System::Management::Automation not recognized in cpp code
I need to call powershell cmdlets from cpp code. The cmdlets which will operate the vm's from the hyper-v.
I found that to run the powershell cmdlets, will have to create powershell object and then could invoke the scripts I need to.
But code fails at the line..
using namespace System::Management::Automation;
I am using a makefile to build my project.
What libs, and dll's I need to add so the project will be able to recognize this namespace.
Hi PuneDev,
Sorry for the delay.
If you want to load .dll file in powershell, please refer to the script below:
[Reflection.Assembly]::LoadFile(“c:\temp\MyMathLib.dll”)
Reference from:
Run my third party dll with powershell
Best Regards,
Anna
Similar Messages
-
System.Management.Automation.ExitException not trapped
If I ran the following code and click the Exit-Button, I get a
System.Management.Automation.ExitException.
$ErrorActionPreference = 'Stop'
Add-Type -AssemblyName 'System.Windows.Forms'
$Form = New-Object Windows.Forms.Form
$Form.Add_Shown({
$Form.Activate()
$Button_Exit = New-Object System.Windows.Forms.Button
$Button_Exit.Text = 'Exit'
$Form.Controls.Add($Button_Exit)
$Button_Exit.Add_Click({
Trap {
Write-Host 'trapped'
Exit
$Form.ShowDialog()
I found, I can prevent the exception if I use [System.Environment]::Exit(0)
instead of Exit.
My Question is: Why is System.Management.Automation.ExitException
not trapped?
The Trap does work with other exceptions.Are you trying to only exit the form or are you trying to exit the PowerShell console/ISE? Based on the error that is happening, you won't be able to catch it under PowerShell as it seems to be happening outside of it (yes the error happens because of
what you are doing in PowerShell, but it is outside of PowerShell's control). I would stick with your workaround to deal with the exit button event.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book -
Hi,
I'm running TFS2013.4 with a number of build servers and all working fine.
I'm also running Release Management with update 4 (12.0.31101.0) and am running into trouble when trying to run my first dummy release.
I have setup my servers, stages, releases paths, components and release template (all vNext) with out issue.
When I run my Release Template (Deploy Using PS/DSC) I'm getting the following error :-
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AggregateException: One or more errors occurred. ---> System.IO.FileNotFoundException:
Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies.
The system cannot find the file specified.
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.PowershellExecutor.DisposeCurrentSession()
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.RemoteDeploymentHelper.Dispose()
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.DeploymentClient.<RunAsync>d__11.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.DeploymentClient.<RunPowerShellAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.TeamFoundation.Release.EnvironmentProvider.OnPrem.Implementation.OnPremDeploymentProvider.<CopyBuildsLocally>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.TeamFoundation.Release.EnvironmentProvider.OnPrem.Implementation.OnPremDeploymentProvider.<RunScript>d__0.MoveNext()
--- End of inner exception stack trace ---
at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Release.MonitorServices.Dsc.OnPrem.OnPremDeploymentActions.InvokePlatform(String activityId, MachineSpecification machineSpecification, StorageSpecification storageSpecification, String scriptPath, String configurationPath,
Dictionary`2 configurationVariables)
at Microsoft.TeamFoundation.Release.MonitorServices.Dsc.OnPrem.OnPremDeploymentActions.RunScript(DscComponent dscComponentParameters, String serverName, String userName, String password, String componentName, String scriptPath, String configurationPath,
String useCredSecuritySupportProvider, String useHttps, String skipCACheck)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.Dsc.DscComponentInstaller.InvokeMethodByReflection(String methodArguments)
I can't work out if my target machine (2008 R2 SP1) has a problem with WMA 3.0 or if the Release Template can't find the powershell script that I'm trying to call. I figured that the relative path to the script could be wrong and have tried numerous
iterations to no effect. The error clearly points to a problem with WMA right?
The target machine has .Net Framework 4.0, WMA Framework 3.0 and I can run Enter-PSSession to remote to it etc...
Before I trash and rebuild my target machine I hoping someone may have some insight to my problem?
Thanks in Advance
Jason
shroomieDaniel,
The PS Script is taken from an MSDN blog and is fairly standard. I'm sure it will run fine when executed, but I've not run it as it requires environment variables ($applicationPath) that will be present in the Release Management session calling it.
Here's the script :-
configuration InstallModules
param
# Target nodes to apply the configuration
[string[]]$NodeName = 'localhost',
# Source Path for Modules
[String]$SourcePath = "$applicationPath\Deploy\Modules",
# Destination path for Modules
[String]$DestinationPath = "$env:ProgramFiles\WindowsPowershell\Modules"
Node $NodeName
# Copy the Modules
File ModuleContent
Ensure = "Present"
SourcePath = $SourcePath
DestinationPath = $DestinationPath
Recurse = $true
Type = "Directory"
InstallModules
Thanks
Jason
shroomie -
Greetings.
I'm getting 2 errors and 1 warning in the Hybrid Configuration object:
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=Tenant Cmdlet=Get-FederationInformation FINISH Time=2620.7003ms
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig START
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig FINISH Time=203.229ms
WARNING : Office 365 was unable to communicate with your on-premises Autodiscover endpoint. This is typically due to incorrect DNS or firewall configuration. The Office 365 tenant is currently configured to use the following URL for Autodiscover
queries from the Office 365 tenant to the on-premises organization - https://autodiscover.SanJuanCiudadPatria.com/autodiscover/autodiscover.svc/WSSecurity. See the following article for further information: http://go.microsoft.com/fwlink/p/?LinkId=275838
Any help would be greatly appreciated.
Hello World.Hello,
If the IIS configuration is missing the svc-Integrated handler mapping, the issue may occur. Please try to refer to the following KB to check if the issue can be solved.
http://support.microsoft.com/kb/2626696
Please check if there is A record for autodiscover on public DNS server or DNS SRV record.
Additional blog for your reference.
http://blogs.technet.com/b/mikehall/archive/2013/08/21/office-365-insight-into-the-hybrid-configuration-wizard-part-2.aspx
Cara Chen
TechNet Community Support -
I am using c# wmi calls to connect to connect to ISCSI LUN through ISCSI initiator. I am using windows server 2012 r2. From server manager I am able to connect through ISCSI initiator. From GUI every thing is working fine. I am able to list ISCSISessions
through ISCSISession.GetInstances() in c# code. WmiExplorer is also showing that connect method is there. Generated class contains the connect() method.
System.Management.ManagementException was unhandled by user code
HResult=-2146233087
Message=Not found
Source=System.Management
StackTrace:
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementObject.get_ClassPath()
at System.Management.ManagementObject.GetMethodParameters(String methodName, ManagementBaseObject& inParameters, IWbemClassObjectFreeThreaded& inParametersClass, IWbemClassObjectFreeThreaded& outParametersClass)
at System.Management.ManagementObject.GetMethodParameters(String methodName)
at ROOT.MICROSOFT.WINDOWS.STORAGE.ISCSITarget.Connect(String AuthenticationType, String ChapSecret, String ChapUsername, String InitiatorInstanceName, String InitiatorPortalAddress, Boolean IsDataDigest, Boolean IsHeaderDigest,
Boolean IsMultipathEnabled, Boolean IsPersistent, String NodeAddress, Boolean ReportToPnP, String TargetPortalAddress, UInt16 TargetPortalPortNumber, ManagementBaseObject& CreatediSCSISession) at ROOT.Microsoft.Windows.Storage.MSFT_iSCSITarget.cs:line
402Hi,
The issue is related to C# language, I suggest you ask for help from MSDN forum for better and accurate answer to the question.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I am getting an error System.Management.Automation.MethodInvocationException: Exception calling "ExecuteQuery" with "0" argument(s): "$Resources:core,ImportErrorMessage;" ---> Microsoft.SharePoint.Client. ServerException:
$Resources:core,ImportErrorMessage;
Following is my powershell script on line
$context.ExecuteQuery(); it is throwing this error.
function AddWebPartToPage([string]$siteUrl,[string]$pageRelativeUrl,[string]$localWebpartPath,[string]$ZoneName,[int]$ZoneIndex)
try
#this reference is required here
$clientContext= [Microsoft.SharePoint.Client.ClientContext,Microsoft.SharePoint.Client, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]
$context=New-Object Microsoft.SharePoint.Client.ClientContext($siteUrl)
write-host "Reading file " $pageRelativeUrl
$oFile = $context.Web.GetFileByServerRelativeUrl($pageRelativeUrl);
$limitedWebPartManager = $oFile.GetLimitedWebPartManager([Microsoft.Sharepoint.Client.WebParts.PersonalizationScope]::Shared);
write-host "getting xml reader from file"
$xtr = New-Object System.Xml.XmlTextReader($localWebpartPath)
[void] [Reflection.Assembly]::LoadWithPartialName("System.Text")
$sb = new-object System.Text.StringBuilder
while ($xtr.Read())
$tmpObj = $sb.AppendLine($xtr.ReadOuterXml());
$newXml = $sb.ToString()
if ($xtr -ne $null)
$xtr.Close()
#Add Web Part to catalogs folder
write-host "Adding Webpart....."
$oWebPartDefinition = $limitedWebPartManager.ImportWebPart($newXml);
$limitedWebPartManager.AddWebPart($oWebPartDefinition.WebPart, $ZoneName, $ZoneIndex);
$context.ExecuteQuery();
write-host "Adding Web Part Done"
catch
write-host "Error while 'AddWebPartToPage'" $_.exception| format-list * -force
ERROR:
Error while 'AddWebPartToPage' System.Management.Automation.MethodInvocationException: Exception calling "ExecuteQuery" with "0" argument(s): "$Resources:core,ImportErrorMessage;" ---> Microsoft.SharePoint.Client.
ServerException: $Resources:core,ImportErrorMessage;
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
at ExecuteQuery(Object , Object[] )
at System.Management.Automation.DotNetAdapter.AuxiliaryMethodInvoke(Object target, Object[] arguments, MethodInformation methodInformation, Object[] originalArguments)
--- End of inner exception stack trace ---
at System.Management.Automation.DotNetAdapter.AuxiliaryMethodInvoke(Object target, Object[] arguments, MethodInformation methodInformation, Object[] originalArguments)
at System.Management.Automation.DotNetAdapter.MethodInvokeDotNet(String methodName, Object target, MethodInformation[] methodInformation, Object[] arguments)
at System.Management.Automation.Adapter.BaseMethodInvoke(PSMethod method, Object[] arguments)
at System.Management.Automation.ParserOps.CallMethod(Token token, Object target, String methodName, Object[] paramArray, Boolean callStatic, Object valueToSet)
at System.Management.Automation.MethodCallNode.InvokeMethod(Object target, Object[] arguments, Object value)
at System.Management.Automation.MethodCallNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
Thanks Sethu for your comments. However i am running this powershell directly on server so believe
SharePointOnlineCredentials is not required.
I have tried it but still giving me same error -
Hi,
I am trying to stop a windows service on a remote computer using System.Management.Automation.Runspaces.Pipeline.Invoke() method.
To do this I create a string containing the powershell command ("Get-Service -ComputerName machineName -Name serviceName | Stop-Service") and add it as a parameter to
pipeline.Commands.AddScript
However, the service fails to stop.
Any thooughts ??Are you running this under the PowerShell console or ISE? Or is this something you are working on in Visual Studio to build some other tool that utilizes PowerShell? If through Visual Studio would be great to see all of your code to
better help you out, otherwise if you are trying to do something through the ISE/Console you should really look at what everyone else has already said.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book -
ITunes keep sayin the code you entered is not recognized as vaild code
hi >> i just bought itunes gift card and when i came to reddem it to my account its keep saying ((
the code you entered is not recognized as vaild code)) so can some one help meHelp here > iTunes Store: Invalid, inactive, or illegible codes
-
Some folders on System Manager are not displayed correctly
Hi,
I'm using a Rockwell CLP of family ControlLogix, this CLP communicates with NI OPC Servers. I have created a Process and an IO Server on System Manager
My problem is: when I browse for TAGs on System manager, some items, who must be folders, are displayed as integers.
Same problem occurs when I use PSP Network browser, example tool.
Bruno B. Costa
Automation Engineer
Attachments:
bug.png 45 KBYes these fonts have one feature - see http://developer.java.sun.com/developer/bugParade/bugs/4279855.html
so you can check them by next way :
GraphicsEnvironment ge = GraphicsEnvironment.
getLocalGraphicsEnvironment();
Font[] fonts = null;
if (ge != null) {
fonts = ge.getAllFonts();
for (int i=0; i < fonts.length; i++) {
fonts.canDisplay('a'); -
Netapp System Manager - Exports not displaying
Hi All, I am completely new to the Netapp world. It was dropped on me yesterday to create and NFS export. No big deal it seemed easy enough. Was having some issues with the security permissions for a Linux host and when I was working on that I lost the display of my exports in Netapp System Manager. I see exports when I run exportfs1> exportfs/vol/gs_01 -sec=sys,rw,nosuid/vol/egene -sec=sys,rw,nosuid/vol/vol0/home -sec=sys,rw,nosuid/vol/lab_data/ABC\ SOPs -sec=sys,ro/vol/lab_data -sec=sys,rw,nosuid/vol/archive -sec=sys,rw,nosuid/vol/vol0 -sec=sys,rw,anon=0,nosuid/vol/custom_genetics -sec=sys,rw,nosuid/vol/archive_3730 -sec=sys,rw,nosuidBut the GUI shows nothing...Has anyone else ever seen something like this? It allows me to go a head and create an export through system manager but nothing new shows up in the GUI or cli.
HiI have the same problem.I am using System Manager 3.1 and OnTAP 8.2.1.In the cli it shows me the export.rdfile /etc/exportsBut I can mount it to my VMware Hosts. I get the following error message:Call "HostDatastoreSystem.CreateNasDatastore" for
object "ha-datastoresystem" on ESXi "HOST IP" failed.NFS mount IPADDRESS:/vol/vol_nfs_ds01/q_nfs_ds01 failed: The
NFS server does not support MOUNT version 3 over TCP. An unknown error has occurred.RegardsMartin -
View Object is invalid due to SYSTEM.MODE is not recognized inside SQL
Hi All,
I tried recreating a Oracle form 9i to ADF BC using Jheadstart 10.1.3.3.81, JHS converted the form(converted .xml) generating the Entity and View Objects.
But among the generated View Objects few are invalid due to which the generated .jspx page is partial in result compared to Original form.
I have pasted the SQL generated from one of the View Object which is invalid. I tried fixing this SQL from SQL Navigator but I get Invalid function error for SYSTEM.MODE and Not an Object or REF for :INSHST.FACILITY_ID. Can anyone help me out in fixing this Issue?
SELECT VSLHST.LAST_UPDATE_LOGIN,
VSLHST.LAST_UPDATE_DATE,
VSLHST.LAST_UPDATED_BY,
VSLHST.CREATION_DATE,
VSLHST.CREATED_BY,
VSLHST.POST_VOLUME,
VSLHST.POST_LEVEL_PERCENT,
VSLHST.POST_TEMPERATURE,
VSLHST.POST_GAS_PRESSURE,
VSLHST.POST_LEVEL,
VSLHST.EQUIPMENT_ID,
VSLHST.EQUIPMENT_INSTALLATION_ID,
VSLHST.EQUIPMENT_FACILITY_ID,
VSLHST.INSTALLATION_HISTORY_ID,
VSLHST.INSTALLATION_ID,
VSLHST.FACILITY_ID,
VSLHST.VESSEL_HISTORY_ID,
(select DSP_DI_WATER_VOLUME
from (SELECT EQU.EQUIPMENT_CODE L_EQUIPMENT_CODE,
EQU.DESCRIPTION DSP_DESCRIPTION,
EQ.FACILITY_ID L_FACILITY_ID,
EQ.INSTALLATION_ID L_INSTALLATION_ID,
EQ.EQUIPMENT_ID L_EQUIPMENT_ID,
EQ.DI_VESSEL_NUMBER DSP_DI_VESSEL_NUMBER,
EQ.EQUIPMENT_CODE DSP_EQUIPMENT_CODE,
EQ.DI_FULL_LEVEL DSP_DI_FULL_LEVEL,
EQ.CAPACITY_QUANTITY DSP_CAPACITY_QUANTITY,
EQ.UNIT_OF_MEASURE DSP_UNIT_OF_MEASURE,
EQ.DI_WATER_VOLUME DSP_DI_WATER_VOLUME
FROM CP_EQUIPMENTS EQ, CP_X_EQUIPMENT_TYPES EQU
WHERE (((:SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_QWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_QWC_END VSLHST.EQ */
)) OR ((NOT :SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_VWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_VWC_END VSLHST.EQ */
AND EQ.EQUIPMENT_CODE = EQU.EQUIPMENT_CODE
ORDER BY L_EQUIPMENT_CODE) LOVQUERY
where 1 = 1
and LOVQUERY.L_FACILITY_ID = VSLHST.EQUIPMENT_FACILITY_ID
and LOVQUERY.L_INSTALLATION_ID = VSLHST.EQUIPMENT_INSTALLATION_ID
and LOVQUERY.L_EQUIPMENT_ID = VSLHST.EQUIPMENT_ID) AS DSP_DI_WATER_VOLUME,
(select DSP_UNIT_OF_MEASURE
from (SELECT EQU.EQUIPMENT_CODE L_EQUIPMENT_CODE,
EQU.DESCRIPTION DSP_DESCRIPTION,
EQ.FACILITY_ID L_FACILITY_ID,
EQ.INSTALLATION_ID L_INSTALLATION_ID,
EQ.EQUIPMENT_ID L_EQUIPMENT_ID,
EQ.DI_VESSEL_NUMBER DSP_DI_VESSEL_NUMBER,
EQ.EQUIPMENT_CODE DSP_EQUIPMENT_CODE,
EQ.DI_FULL_LEVEL DSP_DI_FULL_LEVEL,
EQ.CAPACITY_QUANTITY DSP_CAPACITY_QUANTITY,
EQ.UNIT_OF_MEASURE DSP_UNIT_OF_MEASURE,
EQ.DI_WATER_VOLUME DSP_DI_WATER_VOLUME
FROM CP_EQUIPMENTS EQ, CP_X_EQUIPMENT_TYPES EQU
WHERE (((:SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_QWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_QWC_END VSLHST.EQ */
)) OR ((NOT :SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_VWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_VWC_END VSLHST.EQ */
AND EQ.EQUIPMENT_CODE = EQU.EQUIPMENT_CODE
ORDER BY L_EQUIPMENT_CODE) LOVQUERY
where 1 = 1
and LOVQUERY.L_FACILITY_ID = VSLHST.EQUIPMENT_FACILITY_ID
and LOVQUERY.L_INSTALLATION_ID = VSLHST.EQUIPMENT_INSTALLATION_ID
and LOVQUERY.L_EQUIPMENT_ID = VSLHST.EQUIPMENT_ID) AS DSP_UNIT_OF_MEASURE,
(select DSP_CAPACITY_QUANTITY
from (SELECT EQU.EQUIPMENT_CODE L_EQUIPMENT_CODE,
EQU.DESCRIPTION DSP_DESCRIPTION,
EQ.FACILITY_ID L_FACILITY_ID,
EQ.INSTALLATION_ID L_INSTALLATION_ID,
EQ.EQUIPMENT_ID L_EQUIPMENT_ID,
EQ.DI_VESSEL_NUMBER DSP_DI_VESSEL_NUMBER,
EQ.EQUIPMENT_CODE DSP_EQUIPMENT_CODE,
EQ.DI_FULL_LEVEL DSP_DI_FULL_LEVEL,
EQ.CAPACITY_QUANTITY DSP_CAPACITY_QUANTITY,
EQ.UNIT_OF_MEASURE DSP_UNIT_OF_MEASURE,
EQ.DI_WATER_VOLUME DSP_DI_WATER_VOLUME
FROM CP_EQUIPMENTS EQ, CP_X_EQUIPMENT_TYPES EQU
WHERE (((:SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_QWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_QWC_END VSLHST.EQ */
)) OR ((NOT :SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_VWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_VWC_END VSLHST.EQ */
AND EQ.EQUIPMENT_CODE = EQU.EQUIPMENT_CODE
ORDER BY L_EQUIPMENT_CODE) LOVQUERY
where 1 = 1
and LOVQUERY.L_FACILITY_ID = VSLHST.EQUIPMENT_FACILITY_ID
and LOVQUERY.L_INSTALLATION_ID = VSLHST.EQUIPMENT_INSTALLATION_ID
and LOVQUERY.L_EQUIPMENT_ID = VSLHST.EQUIPMENT_ID) AS DSP_CAPACITY_QUANTITY,
(select DSP_DI_FULL_LEVEL
from (SELECT EQU.EQUIPMENT_CODE L_EQUIPMENT_CODE,
EQU.DESCRIPTION DSP_DESCRIPTION,
EQ.FACILITY_ID L_FACILITY_ID,
EQ.INSTALLATION_ID L_INSTALLATION_ID,
EQ.EQUIPMENT_ID L_EQUIPMENT_ID,
EQ.DI_VESSEL_NUMBER DSP_DI_VESSEL_NUMBER,
EQ.EQUIPMENT_CODE DSP_EQUIPMENT_CODE,
EQ.DI_FULL_LEVEL DSP_DI_FULL_LEVEL,
EQ.CAPACITY_QUANTITY DSP_CAPACITY_QUANTITY,
EQ.UNIT_OF_MEASURE DSP_UNIT_OF_MEASURE,
EQ.DI_WATER_VOLUME DSP_DI_WATER_VOLUME
FROM CP_EQUIPMENTS EQ, CP_X_EQUIPMENT_TYPES EQU
WHERE (((:SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_QWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_QWC_END VSLHST.EQ */
)) OR ((NOT :SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_VWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_VWC_END VSLHST.EQ */
AND EQ.EQUIPMENT_CODE = EQU.EQUIPMENT_CODE
ORDER BY L_EQUIPMENT_CODE) LOVQUERY
where 1 = 1
and LOVQUERY.L_FACILITY_ID = VSLHST.EQUIPMENT_FACILITY_ID
and LOVQUERY.L_INSTALLATION_ID = VSLHST.EQUIPMENT_INSTALLATION_ID
and LOVQUERY.L_EQUIPMENT_ID = VSLHST.EQUIPMENT_ID) AS DSP_DI_FULL_LEVEL,
(select DSP_DESCRIPTION
from (SELECT EQU.EQUIPMENT_CODE L_EQUIPMENT_CODE,
EQU.DESCRIPTION DSP_DESCRIPTION,
EQ.FACILITY_ID L_FACILITY_ID,
EQ.INSTALLATION_ID L_INSTALLATION_ID,
EQ.EQUIPMENT_ID L_EQUIPMENT_ID,
EQ.DI_VESSEL_NUMBER DSP_DI_VESSEL_NUMBER,
EQ.EQUIPMENT_CODE DSP_EQUIPMENT_CODE,
EQ.DI_FULL_LEVEL DSP_DI_FULL_LEVEL,
EQ.CAPACITY_QUANTITY DSP_CAPACITY_QUANTITY,
EQ.UNIT_OF_MEASURE DSP_UNIT_OF_MEASURE,
EQ.DI_WATER_VOLUME DSP_DI_WATER_VOLUME
FROM CP_EQUIPMENTS EQ, CP_X_EQUIPMENT_TYPES EQU
WHERE (((:SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_QWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_QWC_END VSLHST.EQ */
)) OR ((NOT :SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_VWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_VWC_END VSLHST.EQ */
AND EQ.EQUIPMENT_CODE = EQU.EQUIPMENT_CODE
ORDER BY L_EQUIPMENT_CODE) LOVQUERY
where 1 = 1
and LOVQUERY.L_FACILITY_ID = VSLHST.EQUIPMENT_FACILITY_ID
and LOVQUERY.L_INSTALLATION_ID = VSLHST.EQUIPMENT_INSTALLATION_ID
and LOVQUERY.L_EQUIPMENT_ID = VSLHST.EQUIPMENT_ID) AS DSP_DESCRIPTION,
(select DSP_DI_VESSEL_NUMBER
from (SELECT EQU.EQUIPMENT_CODE L_EQUIPMENT_CODE,
EQU.DESCRIPTION DSP_DESCRIPTION,
EQ.FACILITY_ID L_FACILITY_ID,
EQ.INSTALLATION_ID L_INSTALLATION_ID,
EQ.EQUIPMENT_ID L_EQUIPMENT_ID,
EQ.DI_VESSEL_NUMBER DSP_DI_VESSEL_NUMBER,
EQ.EQUIPMENT_CODE DSP_EQUIPMENT_CODE,
EQ.DI_FULL_LEVEL DSP_DI_FULL_LEVEL,
EQ.CAPACITY_QUANTITY DSP_CAPACITY_QUANTITY,
EQ.UNIT_OF_MEASURE DSP_UNIT_OF_MEASURE,
EQ.DI_WATER_VOLUME DSP_DI_WATER_VOLUME
FROM CP_EQUIPMENTS EQ, CP_X_EQUIPMENT_TYPES EQU
WHERE (((:SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_QWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_QWC_END VSLHST.EQ */
)) OR ((NOT :SYSTEM.MODE = 'ENTER-QUERY') AND
( /* CG$MDTU_VWC_START VSLHST.EQ */
(EQ.facility_id = :INSHST.FACILITY_ID and
EQ.installation_id = :INSHST.INSTALLATION_ID and
(EQ.installed_date <= sysdate and
(EQ.removal_date is null or
EQ.removal_date >= sysdate) and
(EQ.stop_fill_date is null or
EQ.stop_fill_date >= sysdate))) /* CG$MDTU_VWC_END VSLHST.EQ */
AND EQ.EQUIPMENT_CODE = EQU.EQUIPMENT_CODE
ORDER BY L_EQUIPMENT_CODE) LOVQUERY
where 1 = 1
and LOVQUERY.L_FACILITY_ID = VSLHST.EQUIPMENT_FACILITY_ID
and LOVQUERY.L_INSTALLATION_ID = VSLHST.EQUIPMENT_INSTALLATION_ID
and LOVQUERY.L_EQUIPMENT_ID = VSLHST.EQUIPMENT_ID) AS DSP_DI_VESSEL_NUMBER
FROM DI_VESSEL_HISTORIES VSLHST
WHERE exists
(select 1
from CP_EQUIPMENTS EQ
where (VSLHST.EQUIPMENT_FACILITY_ID = EQ.FACILITY_ID)
and (VSLHST.EQUIPMENT_ID = EQ.EQUIPMENT_ID)
and (VSLHST.EQUIPMENT_INSTALLATION_ID = EQ.INSTALLATION_ID)
and EQ.FACILITY_ID = :b_INSHST_FACILITY_ID
and EQ.INSTALLATION_ID = :b_INSHST_INSTALLATION_ID
and (EQ.INSTALLED_DATE <= sysdate and
(EQ.REMOVAL_DATE is null or EQ.REMOVAL_DATE >= sysdate) and
(EQ.STOP_FILL_DATE is null or EQ.STOP_FILL_DATE >= sysdate)))
Thanks In Advance,
--MunirajMuniraj,
System.mode is forms specific, the Forms2ADFGenerator should convert this part of the SQL statement and put it between brackets.
For references to block.item, it creates bind variables. Apparently, that did not happen. Can you send the <form_name>_
extracted.xml file that is located in the root Java source direvtory of the model project to [email protected]?
Thanks,
Steven Davelaar,
JHeadstart Team. -
Device Manager is not recognizing my robotic library
Win2k8 R2 server operating system with Adaptec 29320LPE SCSI adapter in a PCIe slot. Attached to Adaptec is a Quantum Superloader 3 robotic tape library. LUNS support is enabled in the Adapted BIOS. During POST Adaptec card shows two devices found: Quantum
DLT4 and the LUN1 tape library.
Device Manager only recognizes a single Tape Device: Quantum DLT 4. No "Medium Changer" device or "Robotic Library" device shows in Device Manager.
The Quantum Superloader works fine with my older Win2k3 Server. That server is using a PCI 64bit Adaptec card for the Superloader 3.
I could use some assistance on how to resolve this issue.Hi,
As for this issue, you should check with the hardware vendor for the appropriate documentation for the device
and verify with hardware vendor whether it is compatible with windows server2008R2.
If it’s compatible with windows server2008R2, you should have appropriate driver software.
Best Regards,
Jeff Ren
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Operating system (windows 7) not recognized by Dreamweaver
Dear all,
I wanted to download Dreamweaver from the Adobe website. My computer runs on Windows 7, which is listed as an acceptable operating system on the same webpage. However, when I click 'download', I get an error saying that my operating system is not compatible with dreamweaver. I had this problem using both Iron and Firefox as a browser. Does anyone recognize this problem and/or know the solution?
Thanks in advance!Hi Saveedrow,
Could you please download CC desktop from the link: https://creative.adobe.com/products/creative-cloud, sign in with your Adobe Id and try to download/Install Dreamweaver. If still the same error then try to downloading from the direct link: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Please follow the very important instruction before download.
Regards,
Romit Sinha -
Connecting to home theatre system but is not recognized
trying to connect to sony home theater system but says its not supported. It states that ipod classic is supported. Is there a way to update my older ipod?
Connect the audio output from your Mac to a line in jack on the home stereo.
OR...
Get an AirPort Extpress.
OR...
Get an Apple TV. -
Labview 2011: Distributed System Manager does not load variables in process
Hi everyone,
I'm having problems with the DSM of Labview 2011.
My application consists of a main VI.
There will be loaded a sub VI in this main VI, which subVI will be loaded depends on the button that is pressed.
The problem that I have is the following(the problem comes up on a Windows 7 system, on Windows XP system everything works well):
- When I open a subVI, it will be opened in mij DSM, but it takes a while before it is visible, not immediately but after a while.
- Normally, when I open the process(in the DSM) of the subVI, the variables that are present in the subVI, should be visible.
- In this case, non of the variables is visible.
Is it possible that there is something wrong with the DSM?
Or do I have to make some changes to my settings on the computer?
The firewall is off and the DCOM settings are ok.
I hope someone can help me.
With kind regards,
CheeseI observed a similar behaviour in case I changed my configuration during development: the variables were not changed accordingly, from time to time.
The most effective corrective actions was to manually stop and restart the NI Variable Engine service.
Surprisingly, restarting the PC was uneffective.
Paolo
LV 7.0, 7.1, 8.0.1, 2011
Maybe you are looking for
-
My phone was stolen but I am pretty sure it was recently 'backed up' to the cloud when I updated the software how can I find out ?
-
IPhone 5 won't start up, shows that it's charging but won't turn on.
I've had my iPhone 5 for a year and a half now and recently the battery has been having issues. Last night my phone reached 19% and turned off as if it had no charge left at all, and when I tried to plug the phone in to charge, the battery symbol sho
-
Hi, Can anyone please tell me on TCODE VA03 where can we see "Rejection Status VBGA-ABSTA". Or if not on VA03, where can we see that field. I am working on a report in BI and customer wants to see that on the report. Thanks
-
We have a specific document we need printing with a lot of graphics, however when printing to our HP Laserjet 400 printer - it brings up PCL XL errors like IllegalFontData, I think the PDF was created in InDesign.
-
Problems after installing ios 6
I recently downloaded and installed IOS 6. There are several issues as follows: a) Adjustments is frozen. I got here in order to synchonize my Facebook ID and it is now frozen. b) Apps are not being updated. I have now 8 Apps that are supposedly bein