System Lock Administration Error
Dear All,
We are getting System Lock Administration error from few days I had read the system log in SM21 and increased the
engue space parameter in instance profile param.name:- enque/table_size earlier it was 32000 now I increased to 50000, but the problem hasnt resolved yet. Also there are no enque trace file in work directory.
Please guide me how to resolve it
Thanks & Regards
Ashutosh Awasthi
SAP-BASIS Consultant
Use the diagnosis functions:
sm12 Extras -> Diagnosis and then
sm12 Extras -> Diagnosis in update
Paste the details of the output
Similar Messages
-
Error in MB1B as System lock administration error
Hi Experts,
When I do posting in MB1B I found the error as below for some materials,
System lock administration error. Please notify your admistrator
We have checked with basis team as they said there were no lock entries for the specific users.
Can anybody guide me how to overcome this problem? Please respond ASAP.
Cheers,Kumars///HI Jurgen,
Thnks for your prompt reply...now i ask my user to to posting once again in MB1B now he is telling that he can able to post sucesfully.Also he tells me that when he do confirmation in CO11 transaction now the same problem is appearing.He refered us the COGI tansaction as well.
Also we have noticed the same problem in MIGO as well.
Now please tell me how can i go ahead with fixing this issue.
Cheers,Kumar.S/// -
System Lock error : Inform System administrator
Dear all,
One of the SAP user got this (System Lock error : Inform System administrator) error , while doing posting .
Kindly adviseHi,
Check for any lock entries in the TA SM12 and then have a look at the note 13907 System error in the block handler, overflow lock table.
Hope this helps.
_Varadhu... -
System Lock error:Inform your system administrator
dears,
i receive this error message (System Lock error:Inform your system administrator) while doing Sales order or , & MIGO. can you please help outHi,
This is not an Unicode issue, but anyway check this note:
13907 - System error in the block handler, overflow lock table.
Marco -
FBRA: System lock error inform system administrator
While trying to reset a document transaction code FBRA, am getting the error message "System lock error inform your system administrator" when I hit the save button.
how do i solve this?
You help is much obliged.
ogutuDear Ogutu,
the F5288 error message (System lock error: inform system Administrator)
appears to be caused by a table overflow as it takes place with a very
large document ie. xxxx line items. As all the items must be locked when
transaction FBRA is performed, there is not enough space in the lock
table.
Please extend the profile-parameter "enque/table_size", as per note
13907, 487347 which I have attached, in order to overcome this problem.
You have to change a parameter.
Then please remember to restart the server after extend the
profile-parameter "enque/table_size", as per note note 13907.
If you already did it and nothing changed, please increase the parameter
again.
Please be aware that You have also to implement the solution described
in note 487347. There is not only correction code, there is also some
steps to do in order to solve the incident (manual changes have to be
done in SE93):
1. Implement the corrections. The corrections are not contained in the
SAP Standard System. See Note 170183.
2. Use Transaction SE93 to create the parameter transaction FBRA_LOAC
referring to transaction FBRA. In addition to the descriptive text
'Reset Cleared Items with Account Block', you have to enter the
value FBRA in the 'Transaction' field.
3. In problematic cases, use transaction FBRA_LOAC to reset cleared
items. The transaction is not designed to replace the existing
transaction FBRA. The transaction only provides the option to reset
cleared items in case of an overflow of the lock table.
I hope this helps.
Mauri -
Hello,
We get an error "System lock error: Inform system Administrator" when we use the transaction FBRA. This error is just occurring for one particular FI document. Any idea why this could be happenning? Is this a Basis issue?
Any help will be appreciated.
Thanks,
ALAM.look like basis issue only
ask basis team if enqueu overflow is happening
can you find any long message of this error
Samrat -
System Lock Error while reset & reversing the cleared document - FBRA
Hi Experts,
Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in production systemu201D . After implementation of this note, SAP has created one new transaction code, FBRA_LOAC.
However, when we tried to reset & reverse the cleared document using t-code FBRA_LOAC, we face the same error.
Can you help me to resolve this issue ?
Thanks in advance.
Regards,
ManishHi:
We once faced these issue and got it resolved by extending parameter after extending the profile-parameter "enque/table_size", as per note note 13907. Do not forget the restart the server after extension.
Regards -
System Locking Error - WebAS 6.40 ABAP
My Netweaver 6.40 ABAP edition is now up and running. License is installed. I had to resolve an index-problem in the database layer by recreating a corrupt index via DBMCLI, but now the database seems to be fine.
But I still can't "lock" anything. When I e.g. try to change client settings in SCC4, I get an error message:
"System error: Unable to lock table/view T000".
When I try to activate a service in SICF, I get "System locking error" (SR053). It seems that the enqueue server doesn't work.
SM12 (Lock entries) diagnostics say: "System error during lock operation. Execute diagnostics in SM12" (03113). Interesting message, but not much help as I just did execute the diagnostics in SM12.
The current workprocess configuration is:
rdisp/wp_no_dia=2
rdisp/wp_no_btc=1
rdisp/wp_no_vb=0
rdisp/wp_no_vb2=0
rdisp/wp_no_enq=0
rdisp/wp_no_spo=0
Which is the default. I also tried
rdisp/wp_no_dia=2
rdisp/wp_no_btc=0
rdisp/wp_no_vb=0
rdisp/wp_no_vb2=0
rdisp/wp_no_enq=1
rdisp/wp_no_spo=0
but that did not help.
My hostname is NLVEHVHSE1NB272 (15 characters!). 6.10 could not be installed on a computer with such a long name, but 6.40 can.
My rdisp/enqname is "NLVEHVHSE1NB272_NSP_", where I would expect "NLVEHVHSE1NB272_NSP_00".
Does anybody know what the reason for my locking problems could be ? Thanks !Hi Ralf
I had an identical problem and have been able to solve it by shortening the host name to less than 13 characters.
OSS Notes 611361 and 23538 may he of help
Cheers
Grahame -
WARNING: Could not lock System prefs.Unix error code 4.
Hello
Please help me , J have very much messagess at this:
2003-12-19 17:04:57 java.util.prefs.FileSystemPreferences checkLockFile0ErrorCode
WARNING: Could not lock System prefs.Unix error code 4.
2003-12-19 17:04:57 java.util.prefs.FileSystemPreferences syncWorld
WARNING: Couldn't flush system prefs: java.util.prefs.BackingStoreException: Couldn't get file lock.Hello,
did you solve the problem meanwhile? I get the same Warnings and am looking for a solution. -
Could not lock System prefs.Unix error code -96431284
While restarting the application server, we keep getting the following errors. Is there any idea why this could be happening?
WARNING: Couldn't flush system prefs: java.util.prefs.BackingStoreException: Couldn't get file lock.
22:31:22,046 ERROR [STDERR] Oct 30, 2006 10:31:22 PM java.util.prefs.FileSystemPreferences checkLockFile0ErrorCode
WARNING: Could not lock System prefs.Unix error code -96431284.
22:31:22,047 ERROR [STDERR] Oct 30, 2006 10:31:22 PM java.util.prefs.FileSystemPreferences syncWorld
Here is the JVM details
java version "1.4.1_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_05-b01)
Java HotSpot(TM) Client VM (build 1.4.1_05-b01, mixed mode)Not sure whether this is the solution, but based on other forum discussion i did the following
1) Restarted the application with "root"
2) brought the application down
3) Again restarted application with the java user
I don't see this issue happening anymore. -
Dear all experts, i am trying hard to solve this problem on solaris 10.
i downloaded java package i.e jdk-6u18-solaris-i586.tar.Z and extract it using zcat jdk-6u18-solaris-i586.tar.Z | tar -xf - . it extracted successfully following folders.
SUNWj6cfg
SUNWj6dev
SUNWj6dmo
SUNWj6jmp
SUNWj6man
SUNWj6rt
plus few others
i tried to install all of the above using command pkgadd -d . SUNWj6rt SUNWj6dev SUNWj6cfg SUNWj6man SUNWj6dmo.
all of the package succesfully installed except one i.e SUNWj6cfg
i got following error message
[Do you want to continue with the installation of <SUNWj6cfg> [y,n,?] y
Installing JDK 6.0 Host Config. (1.6.0_18) as <SUNWj6cfg>
## Installing part 1 of 1.
[ verifying class <none> ]
cp: /etc/.java/.systemPrefs/.system.lock not found
cp: /etc/.java/.systemPrefs/.systemRootModFile not found
[ verifying class <preserve> ]
ERROR: attribute verification of </etc/.java/.systemPrefs/.system.lock> failed
pathname does not exist
ERROR: attribute verification of </etc/.java/.systemPrefs/.systemRootModFile> fa
iled
pathname does not exist
## Executing postinstall script.
Installation of <SUNWj6cfg> partially failed.]
i am trying hard to find out what is the problem.
thanks in advance
Mr parkar
UAEmake sure your package is in WEB-INF\classes\ directory
or if it is in a jar file, make sure it is in WEB-INF\lib\ directory -
Dear all experts, i am trying hard to solve this problem on solaris 10.
i downloaded java package i.e jdk-6u18-solaris-i586.tar.Z and extract it using zcat jdk-6u18-solaris-i586.tar.Z | tar -xf - . it extracted successfully following folders.
SUNWj6cfg
SUNWj6dev
SUNWj6dmo
SUNWj6jmp
SUNWj6man
SUNWj6rt
plus few others
i tried to install all of the above using command pkgadd -d . SUNWj6rt SUNWj6dev SUNWj6cfg SUNWj6man SUNWj6dmo.
all of the package succesfully installed except one i.e SUNWj6cfg
i got following error message
[Do you want to continue with the installation of <SUNWj6cfg> [y,n,?] y
Installing JDK 6.0 Host Config. (1.6.0_18) as <SUNWj6cfg>
## Installing part 1 of 1.
[ verifying class <none> ]
cp: /etc/.java/.systemPrefs/.system.lock not found
cp: /etc/.java/.systemPrefs/.systemRootModFile not found
[ verifying class <preserve> ]
ERROR: attribute verification of </etc/.java/.systemPrefs/.system.lock> failed
pathname does not exist
ERROR: attribute verification of </etc/.java/.systemPrefs/.systemRootModFile> fa
iled
pathname does not exist
## Executing postinstall script.
Installation of <SUNWj6cfg> partially failed.]
i am trying hard to find out what is the problem.
thanks in advance
Mr parkar
UAEThese are innocuous errors that you may safely ignore. However the disk error is a problem. Do the following:
Repairing the Hard Drive
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
BAPI_REQUIREMENTS_CREATE gives System Lock Error
Hi All,
When I am creating the Material Requirements Plan using BAPI_REQUIREMENTS_CREATE then everything works fine but at random intervals for a bunch of materials it is giving System Lock Error message.
so I did like this
loop at..
BAPI_REQUIREMENTS_CREATE
BAPI_TRANSACTION_COMMIT
dequeue_all. (function module)
endloop.
Still didnt help.
Please suggest me any other reasons..Hi
Refer This Link
Re: BAPI for MD61
Ranga -
Hello Experts,
I am trying to use this bapi /SAPMP/BAPI_ROUTING_PROCESS for changing the routing. Am marking the change mode in import parameters of this bapi and filling the task, material allocation, sequence and operation tables with tasklist and group.
On executing this bapi, i am getting several errors like "Header cannot be locked(lock management error) in task table and "Operation cannot be locked(lock management error) in operation table.
Please help me out of this issue.
Regards,
VijayalakshmiYou have to fill parameter WORKAREA with the value from tcode op77
-
I have HP ENVY Model 4-1110ET.showing Intel (r) AT Supported system lock due to: platform attack detected. Time left...... Please select one of the following for platform recoery: 1 - User Password 2 - Server Token Password. I forgot my password please help me I am unable to boot my Laptop.
Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that your system is locked due to the anti-theft protection. Please see the following to get the help you need. Telephone Support for the Intel® Anti-Theft Service Provided by McAfee
Maybe you are looking for
-
Plans for enhanced access controls inside of workspaces?
Hello, Are there any plans to do the following, Provide 'participant' role to most documents inside of a workspace, while and also granting 'viewer' role to same person for a few files in that workspace? Provide the ablity to assign 'viewer' role to
-
Hi. I can't seem to install iTunes 10.5 on my Windows Vista Starter laptop.
Each time I try (about six times in the past 5 hours), this pops up: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I've tr
-
Upgrade from CS3 to CS6 Web & Design Premium
I am currently running CS3 32-bit on my 64 bit Windows 7 system. I have purchased CS6 - should I completely remove CS3 before I install CS6?
-
Newbe Flash Lite 2.0 developer
Hey I just bought a new phone, a nokia 6110 and saw that it had Flash Lite 2.0 pre-installed. I have done some Flash development before in Flex for as3.0. I have been reading up on Flash Lite 2.0 and it seams like it's equal to Flash 7? Also when the
-
I keep having to reloading Flash player
Every month or so I have to reload Flash Player. I know this because every morning I go to the USA Today site and download the crossword. This morning the page loaded but no crossword appeared. I downloaded and installed Flash player and opened up