System.log filling up with: mbp kernel[0]: dp events: 0x04

Dec 21 17:09:52 mbp kernel[0]: dp events: 0x04
This line seems to repeat 5 or 6 times per minute, filling system.log.
Looks like it started Dec 19th. I don't see any obvious unusual thing I did at that time.
Any ideas?
Thanks, jeff

Although Apple has not fixed this yet, I have learned some interesting things. While on the phone with Apple, they had me run a Data Capture program to collect info about my system to send back to them.
While running the application, I had Console open so I could look at the system log. To my surprise, after running this application, the repeating dp events: 0x04 completely stopped and the mouse cursor behaved normally. The mouse continued to behave normally until I put the computer to sleep and woke it up again.
In summary:
1) The dp events: 0x04 messages are present when the mouse skips and not present when it doesn't. This seems like proof that the muliple writes to the system log are what make the cursor skip.
2) Running Capture Data.app (from the Apple tech) runs a handful of scripts that not only capture data, but also kills the dp events for some reason.
I have verified this four different times and reported my findings to the Apple tech I was speaking to.
Can anyone else who receive the data capture program from Apple give this a shot? Just have Console open and look at your system log before, during, and after running the program. Perhaps you'll see as I did that the dp events go away and your mouse works right (at least until sleep).

Similar Messages

  • System.log fills up with uninstall_folder_path no 0

    My system.log fills up with the following text:
    Apr 10 22:09:48 Macken DelMonitor[60]: hokan
    Apr 10 22:09:48 Macken DelMonitor[60]: uninstall_path no 0
    Apr 10 22:09:48 Macken DelMonitor[60]: uninstall_folder_path no 0
    Apr 10 22:09:50 Macken DelMonitor[60]: install_path yes
    These four lines adds every other second, and just fills upp the system.log.
    I habe tried to google but can not find any clues to what this is and how to make it stop!
    Anyone have any suggestions?
    I have a Mac Book Pro with verson 10.7.3
    Regards,
    Hokan

    It's some third-party software that you installed, but I can't be more specific. If you can't figure it out any other way, you'll just have to start uninstalling things until the log messages stop.

  • System.log fills up with bad packets errors (Multicast packet - CRC error)

    Hello,
    I've been trying to Google my problem but found no answers; hopefully someone can help me?
    Whenever I'm online, my System.logs fills up (every second, and sometimes, multiple times each second) with the following message :
    19/12/07 12:51:01 PM kernel AppleYukon2 - bad packet received. length: 60, packet status bits: Multicast packet, CRC error
    19/12/07 12:51:01 PM kernel AppleYukon2 - bad packet received. length: 60, packet status bits: Multicast packet, CRC error
    My DSL modem is connect directly into my iMac. It's a Speedstream 5360). I never have any problems connecting to the Internet and the speed I get is fine. When I configured my Network settings, I only added my PPPoE Service name username and âssword - everything else was automatically added (Ethernet configuration).
    Is there anything I should change in the Advanced Settings?
    The System.log causes me problem because it often causes the application Console to crash when I try to view it.

    I should add that this problem didn't exist when I was using Tiger.
    Also, when I called Apple Tech Support, I was simply told "just don't play with the Console".

  • System.log filling up with enqueueData rtn message

    I'm seeing the following log entry in system.log 7-9 times a second:
    Oct 22 11:00:00 pbair-paulywalnutz-com kernel[0]: ttyioss9000003: enqueueData rtn (e00002d8)
    I've tried googling and checked discussions here but can't find anything that seems to be related.
    I don't think it's affecting my PB all that much but it is definitely not right and I would like to fix it.
    Please let me know any information I might post that would help diagnose, etc...
    Thanks,
    Paul

    I contacted technical support for Software-Systeme (what the company is not called Bresink as I posted earlier).
    They replied promptly with what seems to be the answer…
    Hardware Monitor Support wrote:
    The error message indicates that you have configured Hardware Monitor
    to send its current readings to an external LCD display box. However,
    this box appears to have a technical problem or you have no such device
    connected. To switch this off, open "Preferences > LCD Module", select
    the USB device and set "Configure for display type" to "No display".
    This works for me and stops the logs filling with the messages. I'm not sure when I set the LCD display settings, but I imagine it was when I was learning what the settings do.
    Just select the items in the top 'lcd module settings' table and set them to no display.
    Drew

  • System.log fills up with  mDNSResponder[17]

    My system.log will be filled in a 1 second intervall by the following message:
    25.12.07 17:58:25 mDNSResponder[17] Failed to obtain NAT port mapping from router 192.168.0.1 external address 0.0.0.0 internal port 22 (ports are different).
    Does any body have an idea what I have wrong configured. I'm using a router DGL-4300.
    reagrds
    wholler

    Sure. This is what I gleaned from a mere 2 seconds with the Berkley packet monitor. I don't know if it is very usable, but at least you can see how bad my router was getting spammed:
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(I0''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(K<'
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49773
    Byte count: 396
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    123
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
    nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49774
    Byte count: 390
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(5A''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49776
    Byte count: 390
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E( ''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49778
    Byte count: 385
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49780
    Byte count: 385
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49779
    Byte count: 98
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    0
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.145
    Source Port: 49781
    Destination IP: 192.168.0.1
    Destination Port: 4444
    Byte count: 919
    Raw Data:
    4CPOST /wipconn HTTP/1.1
    Content-Type: text/xml; charset="utf-8"
    SOAPAction: "urn:schemas-upnp-org:service:WANIPConnection:1#DeletePortMappin
    g"
    User-Agent: Mozilla/4.0 (compatible; UPnP/1.0; Windows 9x)
    Host: 192.168.0.1:4444
    Content-Length: 604
    Connection: close
    Pragma: no-cache
    <?xml version="1.0"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/
    " SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-E
    NV:Body><m:DeletePortMapping xmlns:m="urn:schemas-upnp-org:service:WANIPConn
    ection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:d
    t="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-
    com:datatypes" dt:dt="ui2">9999</NewExternalPort><NewProtocol xmlns:dt="urn:
    schemas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol></m:DeleteP
    ortMapping></SOAP-ENV:Body></SOAP-ENV:Envelope>
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(#''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.145
    Source Port: 49784
    Destination IP: 192.168.0.1
    Destination Port: 4444
    Byte count: 1432
    Raw Data:
    4EPOST /wipconn HTTP/1.1
    Content-Type: text/xml; charset="utf-8"
    SOAPAction: "urn:schemas-upnp-org:service:WANIPConnection:1#AddPortMapping"
    User-Agent: Mozilla/4.0 (compatible; UPnP/1.0; Windows 9x)
    Host: 192.168.0.1:4444
    Content-Length: 1119
    Connection: close
    Pragma: no-cache
    <?xml version="1.0"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/
    " SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-E
    NV:Body><m:AddPortMapping xmlns:m="urn:schemas-upnp-org:service:WANIPConnect
    ion:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="
    string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-com
    :datatypes" dt:dt="ui2">9999</NewExternalPort><NewProtocol xmlns:dt="urn:sch
    emas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol><NewInternalPo
    rt xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">9999</NewInter
    nalPort><NewInternalClient xmlns:dt="urn:schemas-microsoft-com:datatypes" dt
    :dt="string">192.168.0.145</NewInternalClient><NewEnabled xmlns:dt="urn:sche
    mas-microsoft-com:datatypes" dt:dt="boolean">1</NewEnabled><NewPortMappingDe
    scription xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">iC99
    99</NewPortMappingDescription><NewLeaseDuration xmlns:dt="urn:schemas-micros
    oft-com:datatypes" dt:dt="ui4">0</NewLeaseDuration></m:AddPortMapping></SOAP
    -ENV:Body></SOAP-ENV:Envelope>
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49784
    Byte count: 385
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(T.''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(1''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49785
    Byte count: 396
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    123
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
    nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(,''
    Start Time: 23:27:16
    Last Hit: 23:27:16
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(P(z''
    Start Time: 23:27:16
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49787
    Byte count: 396
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    123
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
    nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(7$''
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(|J''
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49789
    Byte count: 93
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49790
    Byte count: 390
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(t''
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.145
    Source Port: 49791
    Destination IP: 192.168.0.1
    Destination Port: 4444
    Byte count: 919
    Raw Data:
    4JPOST /wipconn HTTP/1.1
    Content-Type: text/xml; charset="utf-8"
    SOAPAction: "urn:schemas-upnp-org:service:WANIPConnection:1#DeletePortMappin
    g"
    User-Agent: Mozilla/4.0 (compatible; UPnP/1.0; Windows 9x)
    Host: 192.168.0.1:4444
    Content-Length: 604
    Connection: close
    Pragma: no-cache
    <?xml version="1.0"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/
    " SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-E
    NV:Body><m:DeletePortMapping xmlns:m="urn:schemas-upnp-org:service:WANIPConn
    ection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:d
    t="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-
    com:datatypes" dt:dt="ui2">9999</NewExternalPort><NewProtocol xmlns:dt="urn:
    schemas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol></m:DeleteP
    ortMapping></SOAP-ENV:Body></SOAP-ENV:Envelope>
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49792
    Byte count: 390
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49793
    Byte count: 391
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    123
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
    nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49794
    Byte count: 98
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    0
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(p''
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49796
    Byte count: 385
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49797
    Byte count: 391
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    123
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
    nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49798
    Byte count: 390
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    11d
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
    tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E( 3''
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: TCP
    Source IP: 192.168.0.1
    Source Port: 4444
    Destination IP: 192.168.0.145
    Destination Port: 49799
    Byte count: 396
    Raw Data:
    HTTP/1.1 200 OK
    SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
    EXT:
    Transfer-Encoding: Chunked
    123
    <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
    velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
    <div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
    nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
    0
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: ICMP
    Source IP: 192.168.0.1
    Source Port: 0
    Destination IP: 192.168.0.145
    Destination Port: 0
    Byte count: 48
    Raw Data:
    E(#''
    Start Time: 23:27:17
    Last Hit: 23:27:17
    Protocol: UDP
    Source IP: 192.168.0.145
    Source Port: 5353
    Destination IP: 192.168.0.1
    Destination Port: 5351
    Byte count: 12
    Raw Data:
    -----------------------------------------------------------------------

  • System.log filling with error messages

    After SL update my system.log if filling with error messages.
    Does any process delete the system.log periodically?
    What's causing this error? Getting thousands of them.
    9/30/09 12:08:13 PM [0x0-0x12012].com.nowsoftware.nowxagent[181] at now.swing.NProgressBar.fixAppleAnimationBug(null:-1)

    JHF45 wrote:
    After SL update my system.log if filling with error messages.
    Does any process delete the system.log periodically?
    Yes. There are three automatic jobs that run daily, weekly, and monthly doing this sort of thing. They run in the early hours of the morning if your Mac is awake, or shortly after it wakes up if it was sleeping. In Leopard, if it was powered-off, they won't run; I don't know if it's the same in Snow.

  • SATA driver flooding System.log, filling up startup disk

    My system.log seems to be filling up with SATA error messages, about 10 per second. The log is now so large that I can't even get the Console app to open it (only in Open Quick, which seems to show little snippets of the log only).
    This seems to have started when I installed an Initio 1623 SATA controller as part of a GraniteDigital drive upgrade. The controller worked, the drives worked. I've since pulled the controller card, but it seems the driver continues to flood the log file!
    The drivers for the controller are apparently built in to OSX (at least in 10.4.7...) so there is no way to update the driver separately.
    Restarting the machine hasn't helped. For now, I have to keep moving files to other disks to keep this G5 functioning.
    How can I A) delete the log file to gain some time?
    B) make this error stop?
    Thanks.

    Well - maybe it isn't a SATA driver system.log. I can't read the system.log because it keeps refreshing so the data in on the screen for less than a second before it refreshes. AND there is so much disk thashing that the system is barely responsive.
    The only visible log entries are:
    Jul 19 04:28:10 Platinum kernel[0]: Inic1622: SATA - Int no command active (repeated about ten times)
    Jul 19 04:28:10 Platinum kernel[0]: and active
    and repeat....
    The log file is showing a size of 4.5 GB

  • Log filling up with crlcache.db errors

    I posted an earlier question where my log was filling up with errors from Adobe Air.
    I corrected that issue by clearing the adobe keychain.
    My logs are still filling, however, with the following:
    8/2/11 3:42:46.057 PM sandboxd: ([390]) WebProcess(390) deny file-read-data /private/var/db/crls/crlcache.db
    This only happens when I'm running safari.
    I've tried recreating an empty /private/var/db/crls folder but it immediately started happening again.
    Thoughts?

    I believe its fixed.
    open Keychain Access then select Keychain Access -> Keychain First Aid
    Run a repair
    Select the crlcache.db keychain and right click -> delete files and associations
    Run a repair
    I had to do the set twice until crlcache.db was no longer in my keychain.   After it was removed, the logs no longer posted when I used safari.

  • System.log contains multiple occurrences of "kernel[0]: disk1s9: ioctl('"

    In investigating some possibly unrelated issues, I noticed that my system.log contains multiple instances of the following item, sometimes many of them quite close together:
    Dec 14 13:09:17 Walkers-G4 kernel[0]: disk1s9: ioctl('
    I've determined that disk1s9 is my boot drive. This entry looks like there ought to be something after "ioctl('", but there isn't.
    At any rate, these don't look normal to me. Should be I be concerned?

    There were no responses, and this article is old, so I'm marking it as "solved" so as to no clog up my "questions" queries. Sigh.

  • [workaround] log filling up with "ACPI group/action undefined"

    I use Arch with a HP 510 notebook and my /var/log/messages.log is filled up with:
    Aug 19 14:15:36 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:15:36 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:15:36 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:15:36 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:15:36 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:15:36 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:06 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:06 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:06 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:06 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:06 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:06 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:06 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:07 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:07 hp510 logger: ACPI group/action undefined: video / C054
    Aug 19 14:16:07 hp510 logger: ACPI group/action undefined: video / C054
    Any suggestions?
    Last edited by fijam (2009-08-20 22:35:10)

    Turns out that the message is triggered when the laptop's lid is closed for more than a few seconds. I have no idea if that's a bug but I worked it around in handler.sh before the catch-all condition like that:
    video)
    case "$2" in
    C054) : ;;
    *) logger "ACPI video action undefined: $2" ;;
    esac
    It's probably the Wrong Way but I am quite sleepy and it appears to be working.
    Thanks for suggestions.

  • Accounting Log filling up with useless data

    I am getting my ACS Accounting logs filled with useless data from about 12 devices. I think I have found the cause - I just don't know how to fix it.
    The accounting data has a username we have not used for months, and I stumbled upon this by looking at various show commands on the devices that are causing the problem.
    When I do a "sh aaa sessions", I see this:
    CE-WIN-IDF16-3750-Stack1#sh aaa session
    Total sessions since last reload: 189
    Session Id: 1
       Unique Id: 127
       User Name: *not available*
       IP Address: 0.0.0.0
       Idle Time: 0
       CT Call Handle: 0
    Session Id: 354
       Unique Id: 263
       User Name: cenetmgmt
       IP Address: 10.62.7.15
       Idle Time: 0
       CT Call Handle: 0
    Session Id: 626
       Unique Id: 410
       User Name: leehoyle
       IP Address: 10.62.7.15
       Idle Time: 0
       CT Call Handle: 0
    I would LOVE to get rid of that Session ID: 354 if I could. I can't seem to find a suitable "clear" command. Any help out there?
    Thansk in advance!
    Lee Hoyle

    I am not trying to access anything I keep getting the message that my cloud is full than go to it to find that is is full of things from my computer and pictures from the Sims game spent 3 hours yesterday as it kept telling me that Verizon was not available. Why is my cloud not backing up my phone but randomly backing up my computer which I do not need. This is using the desktop Icon. I have not even opened it on my desktop until I tried to delete the stuff on it it did this on its own.

  • The system log is full with this !!!   Can you help me?

    Hi gurus, please, I need your help.
    Our log is fulled with an error ( I mean aroung 10 MB of logs with the same error)
    Please, !! We are in SP15 EP 7.0
    java.util.zip.ZipException: error in opening zip file
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:111)
         at java.util.zip.ZipFile.<init>(ZipFile.java:127)
         at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchiveInfo(AbstractLog.java:328)
         at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchives(AbstractLog.java:455)
         at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchives(AbstractLog.java:478)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.getAttribute(DefaultMBeanInvoker.java:129)
         at javax.management.StandardMBean.getAttribute(StandardMBean.java:229)
         at com.sap.pj.jmx.server.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1296)
         at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getAttribute(MBeanServerWrapperInterceptor.java:181)
         at com.sap.engine.services.jmx.CompletionInterceptor.getAttribute(CompletionInterceptor.java:309)
         at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.getAttribute(BasicMBeanServerInterceptor.java:169)
         at com.sap.jmx.provider.ProviderInterceptor.getAttribute(ProviderInterceptor.java:195)
         at com.sap.engine.services.jmx.RedirectInterceptor.getAttribute(RedirectInterceptor.java:232)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
         at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.getAttribute(MBeanServerSecurityWrapper.java:234)
         at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:522)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
         at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.getLogInfo(LogControllerFacade.java:227)
         at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.getLogInfosWithPattern(LogControllerFacade.java:193)
         at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.getLogInfos(LogControllerFacade.java:174)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.getAttribute(DefaultMBeanInvoker.java:129)
         at javax.management.StandardMBean.getAttribute(StandardMBean.java:229)
         at com.sap.pj.jmx.server.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1296)
         at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getAttribute(MBeanServerWrapperInterceptor.java:181)
         at com.sap.engine.services.jmx.CompletionInterceptor.getAttribute(CompletionInterceptor.java:309)
         at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.getAttribute(BasicMBeanServerInterceptor.java:169)
         at com.sap.jmx.provider.ProviderInterceptor.getAttribute(ProviderInterceptor.java:195)
         at com.sap.engine.services.jmx.RedirectInterceptor.getAttribute(RedirectInterceptor.java:232)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
         at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.getAttribute(MBeanServerSecurityWrapper.java:234)
         at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:522)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.tc.logviewer.mbean.LocalLVMBeanServer.invoke(LocalLVMBeanServer.java:73)
         at $Proxy165.getAttribute(Unknown Source)
         at com.sapmarkets.bam.application.logdepot.AbstractLogDepot.getAttribute(AbstractLogDepot.java:236)
         at com.sapmarkets.bam.application.logdepot.AbstractLogDepot.getLogDescriptors(AbstractLogDepot.java:84)
         at com.sap.tc.logviewer.mbean.ServerModelLogDepot.getLogDescriptors(ServerModelLogDepot.java:79)
         at com.sap.tc.logviewer.mbean.ServerModelLogDepotGroup$GetLogDescriptorsTask.run(ServerModelLogDepotGroup.java:60)
         at com.sap.tc.logviewer.mbean.ServerModelLogDepotGroup.execute(ServerModelLogDepotGroup.java:173)
         at com.sap.tc.logviewer.mbean.ServerModelLogDepotGroup.getLogDescriptors(ServerModelLogDepotGroup.java:119)
         at com.sap.tc.logviewer.mbean.LogviewerServer.getLogs(LogviewerServer.java:137)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
         at javax.management.StandardMBean.invoke(StandardMBean.java:286)
         at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
         at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
         at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
         at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
         at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
         at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
         at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
         at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:776)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
         at com.sap.tc.logviewer.client.j2ee.J2EELogviewerServerInvoker.invoke(J2EELogviewerServerInvoker.java:111)
         at com.sap.tc.logviewer.client.j2ee.J2EELogviewerServerProxy.getLogs(J2EELogviewerServerProxy.java:105)
         at com.sap.tc.logviewer.client.base.LogviewerClientImpl.getLogs(LogviewerClientImpl.java:114)
         at com.sap.lm.webadmin.logviewer.impl.LV_View.getLogs(LV_View.java:865)
         at com.sap.lm.webadmin.logviewer.impl.LV_View.fetchLogs(LV_View.java:834)
         at com.sap.lm.webadmin.logviewer.impl.LV_View.fetchView(LV_View.java:516)
         at com.sap.lm.webadmin.logviewer.impl.LV_View.fetchView(LV_View.java:496)
         at com.sap.lm.webadmin.logviewer.impl.LV_View.fetchView(LV_View.java:492)
         at com.sap.lm.webadmin.logviewer.impl.LVUI.openView(LVUI.java:609)
         at com.sap.lm.webadmin.logviewer.impl.LVUI.openView(LVUI.java:577)
         at com.sap.lm.webadmin.logviewer.impl.LVUI.openView(LVUI.java:573)
         at com.sap.lm.webadmin.logviewer.LVView.onActionOpenSingleView(LVView.java:1648)
         at com.sap.lm.webadmin.logviewer.wdp.InternalLVView.wdInvokeEventHandler(InternalLVView.java:1560)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Thanks in advance

    Hi,
    have you take a look at SAP Note 701330 ?
    One thread looking like your problem :
    Re: error in opening zip file after Patch 4 HF6 install
    Fabien.

  • System Log Filling Up - Why?

    What is causing this to be written to the System log and how do I stop it?
    10/31/07 4:15:46 PM com.apple.launchd[1] (com.mozy.backup660) ...
    Thanks for any help.

    Yes, I used Mozy very briefly, but I deleted the application (I think) and canceled the Mozy account. What I want to know is how do I stop launchd from trying to launch a backup, failing and logging this message.

  • System logs filling up ALOT of disk space!

    My syslogs are filling up my entire hdd space.
    I checked top and it is constantly running at around 25% CPU.
    These are the 3 offending logs being written:
    everything.log
    kernel.log
    messages.log
    I did a tail -f on all 3 files, and these are repeatedly loop, seems like a kernel issue:  -> tail -f output: http://pastebin.com/m43e12d7e
    Any idea how I can remedy this?
    Thanks!

    apparently this is something to do with cx88, which appears to be a tv tuner driver. don't know why it's logging so verbosely though, looks like interrupt requests or something. anyway i guess one thing to do is make sure you have the right options for the card in /etc/modprobe.d/. I think there are some good v4l wikis out there that explain how to do this

  • Log filling up with kadmind: no such file or directory while initializing

    My log files are being spammed with
    "kadmind; No such file or directory while initializing, aborting"
    followed by edu.mit.kadmind exiting and respawning and then 4x:
    "krb5kdc: cannot initialize realm My-FQDM.NET - see log file for details"
    Not surprisingly, Kerberos logins do not work, for instance from iCal I get:
    "Cannot contact any KDC for requested realm"
    This is a brand new iMac with a brand new install of OS X Leopard, using "Standard" configuration. I'm a complete network admin newb and acknowledge that; I could really use some help getting Kerberos working, and failing that, getting it to stop respawning and spamming the error logs.
    Edit: Sorry, wrong forum, reposted here:
    http://discussions.apple.com/thread.jspa?threadID=1934679&tstart=0
    Message was edited by: Derek Jones3

    Hm, I definitely have a reverse PTR. But there's also definitely a problem with Kerberos. In the Directory, I click Edit for a user and get a GSSAPI Error (cannot find ticket for requested realm) followed by a "if you haven't dismissed the Kerberos authentication dialog by clicking 'Cancel', chances are there is a problem with Kerberos." Interestingly, there's never a dialog presented to me.
    In case it's relevant, as mentioned, this is a new iMac. It will not boot from the OS X Server Install DVD - I have to start out with the client version of OS X and run the installer from the disc, and then reboot sans install DVD. If I try to boot from the DVD it restarts over and over again. Enterprise support said this is "normal" since the install DVD comes with 10.5.4 - it won't boot from a machine that came with 10.5.6 client.
    Is it possible that something that the client version does with Kerberos (standalone machine?) doesn't get corrected in the Server install, preventing it from working? I'm postulizing this theory as I see in my error log shortly after boot:
    com.apple.KerberosAutoConfig[3244] Couldn't find KerberosClient config record

Maybe you are looking for

  • Macbook Pro Early 2010 Bootcamp

    hey i am trying to install windows xp on my mac and it all gose well and works fine untill the part where i am suposed to install drivers so that it all works properly, but i didnt get a osx disc or anyhting with my mac so any idea what i should do p

  • Using Oracle Stored Proc as Data Source for PowerBuilder Data Window Object

    Hi, I'm trying to use an Oracle stored procedure as the data source for a PowerBuilder data window object. I'm using the following (which is a variation of an example given on Sybase's web site, with the appropriate database/column name changes and u

  • Run through t-code

    hi experts, i got requirement, after we create report we assign that to t-code,  when we execute that t-code o/p will come. when we execute report in se38 means it will get a error message that run through particulat t-code. pls any one suggest ....

  • How to set screen resolution in BDC

    hi pls give info regarding how to set resolution for screen thank you Ravi

  • Oracle 8i v8.1.7.1 OCI / Mac OS X

    Hi, I have installed Oracle8i client on Mac OS X as described in the provided readme but i can't find a way to connect to my oracle server. How do i get SQL running? i get a command not found error when typing sqlplus on the prompt and i cannot even