System Lock error:Inform your system administrator

dears,
i receive this error message (System Lock error:Inform your system administrator) while doing Sales order or , & MIGO. can you please help out

Hi,
This is not an Unicode issue, but anyway check this note:
13907 - System error in the block handler, overflow lock table.
Marco

Similar Messages

FBRA: System lock error inform system administrator

While trying to reset a document transaction code FBRA, am getting the error message "System lock error inform your system administrator" when I hit the save button.
how do i solve this?
You help is much obliged.
ogutu

Dear Ogutu,
the F5288 error message (System lock error: inform system Administrator)
appears to be caused by a table overflow as it takes place with a very
large document ie. xxxx line items. As all the items must be locked when
transaction FBRA is performed, there is not enough space in the lock
table.
Please extend the profile-parameter "enque/table_size", as per note
13907, 487347 which I have attached, in order to overcome this problem.
You have to change a parameter.
Then please remember to restart the server after extend the
profile-parameter "enque/table_size", as per note note 13907.
If you already did it and nothing changed, please increase the parameter
again.
Please be aware that You have also to implement the solution described
in note 487347. There is not only correction code, there is also some
steps to do in order to solve the incident (manual changes have to be
done in SE93):
1. Implement the corrections. The corrections are not contained in the
     SAP Standard System. See Note 170183.
2. Use Transaction SE93 to create the parameter transaction FBRA_LOAC
     referring to transaction FBRA. In addition to the descriptive text
     'Reset Cleared Items with Account Block', you have to enter the
     value FBRA in the 'Transaction' field.
3. In problematic cases, use transaction FBRA_LOAC to reset cleared
     items. The transaction is not designed to replace the existing
     transaction FBRA. The transaction only provides the option to reset
     cleared items in case of an overflow of the lock table.
I hope this helps.
Mauri

System Lock error : Inform System administrator

Dear all,
One of the SAP user got this (System Lock error : Inform System administrator) error , while doing posting .
Kindly advise

Hi,
Check for any lock entries in the TA SM12 and then have a look at the note 13907 System error in the block handler, overflow lock table.
Hope this helps.
_Varadhu...

System Lock error

Hello,
We get an error "System lock error: Inform system Administrator" when we use the transaction FBRA. This error is just occurring for one particular FI document. Any idea why this could be happenning? Is this a Basis issue?
Any help will be appreciated.
Thanks,
ALAM.

look like basis issue only
ask basis team if enqueu overflow is happening
can you find any long message of this error
Samrat

Installed FSCM 9.2 Demo w/ tools 8.53 on OEL 6, Oracle DB, Booted Web/App/Prcs ok, but error "Authorization Error -- Contact your Security AdministratorAuthorization" on page

Installed FSCM 9.2 Demo w/ tools 8.53 on OEL 6, Oracle DB, Booted Web/App/Prcs ok, but error "Authorization Error -- Contact your Security Administrator" on page. Has anyone encounter this issue. I have done most of the usual troubleshooting already.

Hi,
Roles linked to users are stored table psroleuser.
When I run following sql statement in my FSCM 9.2 demo env for user VP1, it returns 95 roles.
select * from psroleuser where roleuser = 'VP1';
And my environment is a ootb demo installation.
Here is an export of my config that you can try to load in your env, but something has definitely gone wrong for your env.
For a list of PeopleTools Security tables have a look at following blog
PeopleTools Security - PeopleSoft Wiki
REM INSERTING into psroleuser
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ADS Designer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTF Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTF Editor','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTF User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Query Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PeopleTools','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Catalog Partner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CC_ADMINISTRATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CC_USER_PO','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CC_USER_REQ','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CLAIMS_MGR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CLERK','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','XMLP Power User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','VMI Manager','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','XMLP Report Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_EXPENSE_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_INV_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOEN_USER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ePro Buyer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ePro Admin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Server','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','IT Asset Manager','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ITEMLOAD_CONTACT','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PAPP_USER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PBM User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PeopleSoft User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EMPLOYEE','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Employee North America','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Ent Utilities Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOPP_USER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Event Buyer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Event Seller','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Forecaster','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Grants Super User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EX_EMPLOYEE','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','MIN Adminstrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Connected Queries Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PeopleSoft Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Integration Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Supplier Contract Interested','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Supplier-Application Admin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','UPG_ALLPNLS','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','UPG_APPSRVR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','VICE PRESIDENT','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','System Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Treasurer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOTF_ADMIN','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ProcessSchedulerAdmin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Project Owner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Grants Workflow By Pass','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Inventory Policy Planner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CONSUMER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','DEALING MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PivotGridAdmin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTLT_IMPLEMENTER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTLT_INTERNAL_APPS','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Translation Utilities','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ADMINISTRATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','AM_SS_ACCOUNTING_CLERK','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTLT_PROJECT_MGR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','RE_ADMIN','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Security Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SETTLEMENT_MGR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_ADMINISTRATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_COORDINATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_EXECUTIVE','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','RE_SUPER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOTL_Admin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_INVOICE_MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_PLOG_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_PROVIDER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_PROVIDER_CONTACT','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_REQUESTER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_TIME_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_WO_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SUPERVISOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Supplier Contrct Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Demand Planner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Employee','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Plan Approver','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Portal Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ReportSuperUser','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','AM_SS_MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','App Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','BAM Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','BANK MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Budget Approver','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Call Center Agent','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Call Center Specialist','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Cash Manager','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Catalog Administrator','N');

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026Z

OK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money.

Critical Error: An unhandled error has occurred. Please contact your system administrator.

Hi all,
Does anyone have any idea what the following error relates to?
"Critical Error: An unhandled error has occurred. Please contact your system administrator.
Debug information:
System.IO.FileNotFoundException; Could not load file or assembly 'Microsoft.VisualStudio.QualityTools.UnitTestFramework, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified."
I'm stumped!

Hi iAmCasio,
Have you made any changes before we meet this issue?
When do we receive this error message?
As my point of viewer, this issue is related to the Microsoft.VisualStudio.QualityTools.UnitTestFramework.
To receive better support about Visual Studio, we could seek help from studio forum.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Error Message: No approval workflow found. Inform system administrator

Dear Gurus,
I've encounter this error message when I'm creating a shopping cart. "No approval workflow found. Inform system administrator"
I've checked the conditions at "SWB_COND" and it looks fine.
I've check Event Type Linkage "t-code SWETYPV" and its active "SAVED". It links to function module SWB_CHECK_FB_START_COND_EVAL.
Cost Centers and HOD are maintain correctly.
Need your advice.
Regards,
Santthi.

Hi,
The message you are getting i.e. "No approval workflow found. Inform system administrator" is because no workflow has been activated properly for the business object BUS2121(for the Shopping Cart).
Please check the following:
In SWE2,check whether the event linkage is activated for any of the workflows for the object BUS2121.If atleast one of the workflows for BUS 2121 has been activated,you should not get the message.
If any of the workflows has been activated,please check whether the start conditions for that workflow has been activated or not.Even if the start conditions have not been activated,the error message should not appear as the start conditions need to be checked when 2 workflows are activated in the system for business object BUS2121 for shopping cart.
If more then 1 workflow is activated,check the start conditions for these workflows.
BR,
Disha.

Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.

Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar.

OracleJSP: An error occurred. Consult your application/system administrator

hello friends,
i installed a soa patchset 4 (7272722) over soa suite 10.1.3.1.0 in a solaris sparc machine.the installation was sucessful.i followed the docs during the installation like running the scripts etc. after finishing the installation the bpel console can be opened but when i go for configuration n administration i get this error..n even when viewing the instances for a process
OracleJSP: An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param debug_mode to "true" to see the complete exception message.
whats the problem with the soa suite ?...what can i do to solve the problem....plz its very urgent and am a starter in oracle bpel

Switch yourself to administrator mode ;-) and check the log files. Esp. the ones in $SOA_HOME/opmn/logs are of interest. Look for any java stack traces that are related (in time) to your request.
When you contact Oracle Support you must provide much more information than this little snippet...
--olaf

Error Message "feature has been locked by system administrator"

I recently moved and tried to reconnect my priniter to the new wireless network but I get an error message saying, "this feature has been locked by your system administrator or person who the person who setup the printer." When I set up the priniter it did not ask me for a password and I have no idea how to unclock the wireless wizard. HELP!

You might have had a nice neighbor who did that for you.
What printer do you have?
You could try restoring the printer to factory. That feature is in the settings menu on most printers.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

HT3228 Can not get email, error message says:contact your system administrator

Suddenly can not get my mail on iPad but can access on home computer. Tried reboot did not work. Error message says : system error contact your system administrator

Some POP email accounts don't allow multiple connections, you might be seeing some type of lockout.
Take a look at this Apple article for more information -> iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)

Hi All,
I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
I gave access to only procurement and spend catalog folder reports and Dashboards.
When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
Its BI Apps 7.9.6.3 installation.I gave read access to group to all procurement and spent subject area.
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
Please help me in resolving this issue and getting results on Dashboard.
Thanks in advance
Thanks,
Sandeep

Check your query or connection pool settings etc

System Lock error:Inform your system administrator

Similar Messages

Maybe you are looking for