System Maxing Out!

Hey there! I followed up on some performace tips for my mac, but its not enough. I followed pretty much everything in the manual and even doing things from cliff truesdell's book, but its still not quite enough for me. My music requires lots of information processing and MIDI functions, which maxes out my processor in a heartbeat. My questions: are there any other things that I can do to help the music get processed, and I hear something about logic node...what is it?

Logic node is a utility that allows you to connect two macs together so that the Mac running logic can source processing power from the other mac.....
you need the same version of logic node on both macs and connect them via ethernet.
also if you only have one monitor, make sure the slave mac has logic node as a startup item.
after all that, it can sometimes not work too well

Similar Messages

After upgrading to 10.5.4, CPU keeps maxing out and system runs slower

Hi there,
I upgraded to 10.5.4 last week and quite frequently my CPU starts revving up and stays at a high level until I put my iMac to sleep. When I did my weekly reboot last Friday it seemed to not have the problem for a while, but then it came back again pretty quick. By checking Activity Monitor I found out that my resources are maxed out all the time, I've got about 80% CPU attached to Safari right now. Applications seem to load slower, everything runs a bit slower when it's like this.
I found under System Preferences > Energy Saver that I had my Processor Performance set to Highest, so I switched that to Automatic, but I'm still having this problem.
Can anyone help me with this?
Travis

Thank you, Pondini, that's all I was really asking about in the 3 (4) previous messages. I wanted to know if I could download the combo updater and install it over top of the 10.5.4 version I downloaded through Software Update. Thanks for the confirmation. I did download it this morning after getting your post and have installed it.
Initially, after installation and reboot of the combo update 10.5.4, my CPU maxed out again for a little while, and I checked Activity Monitor and it said a program called "Pattern ?" was hogging the CPU, the ? refers to a second word that I didn't write down at the time, I think it started with the letter M.
I had my iMac turned off for a couple hours after that. When I turned it back on, I was ripping 4 CD's into iTunes and so it sounded like the CPU was running high again through that, but I think that's typical for when I'm ripping a CD. Anyhow, right now the CPU is running normal, about 20% of total cycles used and that Pattern ? whatever program has disappeared from the list. So maybe that was something that the Combo Updater 10.5.4 was using to fix a problem and it might be back to normal again.
So, so far so good, thanks to the people here who have helped. I will post again if the problem persists.
Also, Pondini, thanks for reminding me to check posts in the forum for information. I almost always do that initially, before I post my question. I did that this time, but I had no idea at the time that downloading the combo updater would be the solution as I was scanning the forum for people who had spiking CPU's, not any other type of problem. I suppose in hindsight, after finding that combo updater might be a possible solution to my problem I should have ended this thread and sought new information, posed a new question / post if necessary. But like you say, I would have found other posts about installing combo updater.
Travis

All-in-one PC volume is too low even when maxed out

When playing web content with sounds like youtube videos, the sound is too low even when the volume in the cotrol panel is already maxed out. what do i do? My desktop is an hp 22 all-in-one touchsmart pc.
Thanks!
Cynch

Hello @Cynch,
I understand that you are having issue with your HP TouchSmart 22 All-In-One Desktop PC where the volume is low when listening to online content. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various version of the HP TouchSmart 22. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Memory maxed out when running weblogic 4.5

I am the tech support guy for my office, but I am WebLogic illiterate. I have a user who is running WebLogic, but when he runs it, his RAM and virtual memory max out. Are there any settings in WebLogic for memory allocation? Or is there a known problem with memory?

Please see my reply in misc.
Michael Girdley
Product Manager, WebLogic Server
BEA Systems Inc.
Jay A. Fulks <[email protected]> wrote in message
news:89gt0e$91a$[email protected]..
Hi.
I am running WebLogic 4.5.1.5 under Solaris 2.6. I am using JDK 1.2.2
with HotSpot. When we shutdown our server, it essentially crashes with
the following error:
# HotSpot Virtual Machine Error, Unexpected Signal 11
# Error happened during: mark sweep
# Error ID: 4F533F534F4C415249530E4350500BC2 01
After looking into the problem, we found that it is easily recreatable,
simply
by (1) starting the server, (2) hitting any web page (which causes
FileServlet
to be loaded), and (3) shutting down the server.
I have attached a tail of my log file as evidence.
Anybody else seen this problem? Is it a Weblogic/HotSpot compatibility
problem?
Thanks.

Macbook Air 2011 CPU Maxes Out then Overheats and Shuts Down...

I've been having this problem for a while now but have learned to deal with it with SMC Fan Control to basically keep my fans maxed out at all times. This is obviously not ideal.
The problem is that at any given time some small, random task in activity monitor shows CPU usage that is very high, often at least 50% CPU and other times as high as 120% It has happened with the tasks like dock, safari web content and virtually any other task you can imagine.
For example, I just tried emptying my recycling bin and it hung half way through then my computer shut down. What is going on here?
Details:
- Macbook Air mid-2011 running Mavericks
- Never have more than one app open at any given time, usually just Safari with about 5 tabs, max
- 3rd party applications running in background include Dropbox, Copy, Backblaze, Flux, Sophos anti virus, Jumpcut, Caffeine and that's it
If I'm doing something like a Time Machine backup, I have to disable Wifi, max out the fans and only then will the Macbook Air remain cool enough to complete the backup, otherwise the Time Machine process maxes out the CPU, overheats and shuts down. This happens with virtually everything now.
How can I start trouble shooting this problem? I've run the hardware and system repair checks with no results, done an SMC reset, etc.
This really seems like a software issue more than anything, like something related to the way tasks/processes are handled...any ideas anyone? This is such an annoying problem!

Do the problems also occur in "Safe Mode"?
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

Solaris Environment Manager maxs out memory.

We have a forte system in production, running on two Solaris 2.6 boxes. Each
has its own environment and they are connected. Our environments are called
"Data Center" and "Call Center". Our Forte memory settings are fairly
standard. We start at 20Mb and max out at 64Mb. We also have Forte keepalive
enabled, with the Forte recommended values. We are running Forte 3.0.L.3 and
using Oracle 8.0.5 for our database (as if it mattered). Each environment
has 1 or 2 NT Server boxes in it, and the clients are all NT4 using a model
node. Our Solaris machines have the patch installed that fixes the problem
that Peggy Adrian posted about earlier in the year.
Three times now in the past week, we have suddenly had the environment
manager for the data center suddenly start chewing up memory. When the data
center manager gets to about 64Mb, the data center environment manager
starts to do the same thing. Soon after, both environments die a hideous
death, and we have go in and start the node managers again.
Please note that we always export our environments to a ".edf" file and
bootstrap the environment manager (removing the environment repository)
whenever we install a new copy of the Forte applications, or whenever our
node manager dies (which seems far more frequent that I would like).
Interestingly, the environment repository hadn't grown any after the
environment manager "runs up the curtain and joins the choir invisibule".
If anyone can throw some light on this, and point us in the direction to
look to solve this problem it would be much appreciated.
Nick.

Hi,
@ Sunny: Thanks for response, the referred note was already checked and parameters are in sync as per note.
@Mohit: SAP wouldn't proceed till create database if Oracle software was not installed. thanks for the response.
@Markus: Thanks I agree with you, but I have doubt in this area. Isn't it like project.max-shm-memory was new parameter we need to set in local zone rather using shmsys:shminfo_shmmax in /etc/system. Do we need to still maintain this parameter in /etc/system in global zone.
As per SUN doc below parameter was obsolete from Solaris 10.
The following parameters are obsolete.
■ shmsys:shminfo_shmmni
■ shmsys:shminfo_shmmax
As per your suggestion, do we need to set below parameters in that case, please clarify.
Parameter                           Replaced by Resource Control      Recommended Value
semsys:seminfo_semmni   project.max-sem-ids                      100
semsys:seminfo_semmsl   process.max-sem-nsems               256
shmsys:shminfo_shmmax project.max-shm-memory             4294967295
shmsys:shminfo_shmmni   project.max-shm-ids                       100
Also   findings of /etc/release
more /etc/release
Solaris 10 10/08 s10s_u6wos_07b SPARC
Regards,
Sitarama.

HELP! File cache Maxed out at startup

Hello everyone, I have used this forum to answer my everyday questions but I have not found the answer to this question. As of late my Mac's file cache gets maxed out instantly. I have 32GB of RAM and near 28GB gets used up in the file cache. I try using memory cleaner and the file cache will not delete. I have to use the terminal command "sudo purge" to delta the file cache. Just yesterday, I started up my mac and 27GB was already in use in the file cache.
I recently installed Lightroom 5.7.1 and Camera Raw 8.7. And the problems have started since I installed one of these apps.

Un-install Memory Cleaner and let the OS handle memory. It does a better job. Un-install using the developers instructions.
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks also Yosemite
Safe Mode - About

Coding Solvency Simulator, Maxing out with jdk1.3?

Am using java to develop a Social Security Solvency Simulator for public use on my Common Sense on Social Security website. It appears to me that the tools I'm using are now maxed out by the code I've written. Simple System.out instructions don't execute. I am using JCreator as my development tool, and jdk1.3 as my java platform. I have a 333 MHz CPU and 160 MB of RAM, running Windows 98. My 18 .class files add up to 210 KB, which doesn't seem like a lot, but I do create about 160 somewhat complex Cohort objects in order to track the possible effects of Personal Retirement Accounts. Should I switch from JCreator? Upgrade to a more powerful Java platform? Add RAM? Any suggestions?

i looked at the page in both netscrape and ieeee and had no problems. my system is a pIII 733 with 512mb ram but....
i think your problem(s) have other causes than this.
1) your not printing out system messages... ummmmmm.. yes you are
here are some sample messages from ie
ssData: Cum PRA Taxes, aggregate, = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
and here is from netscrape
ssData: Cum PRA Taxes, aggregate, = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
Decisions3: targetBenefitChoiceZF = 0.94
Year for retiring at 66 = 2008
year for retiring at 67 = 2025
year for retiring at 68 = -1
year for retiring at 69 = -1
Year for retiring at 70 = -1
ssData: Cum PRA Taxes, aggregate, = $0
CohortMgr: Cum PRA Taxes Paid = $0
in both cases you have to access the java console in the application to see these. you may already know this but since i can see stuff and you say you can't i wonder if this isn't the problem.
2) you are complaining sort of about performance. i would definitely throw all your class files into one big jar. right now you are causing the browser to download all the files it needs on an individual basis... this is very slow.. put it all in one archive file and this will go faster
here is the big explanation of why...
all files 40 (wild guess here)
in 40 files (200k) vs 1 jar file(210k)
download time over 56k modem connection speed of about 5.3k
200k + (40 files X 2k HTTP overhead each file) = 280k
total download time 52.8 seconds
or...
210k + (1 file X 2k HTTP overhead each file) = 212k
total download time 40 seconds
as you can see this is quite a difference especially as my assumptions are biased against the jar file. namely the http overhead is low and we assumed NO compression for the jar file.
for more information on jar'ing stuff try here http://developer.java.sun.com/developer/Books/JAR/
well i hope this is all helpful

Making a loop that will stop when a double or a float will max out

Can someone tell me to how I can create a loop that will take a float abd a double value each with a beginning value of 2 and double each value until both variables run out of memory, and return the maximum valid value for each variable? I assume I will need two loops to do this, but I am not sure how to get the loop to stop. I have had the values go into crazy negative numbers when it starts to max out.

So it does. Apparently that example only works for fixed point math... I did
System.out.println(Double.MAX_VALUE * 2);and it said "Infinity" which I find a little humorous. In any case, try the static methods Float.isInifinite() and Double.isInfinite()
EDIT: even weirder!
public static final double POSITIVE_INFINITY = 1.0 / 0.0;

Narration too quiet with levels maxed out

Hi! I'm trying to record narration in Premiere Elements 7 and despite my levels being maxed out, it's still way too quiet. I just purchased a Blue Snowball Ice USB mic. I also tried it with a non-USB mic and got the same result. I also tried recording through Soundbooth CS4 and it sounded the same. I've tried to adjust the levels both through Windows control panel and in the narration recorder window in Premiere but nothing helps. Any ideas?

julieoolie
Thanks for the follow up with the additional details.
From your details, this is not a Premiere Elements issue. Rather it is an issue involving
your computer sound system and equipment.
If you were stuck with a bunch of low volume narration clips from whatever source, you could consider looking at
at the the following which uses the free audio editor Audacity to increase volume (Amplitude)
Audacity tutorial:making the sound track louder, increasingthe Amplitude, or normalizing the volume levels
Audacity: Free Audio Editor and Recorder
Then you export the volume adjusted clips from Audacity (.wav or .mp4) and import them into the Premiere Elements project.
But, the focus would appear to be on the system volume settings for recording and speakers. So, I am not sure if there is any
merit in working with Audacity in a sound flawed system. You could try.
There is a maneuver in Premiere Elements that you could look at when you have the audio clip volume at max 6 dB and the volume is not loud
enough. Make copies of the audio clip and place the copies directly above one another on the audio tracks. Keep stacking them until
you get the increased volume that you want.
Please review and consider and then we decide what next.
Thank you.
ATR

250gb tm drive - maxes out at 7 backups?

Just curious if these ratios sound right, or if there is a preference I don't have set up correctly. I have time machine set to back up my entire internal hard drive rather than select folders like "my documents." I did this so I could restore the whole system using the leopard disk in the event of a catastrophic failure.
I'm not getting many backups before maxing out my 250gb drive. I have an internal drive with 78 gigs of material. I have had my time machine backup drive plugged in each day this week. The time machine backups currently have one backup from 01/14, one backup from 01/15, and 5 from today 01/17. My 250 gig time machine now only has only 36 gigs free. I understand that time machine makes one complete backup and then incremental backups of any changed files (via virtual links). I guess it's doing this because if I had 7 complete file for file backups it would total about 550 gigs, but there haven't been that many changes to my system between backups... Doesn't seem right. Can I really only expect about 7 backups on a 250gig hard drive? Also, is there any way to specify how often it backs up. If I can only expect 7 backups it would be nice to have it do it every other day, rather than using them all in an afternoon... Something doesn't seem right.
Thanks for any insight.

I've had similar issues. I have a 120GB drive backing up 60GB of my 80GB internal drive. I checked my Console and found this error:
Jan 19 19:26:42 eMac /System/Library/CoreServices/backupd[1774]: Backup requested by automatic scheduler
Jan 19 19:26:42 eMac /System/Library/CoreServices/backupd[1774]: Starting standard backup
Jan 19 19:26:43 eMac /System/Library/CoreServices/backupd[1774]: Backing up to: /Volumes/FireWireDrive/Backups.backupdb
Jan 19 19:26:44 eMac /System/Library/CoreServices/backupd[1774]: Event store UUIDs don't match for volume eMac
Jan 19 19:26:44 eMac /System/Library/CoreServices/backupd[1774]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
Jan 19 19:38:31 eMac /System/Library/CoreServices/backupd[1774]: No pre-backup thinning needed: 7.51 GB requested (including padding), 45.38 GB available
Jan 19 19:38:37 eMac /System/Library/CoreServices/backupd[1774]: Error: (-8088) copying /Applications/iPhoto.app/Contents/Frameworks/DotMacKit.framework/Versions/A/Dot MacKit to /Volumes/FireWireDrive/Backups.backupdb/eMac/2008-01-04-200348.inProgress/00CF5 18D-1629-4880-AA45-17D61F3184BF/eMac/Applications/iPhoto.app/Contents/Frameworks /DotMacKit.framework/Versions/A
Jan 19 19:48:31 eMac /System/Library/CoreServices/backupd[1774]: Copied 52 files (45 KB) from volume eMac.
Jan 19 19:48:32 eMac /System/Library/CoreServices/backupd[1774]: Backup canceled.
Can anyone explain what's happening here? Thank you.

Beginning of song play causes iTunes to max out CPU and rewrite library

I'm experiencing a strange problem with iTunes for Windows. Whenever a song plays, about 5 seconds after it starts, the CPU maxes out for 20-30 seconds. This occurs either when the next song plays in a playlist, when I manually start a song, or if I've paused a song in the middle and start playing it again. I used a process monitoring program, and it's not the iTunes process that maxes out the CPU when this happens, but the system process, and when it happens it always shows that it's writing to three files, sequentially in this order (with the first two being written to twice):
1) [iTunes Music Folder]/iTunes Music Library.xml
2) [iTunes Music Folder]/Temp File
3) [iTunes Music Folder]/iT.tmp
4) [iTunes Music Folder]/iTunes Music Library.xml
5) [iTunes Music Folder]/Temp File
The "Temp File" has no extension. This is a really annoying problem; it's been happening for about two days, but I can't think of any associated system change. I'm running Windows XP SP 2 with iTunes 7.0.2.16. Any help with this would be greatly appreciated.

I do have a very large library--about 6000 songs. However, it's been that large for a long time, with no problems. It seems like it usually just updates the library when it closes. If it's been doing it on every song play before, it hasn't been taking 30 seconds, but something so small that it doesn't show up on my process monitor, which I'm constantly paying attention to.
It doesn't seem like this is a hardware problem, but some setting or something that got changed to make it rewrite the entire library every time I edit it.
I did check the Windows Event Viewer and couldn't find anything helpful.
A couple other things that I've changed recently that could have an effect:
1) Yesterday I set a bunch of songs to not come up on iTunes shuffle; before I hadn't used this setting.
2) I attempted to make iTunes treat some mp3s as podcasts so that it would remember their play position. In the process of doing this, it decided that it wanted to re-download all of the back episodes of a particular podcast I subscribe to. I then figured out that you can set particular songs so it remembers their playback position, and instead just added those mp3s normally and set that option.
I unset the "don't use this song when shuffling" option for all songs, and also deleted my subscription to that podcast, to see if those things would have any effect, but they haven't. It seems like the podcast thing has something to do with this, though, because I think the problem started around the time that I tried that. Any thoughts?

AFP many duplicate users, throughput maxed out

Hello,
I just completed the 10.6.7 update to my server and rebooted. Upon start-up, everything seemed to be fine, but users indicated that they could not connect to AFP shares.
I opened Server Admin and checked out AFP- it was running but I had 4 times the number of connections as normal and my throughput was maxed out. I checked the connections- I had many multiples of the same users/ip addresses. I know you can have multiple connections from the same machine, but in this case many of them were students that only have access to a single share.
The log has many recurring messages about "No matching key" and the longer i let it sit, the more connections keep showing up.. This continues until the server's throughput is maxed.

I was able to resolve this issue by completely shutting down AFP and restarting the server. Then After the full system restart, I started the AFP service. Duplicate entries no longer appear.

Cpu maxed out at all times..

I'm very concerned about my Gnome install. I updated for the first time in a while, and rebooted - just to see how things were. I started X (no issues), and Gnome loaded quickly. The problem is that my CPU is now maxed out for no reason, and it never drops between the 95% mark. Gnome system monitor is reporting 100% usage, but when I check my processes with it, I can't find the culprit. htop shows that X is using 94-100% CPU - something that I find hard to believe.
Here is htop output;
http://img411.imageshack.us/my.php?imag … &via=yfrog
Also;
xorg-apps 7.4-2
xorg-font-utils 7.4-1
xorg-fonts-100dpi 1.0.1-2
xorg-fonts-75dpi 1.0.1-2
xorg-fonts-alias 1.0.1-2
xorg-fonts-encodings 1.0.2-3
xorg-fonts-misc 1.0.0-4
xorg-res-utils 1.0.3-2
xorg-server 1.4.2-2
xorg-server-utils 7.4-4
xorg-twm 1.0.4-3
xorg-utils 7.4-3
xorg-xauth 1.0.3-1
xorg-xinit 1.1.1-1
xorg-xkb-utils 7.4-1
xorg-xsm 1.0.1-2
gnome-applets 2.26.1-1
gnome-audio 2.22.0-1
gnome-control-center 2.26.0-1
gnome-desktop 2.26.1-1
gnome-games 2.26.1-1
gnome-icon-theme 2.26.0-1
gnome-keyring 2.26.1-1
gnome-media 2.26.0-1
gnome-menus 2.26.1-1
gnome-mime-data 2.18.0-3
gnome-mount 0.8-1
gnome-netstatus 2.26.0-1
gnome-nettool 2.26.1-1
gnome-panel 2.26.1-1
gnome-power-manager 2.26.1-1
gnome-python 2.26.1-1
gnome-python-desktop 2.26.0-1
gnome-session 2.26.1-1
gnome-settings-daemon 2.26.1-1
gnome-system-monitor 2.26.1-1
gnome-terminal 2.26.1-1
gnome-themes 2.26.1-1
gnome-utils 2.26.0-1
gnome-vfs 2.24.1-2
gnome-volume-manager 2.24.1-1
libgail-gnome 1.20.1-1
libgnome 2.26.0-2
libgnomecanvas 2.26.0-1
libgnomecups 0.2.3-4
libgnomekbd 2.26.0-1
libgnomeprint 2.18.6-1
libgnomeprintui 2.18.4-1
libgnomeui 2.24.1-1
policykit-gnome 0.9.2-3
Can some one help me fix this? thanks..
* Note: I do use [testing], if that helps.

i would guess that since you're still using xorg-server 1.4, that it probably relates to this problem?
http://bbs.archlinux.org/viewtopic.php?id=69132
and
http://bbs.archlinux.org/viewtopic.php?id=69121

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

System Maxing Out!

Similar Messages

Maybe you are looking for