System messages ( Change Warnig message to Error message )

Hi!!!
Convert Warnings message to error message
User  create a purchase requisition and a purchase order is generated from  it. Afterwards, you change the purchase requisition by setting   the deletion indicator. The system generates a warning message that a purchase order already exists for this purchase requisition. However, the deletion of such a purchase requisition should be prevented. Therefore, the system should generate the warning message 06152.
I followed the below path
SPRO/MM/Purchasing/Environment Data/Define Attributes of System Messages
select System messages
*I did not find the Message number 152*
Help me out to fix this issue
I am following this OSS Note 521174 - ME52N: Deletion of a PReq despite PO
Regards
Shamulheq

Hi!! chakrapani,
Thank you
I made the changes by following below path
SPRO>MM/>Purchasing>Environment Data>Define Attributes of System Messages
go to "New entries" enter application as 06 and at message no filed, click F4. you will find the required message
I tried to change the Purchase Requisition  for which Purchase order Is created ,system will not allow to delete
The message is shown in  yellow but not in red ( purchase orders already exist )
Can you help me show the ERROR message in red
Your feedback can help me to fix this issue
regards
Shamulheq

Similar Messages

  • Changing System warnig msg to Error Message

    Hi,
    how to change ME393 " No shipping data could be found for item & "  system message from 'W'  warning to 'E'   error.
    i have checked using OLME,OMT4 tcode but not finding this message number.
    also i checked SPRO IMG.
    but could not found it ?
    what is right way to Find  ME 393 system message
    This message is in ME21N.

    FOLLOW THIS :
    SPRO>SAP REFERENCE IMG>MATERIAL MANAGEMENT>PURCHASING>Environment data-->SYSTEM MESSAGE
    Change the message type.
    Hope this resolves the issue.
    SPRO>SAP REFERENCE IMG>MATERIAL MANAGEMENT>PURCHASING>MESSAGE.
    Check under this catagory also.
    Regards,
    Gurpreet
    Edited by: Gurpreet Singh on Feb 19, 2009 2:34 PM

  • HT201262 cannot go to cmd+V or S, I cannot change my password. -error message ===boot file path system library coreservices boot.efi.... Please help.

    cannot go to cmd+V or S, I cannot change my password. -error message ===boot file path system library coreservices boot.efi.... Please help.

    Got it thanks macjack . Command + S on restart.
    In this case Nad69-Breizh did you try restarting with the option key down and re-selecting the boot drive.
    If no Recovery option,  try command option R  for internet recovery. Takes some time to load up.

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • System messages error

    hello all,
    i'm using SAP Portal 7.31. I just want to create a system message to all portal users. but it falied and i got the following error:
      404   Not Found
      SAP NetWeaver Application Server 
      Error: Request cannot be processed.
      SAP Technology Troubleshooting Guide
      Details: Requested resource [/SystemMessages] is not found.
    The link which i used was: http://<server>:<port>/devinf/main. Could someone telle me how to resolve that problem? thx.
    best regards,
    Fanglin

    Do you get the message as error when you trying to change the PO online using standard SAP transaction? Did you configure the messages with different versions? If so, you may need to update your user profile with the parameter ID MSV with the version. Version will control the same message to be error message for one user and warning for another.

  • Bapi_po_change system messages - error or warning control

    hi,
    I have a problem regarding the control of the W/E attribute in purchasing system messages.
    I've changed the message category from E to W in customizing,
    MM->purchasing->environment data->define attribute of system messages.
    for example, i've changed message 088 in APP area 06 to W.
    when i execute the bapi i still get an error for this message.
    thanks,
    Oren.

    Do you get the message as error when you trying to change the PO online using standard SAP transaction? Did you configure the messages with different versions? If so, you may need to update your user profile with the parameter ID MSV with the version. Version will control the same message to be error message for one user and warning for another.

  • How to change the category of system messages in PS

    Hi All,
    Is it possible to change the category (i.e from information to warning/error) of the system messages like CN707 in PS? If yes how?

    Hi,
    You will have to go for development. Use userexit CNEX0009.
    Refer similar thread:Re: CN707, SE721
    Regards
    Edited by: Shrikant Rakate on Jan 14, 2009 4:57 PM
    Edited by: Shrikant Rakate on Jan 14, 2009 4:58 PM
    Edited by: Shrikant Rakate on Jan 15, 2009 12:37 PM
    Edited by: Shrikant Rakate on Jan 15, 2009 12:38 PM

  • Is it possible to change the sytem defined Error Message

    Hi All,
    Is it possible to change the sytem defined Error Message: "Reason codes with automatic charge-off are not permitted here" to Warning Message. If so, how can I search in which application area  this message defined in OBA5 screen?
    Other details for this issue:
    Message: Reason codes with automatic charge-off are not permitted here
    Message Class: F5,
    Message No: 605.
    Thanks
    Chandra

    Hi,
    Without investigating deeper for this specific error message, I can say that the messages that cannot be maintained through OBA5 will in some cases remain in the system even if maintained in OBMSG. If message is not allowed for change in OBA5 and there is no OSS note regarding this message, it means that SAP designed it this way. Changing the nature in OBMSG (which is not standard or recommended SAP operation) will not always save the problem; the message could be simply hard-coded in the program with 'E' attribute.
    Regards,
    Eli

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • Error in local message system; message 009999000035 not complete

    Hello All.
    I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
    SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
    and SAP_SV_FDB_NOTIF_BC_CREATE.
    However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
    I have also checked for Product_ID parameter which is not existing.
    One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
    So, this shows clearly that it is an issue with role/authorization.
    Please suggest me !!
    Thanks in advance.
    Regards,
    Satish.

    Hmm not really. Profiles for the roles are also generated?
    Those roles/profiles should be sufficient to create support messages.
    Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
    When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
    The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
    Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04?

  • Error in local system;message is not complete--- in Solman 4.0

    Hello Solman Gurus,
             After importing SP 13 in Solution Manager 4.0 , whenever i am trying from help--> create support message ; i am getting "ERROR IN LOCAL SYSTEM; MESSAGE <MSG NO> IS NOT COMPLETE "
    i have seen these threads
    ERROR when Trying to create support message in satellite system
    ERROR when Trying to Create Support Message in Satillite system
    create support message
    but they are saying about Satelliate system not solman
    Please help if you could
    regards
    Naveen

    Naveen,
      Check if the UserId that is creating the message in SolMan via Help->Create Support Message has roles SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN (the profiles of the roles must be generated, all the authorization objects should be green).
      I have SolMan 4.0 SP 13 too, when I delete these authorizations from my userid, I have the same error.
    Let me know if you still have the error.
    Regards,
    Raquel.

  • How to change the language of administrator system message in outlook

    I wonder where is the option which changes the language of the text
    related
    to : Your mailbox is over its size limit send by the system
    administrator ?
    Some mailboxes get this message in French and other in
    English ?
    Is anyone can help me ?
    I work with French Outlook 2003 sp2 and
    English Exchange server 2000 sp3
    I try to change the regional setting on the
    server but nothing has changed.
    Thanks,

    Hi,
    Please refer to this duplicate thread below:
    http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Error in assigning the system message

    Hi ,
    I am trying to assign a std message no from the std message class in the table V_160M.
    Appl are: IW
    Message no :187
    system is giving an error  " please specify a legal value"
    Msg number : CZ125
    Is it possible to assign any std system message in the message control table?
    DP

    DP,
    You can use this table only for certain message numbers defined by SAP,You cannot use this for any other message numbers.
    Regards
    Narasimhan

  • Error in local message system ( message no BCOS03O

    MY GURUS
    I AM NEW TO SAP AND SOLUTION MANAGER
    AM HAVING ISSUES CREATING MESSAGES FROM MY SATELLITE SYSTEM TO SOLUTION MANAGER I GET THIS ERROR MEAASGE = Error in local message system ( message no BCOS03O

    Hi
    This error occurs if you are not maintaining the BCOS_CUST table entry in your satellite system which comprises of back RFC to solution manager.
    if other settings like master data or BP creation done in solman this will resolve ur problem
    have  you done the required settings in solution manager for service desk setup.
    But in case if you have done any setup for service desk please visit below HOW TO guide
    https://websmp109.sap-ag.de/~sapdownload/011000358700000776062009E/Howto_ServiceDesk.pdf
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Jun 10, 2011 10:32 AM

  • Error in local message system; message 008899000001 not complete, Message n

    Hello All,
    While configuring Solman Service Desk, after configuring basis configuration. I am getting following error while creating ticket from satellite system.
    Error in local message system; message 008899000001 not complete
    Message no. BCOS030
    Thanks,
    Piyush

    Hi,
    There were few threads in the past with the same issue, check [this one|ERROR when Trying to Create Support Message in Satillite system;.
    Also [this thread|create support message;.
    Regards
    Naveen

Maybe you are looking for

  • GR/IR Account is not being credited with po net price

    Hi Experts, While posting Goos Receipt ,GR/IR amount is not equal to PO net price.MRP indicator is on in excise tab, If MRP indicator is on then GR/IR value decreases as comparitively PO net price. But this GR/IR value is so low than PO net price. I

  • Identifying Execute Threads as Socket Readers

    Hi All, Preface: I am trying to identify at any given instance the percentage of socket reader threads that are in use - this will help me to identify when all threads are in use and unable to service user requests. Thus my goal is to identify thread

  • What is the "deal" wit these points?

    10% off a service, store or restaurant? What an insult! i can do better with a coupon or Groupon.

  • Input enabled column to enter text in query

    Hi All, I need to create a query which has an input enabled column where user can enter text up to 250 characters. Is this possible only using aggregation level? Is it possible to declare a characteristic to show up as a column and input enabled? I a

  • Sync help requiered!!

    If I don't sync my iPod for 3-4 weeks, and the next time i connect it to iTunes, it requieres all the songs and movies to be deleted and re-synced. Why?