System level statics reports from sol man
hi all,
how can i check system level statistics reports from solution manager.
please help me.
rgds
vinnu.
Vinay,
Can you tell us how you solved the issue?
Regards,
Jai Shankar
Similar Messages
-
Daily System Health monitoring report from SOLMAN
Hi Experts,
I am working on a project where I need to triiger a consolidated system health report from sol man, much like early watch report.
Only thing is that it should be generated daily for each system.
Well That makes the expectation.
Progress so far :-
a. Applied E2E120 for managed system ie Technical monitoring is working for that system.
Challenge :-
a. Generating a consolidated report, with checklists for system logs, dumps, qrfc / trfc's. As Technical monitoring is giving these info separately.
b. Options in technical monitoring are too many and not sure which can deliver what i am looking for.
a. IT Performance reporting
b. Service level reporting
c. SDCCN Reporting.
d. or automatic configure reporting.
c. The report has to be generated periodically only once in a day. It should not be alert monitoring that an system alert triggers a mail and management is bombarded with too many mails.
Any valuable suggestion will be very helpful and will certainly be rewarded.
Thanks
AbhijeetHi Jhansi,
few things first, I have really liked your blogs and forum discussion on Sol Man. They have been really very helpful.
Now, after spending around 2-3 days on it, Closest bet is "IT Performance reporting". With this i am compromising with consolidated report. (Just hoping management agrees for it )
But here is the new challenge I am going through. It is the web templates to use for specific checklist.
I used below link.
http://help.sap.de/saphelp_sm71_sp05/helpdata/en/3f/ecbef23769488f806177717adee541/content.htm?frameset=/en/a3/074aa01bbe4662b99bc20ec5263cf8/frameset.htm¤t_toc=/en/81/6f8fe54f854ef2bd412c8660f5ed6e/plain.htm&node_id=463
I need template for System logs, qrfc, trfc, PI messages etc. It is not present in the link provided. Even searched on SMP, it was not available. Can we manually create and use the web templates.
Also when i used such templates, I am getting following error message in the monitoring
Let me know your inputs.
Thanks
Abhijeet -
hi all,
how can i check system level statistics reports from solution manager.
please help me.
rgds
vinnu.Hi,
Your EWA alert will give you all the system level statistics report with graphs and table. Really superb feature. Did you configure EWA?
Feel free to revert back.
--Ragu -
Connecting satellite system through Sol Man
Dear friends,
I am working on Sol Man 4.0 SP 12.
I have properly set the T-RFC roles to users in both satellite system as well as in Sol Man system.
Now i want to execute the transaction MM01 (creation of material master) from Sol Man. If i execute the transaction, i am getting the message that
<b>"The new session will be created in SD1 system".</b>
The SD1 system is my R/3 dev system. But the new session is not at all getting displayed.
I could not find the reason. If there is a problem in RFC, system will clearly tell the message.
Could anyone suggest me reason for this kind of system behaviour?
Regards
SenthilDear Senthil,
Have you defined any user for the RFC's specially the Trusted RFC ? If yes is it an Dialog user or an communication user ?
Also does the userid in Satellite system have the authorization to execute MM01 ?
Regards
Amit -
Unable to create EWA in SOL MAN
Hi Experts,
I configured EWA for SOL MAN....
I successfully generating alerts for satellite systems but not for own SOL MAN
Alert running successfully with PMS and Refresh sessins with out error
my RTCCTOOL not showing any errors/requiremwents...
please suggest...
version : SAP SOLMAN EHP1
Regards,
Siva.
Edited by: skreddy555 on Jan 30, 2011 1:38 PMHello,
So you are saying you can generate EWA reports for Satellite systems but not Solman itself?
That really doesn't give any details to the problem, as what has occured and what has not.
Is the EWA scheduled? Have you run solman_setup on Solution Manager as the managed system?
If you want to generate an EWA for Soman itself, then you also need to treat it like a managed system.
IWhat it the status in solman_ewa_adm? Is it active? If it is ther eand active it should be scheduled and then there should
be something in DSWP. Is the icon a bottle? 2 Bottles? A Red Flag? A Grey Diamond, a Document?
Is the maintenace package task scheduled and running with no errors? Are you using the SM_<SID>CLNT<nnn>_BACK RFC or the NONE RFC in SDCN as the back RFC and have you tested them?
Is SM:EXEC SERVICES finishing or cancelling? If it is cancelling is there a dump?
These are some things to check. But it is hard to even gues what the problem is because you have been so vague.
If you can describe what you have done to configure, what is working, and what seems not to be working, this would help to get an idea where & what the problem may be. But you generally need to treat the Solution Manager exactly the same as a satellite system when setting it up for EWA reporting. This make is both a managed and the managing system. So you can't skip any steps just because its the managing system. If you describe the problem in more detail, and if any part in the process is working, and what is not, that is helpful.
You should see it schedulied in DWSP. If not, then it's not scheduled. But the status in DSWP can tell a lot. A Red Flag means a problem with SDCCN tasks or the RFC, a Grey Diamond means important data is misisng and the report can't be generated, so that is a probelm is data collection, two flasks indicates sm:exec services has not run or is failing.
So you really need to give more information....unless I have already touch upon your problem, I don't know how helpful people can be but toss out general information.
I'd like to help more if you can give more details to what you see and don't see that you should.
Regards,
Paul -
Report from system on different stock levels-min, max stock levels
hI gURUS,
Is there any Standard Report from SAP system to see on different stock levels-minIMUM stock, maximum stock levelsHi,
MMBE will not give stock level min and max that is maintained in material master MRP view. I think you need to make a z report for th same or may be through query.
Regards
Sangeta -
Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0
Hi All,
I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps:
1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the old sol man version 3.1.
2.Copied the cofile and datafiles from old sol man and kept in trans directory of new Sol man 4.0 version at OS level.
3.Imported the requests into the new Sol Manager 4.0 successfully
4.When I tried to open the imported project it told me to run the "solman_log_comp_mgr program" to convert the project to the central logical components. I just did it and it went well.
I can see the project and do see the document types but no document names and getting all sorts of error messages when I tried to open these documents. Also I dont see the logical components under system landscape.
Before importing, I just have configured servers/hosts, databses and all the components of system landscapes in the new solution manager.
I request you to help me solve this issue. I also would like to know whether i followed proper procedures that i listed above? If not please suggest what procedures I should have follwed.
Thanks in advance.
Aravind SerikarHi Aravind,
to transport a project from 3.1 to 4.0 I would not use SOLAR_PROJECT_ADMIN to "migrate" a project. There for we developed SOLAR_MIGRATION there you can transport system landscape info, also you can transport projects. You should only transport system landscape info if in 4.0 SMSY is EMPTY. To transport projects you have only to specify your project and define a local folder. In this folder we store a few important information. Then all information will be collected in a batch job and automatically exported. Then you have to copy the data file and the cofile into the new trans folder. BUT do NOT forget the i-file. In the folder cofiles you will find a i-file, because we export knowledge warehouse content. This file is important, if you forget it you will get a return code 8. You do NOT have to add the files in the import buffer, we will do this automatically. To import the project, you have to call SOLAR_MIGRATION in SolMan 4.0 there you have to select import, then specify the folder with the few important information. We upload the info and start the import. That is it
Regards,
uDo -
CHARM - diff between packages in file system vs sol man
Hi Experts,
We use CHARM to transport our Portal packages (e.g. EPA, KMC packages). My understanding is that these packages can be downloaded from the file system or through STMS in Solution manager. However, we noticed that for the same transport requests, it contains different packages in file system than in solution manager, which is perplexing. E.g. PD3K90009X has 1 EPA file in Solution manager while we see 3 different EPA files in file system. 1 of the EPA file matches the 1 seen in solution manager, the other 2 we found, belong to other transport requests. Any idea why for the same transport, it would contain different packages in the file system than solution manager?
Thanks,
ZMThe problem was resolved and it was largely due to missing prerequisites although the system met the required SPS17 requirement. The lesson learned here is that for newly built Sol Man 700 systems, it's best to do the basic configurations to get Maintenance Optimizer going so it can be used to select and download EHP1 packages. The traditional SMP SWDC packages selector via identification of source and target releases didn't give the complete prerequisite packages for EHP1 SAINT import.
Cheers
Ben Trinh -
OBIEE report from multiple facts at different levels
Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
Thanks in advance.Hi Vinod,
The scenario provided in the link above doesnt match to my issue.
We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
F1 is tied to dimensions D1,D2,D3,D4,d5
F2 is tied to dimensions D3,D4,D5, D6 and D7.
In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
and then does a cross fact join out of box between 2 queries.
But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
Thanks. -
Sol Man 4.0 and Reporting out to BW
We have upgraded to Sol Man 4.0 and need to report the Change Request info, Change Document info and Transports log using an external BW box. In researching this forum, I have learned that we can export data out by activating the CRM business content. I need more guidance as to what DataSources to use. So far we have activated and found data in <b>0CRM_SRV_PROCESS_H</b> and <b>0CRM_SALES_ACT_1</b>, but I am missing information such as Change Advisory Board, Subject, External Reference, Decision Date, and Implementation date to name a few. Can anyone help? Is this documented ANYWHERE?? Thank you.
Charis Davenport
Project Management Specialist
The Walt Disney CompanyDaniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan -
Does SAP system provide 3 way matching report from PO up to payment in AP
Dear expert,
Would like to seek for your help to advise, does SAP system provide 3 way matching report from PO up to payment in AP with the following information?
Vendor Number
Vendor Name
AP Document Number
AP Document Date
Payment Document Number
Payment Document Date
Payment Amount
PO reference Number and Date
Item Description
Please help.
Regards,
KHHi Atif,
Thank you for the prompt reply, however I have a few question to seek for your advise as below:
a)I would like to know does SAP system have any standard report which have the information of 3 way matching report from PO up to payment in AP module?
b) I have find one report using T-code:FBl1N (vendor line item) is able to display the report with information of invoice,payment and there is one field purchasing document in the report however this field do not have any po number refer to the invoice.
I would like to know what the field purchasing document mean for (i.e what are the information capture on the column purchasing document)?
Please help.
Regards,
KH -
Running a system report from SDK
Is it possible to run a system report such as the "Customer Equipment report" from within SDK and fixing the report selection criteria from within code? I need to be able to place a button on the BP header screen that runs the CE report for that BP without showing the first (selection criteria) screen that you would see when running the report from the menu.
This is similar to what happens when the graph symbol is used along side the BP account balance when the system presets the selection criteria for the sales analysis report.Hi Gordon
Edward is correct, you can't modify reports.
But what you can also try is to run a trace on the db and run the report. With the trace you'll be able to see exactly how sbo retrieves the data. Many times they make use of stored proceudres to do the work. So my suggestion is use there same method to obtain the info but then display it however you wish.
Hope this helps -
Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2
If there is I can not find it - Google provides a list of possible methods form Adobe and others
LN -
Steps to configure BPM report from Solman 7.00 for productive system ECC6.0
Hi all,
Please given me the steps to configure Buisness process Monitoring reports from Solman 7.0 for productive system( ECC6.0, windows & database oracle 10.2),
I wanted to create the Reports of monitoring the buisness.
Regards,
Akash Basis consultant.Thanks for replying Volker von Gloeden,
This thread is my first one in SDN & I am very glad that someone has given the answer ,
I will take a look for solution you have provided & will inform you.
Thanks again. -
Service Level Tracking Reports show no data from the data warehouse db.
Hi, I have some Service Level Tracking reports that will only show data from the last few days. If I select last month as the time frame, there is no data displayed. All of these reports have previously worked fine. Nothing to my knowledge
has changed, and it appears that the data is still being collected in the data warehouse database. Any thoughts would be greatly appreciated.Is this meant for SCOM forum
https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
Any tips? The key thing is not losing his current content! Most of his content has been downloaded with MY account to his ipod, but now hes wanting his own account, so essentially id prefer to just switch over.
-
Hi(I'm new to mac) I have two computers in my home, one is Windows based desktop computer and the other is macbook air. Both are connected to the same router. Desktop pc is connected via ethernet and macbook air via wifi. As my storage in macbook is
-
Converting a MS Access Query to Oracle SQL
Hi, We have a large number of MS Access (2000) queries (mostly select queries -Some containing sub queries-) that need to be converted to Oracle's syntax to be used on our intranet instead of the existing Access frontend. Do you know of a tool that c
-
Hi I am new to WAD. I copied the existing version of standard 0ANALYSIS_PATTER TO ZANALYSIS_PATTERN and made this as a standard template. Now i copied ZANALYSIS_PATTERN to TESTTEMPLATE and assigned my dataprovider and executed the template. Now I can
-
Swapping .FLV files with Spry
I'm trying to make an HTML page using Spry to play videos with the Spry element of the page pulling in a Title, Description and filename {clip} from an XML file. So when you click on the Title/Description it replaces the current .flv file with the ne