System measurement user types

while running transaction usmm for system measurement i noticed i get
results regrading 3 kinds of users - professional,limited pro,employee.
according to which principle the clasification to user types is made? -
in other words can i move user from one clasification to another
(professional to limited pro for example) or is it related to
rolesgiven to each user?.

Hello Moshe,
I don't get you. What's your problem?
User types are for pricing.
So every user type stands for a different fee you have to pay to SAP.
An user who only want to see data is cheaper than an user who want to change data.
When you do a system measurement and send the data to SAP, then they can evaluate the users with a certain user type and compute the fee for your user licenses.
Regards, Michael
p.S.: I never mentioned a test user type

Similar Messages

Which table store the user type attribute details on 4.5b version

Hi,
I am hunting for the table which store the user type attribute.To simply the problem when i create user in the 4.5b system using su01 tcode & when you select user type from logon data say you select Dialog or BDC or Background and CPIC type now where this information is store in the table, what i got from system is User type (A=online, C=CPIC, D=BDC, O=ODC) but on UI it is showing as Dialog or BDC etc. which is confusing me.
so can anyone tell the table which store detail info about say A = Dialog or D = BDC user type.
thanks,
John.

Hi John,
These are the Fixed values allowed to this Domain. No value table is maintained but they maintain the Fixed values in the Value Range Tab of the Domain.
Go to SE11--> Domain Name ---> Display --> Select Tab strip Value Range, where you can see the fixed values for this Domain.
Satya

Provisioning different User Type to different systems

Dear Experts,
Is there a way by which we can provision different user types to defferent systems via CUP?
We have the following requirement:
1. User created in ECC should be dialog user
2. User created in BW should be service user
3. User always selects ECC and BW at the same time in one request
Thanks for your attention.

Hi Tang,
You can try this with creating 2 different custom field or 2 unused field in end user form like employee type and some other field. Then you need to define provisioning field mapping for both of these system differently.
Like you created 2 fields EEC_USER_TYPE & BW_User_TYPE then while making provisioning field mapping you need to create 2 different group. EEC_Mapping and BW MApping and map the respective custom field with Provisioning field mapping group.
I hope this will help you.
Regards.
Hemant

Portal System Object - ABAP User Type?

Hi
I've created a System Object, which will be used to connect to a NW '04 system. I'm using UIDPW as the Logon Method, and have defined the relevant user mappings.
When I test the connection using a normal Dialog user in the ABAP backend, everything works perfectly. However, when I use a Communication user, the connection test fails.
Does anyone have any suggestions on getting the connection to work with a Communication user? What is the recommended ABAP user type for backend connections? I assume Communication user is recommended, as this doesn't allow dialog login, etc.
Thanks
Stuart

Having done further investigation, it seems the problem is not with the user type. I'm able to connect when assigning the SAP_ALL profile to my Communications user (which I obviously don't want).
What permissions must I assign to this user to allow it to log in? All I've done so far is assign permissions on the S_RFC authorisation object to allow RFC calls to my function group.
Do I need to assign additional login permissions?

System Measurement: Measure and report license usage - System Type

After a 'system copy' to create new DEV and QAS PORTAL systems from a copy of PROD the USMM (System Measurement: Measure and report license usage) process identifies the System Type of the new systems as PROD.
This was first noticed when performing a 'License Audit'.
System Type: PROD
(Ex: URL http://<server>:<port>:50000/usmm)
Where can the 'System Type' be changed after a 'system copy'?

Hi,
You can change the System Type in Visual Admin under service Licensing Adapter.
Thanks
Sunny

RFC USER USER TYPE- SYSTEM/SERVICE?

Hi,
We are using CTP method of GATP.
Currently our user type for RFCUSER (Usermentioned in rfc destination) is service? It allows dialog mode this is security concern for us as RFC USER as all authorisations.
When we changed it to system user it is giving error while triggering GATP. Also there is dump in SCM system with message
"DYNPRO_SEND_IN_BACKGROUND"
"/SAPAPO/SAPLATP4" or " "
"SYSTEM-EXIT".
pls. suggest solution
Regards,
Santosh

Hi,
This info i took it from help library.
If you want the ATP check to be performed in SAP APO but triggered from SAP R/3, make sure when
defining the RFC connection of the SAP APO system in SAP R/3 that you use a user ID for the SAP APO
system that was created there as a dialog user.
Thanks,
nandha

Set user type to system

I have to set the background user type to 'System'. What would be the background user account?

Hi,
Open this link & Read it; you will get information of type of users
http://help.sap.com/saphelp_nw70/helpdata/en/3d/3272396ace5534e10000000a11405a/frameset.htm
Thnaks,
Nagaraju

Contractual User Type: 11 Multi-Client/System

Hi,
In BW 3.5 we had option to select Contractual User Type: 11 Multi-Client/System under Licence Data of Users.
However, in BI 7.0, we do not see option 11 Multi-Client/System at all.
Can you please advise,why this is not there? Is it replaced by some other type?
Best Regards,
UR

Hello,
you can select the available license types in transaction USMM (Tab User types). Check before you use license type 11 if there is only the need for it. In general you don't need license type 11 in a common SAP environment.
Regards,
Milan

System Measurement

Hello Guys,
I am performing System Measurement USMM in our Development System.
I have 4 clients in the system, but we are using only one client out of it. So selected that particular client only for measurement.
I got the result as below:
Results by User Type
UserType                                        ID                 Surcharges               Number
Test                                                91                                                       21
SAP Application Developer            CA                                                        1
Distribution of Technical User Types
Dialog                                            1
System                                          3
Communications Data                   3
Reference (Logon not possible) 13
Service                                        15
We have purchased only 1 Developer License.
Please help me understanf following questions:
1.   Based on above output, hw much licenses will SAP consider in the Development system?
2.   Will SAP consider Service users also for licensing? The Service users are accounts like ADS_AGENT, Service users from R3 to Poratl connectivity.
3. Since I have 3 more clients (excluded from Measurement), will the users from those clients also be considered for SAP Licenses? There are about 1000 test users from other 3 clients.
Thanks
Sagar

Sagar,
Subject to your agreement with them, it would normally only be the number of users in the Production system that SAP would want to know about. The number of users in DEV is usually not an issue. The only thing they might query is if you have several developers in the DEV or TEST systems, but not in Production.
They don't count Service users or Communication users.
Tony

USMM: System Measurement

Hi,
System: ECC Development
When we run the Transaction USMM to check the System measurement, the log is not displaying the Enfine details for PO, Sale Order, Contracts, WM.
Howvever, we get all the user level details like Users with SCCR key, different user types, the clients in the system, the installed components.
Its just that Engine measurements for FSCM, WM, PO, SO, Contracts are not displayed.
My question is:
Are the Engine measurements done even for Development environment or is it displayed only for Production environment? FYI, We are not yet live.
Cheers,
Akash

Hi,
usmm in ECC 6.0 displays all the data, the order is below. If you can't see the data, check the background jobs related to it are completed.
SAP Version info contails application release and SP levels
In System measurement: Statistics
Status of background jobs
List of clients
Measurement results by client (user details)
User with SSCR key by client
Automatically Excluded SAP Technical Users
0100 mySAP Human Resources
5000 Procurement Orders
5100 Sales Orders
5200 Service Orders
Employee/EHR Users Statistics
Regards,
Gowrinadh

Message no. AK005 - Asset is investment measure, transaction type not allow

Dear All,
I am getting following error while transfering Investment AuC to Main Asset.
Message no. AK005 - Asset is investment measure, transaction type not allow
I searched the Forum and got some input.., but in that I have a clarification.
Please see my doubt and the forum input.
Internal Order as Investment Measure:
Can you explain me Step 10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88 once again.
How we can give the Receiver Main Asset master in KO88. In KO88 we can only provide the Internal Order. But that Internal Order is already settled to AuC in Step 8.
Please guide me.
Thanks.
Regards,
nms
Re: Settlement of cost center to final asset ?
Posted: Oct 27, 2009 11:40 AM
Hi,
Are you doing any settlement using the AUC asset ?
Normal practice is to Create an Auc Asset and settle cost to Auc. Once the asset is ready for use, finally settle the Auc to final asset.
This can be done in two ways like - line item settlement / investment measure.
Below are steps in two scenarios :
Internal Order as Investment Measure:
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
c. Planning Profile - OKOS
d. Budget Profile - OKOB
6. Create an Internal Order - KO01
a. With the Investment Profile (Step-2)
b. AuC automatically created by the system using Asset Class given in the Investment Profile
7. Post the amounts to IO - FB01
8. Settle the amounts to AuC from IO (Prcg type: Automatic) - KO88
9. Create the Main Asset - AS01
10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88
AuC using Line Item Settlement:
1. Define the AuC Asset Class (with Line Item Settlement) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Order Type (Overhead) - KOT2
4. Create an AuC-Asset (using Step-1 Asset Class) - AS01
5. Create an Internal Order - KO01
a. Assign the AuC u2013 Asset in Settlement Rule in IO
6. Post the amounts to IO - FB01
7. Settle the amounts to AuC from IO - KO88
8. Create Main Asset (using Step-2 Asset Class) - AS01
9. Assign the Main Asset in IO (Step-5) - KO02
10. Settlement AuC u2013 Line Item List - AIAB
11. Settlement AuC - Receiver - AIBU
VVR

nms,
Your message is not very clear - while you have mentioned at what stage are you getting the above-mentioned error message, you haven't mentioned exactly what you were trying to do. The fact that you are getting this error is a straight-forward indication that you are attempting to do something that SAP does expect.
However, answering your query about how to use KO88, you have to settle the AuC to a FA (fixed asset, with asset class other than AuC ), as that will close the open AuC, transfer the value from the AuC to the FA and from this point onwards, all transactions will happen to this FA. Your statement "in KO88, we can only provide the Internal Order" is incorrect.
Hope this helps.
Regards
Gulshan

Unknown user type: oracle.jbo.domain.Date exception from time to time. How to solve?

Hi,
This is the first time I am using Coherence to cache some lists in my ADF Application. This is my objects configuration file:
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
    <user-type-list>
        
        <include>coherence-pof-config.xml</include>
        
        <user-type>
            <type-id>1001</type-id>
            <class-name>package.dataproviders.TFDO1Services</class-name>
        </user-type>
        <user-type>
            <type-id>1002</type-id>
            <class-name>package.dataproviders.TFDO2Services</class-name>
        </user-type>
    </user-type-list>
    <allow-interfaces>true</allow-interfaces>
    <allow-subclasses>true</allow-subclasses>
</pof-config>
I have implemented the portableObject interface to each of my objects and they look like this:
    @Override
    public void readExternal(PofReader pofReader) throws IOException {
        this.tfMyList = (ArrayList<GenericRowData>) pofReader.readObject(0);
    @Override
    public void writeExternal(PofWriter pofWriter) throws IOException {
        pofWriter.writeObject(0, this.tfMyList);
Please any help would be great!

Hi Alejandro,
Please note that when POF serialize collections it is somewhat lossy, in that when you deserialize the collection you may get a different collection implementation. I.e. you're list will come out as a an implementation of java.util.List but not necessarily a java.util.ArrayList, so just cast to the List interface. If you absolutely need a certain class impl type then you can use the readCollection method passing in the list you wish to have populated.
thanks,
Mark

HT203192 "networksetup is trying to modify the system network configurations" type your password to allow this.

"networksetup is trying to modify the system network configurations" type your password to allow this.Type your password to allow this. No amount of password typing seems to satisfy the request. The pop up box will not go away!!!!

Hi Glenyse,
Did you find the answer to your question? I have the same problem. Or can anyone else help?
My wife’s 2012 Macbook Pro has Yosemite and is using Wi Fi for the internet connection.
Every time, both on startup and awaking from sleep, a window appears on the desktop with a locked icon saying, “Networksetup is trying to modify this system. Type your password in to allow this”.
The window (which can’t be moved or dragged) shows the computer’s user name. The password has to be repeatedly typed in as many as 10 times and the highlighted ‘modify configuration’ box clicked before the window disappears and the computer then functions normally.
Needless to say, this is driving my wife up the wall… I would certainly appreciate information on how to get rid of this troublesome window!

RFC User Type

Hi
Calling gurus.
When gererating RFC users for the READ and TMW rfc's in Solution Manager users gets generated, and I know the user type is Communication user, however should you be forced to have to create your own users to use within this rfc would it be best to stick to communication user type, or could a system user type be used.
It is my understanding that logon via read rfc should not be allowed as it could be a security risk.
If I am on the wron track please enlighten me or point me towards a conclusive best practice regarding this.
Thanks in advance.

Hello again Paul,
1.-
At the same 2008 manual "Activating the SAP EarlyWatch Alert on Solution Manager 7.0" yo can see on page 11 this:
...A working dialog connection such as *TRUSTED or LOGIN. Once the *BACK destination is created, these can be deleted again...
This prerequisites are need for the creation ob RFC "_BACK" on remote system, but for remote call of sdccn the prerequisites on Page 15 are not enough !!!
If you want to call remotely sdccn from solution manager you need a dialog trusted connection.
I have just tested on our solution manager 5 minutes ago, you are invited to our solution manager if you want to check it.
2.-
What about this:
My question is, Will take into account SAP this users for the "SAP Security user audit" ?
Regards:
Luis

Meaning of User types & their use....

Hi all,
Please explain me below user types and their significance in brief:
USR02-USTYP Description
A             Dialog
B             System User (Internal RFC and Background Processing)
C             Communication User (External RFC)
L             Reference User
S             Service User
Regards,
Sachin

User Type
Dialog 'A'
A normal dialog user is used by one person only for all types of logon.
During a dialog logon, the system checks for expired and initial passwords and provides an option to change the password.
Multiple dialog logons are checked and logged if necessary.
System 'B'
Use the system user type for internal system processes (-> background processing) or system-related processes (-> ALE, workflow, TMS, CUA).
Dialog logon (using SAP GUI) is not possible.
A user of this type is excluded from the general settings for password validity. Only user administrators can change the password using transaction SU01 (Goto -> Change Password).
Multiple logons are permissible.
Communication 'C'
Use users of type Communication for dialog-free communication between systems (-> RFC or CPIC) .
Dialog logon (using SAP GUI) is not possible.
The general settings for the validity period of a password apply to users of this type. Users of this type can change their passwords (like dialog users). The dialogs for changing the password must be provided by the caller (RFC/CPIC client). You can use the RFC function module USR_USER_CHANGE_PASSWORD_RFC or the RFC API function RfcOpenEx() to change the password.
Service 'S'
A user of the type Service is a dialog user that is available to an anonymous, larger group of users. Generally, this type of user should only be assigned very restricted authorizations.
For example, service users are used for anonymous system access using an ITS service or a public Web service. Once an individual has been authenticated, a session that started anonymously using a service user can be continued as a personal session using a dialog user (see SUSR_INTERNET_USERSWITCH)
During logon, the system does not check for expired and initial passwords. Only the user administrator can change the password.
Multiple logon is allowed.
Reference 'L'
Like the service user, a reference user is a general user, not assigned to a particular person. You cannot log on using a reference user. The reference user is only used to assign additional authorization. Reference users are implemented to equip Internet users with identical authorizations.
On the Roles tab, you can specify a reference user for additional rights for dialog users. Generally, the application controls the allocation of reference users. You can allocate the name of the reference user using variables. The variables should begin with "$". You assign variables to reference users in transaction SU_REFUSERVARIABLE.
This assignment applies to all systems in a CUA landscape. If the assigned reference user does not exist in one of the CUA child systems, the assignment is ignored.

System measurement user types

Similar Messages

Maybe you are looking for