME crate
- VME-MXI-2 in slot 0
- MXI-2 Cable
- PCI-MXI-2
- Windows XP Pro SP3
- NI-VXI 3.1.1 and 3.7, MAX 2.?, 3.1.1, 4.6.2, 4.7.4
It turns out MXI-2 cables are not symmetric, when I switched both ends between PCI and VME, everything worked as it should.
Here's another post of someone that had a similar problem (and whose answer didn't solve mine):
http://forums.ni.com/t5/VXI-and-VME/MAX-and-whole-comp-gets-freeze-when-I-tried-to-run-RESMAN/m-p/17...
Here's a page that describes the error: http://digital.ni.com/public.nsf/allkb/53DC9B3C2BCB6C7D862564800051EC9F
I was not able to find that page (I found it when I had already solved the problem), probably because you would never expect that a cable whose appearance is completely symmetric is in fact orientation dependent. And, no, my cable (NI original) doesn't come with any labels identifying its ends.
And here are some keywords to ease the discovery of this post using different terms
PC Computer Windows XP hangs freezes locks crashes Resman MAX Measurement and Automation Explorer MXI orientation dependant VME crate switched off powered downThis wouldn't happen to be a seagate GoFlex drive would it? I've had similar problems with that line of drives, sometimes to the point where everything stops working, and if I manually unplug it, the system catches up and starts working again.
-
"-17005 - System Level Exception" when adding extra results
Hi,
I can't find an answer to the following problem:
I defined a complex data type and used it in custom step. Further on I configured TestStand to add to results the previously defined parameters.
When running this step the execution is abnormally aborted.
The attached sequence file reproduces the error.
The environment used is TestStand 3.0 under WindowsXP.
Debugging with MSVC++ 6.0 I can see an Access Violation in TSTOBJ2.DLL, which I suspect is not handled.
Please help me out here solving this problem.
Thank you,
Silvius
Silvius Iancu
Attachments:
Error.seq 33 KBSilvius -
I remember a problem that was fixed in TestStand 3.1 and it had to do with multiple levels of types causing the problem. I tried your sequence file on TestStand 3.0 and it occurred. I tried it on TestStand 3.1 and the problem did not.
I suspect that if you do not use three levels of types and instead use two or one large type only, the problem will not occur in TestStand 3.0.
Scott Richardson (NI)
Scott Richardson
National Instruments -
ITunes 10.5 slows my system and freezes when syncing
iTunes 10.5 slows my whole system, up to 100% cpu usage at times, freezes when trying to sync my iPod, won't load iTunes store, can't download iOS 5.
Windows Vista x64
what the heck?!If you searched for 5 minutes, you'd see tons of people have this problem and there is already a fix. https://discussions.apple.com/message/16362081#16362081
-
System Preferences freezes when trying to change background
Hi,
Every time I try to change my background, system preferences freezes and I have to manually quit.
Can somebody tell me how to solve this?
Thanks.You are probably running 10.4.10 in as much as the MacBook pro's came out well after 10.4.1 was released. In any case try deleting the file com.apple.systempreferences.plist in your user/library/preferences folder.
Maybe you are looking for
-
Convert an Integer variable to a tring
Hi everyone, This Shake script below is part of a much bigger one that loads multiple SfileIns. I need to convert the integer data into a string to make it work. How can I do that ? Thanks in advance for your help. string path = "/data/job/sequence";
-
I recently tried installing Adobe Flash Player 9 OSX and I get an error message that a browser is still running on my system. I closed all of the browsers, ran disk utility to repair permissions, ran disk warrior, uninstalled flash player and still I
-
Help on JTAPI -how to work with it
hi , i want to start working with Jtapi i downloaded the class files for jtapi -it's a zip file containg classes how can i start working with it , where do i need to extarct it !! do i need a certain hardware !! and how do i compile new application i
-
recently having trouble playing streaming audio from these sites: 1. merriam webster pronunciation popup link: http://www.merriam-webster.com/audio.php?file=puissa01&word=puissance&text=\%3Cspan%20class%3D%22unicode%22%3E%CB%88%3C%2Fspan%3Epwi-s%3Csu
-
Hello I have been experiencing some problems with my sound card in my HP laptop. The sound will just stop if I have it turned up 3/4 or higher. The sound works most of the time, however there are certain times when it will just stop altogether. I'm n