System memory issue

My system runs very slowly at times and returns "not enough memory" messages. I have run the HW test and have 4GB avail, what could be wrong?

When do you receive these out of memory errors? What application is involved. OS X doesn't run out of memory. If there isn't enough RAM the OS will simply utilize the disk drive to provide additional memory but this will result in a drastic slowdown in overall performance, especially if your drive doesn't have much free space available.
In any event you need to provide more information than you have.

Similar Messages

Rendering and Low System Memory issues in PE9.

Hello again.
N.B: I am an ex-PE3 user.
I am having a few issues with PE9.
1. My main issue is that I am regularly getting the 'low system memory; please proceed with caution' message. I have googled it and read people's suggestions, but am not sure where to go from here. I have tried saving my file under another name, but am already up to '....E' (fifth) version of the file I've been working on this afternoon. The total time of the project is only approx 45 min's, although I will say that this 'low system memory' issue seems to be worst today, as I'm adding more still photos.
2. One of the suggestions made by Steve G on one of the forums was to make sure projects are regularly rendered. When I hit 'Enter' to render, the little render window pops up for a split second and then disappears. And I would assume from the red line above my timeline that my file is not rendered.
3. When I switch to 'Sceneline' view, my horizontal scroll-bar across the bottom will only drag SO far (to a certain point in my project; but definitely not to the end of my project. It is really frustrating. I sometimes can fix it by flicking between Sceneline and Timeline, but I have to do this multiple times... and it seems a ridiculous way to do it.
It would be fantastic if someone could help me with these issues, please!
System details:
AMD processor 3.2 Ghz
4 gig RAM (3.12 gig usable)
Windows 7 Ultimate

Hi everyone:
Thankyou for all your suggestions.
Sorry, Bill, but both those links give me an error message. I was all set to read them, but they won’t work, unfortunately.
What is meant by ‘page file managed’, sorry? And do you mean ‘hard disk drives’ by HDD, or does it stand for something else in this context? I’m not sure what you mean by how do I have them allocated. Again, apologies for my ignorance. I do have only one HDD, but it is partitioned.
The image sizes all seem to have a depth of 24, but vary in dimensions – I can see that some are quite large (around 3 mg in size, with dimensions of 4288x2848, for example). Is the actual mg-size relevant, or only the physical length and width?
I have tried to look at the frame size of my project, but it seems to be greyed out. In pale digits, there is 720x576 written.
Just before I sent this, I thought of one other thing to try first.
I tried starting a ‘New Project’. I then inserted just 6 still photos, for experimentation purposes. I then hit ‘Enter’ and the Rendering window came up and appears to have rendered correctly. So I then tried looking at one of my other projects (that hadn’t previously been rendered) and tried to render it. In this case, as in for the project I am currently working hard on, the Rendering window flashes up for about ¼ of a second and then disappears.
What is going on???
From: Bill Hunt [email protected]
Sent: Friday, 11 March 2011 2:00 AM
To: rachel jewiss
Subject: Rendering and Low System Memory issues in PE9.
although I will say that this 'low system memory' issue seems to be worst today, as I'm adding more still photos.
What are the pixel x pixel dimensions of those still images?
What is the Frame Size of your Project?
How is your Page File Managed, and what is the size? This http://forums.adobe.com/thread/632449?tstart=30 will give you some background and tips.
Also, tell us about your HDD's, and how you have them allocated.
For more discussion on Rendering, please see this http://forums.adobe.com/thread/794719?tstart=0.
Good luck,
Hunt

Low system memory issue - caused by Mail?

While I was at work, my wife was using our iMac at home, and she said that a weird error dialog appeared this afternoon that asked her to quit applications, following which the system became unresponsive.
When I came home I found that a lot of running applications were in a hung state (unresponsive and required a Force Quit) so I rebooted the iMac.
I looked in the Console and saw that at 15:39:37 today two errors started repeating at an enormous rate - something like 5000 times per second for the next 5 seconds:
12/02/2015 15:39:36.373 Mail[226]: *** Assertion failure in -[MCSocket readBytes:maxLength:error:], /SourceCache/Mail/Mail-2070.6/MailCore/Networking/MCSocket.m:469
12/02/2015 15:39:36.381 Mail[226]: exception parsing IMAP response: trying to read/write concurrently
...then at 15:39:42 the rate suddenly decreases to only about 10 errors per second. This continued for a further 15 minutes, until at 15:55:22:
12/02/2015 15:55:22.000 kernel[0]: low swap: suspending pid 226 (Mail)
12/02/2015 15:55:22.590 loginwindow[797]: -[ProcessPanel(lowMem) initAsLoMemPanel] | Lo-Memory panel initializing
...then lots of errors like this:
12/02/2015 15:55:23.000 kernel[0]: memorystatus_thread: idle exiting pid 999 [com.apple.MailSe]
12/02/2015 15:55:24.000 kernel[0]: memorystatus_thread: idle exiting pid 1000 [com.apple.InputM]
12/02/2015 15:55:25.000 kernel[0]: memorystatus_thread: idle exiting pid 269 [com.apple.intern]
So it looks to me like the Mail app went haywire, the Mac ran low on memory, so OS X made some kind of "Lo-Memory panel" appear to handle it.
A quick search in Google Images revealed that there is such a thing as an OS X low memory error - the exact text of which is "Your system has run out of application memory. To avoid problems with your computer, quit any applications you are not using". It displays a list of running apps so you can quit them. The error looks something like this:
    http://i.imgur.com/HDplIwv.jpg
When I showed this picture to my wife she said that is exactly what she saw.
I will report this to Apple on their feedback page. If anyone has any other suggestions let me know. Obviously something that can bring down the entire system like this is not good.

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Memory issue with Podcast !!!

Hi,
I have several issues with the Podcast App.
- i cannot sync podcast that i have downloaded on my laptop using itunes to the iphone,
- when i download some podcast directly on the iphone, i cannot play them, i still have to stream them,
- i have uge memory issues and i think that the downloaded version of the podcast might be somewhere on the iphone, but cannot access / delete them (over 16 GO, i have more than 4.5 GO used for 'other', that are not related to anything...)
i have tried to delete / reinstall the app, but this does not change anything...
Any help ?
Rgds

Quote
I have a MSI 975X Platinum rev 2 mb with a e6300 processor overclocked to 2.24ghz.
If your CPU operates @2.24 GHz, it means that you increased FSB frequency to about 348 MHz.
To make sure there is no misunderstanding here, let me point out the following:
Memory frequency is ALWAYS linked to FSB frequency by the FSB/DRAM Ratio you can select in BIOS. If you select 1:1 for example, the BIOS will show that memory frequency is 533 MHz. This value however, only applies to the default FSB clock speed of 266 MHz:
266 MHz x 1 = 266 MHz (or 533 MHz effective DDR2-frequency).
If your system is overclocked, what counts is only FSB/DRAM ratio, not the memory speed displayed in BIOS. That means, if you set FSB/DRAM ration to 1:1 and FSB frequency to 348 MHz, your RAM will operate @:
348 MHz x 1 = 348 MHz (or 696 MHz effective DDR2-frequency).
The main question is:
What are you talking about when you say, you can't make your RAM operate @800 MHz?
The BIOS does not offer a proper divider to get your RAM to 800 MHz @348 FSB clock speed to begin with.
You have the following choices if your overclock your system:
FSB=300 + FSB/DRAM ratio = 1.33
300 MHz x 1.33 ~ 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=320 MHz + FSB/DRAM ratio = 1:1.25
320 MHz x 1.25 = 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=400 MHz + FSB/DRAM ratio = 1:1
400 MHz x 1 = 400 MHz (or 800 MHz effective DDR2-frequency)
Use CPU-Z to monitor the DRAM frequency that is actually set if you are overclocking.

Memory issues

I have a 2008 Macpro...remarkable up-to -date for its age...I plan to use it for some time yet. Lately I have been a having what seems to be a memory issue. There are 12 gig of Ram installed...6x2 gig each in pairs. Sometimes on boot the screen only shows a flashing folder. I shut down and reboot, and it seems fine...but only 8gig of ram shows installed. I opened it up, unseated the boards that hod the ram, and unseated and reset all he ram, and replaced the boards. Great, all he ram shows, 12 gig again. This morning, a few days later, it did it again, showing 8. So, when I run Crucial's memory analyzer, it shows first four slots full, last four empty. A few questions...are the first four slots the top board, the last four the bottom board? This, BTW, is what it was also showing before I reseated the ram. If so, the ram in question s on a separate board. Opinions, is the ram bad, or the board, or neither? Should I reseat again and flush with contact/tuner cleaner/degreaser? Could this hurt? (it is made to clean electronics) the machine does seem ever so slightly unstable. FCP crashed once in a 5 hour edit, which it has done before but rarely. The machine itself did not crash, just the program. Can using the machine like this do more damage, or will it just not boot? I feel it is a seating or connection issue, as I have never seen ram come and go, once it is fried it's fried. The ram is still pretty pricy, but I was going to buy 4 more gigs just to fill it out. Are the two board that hold the ram identical, top and bottom? If so, is a good diagnostic tool to swap them and see what happens? Move all the ram and swap board positions, or do I risk blowing ram ? Remember, the ram did show up when I reseated, so it seems like it is I damaged. My goal would be to see if top ram stops appearing. Does ram need to be filled in order? I know in pairs, but can I just swap the boards and leave the ram, which should look like filling slots 1,2,5,6,7,8...as opposed to 1,2,3,4,5,6. Can the boards be swapped, or are they set somehow to be 1-4 and 5-8, or is that determined automatically by their upper or lower insertion? Any other advice is appreciated. Funds are low, so I need to keep this machine running. Other info, 3.06ghz (2 quad core) Xeon CPUs, 1tb system drive, 4 TB raid5' OSX 10.6.8 dual graphics display with 512MB (can't remember card model right now). Also, can I update graphic card in this machine? I looked at it a few years ago, but the I for I found was confusing and I never got to it. I figure I might be able to get a better card pretty cheap by now. Thanks all.

You have typed a huge list of ideas all as one paragraph with many questions in it without a single bit of white space. My eyes are not good enough to read a question, attempt to answer it, then dig through the sea of letters to find the next question.
Your writing needs white space, which gives it a peculiar overall shape, and allows a reader with poor eyesight to return to a particular spot in the text. So I will attempt to answer some parts of your query, but will be forced to do so from memory of what you wrote.
The Mac Pro uses Error Correcting Code (ECC) RAM. Eight extra bits are stored with each word, and checked when read back. Single-bit errors are detected, and the check bits are used to make a correction on the fly. More complicated errors are detected, and can cause your Mac to halt on a kernel panic to prevent bad data from propagating.
ECC RAM means your Mac can detect bad memory easily at Startup, and can declare pairs of DIMMs "absent" to avoid using them.
Contact corrosion, which was an issue with much older DIMMs, is rarely an issue with these FBDIMMs. Once re-Inserted ONCE, corrosion will not recur for a year or more.
The upper and lower Riser-cards are identical.
The FBDIMMs in these machines are subject to overheating and death. If Mac OS X or any program reports DIMMs as missing, at least one of the DIMMs in that pair has died (but since they are installed in pairs, both are marked absent).

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

Memory issues - Bring demand paging to X6.

does anyone at nokia remember a few years ago a firmware update that added demand paging to N95 and enabled the phone to do multi-tasking properly without having always memory issues? Please bring it to the X6. It's frustating to run only one app (in this case, opera mobile) and having memory warnings always poping up... After a fresh start of the phone.
In the wise words of a famous Top Gear presenter: how hard can it be?

The numbers below were constantly moving as I copied them so they're not exact but here's what task manager reported. Funny thing is that it always seems to show around 3 GB available.
Physical:
Total - 12581952 Kb
Available - 3377056 Kb
System Cache - 3237124 Kb
Kernel Memory:
Total - 204288 Kb
Paged - 143704 Kb
Non-Paged - 60056 Kb
I just saw that OEM was advising "Increase the size of the SGA by setting the parameter "sga_target" to 10752 M"

Heap Memory Issue in weblogic 9.2 for a JSF 1.1 web application

Hi,
We are running a JSF application (Myfaces, facelets, tomahawk, richfaces & iBATIS) in weblogic 9.2 server on Solaris 10. This application is deployed in production and works fine under normal circumstances. But when there is a heavy user load we are facing a memory issue. The memory usage is gradually increasing and when it reaches to max, Full GC kicks in again & again which choks up all requests. We don't save anything in session scope. All our backing beans are saved in request scope hence they should be garbage collected after each request done, but this is not happening.
We took the heap dump from production after this issue and analyzed it. After my analysis, I found all objects which are set in request object not being garbage collected and the root referers of all these objects is weblogic.servlet.internal.MuxableSocketHTTP.
I reproduced the similar behaviour in one of our development environment using JMeter. I ran 100 concurrent users in JMeter for almost 1 hour and saw the similar behaviour. Below is the result of all weblogic objects which are still hanging in heap after test was over (I also ran manual Garbage Collector from admin server).
1) weblogic.servlet.internal.MuxableSocketHTTP - 1774 objects - retained heap (1 GB)
2) weblogic.servlet.internal.ServletRequestImpl - 1774 objects - retained heap (1 GB)
My understanding is that every request made to weblogic server goes through the MuxableSocketHTTP object which creates the ServletRequestImpl to serve it. Once the request is served these objects are suppose to be removed. As a result of that whatever is saved in your request will still be hanging.
I am not able to understand why these objects are hanging after request is done. Could anybody answer to my question. I appreciate your help in advance.
The GC setting for weblogic server while startup is:
-XX:MaxTenuringThreshold=15 -XX:+PrintTenuringDistribution -XX:+AggressiveHeap -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:PermSize=128m -XX:MaxPermSize=128m -Xms3g -Xmx3g -XX:NewSize=512m -XX:MaxNewSize=1024m
Thanks MaKK

What happened with this issue? We are seeing something similar on WebLogic 9.2 MP1 in Solaris (Jdk 1.5. patch 10. 32 bit). Out of Memory's with thousands if instances of weblogic.socket.MuxableSocket hanging around.
Our thinking was initally the Java heap, then we thought that maybe the sockets weren't being closed properly, possible in WebLogic or in LiveCycle.
Any info would be greatly appreciated.
Snippet of our stack trace:
<16-Feb-2010 04:30:13 o'clock GMT> <Error> <Kernel> <BEA-000802> <ExecuteRequest failed
java.lang.OutOfMemoryError: Java heap space.
java.lang.OutOfMemoryError: Java heap space
>
javax.ejb.EJBException: EJB encountered System Exception: : java.lang.OutOfMemoryError: Java heap space
     at weblogic.ejb.container.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:145)
     at weblogic.ejb.container.internal.BaseLocalObject.postInvokeCleanup(BaseLocalObject.java:550)
     at weblogic.ejb.container.internal.BaseLocalObject.postInvokeCleanup(BaseLocalObject.java:496)
     at com.adobe.idp.um.businesslogic.directoryservices.DirectorySynchronizationManagerBean_f5g74_ELOImpl.synchronizeProviders(DirectorySynchronizationManagerBean_f5g74_ELOImpl.java:267)
Joel

Memory issues AP3 & 10.9.1

I've been using Aperture since version 1.0 and never have I had memory issues until now.
HAs anyone come across issues with AP3 and 10.9.1
"Your system has run out of application memory" ? and shows Aperture in red (paused)?
I have 32GB ram, all SSD's and the ATI 5870 graphics card.
Any thoughts/insight/solutions?
I think I'm on the verge of just dumping Aperture and callling it a day - it's bad enough 10.9.1 is having issues with the finder.

This is a known issue.
It doesn't affect everyone, and for some people is resolved by switching off on-screen proofing.
The work around for the moment is periodic restarts before the system runs out of memory. Hopefully a fix will be along shortly.
Andy

Result Set Causing out of memory issue

Hi,
I am having trouble to fix the memory issue caused by result set.I am using jdk 1.5 and sql server 2000 as the backend. When I try to execute a statement the result set returns minimum of 400,000 records and I have to go through each and every record one by one and put some business logic and update the rows and after updating around 1000 rows my application is going out of memory. Here is the original code:
Statement stmt = con.createStatement();
ResultSet   rs = st.executeQuery("Select * from database tablename where field= 'done'");
            while(rs!=null && rs.next()){
            System.out.println("doing some logic here");
rs.close();
st.close();
I am planning to fix the code in this way:
Statement stmt = con.createStatement(ResultSet.TYPE_FORWARD_ONLY,
                      ResultSet.CONCUR_UPDATABLE);
stmt.setFetchSize(50);
ResultSet   rs = st.executeQuery("Select * from database tablename where field= 'done'");
            while(rs!=null && rs.next()){
            System.out.println("doing some logic here");
rs.close();
st.close();But one of my colleague told me that setFetchSize() method does not work with sql server 2000 driver.
So Please suggest me how to fix this issue. I am sure there will be a way to do this but I am just not aware of it.
Thanks for your help in advance.

Here is the full-fledged code.There is Team Connect and Top Link Api being used. The code is already been developed and its working for 2-3 hours and then it fails.I just have to fix the memory issue. Please suggest me something:
Statement stmt = con.createStatement();
ResultSet   rs = st.executeQuery("Select * from database tablename where field= 'done'");
            while(rs!=null && rs.next()){
             /where vo is the value object obtained from the rs row by row
            if (updateInfo(vo, user)){
                           logger.info("updated : "+ rs.getString("number_string"));
                           projCount++;
rs.close();
st.close();
private boolean updateInfo(CostCenter vo, YNUser tcUser) {
          boolean updated;
          UnitOfWork unitOfWork;
          updated = false;
          unitOfWork = null;
          List projList_m = null;
          try {
               logger.info("Before vo.getId() HERE i AM" + vo.getId());
               unitOfWork = FNClientSessionManager.acquireUnitOfWork(tcUser);
               ExpressionBuilder expressionBuilder = new ExpressionBuilder();
               Expression ex1 = expressionBuilder.get("application")
                         .get("projObjectDefinition").get("uniqueCode").equal(
                                   "TABLE-NAME");
               Expression ex2 = expressionBuilder.get("primaryKey")
                         .equal(vo.getPrimaryKey());// primaryKey;
               Expression finalExpression = ex1.and(ex2);
               ReadAllQuery projectQuery = new ReadAllQuery(FQUtility
                         .classForEntityName("EntryTable"), finalExpression);
               List projList = (List) unitOfWork.executeQuery(projectQuery);
               logger.info("list value1" + projList.size());
               TNProject project_hist = (TNProject) projList.get(0); // primary key
               // value
               logger.info("vo.getId1()" + vo.getId());
               BNDetail detail = project_hist.getDetailForKey("TABLE-NAME");
               project_hist.setNumberString(project_hist.getNumberString());
               project_hist.setName(project_hist.getName());
               String strNumberString = project_hist.getNumberString();
               TNHistory history = FNHistFactory.createHistory(project_hist,
                         "Proj Update");
               history.addDetail("HIST_TABLE-NAME");
               history.setDefaultCategory("HIST_TABLE-NAME");
               BNDetail histDetail = history.getDetailForKey("HIST_TABLE-NAME");
               String strName = project_hist.getName();
               unitOfWork.registerNewObject(histDetail);
               setDetailCCGSHistFields(strNumberString, strName, detail,
                         histDetail);
               logger.info("No Issue");
               TNProject project = (TNProject) projList.get(0);
               project.setName(vo.getName());
               logger.info("vo.getName()" + vo.getName());
               project.setNumberString(vo.getId());
               BNDetail detailObj = project.getDetailForKey("TABLE-NAME"); // required
               setDetailFields(vo, detailObj);//this method gets the value from vo and sets in the detail_up object
               FNClientSessionManager.commit(unitOfWork);
               updated = true;
               unitOfWork.release();
          } catch (Exception e) {
               logger.warn("update: caused exception, "
                         + e.getMessage());
               unitOfWork.release();
          return updated;
     }Now I have tried to change little bit in the code. And I added the following lines:
                    updated = true;
                 FNClientSessionManager.release(unitOfWork);
                 project_hist=null;
                 detail=null;
                 history=null;
                 project=null;
                 detailObj=null;
                    unitOfWork.release();
                    unitOfWork=null;
                 expressionBuilder=null;
                 ex1=null;
                 ex2=null;
                 finalExpression=null;
and also I added the code to request the Garbage collector after every 5th update:
if (updateInfo(vo, user)){
                           logger.info("project update : "+ rs.getString("number_string"));
                           projCount++;
                           //call garbage collector every 5th record update
                           if(projCount%5==0){
                                System.gc();
                                logger.debug("Called Garbage Collectory on "+projCount+"th update");
                      }But now the code wont even update the single record. So please look into the code and suggest me something so that I can stop banging my head against the wall.

Out of memory issues with PSE 8

I am using PSE 8 64 bit on a Dell desktop computer with Intel (R) Core (TM) i7 CPU 920 at 2.67 GHz. with 8 GB of ram. My operating system is Windows 7, 64 bit.
My problem is that I get out of memory or insufficient ram messages in PSE Editor with some PSE tools when my CPU resource utilization reaches 37 to 38%. In other words, even though my computer is telling me I have almost 4 GB of memory left, PSE is saying it does not have enough memory to complete the operation. It looks to me as if PSE is only using 4GB of my 8 GB of Ram. Is this true and what do I need to do to allow PSE to utilize all of my available ram.

Thanks, that does answer what the problem is, but not necessarily a solution. I like working with 8 to 10 pictures (files) in the editor tray at a time. I make whatever changes needed to each and then group 4 or 5 into an 8.5 X 11 collage. Each picture in the collage is a separate layer and each separate picture may multiple layers of its own. I print the collage on 8.5 x 11 photo paper and then put the page in a photo album. I like the pictures in different sizes, orientations and sometimes shapes, so the album and multiple picture options offered in PSE are not much help. My process eats a lot of memory, which I mistakenly thought, my 8 gb of ram would solve.
Anyway, now that I know the limitations, I can adjust the process to avoid the memory issue and hopefully, a future version of Elements will accommodate 64 bit.
Maybe, I am wondering, do I need to look at other programs or am I missing a PSE function that would make my chore easier.

Out of memory Issues

Hi,
Weblogic version is 10.3, DB - Oracle
We have environment like 4 servers One server with Admin server 4 managed servers remaining 3 servers with each server with 4 managed servers.
Each managed server have 2 GB memory.
Connection pools are setup Initial capacity 0 maximum capacity 15
Our applications are developed on Pega, Currently we are getting Out of memory issues. F5 node send alerts like
SEVERITY: Error
Alert(432526): Trap received from ttnny-cse-f5node1: bigipServiceDown -- Bindings: sysUpTimeInstance = 1589988172, bigipNotifyObjMsg = Pool member 172.22.110.45:8002 monitor status down., bigipNotifyObjNode = 172.22.110.45, bigipNotifyObjPort = 8002 (Fri. 02/12/2010 15:01 America/New_York - Sat. 02/13/2010 15:59 America/New_York)
SEVERITY: Error
Alert(432524): Trap received from ttnny-cse-f5node2: bigipServiceDown -- Bindings: sysUpTimeInstance = 1589982333, bigipNotifyObjMsg = Pool member 172.22.110.45:8002 monitor status down., bigipNotifyObjNode = 172.22.110.45, bigipNotifyObjPort = 8002 (Fri. 02/12/2010 14:59 America/New_York - Sat. 02/13/2010 15:59 America/New_York)
SEVERITY: Error
Alert(432527): Trap received from ttnny-cse-f5node1: bigipServiceUp -- Bindings: sysUpTimeInstance = 1589988572, bigipNotifyObjMsg = Pool member 172.22.110.45:8002 monitor status up., bigipNotifyObjNode = 172.22.110.45, bigipNotifyObjPort = 8002 (Fri. 02/12/2010 15:01 America/New_York - Sat. 02/13/2010 15:59 America/New_York)
SEVERITY: Error
Alert(432525): Trap received from ttnny-cse-f5node2: bigipServiceUp -- Bindings: sysUpTimeInstance = 1589982733, bigipNotifyObjMsg = Pool member 172.22.110.45:8002 monitor status up., bigipNotifyObjNode = 172.22.110.45, bigipNotifyObjPort = 8002 (Fri. 02/12/2010 14:59 America/New_York - Sat. 02/13/2010 15:59 America/New_York)
When we checked at that time server is up and running with some pega exceptions JVM Shows 10 % after some it will go 30 % .
Can you see below alert confirms JVM down so we are restarting the server at this point.
SEVERITY: Alert
Alert(432565): Threshold triggered -- ttappapp01's 8003's Port Availability: 0.00 Percent < 100 Percent averaged over 1.00 minutes (Fri. 02/12/2010 17:15 America/New_York - Fri. 02/12/2010 17:15 America/New_York)
SEVERITY: Alert
Alert(432564): Threshold triggered -- ttappapp01's 8003's Port Availability: 0.00 Percent != 100 Percent averaged over 1.00 minutes (Fri. 02/12/2010 17:15 America/New_York - Fri. 02/12/2010 17:15 America/New_York)
We took thread dump and heap dump at that time can any one please give some suggestions. why server going out of memory.
*1, Any issue with connection pools*
*2, Please give suggestion on design.*
Thanks,
Raj.

Hi Raj,
Did you checked the system.out and Weblogic managed server logs?
Also you have to check the GC logs, to see if there is a memory problem or not.

Lightroom 3.2 out of memory issues

I had been using the beta version of Lightroom 3 without issues. Once I installed the shipping version I get out of memory messages all the time. First I noticed this when I went to export some images. I can get this message when I export just one image or part way though a set of images ( this weekend it made it though 4 of 30 images before it died ). If I restart Lightroom it's a hit or miss if I can proceed or not. I've even tried restarting the box and only having Lightroom running and still get the out of memory issue.
I've also had problems printing. I go to print an image and it looks like it will print but nothing does. This does not generate an error message it just doesn't do anything. So far restarting Lightroom seems to fix this problem.
When in the develop module and click on an image to see it 1:1 at times the image is out of focus. If I click on another image and then go back to the original it might be in focus.
I have no idea if any of this is related but I thought I'd throw it out there. I've been using Lighroom since version 1.0 and have had very good luck with the program. It is getting very frustrating trying to get anything done. I search though the forum but the memory issues I found were with older versions. I'd be very grateful if anyone could point me in the right direction.
Ken
System:
i7 860
4g memory
XP SP3

Hi,
You can get the HeapDump Analyzer for analyzing IBM AIX heapdumps from the below mentioned link.
http://www.alphaworks.ibm.com/tech/heapanalyzer
http://www-1.ibm.com/support/docview.wss?uid=swg21190608
Prerequistes for obtaining a heapdump:
1.You have to add -XX:+HeapDumpOnOutOfMemoryError to the java options of the server (see note 710146,1053604) to get a heap dump on its occurance, automatically.
2.You can also generate heapdumps on request :
Add -XX:+HeapDumpOnCtrlBreak to the java options of the server
(see note 710146).
Send signal SIGQUIT to the jlaunch process representing the
server e.g. using kill -3 <jlaunch pid> (see note 710154).
The heap dump will be written to output file java_pid<pid>.hprof.<millitime> in:
/usr/sap/<SID>/<instance>/j2ee/cluster/server<N> directory.
Both these parameters can be set together too to get the benefit of both the approaches.
Regards,
Sandeep.
Edited by: Sandeep Sehgal on Mar 25, 2008 6:51 PM

IPad 1 and memory issues

I mean this thing is slooowwww. Many apps crash back to the home screen. I have an app called System and it is showing Wired: 59MB at 36.56% What is this? Apps that are automatically on my iPad? Active shows 2MB at 13.90% and I have nothing running except this app. The reason I am bringing all this up is I was wondering is there any way to speed this iPad up? I mean the memory is atrocious! This thing is slow. And it is a brand new one that I got from the Apple store. Granted, it is not an iPad 2, as I do not have unlimited wealth, as Apple assumes we all do, it is the iPad 1. Maybe the memory issue is having too many apps downloaded? I have absolutely nothing running in the background as I close every app I open because the iPad is so slow and crashes even default email back to the home screen at times! I just want to make this thing faster like the day I first got it. Right now, it is serving as a paper weight as I can't keep anything running for very long. Things run smoothly, yes, but many things do not. Still wondering what this Wired section is, as it is taking up so much of my memory. I have only 88MB free and as soon as I open any app, that diminishes rather quickly.

No it's not jailbroken. I will never do that to any of my devices. I am talking about memory. I have plenty of storage. Just tired of apps crashing back to the home screen.

System memory issue

Similar Messages

Maybe you are looking for