System- logoff with holding the modi?

Hi,
i work in SAP with 5 modi (=sessions). Now i logof with system->logoff. Next day i logon and
i would like to start with the 5 modi (=sessions) which i had before logoff.
Is there any way to handle this?
thanks.
regards, Dieter
Edited by: Thomas Zloch on May 18, 2010 7:54 PM - translation added

I'm curious if anyone from SAP replies, but I don't think it's possible. Logon works like sort of a gateway to the sessions. First you log on, then you can have multiple sessions. If you log off, all the sessions collapse because the "gateway" has to close. The sessions cease to exist after that.
It may be technically feasible to restore the windows that you had open before logoff, but I've never heard anyone asking for the same thing and doubt this feature would be popular. Also, if this was available, it would most likely just open a window with the first screen of the transaction, without any data. And it's not very difficult to start a transaction in SAP, so it wouldn't be very helpful IMHO.

Similar Messages

Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
LN
PS you also need to update your profile - it states that you have OS X 10.6.8

My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

- If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and if iTunes sees the iPod restore via iTunes.
- Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last, make an appointment at the Genius Bar of an Apple store.

System variable for find the method BOR / workflow

Hi,
I am working with one workflow . I am displaying tcode FB60 in edit mode( FV60) for the approver( method FIPP.Change ). I wanted to differentiate technically the tcodes that are executing through manually and thorough BOR method.
Is there any system variable which holds the value of BOR and method name ?
Please help me in getting this system variable.
Regards
paveee

Hi Claudio,
Try this,
->> Open the Pick List(System) PLD and Save as the New PLD.
->> Open the NEw PLD and Create 1 Database Field(for WareHouse Name) in Repetetive Area.
Table -> OWHS - WareHouse
Column -> WhsName - WareHouse Name
Save as and Run the Print Preview.
IF will not print the WareHouse Name in Print.
Do this in PLD.
->> Open your PLD.
--> Ralate to WareHouse Code Field ID in WareHouse Name Field at Content Tab on Properties Window.
Regards,
Madhan.

With holding tax base amount for 1099 vendors with discounted payment term

Hi Friends,
We have a below situation for 1099 vendors,
Some of the 1099 vendors are set-up in the system with payment term with discounts i.e. 2% if paid within 10 days
As per config, system posts with holding tax base amount at the time of posting payment.
With holding tax rate is 0%,
Based on modified net amount calculation
and
Cash discount calculation before w/tax calculation
When we have vendor with input tax, system excludes tax amount at the time of payment but for the with holding tax base calculation amount system does not exclude input tax type.
Which causes difference in 1099 misc vendors
Below is the example of how system calculates the amount.
Invoice $ 1000, payment term 2% if paid within 10 days. Input tax 7.25%
Payment going out=
$1000- $ 72.5(tax 7.25%) = $ 927.5 18.55 [2% discount] = $ 908.95 (payment amount)
With holding base calculation =
$ 1000 100 (2% discount) = $ 900
Difference between payment going out and with holding tax base = 908.98 900 = 8.98
Can some one please tell me how to get rid off this difference?
Moreover, please tell me if its normal to have 1099 vendors with discounted payment term.
Any thoughts on above situation will be helpful
Edited by: Shefford William on Jan 28, 2008 11:36 PM

Dear All
i am also having the same problem. The example is
Net invoice Value   = $ 100,000
Input Tax @ 15%   = $ 15,000
Total Invoice Value = $ 115,000
Cash Discount = 20% with in 20 days
On payment the system behavior should be
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,325 ( 3.5% of 95,000 the Inv Value - Cash Discount that is $ 115,000 - $20,000)
Credit Bank Account = $ 91,675 ( Inv value - Cash Dic - W/H tax that is $ 115,000 - 20,000 - 3325 = 91,675)
However at the time of payment system is calculating tax as follows
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,220 ( 3.5% of 92,000 the Inv Value - Cash Discount that is $ 115,000 - $23,000. This $ 23,000 is only calculated for W/H tax calculation that is 20% of $ 115,000 )
Credit Bank Account = $ 91,780 ( Inv value - Cash Dis - W/H tax that is $ 115,000 - 20,000 - 3220 = 91,780)
this is not the common practice when using the net base value in the system.
Can any one help me in this regard. I really have been stucked in this problem for many days
Regards
Bilal Athar

My iphone won't switch on. I've tried holding the power and home button more than 30 seconds up to a few minutes but it didn't switch on and went straight to recovery mode. It died of a low battery and i already fully charged it i checked with my itunes.

i really need help here. I have only used my iphone for a month. my iphone won't switch on. it died of a low battery and i've already fully charged it and usually before it even fully charged, it will turn back on right but in my case nothing happened. i've tried holding the power and home button for 30 seconds and up to 2-3 minutes but no logo appear. it went straight to recovery mode. there's nothing wrong with my cable, i checked with itunes and this happened once a week ago but it did switch back on after i tried a few times but now it just won't switch on. i also have problems with my screen as there's some noises to the screen (i hope you get me) and when i turned the camera on, it was as if the whole screen is shaking. i'm currently studying in the middle east and there's no apple store here so i cannot use my warranty. i will only be back home in summer. please help me what should i do to at least switch my iphone on first.

I did a little bit of experimenting. I have an iPad original versions myself. I took it out of the box knowing that I haven used it in months and I expected the battery to be dead and sure enough the battery was as dead as I imagined it would be. For the first 30 minutes I experienced exactly what you are experiencing, but then the iPad suddenly powered up on its own (like it does when plugged into the charger) and I am using it now to type this response to you.
My point is that I am starting tothink that your battery has suddenly died on you for some reason or you have a hardware problem now. I would still try leaving the iPad charge for a while longer - maybe even overnight - and then try again in the morning. Unplug the iPad and try resetting with the home and sleep buttons. Try plugging the iPad in again. Unplug it, try restarting again. Let it charge for a while again.
After trying something like that, if it still will not start up, then I think it's time for a trip to an Apple Store and see what the Apple Techs think.

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in
and will then boot up again without any errors.
I Have replace RAMS, Motherboard and Power Supply. I have check the Bio's and Power setting on the unit. there is no place to cause this issue.
Please help
PC Power Tech

Syamak,
You didn’t specify where the beeping noise is coming from.
If it’s coming through your speakers, you could try to update your audio drivers since it’s possible they’re incorrectly sending a signal to the speakers as the audio chipset enters standby.
If the noise is coming from the motherboard, you’ll need to take a closer look at your system’s configuration or contact the manufacturer.
I hope this helps.
Mike
Windows Outreach Team – IT Pro

I updated the system on my I pad yesterday. Now I can not start my I pad. The screen is black, if I hold the button on the right side, first the Apple logo starts, than immediately the I-tunes Logo with a "Plug" sign comes up. That stays on for ever. What

I updated my I pad yesterday with the ISO 7.04 . Now it just has a black screen. When I hold the button on the right hand down for 10 seconds, I first very briefly get the Apple Logo, than immediately the I-Tunes sign with a plug sign. I cannot get anything else working. I did not have I-tunes on my i-pad since the file is large, but have it on my MAC . So how can I get my I-pad working again????

This solved all my problems. It took a while, about 87 minutes for the complete "restore to factory setting" and after that about 30 minutes to put all my contacts etc. back on.
It did'nt matter how long it took, I have my I-Pad back and that is great.
I really do appreciate your help. Thank you so much.

After a few minutes on safari it freezes everything i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

With holding tax amount exceeds the cutomer/vendor line item amount 001

Hi Guru's,
I have an issue, is there any impact to change the withholding tax base amount 20% instead of 10%.When I change the base amount to 20% and post a document system return error message
"With holding tax amount exceeds the cutomer/vendor line item amount 001".Guide me on this issue.
And tell me the impact of previous open item documents.
Regards
Maruthi.

Thanks for all,
MY problem solved.
Regards
Maruthi

I too had the same vertical white line in the centre of the screen last night after having my iPhone 5 up and running for 10 days. I managed to turn it off by holding the buttons in and it came up with the iTunes screen....2 hours later it came good?

I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge

I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!

- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore

I have a camcorder that records in the .MOD format. It is a Panasonic SDR-S26 and is not compatible with MAC. I want to create a DVD using the video on my camcorder. How can I do this?

My operating system is OS X (version 10.6.8) and I have a Mac Mini.

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

System- logoff with holding the modi?

Similar Messages

Maybe you are looking for