System Message 06-152 not working

I've created the PR for 100 units and also PO for 100 units referring the same PR.
After creation of PO, i came to change PR and try to delete the PR..
Even thoush i've set the message
Appln Area: 06
Message# 152  ...as Error message..
System is considering only as Warning... instead of Error message..
please let me know.. what is the problem..

check if it the same message id u r looking for.. in standard, u will directly get the message if the condition is satisfied..
for user autorizationsd chk the below link..
http://help.sap.com/saphelp_bw21c/helpdata/en/5c/deaa74d3d411d3970a0000e82de14a/content.htm
reward if helpful..
regards,
srib

Similar Messages

  • Text messages ringtones are not working in the Storm Two

    Device:  Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
    Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc.  On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One.  On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
    So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
    Vernon

    Hi Jain....
    Field separator is for separating the fields.That means it will effect every field in the node.
    But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
    according to ur scenario if u use data.endseparator 'nl',output will come like this
    2008/0701$101
    2008/0701$102
    2008/0701$103
    2008/0702$105
    if u want new line for every field try to insert a separate node for second field.That means
    MT_DATATYPE:
    Data -
    1:UnBounded
    . .OrderDate----
    1:1
       <Data2>                   1:1
    . ....OrderNo -
    1:1
    now give data.endseparator  'nl'
                data2.endseparator 'nl'
    if possible try like this....
    Sreedhar Goud L

  • Why is my text messaging app is not working at all, is a blank screen? Help!!!

    My text messaging app is not working at all is a blank screen when I open it! Help!!!

    Abdussalam.A,
    you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • My text messaging app is not working PLEASE HELP!!!

    My text messaging app is not working at all is a blank screen when I open it! Help!!!

    No its a well known bug with iphones caused by their over complication of things and their complacency that their users will buy the phones on looks alone irrespective of its basic functionality.
    Suggestion 1 - The most common suggested solution seems to be: iMessage needs switched off on all your devices and switched back on after a rest. I found that this did NOT work.
    Suggestion 2 - Having a Wi Fi Signal seems to confuse iMessage to send an SMS as a text or as an iMessage. Turn off WiFi on your phone and manually send as text message. Slow, I lnow!!
    Suggestion 3 - Move away from any wifi source ie out of range.
    Suggestion 4 - Send an email, or a letter. Its more personal!!
    20 Minutes later - still not sent 2 short texts.
    Apple are very complacent and disdainful of their user community. Not what Id expect but this is a global corporation with the same business ethics as an Oil company or a car company. Profit not function.

  • HT201412 Message tones is not working sometimes

    1.My iPhone 5 message tones is not working sometimes suddenly, have to restart device or eventhought sometimes is not working too after restart my device. I have to reset my iPhone n restore again .
    2.Restore with iOS is not as good as last time coz I can't get back all my iOS photo stream photos n all the photo in my albums too. This is ***** n takes few days also not complete download all of my photos.
    3.some of my iPhone apps will suddenly not respond or will log out to home screen suddenly . Have to open the apps few times only its working as normal .

    Hi,
    I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
    Regards,
    Klaus

  • Message.saver is not working under 10.6 - anybody know of an alternative?

    Message.saver 1.5.2 (http://www.apple.com/downloads/macosx/icons_screensavers/message.html ) is not working under 10.6. It is a screensaver that allows you to put a text on the screen as the saver kicks in. IMHO a excellent piece of software that worked fine under 10.5 but not under 10.6.
    Does anybody know if there is something like it? and that works under 10.6?
    Thanks.

    Hi
    i have the same messages on 10.6.4 and with the sonic xx170:
    28.06.10 11:39:04 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
    28.06.10 11:39:07 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
    28.06.10 11:39:08 racoon[489] IKE Packet: receive success. (Information message).
    28.06.10 11:39:10 pppd[488] IPSec connection failed
    28.06.10 11:39:10 racoon[489] IKE Packet: transmit success. (Information message).
    28.06.10 11:39:10 racoon[489] IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).
    any ideas?
    waiting on 10.6.5, 10.6.6 ....?
    regards, Arthur

  • Everytime i close firefox, i get an error message about quicktime not working. 6 times.

    browsing normally, close firefox, i get an error message about quicktime not working. i click ok. then another comes up. i click ok. 6 times total this error message comes up, every time i close firefox. really annoying.

    If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
    *Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
    *Install the new version that you have downloaded
    * http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can also try to repair the disk permissions:
    *http://thexlab.com/faqs/repairprocess.html

  • Yahoo mail message editor is not working in Firefox 3.6.9

    Hi
    Yahoo! main message editor is not working in latest firefox release 3.6.9
    I am unable to type any text in message body.

    Try changing privacy.clearonshutdown.history to false

  • My message sounds are not working, and my game sounds... But my video sounds are. Not sure what to do?

    My message sounds are not working, or my game sounds...but my video is?

    Never mind. I fixed it. Silent switch was stuck

  • I have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

    i have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

    You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
    this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
    http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

  • Flash player 11.0.1.152 not working on all sites. Using Mac OS 10.5.8

    What am I missing?  Flash didn't work properly on previous version either.  I use google chrome primarily but flash does not work on all sites using Firefox or Safari either.  I have a Macbook Pro operating on 10.5.8.  I'm sure it's probably a simple fix but I just haven't found it.  Appreciate any help on the matter. 

    I have spent countless hours trying to get my flash player working and have tried EVERY kind of possible answer through many forums and websites to solve this. Does adobe have anything currently that will solve this flash player problem?? I have the lastest version of Safari 5.1.1. and I have the lastest version of adobe flash player 11.0.1.152, I have even tried the debugging installs adobe put out for flash player. I have tried the "working around lion flash player video thing" where you try private browsing. I have tried going into system preferences and entering into the flash player settings in the storage tab the allow this sites, etc. NOTHING HAS WORKED!! I still get my local storage pop up message whenever I try and watch a you tube or any site that has flash video on it, that flash player settings box still pops up and is stuck on my screen and I cant click allow or deny or get it off. So many people I have read have the same problem and I only the same answers pop up that I have tried again and again, does anyone have a real resolve to this yet??? PLEASE PLEASE PLEASE HELP.

  • After full system update ppp does not work anymore

    Well, I have this problem:
    1) I install Arch Linux from the latest Core
    2) I manually install the latest versions of wvdial and its dependences (xplc and wvstreams). This is an offline installation (because I can't set up internet without wvdial. So I save these packages on USB drive, and there I lanch pacman -U *.pkg.tar.gz)
    3) I set up my GPRS internet connection (I use a mobile phone)
    Everything works well (i.e.: I can ping google without problem).
    Problems arise if I decide to update my system. In this case, indeed, after updating and rebooting, my connection doesn't work no more. Everything works fine until I update. After update, I can say hello to my ppp.
    Then, I add some some details.
    These are the last lines of messages.log after a successful connection (i.e.: before the full update of my system)
    pl2303 4-2:1.0: pl2303 converter detected
    usb 4.2: pl2303 now attached to ttyUSB0
    usbcore: registered new interface driver pl2303
    pl2303: prolific pl2303 USB to serial adaptor driver
    PPP generic driver version 2.4.2
    NET: registered protocol family 10
    lo: disabled privacy extensions
    pppd 2.4.5 started by root, uid 0
    using interface ppp0
    connect ppp <-> /dev/ttyUSB0
    PAP authenticate suceed
    PPP BSD compression module registered
    PPP deflate compression module registered
    local IP address ...
    remote ID address ...
    primary DNS address ...
    secondary DNS address ...
    The last lines of messages.log after the update are:
    pl2303 4-2:1.0: pl2303 converter detected
    usb 4.2: pl2303 now attached to ttyUSB0
    usbcore: registered new interface driver pl2303
    pl2303: prolific pl2303 USB to serial adaptor driver
    PPP generic driver version 2.4.2
    NET: registered protocol family 10
    lo: disabled privacy extensions
    pppd 2.4.5 started by root, uid 0
    As you can see, it's seems there are problems in "using ppp0 interface". Indeed, pppd starts, but ppp0 interface not. I can also add that ifconfig ppp0 up and similar commands do not work (ppp0: no such device, or something like that).
    So, what can I do?

    I don't use ppp so this is just a guess.  However, after a recent upgrade I saw a message from pacman:
    [2010-02-14 09:07] >>> The kernel-mode plugin has a new place.
    [2010-02-14 09:07] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
    [2010-02-14 09:07] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
    [2010-02-14 09:07] upgraded rp-pppoe (3.10-2 -> 3.10-4)
    Could this be the problem?
    Last edited by loafer (2010-02-23 20:01:29)

  • Messages on Mac not working?

    My messages will not work on my Macbook Pro I seem to have the same problem with my Facetime, this message keeps appearing everytime I try to sign in telling me to contact apple and do this imessage registriation and provide them with a validation code it gives me.But when I called they wouldn't help unless I paid 20 bucks? Someone please help!   P.S I am running on Mavericks

    Hi,
    Have not seen that for a while.
    It was seen early in Mountain Lion and Messages 7.0 but seemed to be resolved with the OS X 10.8.2 update that updated Messages to 7.0.1
    I am not aware that anyone reported being charged before but I also know of no other way to resolve it.
    As A first step though I would go to the Apple Menu > About this Mac.
    Click twice on the line that states the OS level
    This will change to the Build Number (And alternative OS version counting system) and then to the Serial Number.
    If the Serial Number is missing you will need to visit an Apple Store or an Apple Authorised Service Provider (AASP) and have it added to the Logic/mother board.
    Sometimes during repair or refurbishment people forget tot "Flash" the board with the Serial Number.
    This was what was added to the OS X 10.8.2 updated to Messages.
    If one appears to be present compare it to the label on the back of the machine.
    10:08 pm      Tuesday; December 31, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for