System migration

I have three Power Mac's connnected to a Raid thru FibreChannel/PCI cards all with Xsan 1.1. The Mac OS versions are as follows
Meta Controller: 10.4.6/dual 2 ghz powerpc G5/512 mb
Edit 1: 10.4.11/dual 2.5 ghz power pc G5/8 Gb
Edit 2: 10.4.11/4x2.5ghz powerpc G5/12 Gb
I need to go to Mac Version 10.5.6 in order to upgrade to Motion 4. If I do this, will my PCI cards/Xsan 1.1 be adversely affected? Also, since i haven't upgraded this system in a while, what can I update to optimize performance?
Thanks

"can i move the operating system from the old drive to the new with out having to do the installation from scratch?"
Yes. Use Carbon Copy Cloner or SuperDuper to clone the old drive to the new one.

Similar Messages

System Migration Assistent - Migrating Vista-- Windows 7

T61 + Vista
When I receive Windows 7, can the ThinkVantage System Migration Assistant move current Vista settings to Windows 7 or does the utility only work within the same OS?
Thanks,
Mark
Moderator Note; edited subject for relevancy
Message Edited by andyP on 07-15-2009 09:45 PM

Yes Mark, It should be able to. I see why no reason why it shouldn't work.
Moderator Note; edited subject for relevancy
Message Edited by andyP on 07-15-2009 09:46 PM
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

System Migration Check up

Hi Friends,
We have planned to migrated our Production systems to a different hardware. Operating system and Database remains the same. Does SAP provides any Check on the system after this homogenous system migration ?
Thanks in advance.
Regards,
Vimal

Hi,
If you have got Enterprise Support from SAP, you are eligible to get some feedback on the migration process and post migration tuning. For this you may need to raise an OSS message to SAP support.
Hope this helps.
Regards,
Deepak Kori

Reconfiguring CHARM after System Migration

Hi,
We are going to migrate our existing Solman system to another system using system refresh, we have implemented CHARM which takes care of the Transport for our ECC and Portal Systems, my question is what needs to be done in the newly migrated system after the system refresh and what changes we need to make in our ECC System in order for CHARM to work in the newly migrated system.
Our landscape info
We have DEV,QA and Prod in our existing landscape with charm is configured in the Solman. Our Prod is the main domain controller and solman is the secondary domain controller, can some one explain me what needs to be done in the configuration after the system migration.
Sathish

Hi,
Only hostname/ipaddress and SID name will be changed for solution manager. So for solution manager back RFC in ECC and EP systems you need to change hostname/ipaddress and instance number.
From SMSY try to update/read ECC and EP systems data. Check it is working fine or not.
Suman

System Migration Assistant

I have previously used SMA to migrate settings to new lenovo laptops, it it still available and if so where can i find it? I have to migrate some users to new lenovo thinkpad Edge Win 7 machines.
Solved!
Go to Solution.

System Migration Assistant (SMA) was withdrawn at the end of 2013. See http://support.lenovo.com/en_US/detail.page?DocID=HT080684
Looks like the support website hasn't been totally cleaned up and still has an old version. I don't recommend using it.

System Migration - Snow Leopard

I have a Mac Pro and iMac, both running Snow Leopard. I want to use System Migration to transfer my Mac Pro Data over to my iMac. I was planning to do a reformat of the iMac drive and do a fresh install of Snow Leopard. It appears my Snow Leopard disc is bad. The original Leopard disc that came with the iMac works and would allow me to do a fresh install of Leopard.
Could I then do a migration using firewire, setting the Mac Pro (Snow Leopard) as the source and the iMac with the fresh install of Leopard as the target? Would this allow me to move Snow Leopard and all my applications over to the iMac? I did the exact opposite when I bought the Mac Pro and things went perfectly, but they both were running Snow Leopard.
Would I need to deauthorize the iMac from iTunes before I do this and does that mean I have to be connected to the internet during the deauthorization?
Thanks

Setting-up a new Mac from an old one, its backups, or a PC

System Migration Agent

Hi,
I updated recently with system update and shortly after the system migration agent box started having a canary. At random albeit regular (2 out of three times) when I click on a desktop icon or try to perform a funtion like delete on an item the system migration box appears and starts having a coronary. Is there anybody with a fix for this.
Thanksing you in advance for your help.
Solved!
Go to Solution.

Removed the system migration agent. It seems the last update of thinkw vantage software has corrupted a couple fo its component parts and I have had to remove them.

System Migration HELP!!! anyone? anyone?

So i have a g4 tower running 10.4.xx and i want to use system migration to pull all the info onto my new macbook pro running leopard. not a problem normally but the firewire ports on my G4 are dead! so i can't boot and hook it up in target mode.
Is there an easy way to still use system migration without firewire? i was thinking share the whole drive on the G4 mount it on the desktop of my new system and run system migration and select the mounted drive. would this work?
anyone with info would rock and i will thank you forever.. ok maybe just thank you but i will totally appreciate it!
cheers,
jess

Migration from a G4 to a MacBook Pro requires careful considartion. Many doing such a migration have difficulty with the Migration Assistant. See this user tip:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
As for repairing your Firewire ports, make sure you have a current clock battery. That's a simple 3.6V 1/2 AA battery from Radio Shack, catalog item 23-026. That may fix it. If it doesn't you can sometimes take a can of compressed air to the ports themselves. If that doesn't work, do as scb suggests. Make sure they are 6 pin firewire, and not 4 pin.
http://www.xlr8yourmac.com/ should list some Firewire PCI cards which support Target Disk Mode. Google is your friend!

System Migration Assistant select a profile

I am using the ThinkVantage System Migration Assistant 6.0 to migrate my data from my old lenovo laptop to a new lenovo laptop. On the Current Laptop (Laptop being used) I am able to select what profile I want to transfer. However on the Target Laptop (New Laptop) I am not able to select what profile to transfer the data to. Is there anyway to select what profile I can transfer the data to on the new laptop?

Hi
Welcome To Lenovo Community
You may also refer below link which will guide you through the deployment
http://support.lenovo.com/en_US/product-and-parts/detail.page?LegacyDocID=MIGR-73571
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-50889
Hope This Helps
Cheers!!!

Could anybody advise the general procedure for SAP system migration?

I may have chance to be involved into a SAP system migration. Generlly speaking, there are several SAP instances will be migrated into 1 box.The existing instances are 4.6C, and the target instance is ECC6.
Could anybody provide me some reference material for SAP system migration? or Is there any tools or software can facilitate the migration?
Thank you so much!
null

We are currently running and upgrade from 46C to ECC6 and I have found the following very usefull:
<a href="https://websmp108.sap-ag.de/upgrade-erp">Upgrade Guides</a>
SAP Notes:
Note 825146 - Add. info. on upgrading to SAP NW04s (SR1, SR2) MSSQL
Note 913971 - Add. info. on upgrading to SAP ERP Central Component 6.0 SR
Note 813658 - Repairs for upgrades to products based on SAP NW 2004s AS
Hope this helps!!
Phil
Message was edited by:
Phil Wade

X61 since last update: System Migration Manager comes up with right click...

Hi there,
since my last update with the Lenovo-Tool "System-Update" - everytime I do a "right button click" on my mouse, the System Migration Manager is coming up. Uhh - this makes me nervous. Any ideas to help me?
Bernd

Hello & welcome!
No worries, you did great for a 1st post, & this is generally a friendly place.
It sounds light it's the Mouse button from here, to test it...
Go to System Preferences > Mouse, change the Primary button to the Right button... does the Right button ever do that now as the left button?

Time machine after system migration

Recently my iMac (running 10.5.8) was stolen. Bought a new laptop (running 10.6) and restored my system from Time Machine. Worked perfectly! Problems started when I wanted to continue the backups from the new computer. First time I tried it after 7 hours it was stuck at 12% (when system restore took 2-3 hours). Other times I tried it it got stuck at the stage of "calculating changes". I tried changing the name of the computer to start a completely new set of backups. That didn't work either. I'm thinking of erasing the external drive (Iomega 1.5T, out of which 1.25 T is free) and starting over again. Any suggestions? How can I force Time Machine to start a new set of backups and leave the old ones alone?
PS1. How can I delete an *inProgress file? Standard delete doesn't work
PS2. Latest Time Machine Buddy output:
Starting standard backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Detected system migration from: /Volumes/Time Machine Backups/Backups.backupdb/trane/2009-09-20-224854/Macintosh HD
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
Message was edited by: Themis

OK, I got a new drive and started anew. I have about 250GB to copy. Although it starts very well (about 1 GB/min) after a few hours it becomes so slow that it's unworkable. After six hours it's stuck at 214.73 GB. This being the case, I will have to stop using Time Machine. I'll just occasionally copy the folders I need.
Here's TM buddy output:
Starting standard backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
Detected system migration from: /Volumes/Time Machine Backups/Backups.backupdb/trane/2009-09-20-224854/Macintosh HD
Backup content size: 249.4 GB excluded items size: 15.0 GB for volume Macintosh HD
No pre-backup thinning needed: 281.30 GB requested (including padding), 930.58 GB available
Waiting for index to be ready (101)
Copied 57.6 GB of 234.4 GB, 197939 of 4396098 items
Error: (-8084) SrcErr:YES Copying /Users/.../Library/Mail/SearchHistory.plist to (null)
Copied 123.2 GB of 234.4 GB, 557306 of 4396098 items
Copied 173.7 GB of 234.4 GB, 1051457 of 4396098 items
Copied 197.8 GB of 234.4 GB, 1464207 of 4396098 items
Copied 199.7 GB of 234.4 GB, 1559383 of 4396098 items
OK, I may have a large number of small files, but why should that be a problem? And why do I have this problem on the laptop when TM worked fine on my old iMac? Does the detection of system migration make a difference?

Will the System Migration Assistant Migrate all of my Passwords?

Hello,
I need to Migrate all of my password from my Lenovo X301 to my new Lenovo X1. Will the System Migration Assistant do this?
Thanks.

are you using thinkvantage password manager, if you are open TVPWM use the import/export to backup your passwords, copy to USB
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Security problem: Could someone have used system migration without my Knowledge?e

I found a log file on my Mac that was marked SystemMigration.log, which seemed to indicate that a system migration had been carried out. I understand that the system migration tool is used to transfer information between Macs, but I only have one machine and to my certain knowledge I have never carried out a system migration. My Mac has been hacked in the past and I'm suspicious that someone might be using it remotely. Is this possible and if so what can I do about it?

September 17, 2012, Linc. It opens with 'Starting System Migration' at 17.55 and the first line says 'Disabling Time Machine during migration' and runs through various actions like ' Found disk (diskIdentifier=disk3, mountpoint=(null), isInternal=1, filesystem=(null))' and 'External Volume Appeared : [/Volumes/iWork '09 Install DVD] (W_NOT_SCANNED) (IS_Internal) (IS_Mountable) (Mounted) (disk3s3)'.
It ends at 22.15 with the message'Restoring Time Machine setup'

IPods won't mount since system migration

I recently did a system migration using the migration assistant from my old 24" imac to a new 27" imac, both running the latest version of Snow Leopard. I have two ipod touches and neither one will now mount on the new mac. They don't show up in iTunes or in disk utility. They mounted on the old one so I know the issue is with the mac itself.
They appear to receive power from the connector but cannot communicate with the mac. Other peripherals work on the same port.
Any suggestions?

Hello bercg,
I'm sure you tried plugging them into different USB ports and using different USB cables? Have you tried resetting either iPod with it connected to your iMac?
Otherwise, work through each troubleshooting procedure described in this Apple support document as necessary.
http://support.apple.com/kb/TS1591?viewlocale=en_US
B-rock

Slow urxvt launching after system migration

Hi everyone!
I've just migrated my arch system to a new computer (I kept my home partition and backed up pacman's cache and /etc as well as a list of packages installed). I manually installed the main packages needed to set up my system, I didn't re install secondary software yet. However I'm having trouble with urxvt, it takes a few seconds to launch whereas before the migration it would just inmediatly appear. I'm using my old .bashrc and .Xresources, so the configuration is the same as before, also Xterm for example has no problem so it appears to be no problem with .bashrc... Based on what I've read it could be due to font loading, however I have no idea what my previous font configuration actually means:
URxvt.font: -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso8859-1
URxvt.boldFont: -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso8859-1
I must have copied that from some example or something and I don't know what it actually does...
Nevertheless, if I comment that out from .Xresources, it changes the font used, but it still takes a few seconds to load...
Anyway, any help is apreciatted, just for reference my .bashrc and .Xresources:
# /etc/bash.bashrc
# https://wiki.archlinux.org/index.php/Color_Bash_Prompt
# This file is sourced by all *interactive* bash shells on startup,
# including some apparently interactive shells such as scp and rcp
# that can't tolerate any output. So make sure this doesn't display
# anything or bad things will happen !
# Test for an interactive shell. There is no need to set anything
# past this point for scp and rcp, and it's important to refrain from
# outputting anything in those cases.
# If not running interactively, don't do anything!
[[ $- != *i* ]] && return
# Bash won't get SIGWINCH if another process is in the foreground.
# Enable checkwinsize so that bash will check the terminal size when
# it regains control.
# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
shopt -s checkwinsize
# Enable history appending instead of overwriting.
shopt -s histappend
case ${TERM} in
xterm*|rxvt*|Eterm|aterm|kterm|gnome*)
PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
screen)
PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
esac
# fortune is a simple program that displays a pseudorandom message
# from a database of quotations at logon and/or logout.
# If you wish to use it, please install "fortune-mod" from the
# official repositories, then uncomment the following line:
# [[ "$PS1" ]] && /usr/bin/fortune
# Set colorful PS1 only on colorful terminals.
# dircolors --print-database uses its own built-in database
# instead of using /etc/DIR_COLORS. Try to use the external file
# first to take advantage of user additions. Use internal bash
# globbing instead of external grep binary.
# sanitize TERM:
safe_term=${TERM//[^[:alnum:]]/?}
match_lhs=""
[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
[[ -z ${match_lhs} ]] \
&& type -P dircolors >/dev/null \
&& match_lhs=$(dircolors --print-database)
if [[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] ; then
# we have colors :-)
# Enable colors for ls, etc. Prefer ~/.dir_colors
if type -P dircolors >/dev/null ; then
if [[ -f ~/.dir_colors ]] ; then
eval $(dircolors -b ~/.dir_colors)
elif [[ -f /etc/DIR_COLORS ]] ; then
eval $(dircolors -b /etc/DIR_COLORS)
fi
fi
#PS1="$(if [[ ${EUID} == 0 ]]; then echo '\[\033[01;31m\]\h'; else echo '\[\033[01;32m\]\u@\h'; fi)\[\033[01;34m\] \w \$([[ \$? != 0 ]] && echo \"\[\033[01;31m\]:(\[\033[01;34m\] \")\\$\[\033[00m\] "
# https://bbs.archlinux.org/viewtopic.php?pid=1156660#p1156660
if [[ ${EUID} == 0 ]] ; then
sq_color="\[\033[0;31m\]"
else
sq_color="\[\033[0;34m\]"
fi
PS1="\n\$(if [[ \$? == 0 ]]; then echo \"$sq_color\"; else echo \"\[\033[0;31m\]\"; fi)\342\226\210\342\226\210 [ \W ] [ \t ]\n\[\033[0m\]\342\226\210\342\226\210 "
# Use this other PS1 string if you want \W for root and \w for all other users:
# PS1="$(if [[ ${EUID} == 0 ]]; then echo '\[\033[01;31m\]\h\[\033[01;34m\] \W'; else echo '\[\033[01;32m\]\u@\h\[\033[01;34m\] \w'; fi) \$([[ \$? != 0 ]] && echo \"\[\033[01;31m\]:(\[\033[01;34m\] \")\\$\[\033[00m\] "
alias ls="ls --color=auto"
alias dir="dir --color=auto"
alias grep="grep --color=auto"
alias dmesg='dmesg --color'
# Uncomment the "Color" line in /etc/pacman.conf instead of uncommenting the following line...!
# alias pacman="pacman --color=auto"
else
# show root@ when we do not have colors
PS1="\u@\h \w \$([[ \$? != 0 ]] && echo \":( \")\$ "
# Use this other PS1 string if you want \W for root and \w for all other users:
# PS1="\u@\h $(if [[ ${EUID} == 0 ]]; then echo '\W'; else echo '\w'; fi) \$([[ \$? != 0 ]] && echo \":( \")\$ "
fi
PS2="> "
PS3="> "
PS4="+ "
# Try to keep environment pollution down, EPA loves us.
unset safe_term match_lhs
# Try to enable the auto-completion (type: "pacman -S bash-completion" to install it).
[ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion
# Try to enable the "Command not found" hook ("pacman -S pkgfile" to install it).
# See also: https://wiki.archlinux.org/index.php/Bash#The_.22command_not_found.22_hook
[ -r /usr/share/doc/pkgfile/command-not-found.bash ] && . /usr/share/doc/pkgfile/command-not-found.bash
# ~/.bashrc
# If not running interactively, don't do anything
[[ $- != *i* ]] && return
alias ls='ls --color=auto'
#PS1='[\u@\h \W]\$ '
# Simple note taker
note () {
# if file doesn't exist, create it
if [[ ! -f $HOME/.notes ]]; then
touch $HOME/.notes
fi
if [[ $# -eq 0 ]]; then
# no arguments, print file
cat $HOME/.notes
elif [[ "$1" == "-c" ]]; then
# clear file
echo "" > $HOME/.notes
else
# add all arguments to file
echo -e "$@" >> $HOME/.notes
fi
# Simple ToDo list
todo() {
if [[ ! -f $HOME/.todo ]]; then
touch $HOME/.todo
fi
if [[ $# -eq 0 ]]; then
cat $HOME/.todo
elif [[ "$1" == "-l" ]]; then
cat -n $HOME/.todo
elif [[ "$1" == "-c" ]]; then
echo "" > $HOME/.todo
elif [[ "$1" == "-r" ]]; then
cat -n $HOME/.todo
echo -ne "----------------------------\nType a number to remove: "
read NUMBER
sed -ie ${NUMBER}d $HOME/.todo
else
echo "$@" >> $HOME/.todo
fi
#g09root="/home/naoh/Documents/BecaCIN/gaussian"
#GAUSS_SCRDIR="/home/naoh/Documents/BecaCIN/gaussian/scratch"
#export g09root GAUSS_SCRDIR
#. $g09root/g09/bsd/g09.profile
! Compile xft: Attempt to find a visual with the given bit depth; option -depth.
! URxvt*depth: bitdepth
! Compile xft: Turn on/off double-buffering for xft (default enabled). On some card/driver
! URxvt*buffered: boolean
! Create the window with the specified X window geometry [default 80x24]; option -geometry.
! URxvt*geometry: geom
! Use the specified colour as the windows background colour [default White]; option -bg.
! URxvt*background: colour
! Use the specified colour as the windows foreground colour [default Black]; option -fg.
! URxvt*foreground: colour
! Use the specified colour for the colour value n, where 0-7 corresponds to low-intensity
! URxvt*colorn: colour
! URxvt*colorBD: colour
! Use the specified colour to display bold or italic characters when the foreground colour
! URxvt*colorIT: colour
! Use the specified colour to display underlined characters when the foreground colour is
! URxvt*colorUL: colour
! If set, use the specified colour as the colour for the underline itself. If unset, use the
! URxvt*underlineColor: colour
! If set, use the specified colour as the background for highlighted characters. If unset,
! URxvt*highlightColor: colour
! If set and highlightColor is set, use the specified colour as the foreground for
! URxvt*highlightTextColor: colour
! Use the specified colour for the cursor. The default is to use the foreground colour;
! URxvt*cursorColor: colour
! Use the specified colour for the colour of the cursor text. For this to take effect,
! URxvt*cursorColor2: colour
! True: simulate reverse video by foreground and background colours; option -rv. False:
! URxvt*reverseVideo: boolean
! True: specify that jump scrolling should be used. When receiving lots of lines, urxvt will
! URxvt*jumpScroll: boolean
! True: (the default) specify that skip scrolling should be used. When receiving lots of
! URxvt*skipScroll: boolean
! Fade the text by the given percentage when focus is lost; option -fade.
! URxvt*fading: number
! Fade to this colour, when fading is used (see fading:). The default colour is black;
! URxvt*fadeColor: colour
! Set the application icon pixmap; option -icon.
! URxvt*iconFile: file
! Use the specified colour for the scrollbar [default #B2B2B2].
! URxvt*scrollColor: colour
! Use the specified colour for the scrollbars trough area [default #969696]. Only relevant
! URxvt*troughColor: colour
! The colour of the border around the text area and between the scrollbar and the text.
! URxvt*borderColor: colour
! Select the fonts to be used. This is a comma separated list of font names that are checked
! URxvt*font: fontlist
! URxvt*boldFont: fontlist
! URxvt*italicFont: fontlist
! The font list to use for displaying bold, italic or bold italic characters, respectively.
! URxvt*boldItalicFont: fontlist
! When font styles are not enabled, or this option is enabled (True, option -is, the
! URxvt*intensityStyles: boolean
! Set window title string, the default title is the command-line specified after the -e
! URxvt*title: string
! Set the name used to label the windows icon or displayed in an icon manager window, it
! URxvt*iconName: string
! True: de-iconify (map) on receipt of a bell character. False: no de-iconify (map) on
! URxvt*mapAlert: boolean
! True: set the urgency hint for the wm on receipt of a bell character. False: do not set
! URxvt*urgentOnBell: boolean
! True: use visual bell on receipt of a bell character; option -vb. False: no visual bell
! URxvt*visualBell: boolean
! True: start as a login shell by prepending a - to argv[0] of the shell; option -ls.
! URxvt*loginShell: boolean
! True: inhibit writing record into the system log file utmp; option -ut. False: write
! URxvt*utmpInhibit: boolean
! Specify a command pipe for vt100 printer [default lpr(1)]. Use Print to initiate a screen
! URxvt*print-pipe: string
! Set scrollbar style to rxvt, plain, next or xterm. plain is the authors favourite.
! URxvt*scrollstyle: mode
! Set the scrollbar width in pixels.
! URxvt*thickness: number
! True: enable the scrollbar [default]; option -sb. False: disable the scrollbar; option
! URxvt*scrollBar: boolean
! True: place the scrollbar on the right of the window; option -sr. False: place the
! URxvt*scrollBar_right: true
! True: display an rxvt scrollbar without a trough; option -st. False: display an rxvt
! URxvt*scrollBar_floating: boolean
! Align the top, bottom or centre [default] of the scrollbar thumb with the pointer on
! URxvt*scrollBar_align: mode
! True: scroll to bottom when tty receives output; option -si. False: do not scroll to
! URxvt*scrollTtyOutput: boolean
! True: scroll with scrollback buffer when tty receives new lines (i.e. try to show the
! URxvt*scrollWithBuffer: boolean
! True: scroll to bottom when a non-special key is pressed. Special keys are those which are
! URxvt*scrollTtyKeypress: boolean
! Save number lines in the scrollback buffer [default 64]. This resource is limited on most
! URxvt*saveLines: number
! Internal border of number pixels. This resource is limited to 100; option -b.
! URxvt*internalBorder: number
! External border of number pixels. This resource is limited to 100; option -w, -bw,
! URxvt*externalBorder: number
! Set MWM hints to request a borderless window, i.e. if honoured by the WM, the rxvt-unicode
! URxvt*borderLess: boolean
! Compile frills: Disable the usage of the built-in block graphics/line drawing characters
! URxvt*skipBuiltinGlyphs: boolean
! Specifies the terminal type name to be set in the TERM environment variable; option -tn.
! URxvt*termName: termname
! Specifies number of lines (pixel height) to insert between each row of the display
! URxvt*lineSpace: number
! True: handle Meta (Alt) + keypress to set the 8th bit. False: handle Meta (Alt) + keypress
! URxvt*meta8: boolean
! True: the mouse wheel scrolls a page full. False: the mouse wheel scrolls five lines
! URxvt*mouseWheelScrollPage: boolean
! True: store tabs as wide characters. False: interpret tabs as cursor movement only; option
! URxvt*pastableTabs: boolean
! True: blink the cursor. False: do not blink the cursor [default]; option -bc.
! URxvt*cursorBlink: boolean
! True: Make the cursor underlined. False: Make the cursor a box [default]; option -uc.
! URxvt*cursorUnderline: boolean
! True: blank the pointer when a key is pressed or after a set number of seconds of
! URxvt*pointerBlank: boolean
! Mouse pointer foreground colour.
! URxvt*pointerColor: colour
! Mouse pointer background colour.
! URxvt*pointerColor2: colour
! Specifies number of seconds before blanking the pointer [default 2]. Use a large number
! URxvt*pointerBlankDelay: number
! The string to send when the backspace key is pressed. If set to DEC or unset it will send
! URxvt*backspacekey: string
! The string to send when the delete key (not the keypad delete key) is pressed. If unset it
! URxvt*deletekey: string
! The characters used as delimiters for double-click word selection (whitespace delimiting
! URxvt*cutchars: string
! URxvt*{|}
! OverTheSpot, OffTheSpot, Root; option -pt.
! URxvt*preeditType: style
! name of inputMethod to use; option -im.
! URxvt*inputMethod: name
! The locale to use for opening the IM. You can use an "LC_CTYPE" of e.g. "de_DE.UTF-8" for
! URxvt*imLocale: name
! Specify the font-set used for XIM styles "OverTheSpot" or "OffTheSpot". It must be a
! URxvt*imFont: fontset
! Change the meaning of triple-click selection with the left mouse button. Instead of
! URxvt*tripleclickwords: boolean
! Enables "insecure" mode. Rxvt-unicode offers some escape sequences that echo arbitrary
! URxvt*insecure: boolean
! Set the key to be interpreted as the Meta key to: alt, meta, hyper, super, mod1, mod2,
! URxvt*modifier: modifier
! Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E) character is
! URxvt*answerbackString: string
! Turn on/off secondary screen (default enabled).
! URxvt*secondaryScreen: boolean
! Turn on/off secondary screen scroll (default enabled). If this option is enabled, scrolls
! URxvt*secondaryScroll: boolean
! Turn on/off hold window after exit support. If enabled, urxvt will not immediately destroy
! URxvt*hold: boolean
! Sets the working directory for the shell (or the command specified via -e). The path must
! URxvt*chdir: path
! Compile frills: Associate string with keysym sym. The intervening resource name keysym.
! URxvt*keysym.sym: string
! URxvt*perl-ext-common: string
! Comma-separated list(s) of perl extension scripts (default: "default") to use in this
! URxvt*perl-ext: string
! Perl code to be evaluated when all extensions have been registered. See the urxvtperl(3)
! URxvt*perl-eval: string
! Colon-separated list of additional directories that hold extension scripts. When looking
! URxvt*perl-lib: path
! Additional selection patterns, see the urxvtperl(3) manpage for details.
! URxvt*selection.pattern-idx: perl-regex
! Selection auto-transform patterns, see the urxvtperl(3) manpage for details.
! URxvt*selection-autotransform.idx: perl-transform
! Sets the hotkey that starts the incremental scrollback buffer search (default: "M-s").
! URxvt*searchable-scrollback: keysym
! Specifies the program to be started with a URL argument. Used by the "selection-popup" and
! URxvt*url-launcher: string
! Compile frills: Sets the WM_TRANSIENT_FOR property to the given window id.
! URxvt*transient-for: windowid
! Compile frills: Sets override-redirect for the terminal window, making it almost invisible
! URxvt*override-redirect: boolean
! Turn on/off ISO 14755 (default enabled).
! URxvt*iso14755: boolean
! Turn on/off ISO 14755 5.2 mode (default enabled).
! URxvt*iso14755_52: boolean
! #### configuracion copiada de
! http://wiki.afterstep.org/index.php?title=Rxvt-Unicode_Configuration_Tutorial
! transparency - true or false (default)
! URxvt*transparent: true
! tint with any color; i.e., blue, red, tomato4, olivedrab2, etc.
! some nice listings are at:
! http://www.nisrv.com/drupal/?q=node/11
! http://www.htmlgoodies.com/tutorials/colors/article.php/3478921
! URxvt*tintColor: Blue
! shading - 0 to 99 darkens, 101 to 200 lightens.
! Dont use with tintColor; just use a darker or lighter color instead.
!URxvt*shading: 40
! scrollback buffer lines - 65535 is max on most machines (64 is default)
URxvt*saveLines: 12000
! font color (default is black)
URxvt*foreground: White
! background color (prior to tinting) (default is white)
!URxvt*background: Black
URxvt.depth: 32
URxvt.background: rgba:1111/1111/1111/dddd
! Xft (X FreeType) with Bitstream, DejaVu, Liberation, or Terminus fonts:
! Fedora/debian packages: libXft/libxft2
! An anti-aliased font setup with Xft looks fantastic; it can be a bit choppy
! on older systems. You can always turn off anti-aliasing (antialias=false) if
! your terminal is sluggish. Use only ONE of the Xft pairs below:
! Xft: Bitstream fonts
! Fedora/debian packages: bitstream-vera-sans-mono-fonts/ttf-bitstream-vera
!URxvt*font: xft:Bitstream Vera Sans Mono:pixelsize=12:antialias=true:hinting=true
!URxvt*boldFont: xft:Bitstream Vera Sans Mono:bold:pixelsize=12:antialias=true:hinting=true
! Xft: DejaVu fonts
! Fedora/debian packages: dejavu-sans-mono-fonts/ttf-dejavu
!URxvt*font: xft:DejaVu Sans Mono:pixelsize=12:antialias=true:hinting=true
!URxvt*boldFont: xft:DejaVu Sans Mono:bold:pixelsize=12:antialias=true:hinting=true
! Xft: Liberation fonts
! Fedora/debian packages: liberation-mono-fonts/ttf-liberation
!URxvt*font: xft:Liberation Mono:pixelsize=13:antialias=true:hinting=true
!URxvt*boldFont: xft:Liberation Mono:bold:pixelsize=13:antialias=true:hinting=true
! Xft: Terminus fonts
! Fedora/debian packages: terminus-fonts/xfonts-terminus
!URxvt*font: xft:terminus:pixelsize=15
!URxvt*boldFont: xft:terminus:bold:pixelsize=15
! Traditional fonts - a more traditional font setup in lieu of xft
!URxvt*font:-*-courier-medium-r-normal-*-14-*-*-*-*-*-iso8859-1
!URxvt*boldFont:-*-courier-bold-r-normal-*-14-*-*-*-*-*-iso8859-1
URxvt.font: -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso8859-1
URxvt.boldFont: -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso8859-1
! Replace blue folder colors with a lighter shade for clarity. To
! set colored folders and files within urxvt, xterm, and aterm, add
! the following line to your ~/.bashrc ($HOME/.bashrc) file under
! the heading "! User specific aliases and functions":
! alias ls="ls -h --color=auto"
URxvt*color4: RoyalBlue
URxvt*color12: RoyalBlue
! scrollbar - true (default) or false
URxvt*scrollBar: true
! scrollbar position - left=false (default) or right=true
URxvt*scrollBar_right: true
! scrollbar style - rxvt (default), plain, next, or xterm
URxvt*scrollstyle: rxvt
! Perl extensions
URxvt*perl-ext-common: default,matcher,tabbed
!URxvt*perl-ext-common: default,matcher
!Open URLs with firefox
URxvt.url-launcher: /usr/bin/firefox
URxvt.matcher.button: 1
! Tabs
URxvt.tabbed.tabbar-fg: 2
URxvt.tabbed.tabbar-bg: 0
URxvt.tabbed.tab-fg: 3
URxvt.tabbed.tab-bg: 0
Thanks!

strace -o log urxvt -e exit
execve("/usr/bin/urxvt", ["urxvt", "-e", "exit"], [/* 24 vars */]) = 0
brk(0) = 0x21ee000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/usr/lib/perl5/core_perl/CORE/tls/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/CORE/tls/x86_64", 0x7fffb449bba0) = -1 ENOENT (No such file or directory)
open("/usr/lib/perl5/core_perl/CORE/tls/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/CORE/tls", 0x7fffb449bba0) = -1 ENOENT (No such file or directory)
open("/usr/lib/perl5/core_perl/CORE/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/CORE/x86_64", 0x7fffb449bba0) = -1 ENOENT (No such file or directory)
open("/usr/lib/perl5/core_perl/CORE/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/CORE", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=80332, ...}) = 0
mmap(NULL, 80332, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f9adfd01000
close(3) = 0
open("/usr/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200U\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1059240, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfd00000
mmap(NULL, 3154264, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adf7f3000
mprotect(0x7f9adf8f4000, 2097152, PROT_NONE) = 0
mmap(0x7f9adfaf4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x101000) = 0x7f9adfaf4000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libfontconfig.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libfontconfig.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000p\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=244696, ...}) = 0
mmap(NULL, 2340456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adf5b7000
mprotect(0x7f9adf5f1000, 2093056, PROT_NONE) = 0
mmap(0x7f9adf7f0000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x39000) = 0x7f9adf7f0000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libXft.so.2", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXft.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000C\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=85432, ...}) = 0
mmap(NULL, 2180648, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adf3a2000
mprotect(0x7f9adf3b6000, 2093056, PROT_NONE) = 0
mmap(0x7f9adf5b5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13000) = 0x7f9adf5b5000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libXrender.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXrender.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360\33\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=39376, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcff000
mmap(NULL, 2134664, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adf198000
mprotect(0x7f9adf1a1000, 2093056, PROT_NONE) = 0
mmap(0x7f9adf3a0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7f9adf3a0000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libX11.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libX11.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\335\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1289752, ...}) = 0
mmap(NULL, 3386784, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adee5d000
mprotect(0x7f9adef92000, 2097152, PROT_NONE) = 0
mmap(0x7f9adf192000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x135000) = 0x7f9adf192000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libstartup-notification-1.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libstartup-notification-1.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3003\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=39576, ...}) = 0
mmap(NULL, 2135192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adec53000
mprotect(0x7f9adec5c000, 2093056, PROT_NONE) = 0
mmap(0x7f9adee5b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7f9adee5b000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libperl.so", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\30\3\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0555, st_size=1740664, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcfe000
mmap(NULL, 3735184, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9ade8c3000
mprotect(0x7f9adea49000, 2097152, PROT_NONE) = 0
mmap(0x7f9adec49000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x186000) = 0x7f9adec49000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libpthread.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20o\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=144938, ...}) = 0
mmap(NULL, 2212976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9ade6a6000
mprotect(0x7f9ade6be000, 2093056, PROT_NONE) = 0
mmap(0x7f9ade8bd000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f9ade8bd000
mmap(0x7f9ade8bf000, 13424, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9ade8bf000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\34\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=2031229, ...}) = 0
mmap(NULL, 3840528, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9ade2fc000
mprotect(0x7f9ade49c000, 2097152, PROT_NONE) = 0
mmap(0x7f9ade69c000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a0000) = 0x7f9ade69c000
mmap(0x7f9ade6a2000, 14864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9ade6a2000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260*\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=89000, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcfd000
mmap(NULL, 2184800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9ade0e6000
mprotect(0x7f9ade0fb000, 2097152, PROT_NONE) = 0
mmap(0x7f9ade2fb000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f9ade2fb000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libfreetype.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libfreetype.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\335\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=675656, ...}) = 0
mmap(NULL, 2770832, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adde41000
mprotect(0x7f9addee0000, 2093056, PROT_NONE) = 0
mmap(0x7f9ade0df000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9e000) = 0x7f9ade0df000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libexpat.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libexpat.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`?\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=170144, ...}) = 0
mmap(NULL, 2265320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9addc17000
mprotect(0x7f9addc3e000, 2097152, PROT_NONE) = 0
mmap(0x7f9adde3e000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27000) = 0x7f9adde3e000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libxcb.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libxcb.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@\244\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=129776, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcfc000
mmap(NULL, 2225160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9add9f7000
mprotect(0x7f9adda15000, 2097152, PROT_NONE) = 0
mmap(0x7f9addc15000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e000) = 0x7f9addc15000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libdl.so.2", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\16\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14648, ...}) = 0
mmap(NULL, 2109712, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9add7f3000
mprotect(0x7f9add7f6000, 2093056, PROT_NONE) = 0
mmap(0x7f9add9f5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f9add9f5000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libxcb-util.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libxcb-util.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260$\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=20712, ...}) = 0
mmap(NULL, 2115824, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9add5ee000
mprotect(0x7f9add5f2000, 2097152, PROT_NONE) = 0
mmap(0x7f9add7f2000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f9add7f2000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libX11-xcb.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libX11-xcb.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \6\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=6008, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcfb000
mmap(NULL, 2101304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9add3ec000
mprotect(0x7f9add3ed000, 2093056, PROT_NONE) = 0
mmap(0x7f9add5ec000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x7f9add5ec000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libcrypt.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libcrypt.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\f\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=35160, ...}) = 0
mmap(NULL, 2318848, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9add1b5000
mprotect(0x7f9add1bd000, 2093056, PROT_NONE) = 0
mmap(0x7f9add3bc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7f9add3bc000
mmap(0x7f9add3be000, 184832, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9add3be000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libz.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000#\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=88592, ...}) = 0
mmap(NULL, 2183688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adcf9f000
mprotect(0x7f9adcfb4000, 2093056, PROT_NONE) = 0
mmap(0x7f9add1b3000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f9add1b3000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libbz2.so.1.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libbz2.so.1.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\27\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=65760, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcfa000
mmap(NULL, 2160936, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adcd8f000
mprotect(0x7f9adcd9e000, 2093056, PROT_NONE) = 0
mmap(0x7f9adcf9d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7f9adcf9d000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libpng16.so.16", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpng16.so.16", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20`\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=216216, ...}) = 0
mmap(NULL, 2311384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adcb5a000
mprotect(0x7f9adcb8e000, 2093056, PROT_NONE) = 0
mmap(0x7f9adcd8d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x33000) = 0x7f9adcd8d000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libXau.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXau.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \17\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14512, ...}) = 0
mmap(NULL, 2109744, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adc956000
mprotect(0x7f9adc958000, 2097152, PROT_NONE) = 0
mmap(0x7f9adcb58000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f9adcb58000
close(3) = 0
open("/usr/lib/perl5/core_perl/CORE/libXdmcp.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXdmcp.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\23\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=22632, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcf9000
mmap(NULL, 2117864, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9adc750000
mprotect(0x7f9adc755000, 2093056, PROT_NONE) = 0
mmap(0x7f9adc954000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f9adc954000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcf8000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcf7000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfcf5000
arch_prctl(ARCH_SET_FS, 0x7f9adfcf5740) = 0
mprotect(0x7f9ade69c000, 16384, PROT_READ) = 0
mprotect(0x7f9adc954000, 4096, PROT_READ) = 0
mprotect(0x7f9adcb58000, 4096, PROT_READ) = 0
mprotect(0x7f9adfaf4000, 4096, PROT_READ) = 0
mprotect(0x7f9add1b3000, 4096, PROT_READ) = 0
mprotect(0x7f9adcd8d000, 4096, PROT_READ) = 0
mprotect(0x7f9add3bc000, 4096, PROT_READ) = 0
mprotect(0x7f9addc15000, 4096, PROT_READ) = 0
mprotect(0x7f9add9f5000, 4096, PROT_READ) = 0
mprotect(0x7f9adf192000, 4096, PROT_READ) = 0
mprotect(0x7f9add5ec000, 4096, PROT_READ) = 0
mprotect(0x7f9adde3e000, 8192, PROT_READ) = 0
mprotect(0x7f9ade0df000, 24576, PROT_READ) = 0
mprotect(0x7f9ade8bd000, 4096, PROT_READ) = 0
mprotect(0x7f9adec49000, 16384, PROT_READ) = 0
mprotect(0x7f9adee5b000, 4096, PROT_READ) = 0
mprotect(0x7f9adf3a0000, 4096, PROT_READ) = 0
mprotect(0x7f9adf7f0000, 8192, PROT_READ) = 0
mprotect(0x7f9adf5b5000, 4096, PROT_READ) = 0
mprotect(0x72e000, 8192, PROT_READ) = 0
mprotect(0x7f9adfd15000, 4096, PROT_READ) = 0
munmap(0x7f9adfd01000, 80332) = 0
set_tid_address(0x7f9adfcf5a10) = 4336
set_robust_list(0x7f9adfcf5a20, 24) = 0
rt_sigaction(SIGRTMIN, {0x7f9ade6ac9f0, [], SA_RESTORER|SA_SIGINFO, 0x7f9ade6b5870}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x7f9ade6aca80, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7f9ade6b5870}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
fcntl(0, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
fcntl(1, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
fcntl(2, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
getuid() = 1000
getgid() = 100
geteuid() = 1000
getegid() = 100
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
dup2(2, 0) = 0
dup2(2, 1) = 1
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
epoll_create1(EPOLL_CLOEXEC) = 3
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
brk(0) = 0x21ee000
brk(0x220f000) = 0x220f000
pipe([4, 5]) = 0
fcntl(4, F_SETFD, FD_CLOEXEC) = 0
fcntl(4, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
fcntl(5, F_SETFD, FD_CLOEXEC) = 0
fcntl(5, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
rt_sigaction(SIGCHLD, {0x436480, ~[RTMIN RT_1], SA_RESTORER|SA_RESTART, 0x7f9ade6b5870}, NULL, 8) = 0
rt_sigaction(SIGHUP, {SIG_IGN, [HUP], SA_RESTORER|SA_RESTART, 0x7f9ade331390}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGPIPE, {SIG_IGN, [PIPE], SA_RESTORER|SA_RESTART, 0x7f9ade331390}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTERM, {0x436480, ~[RTMIN RT_1], SA_RESTORER|SA_RESTART, 0x7f9ade6b5870}, NULL, 8) = 0
rt_sigaction(SIGINT, {0x436480, ~[RTMIN RT_1], SA_RESTORER|SA_RESTART, 0x7f9ade6b5870}, NULL, 8) = 0
open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 6
fstat(6, {st_mode=S_IFREG|0644, st_size=1613216, ...}) = 0
mmap(NULL, 1613216, PROT_READ, MAP_PRIVATE, 6, 0) = 0x7f9adfb6b000
close(6) = 0
socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0) = 6
connect(6, {sa_family=AF_LOCAL, sun_path=@"/tmp/.X11-unix/X0"}, 20) = 0
getpeername(6, {sa_family=AF_LOCAL, sun_path=@"/tmp/.X11-unix/X0"}, [20]) = 0
uname({sys="Linux", node="arch", ...}) = 0
access("/home/naoh/.Xauthority", R_OK) = 0
open("/home/naoh/.Xauthority", O_RDONLY) = 7
fstat(7, {st_mode=S_IFREG|0600, st_size=49, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9adfd14000
read(7, "\1\0\0\4arch\0\0010\0\22MIT-MAGIC-COOKIE-1\0"..., 4096) = 49
read(7, "", 4096) = 0
close(7) = 0
munmap(0x7f9adfd14000, 4096) = 0
getsockname(6, {sa_family=AF_LOCAL, NULL}, [2]) = 0
fcntl(6, F_GETFL) = 0x2 (flags O_RDWR)
fcntl(6, F_SETFL, O_RDWR|O_NONBLOCK) = 0
fcntl(6, F_SETFD, FD_CLOEXEC) = 0
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"l\0\v\0\0\0\22\0\20\0\0\0", 12}, {"", 0}, {"MIT-MAGIC-COOKIE-1", 18}, {"\0\0", 2}, {"\230\22|\350 GxS-2,\352\251\245\245\265", 16}, {"", 0}], 6) = 48
recvfrom(6, 0x21f8c10, 8, 0, 0, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvfrom(6, "\1\0\v\0\0\0s\2", 8, 0, NULL, NULL) = 8
recvfrom(6, "\310\6\256\0\0\0 \1\377\377\37\0\0\1\0\0\24\0\377\377\1\7\0\0 \10\377\0\0\0\0"..., 2508, 0, NULL, NULL) = 2508
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"b\0\5\0\f\0\0\0BIG-REQUESTS", 20}], 1) = 20
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\1\0\0\0\0\0\1\205\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"\205\0\1\0", 4}], 1) = 4
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\2\0\0\0\0\0\377\377?\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
recvmsg(6, 0x7fffb449bfa0, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"7\0\5\0\0\0 \1_\1\0\0\10\0\0\0\377\377\377\0\24\0\6\0_\1\0\0\27\0\0\0"..., 44}, {NULL, 0}, {"", 0}], 3) = 44
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\4\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"b\0\5\0\t\0 \1", 8}, {"XKEYBOARD", 9}, {"\0\0\0", 3}], 3) = 20
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\5\0\0\0\0\0\1\207U\211\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
recvmsg(6, 0x7fffb449bee0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bee0, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"\207\0\2\0\1\0\0\0", 8}, {NULL, 0}, {"", 0}], 3) = 8
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\1\6\0\0\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
recvmsg(6, 0x7fffb449bf70, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bf70, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"\20\0\3\0\4\0\0\0TEXT\20\0\6\0\r\0\377\0COMPOUND_TEX"..., 836}, {NULL, 0}, {"", 0}], 3) = 836
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\7\0\0\0\0\0\25\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 1248
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bfe0, 0) = -1 EAGAIN (Resource temporarily unavailable)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"\24\0\6\0_\1\0\0+\1\0\0\37\0\0\0\0\0\0\0\0\341\365\5", 24}, {NULL, 0}, {"", 0}], 3) = 24
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0.\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
recvmsg(6, 0x7fffb449b9c0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449b9c0, 0) = -1 EAGAIN (Resource temporarily unavailable)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
futex(0x7f9add9f60c8, FUTEX_WAKE_PRIVATE, 2147483647) = 0
open("/usr/lib/perl5/core_perl/CORE/libXcursor.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 7
fstat(7, {st_mode=S_IFREG|0644, st_size=80332, ...}) = 0
mmap(NULL, 80332, PROT_READ, MAP_PRIVATE, 7, 0) = 0x7f9adfd01000
close(7) = 0
open("/usr/lib/libXcursor.so.1", O_RDONLY|O_CLOEXEC) = 7
read(7, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p+\0\0\0\0\0\0"..., 832) = 832
fstat(7, {st_mode=S_IFREG|0755, st_size=43680, ...}) = 0
mmap(NULL, 2138928, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 7, 0) = 0x7f9adc545000
mprotect(0x7f9adc54f000, 2093056, PROT_NONE) = 0
mmap(0x7f9adc74e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 7, 0x9000) = 0x7f9adc74e000
close(7) = 0
open("/usr/lib/perl5/core_perl/CORE/libXfixes.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXfixes.so.3", O_RDONLY|O_CLOEXEC) = 7
read(7, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\25\0\0\0\0\0\0"..., 832) = 832
fstat(7, {st_mode=S_IFREG|0755, st_size=22576, ...}) = 0
mmap(NULL, 2117912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 7, 0) = 0x7f9adc33f000
mprotect(0x7f9adc344000, 2093056, PROT_NONE) = 0
mmap(0x7f9adc543000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 7, 0x4000) = 0x7f9adc543000
close(7) = 0
mprotect(0x7f9adc543000, 4096, PROT_READ) = 0
mprotect(0x7f9adc74e000, 4096, PROT_READ) = 0
munmap(0x7f9adfd01000, 80332) = 0
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"-\0\5\0\1\0 \1\5\0\0\0fixed\0\0\0b\341\4\0\6\0ND", 28}, {"RENDER", 6}, {"\0\0", 2}], 3) = 36
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0000\0\0\0\0\0\1\213\0\216\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
recvmsg(6, 0x7fffb449be90, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449be90, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"\213\0\3\0\0\0\0\0\v\0\0\0\213\1\1\0", 16}, {NULL, 0}, {"", 0}], 3) = 16
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0001\0\0\0\0\0\0\0\0\0\v\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 1684
recvmsg(6, 0x7fffb449bea0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bea0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bea0, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bea0, 0) = -1 EAGAIN (Resource temporarily unavailable)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/naoh/.Xdefaults", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="arch", ...}) = 0
open("/home/naoh/.Xdefaults-arch", O_RDONLY) = -1 ENOENT (No such file or directory)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"/\0\2\0\1\0 \1", 8}, {NULL, 0}, {"", 0}], 3) = 8
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0003\0005\3\0\0\0\0\0\0\6\0\377\377\366\377\0\0\0\0\0\0\2\0\6\0\6\0\v\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 3316
recvmsg(6, 0x7fffb449bf30, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449bf30, 0) = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=6, events=POLLIN|POLLOUT}], 1, 4294967295) = 1 ([{fd=6, revents=POLLOUT}])
writev(6, [{"^\0\10\0\2\0 \1\1\0 \1\1\0 \1 \0 \0\0\0\0\0\0\0\0\0\0\0\0\0"..., 48}, {NULL, 0}, {"", 0}], 3) = 48
poll([{fd=6, events=POLLIN}], 1, 4294967295) = 1 ([{fd=6, revents=POLLIN}])
recvmsg(6, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0006\0\16\0\0\0\6\0\0\0\6\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 88
recvmsg(6, 0x7fffb449c050, 0) = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(6, 0x7fffb449c050, 0) = -1 EAGAIN (Resource temporarily unavailable)
getsockname(6, {sa_family=AF_LOCAL, NULL}, [2]) = 0
fcntl(6, F_SETFD, FD_CLOEXEC) = 0
rt_sigaction(SIGFPE, {SIG_IGN, [FPE], SA_RESTORER|SA_RESTART, 0x7f9ade331390}, {SIG_DFL, [], 0}, 8) = 0
brk(0x2230000) = 0x2230000
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
open("/dev/urandom", O_RDONLY) = 7
read(7, "O\0003n", 4) = 4
close(7) = 0
readlink("/proc/self/exe", "/usr/bin/urxvt", 4095) = 14
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
lseek(0, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
ioctl(1, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
lseek(1, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
ioctl(2, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
lseek(2, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
open("/dev/null", O_RDONLY) = 7
ioctl(7, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449be20) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(7, 0, SEEK_CUR) = 0
fcntl(7, F_SETFD, FD_CLOEXEC) = 0
fstat(7, {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 3), ...}) = 0
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
rt_sigaction(SIGCHLD, NULL, {0x436480, ~[KILL STOP RTMIN RT_1], SA_RESTORER|SA_RESTART, 0x7f9ade6b5870}, 8) = 0
brk(0x2251000) = 0x2251000
brk(0x2272000) = 0x2272000
stat("/usr/lib/urxvt/urxvt.pmc", 0x7fffb449ba10) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/urxvt.pm", {st_mode=S_IFREG|0644, st_size=60715, ...}) = 0
open("/usr/lib/urxvt/urxvt.pm", O_RDONLY) = 8
ioctl(8, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b720) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(8, 0, SEEK_CUR) = 0
read(8, "=encoding utf8\n\n=head1 NAME\n\nurx"..., 8192) = 8192
read(8, " filter/change and output the te"..., 8192) = 8192
stat("/usr/lib/urxvt/utf8.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/utf8.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/utf8.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/utf8.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/utf8.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/utf8.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/utf8.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/utf8.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/utf8.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/utf8.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/utf8.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/utf8.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/utf8.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/utf8.pm", {st_mode=S_IFREG|0444, st_size=7795, ...}) = 0
open("/usr/share/perl5/core_perl/utf8.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "package utf8;\n\n$utf8::hint_bits "..., 8192) = 7795
lseek(9, 378, SEEK_SET) = 378
lseek(9, 0, SEEK_CUR) = 378
close(9) = 0
stat("/usr/lib/urxvt/strict.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/strict.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/strict.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/strict.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/strict.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/strict.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/strict.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/strict.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/strict.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/strict.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/strict.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/strict.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/strict.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/strict.pm", {st_mode=S_IFREG|0444, st_size=3933, ...}) = 0
open("/usr/share/perl5/core_perl/strict.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "package strict;\n\n$strict::VERSIO"..., 8192) = 3933
brk(0x2293000) = 0x2293000
lseek(9, 1005, SEEK_SET) = 1005
lseek(9, 0, SEEK_CUR) = 1005
close(9) = 0
stat("/usr/lib/urxvt/Carp.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/Carp.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Carp.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Carp.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Carp.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Carp.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Carp.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Carp.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Carp.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Carp.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Carp.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Carp.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/Carp.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/Carp.pm", {st_mode=S_IFREG|0444, st_size=22004, ...}) = 0
open("/usr/share/perl5/core_perl/Carp.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "package Carp;\n\n{ use 5.006; }\nus"..., 8192) = 8192
stat("/usr/lib/urxvt/warnings.pmc", 0x7fffb449ad90) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/warnings.pm", 0x7fffb449ace0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/warnings.pmc", 0x7fffb449ad90) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/warnings.pm", 0x7fffb449ace0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/warnings.pmc", 0x7fffb449ad90) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/warnings.pm", 0x7fffb449ace0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/warnings.pmc", 0x7fffb449ad90) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/warnings.pm", 0x7fffb449ace0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/warnings.pmc", 0x7fffb449ad90) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/warnings.pm", 0x7fffb449ace0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/warnings.pmc", 0x7fffb449ad90) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/warnings.pm", 0x7fffb449ace0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/warnings.pmc", 0x7fffb449ad90) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/warnings.pm", {st_mode=S_IFREG|0444, st_size=20624, ...}) = 0
open("/usr/share/perl5/core_perl/warnings.pm", O_RDONLY) = 10
ioctl(10, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449aaa0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(10, 0, SEEK_CUR) = 0
read(10, "# -*- buffer-read-only: t -*-\n# "..., 8192) = 8192
read(10, "\", # [14]\n 'overflow'\t\t=> \"\\x"..., 8192) = 8192
brk(0x22b4000) = 0x22b4000
read(10, "ndef, @_) ;\n}\n\nsub import \n{\n "..., 8192) = 4240
brk(0x22d5000) = 0x22d5000
read(10, "", 8192) = 0
close(10) = 0
read(9, " # This *shouldn't* ha"..., 8192) = 8192
brk(0x22f6000) = 0x22f6000
lseek(9, 13751, SEEK_SET) = 13751
lseek(9, 0, SEEK_CUR) = 13751
close(9) = 0
stat("/usr/lib/urxvt/Exporter.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/Exporter.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Exporter.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Exporter.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Exporter.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Exporter.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Exporter.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Exporter.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Exporter.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Exporter.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Exporter.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Exporter.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/Exporter.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/Exporter.pm", {st_mode=S_IFREG|0444, st_size=18752, ...}) = 0
open("/usr/share/perl5/core_perl/Exporter.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "package Exporter;\n\nrequire 5.006"..., 8192) = 8192
brk(0x2319000) = 0x2319000
lseek(9, 2366, SEEK_SET) = 2366
lseek(9, 0, SEEK_CUR) = 2366
close(9) = 0
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
stat("/usr/lib/urxvt/Scalar/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/Scalar/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Scalar/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Scalar/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Scalar/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Scalar/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Scalar/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Scalar/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Scalar/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Scalar/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Scalar/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Scalar/Util.pm", {st_mode=S_IFREG|0444, st_size=8300, ...}) = 0
open("/usr/lib/perl5/core_perl/Scalar/Util.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "# Scalar::Util.pm\n#\n# Copyright "..., 8192) = 8192
lseek(9, 1109, SEEK_SET) = 1109
lseek(9, 0, SEEK_CUR) = 1109
close(9) = 0
stat("/usr/lib/urxvt/List/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/List/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/List/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/List/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/List/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/List/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/List/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/List/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/List/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/List/Util.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/List/Util.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/List/Util.pm", {st_mode=S_IFREG|0444, st_size=6391, ...}) = 0
open("/usr/lib/perl5/core_perl/List/Util.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "# List::Util.pm\n#\n# Copyright (c"..., 8192) = 6391
lseek(9, 652, SEEK_SET) = 652
lseek(9, 0, SEEK_CUR) = 652
close(9) = 0
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
stat("/usr/lib/urxvt/XSLoader.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/XSLoader.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/XSLoader.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/XSLoader.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/XSLoader.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/XSLoader.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/XSLoader.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/XSLoader.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/XSLoader.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/XSLoader.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/XSLoader.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/XSLoader.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/XSLoader.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/XSLoader.pm", {st_mode=S_IFREG|0444, st_size=10234, ...}) = 0
open("/usr/share/perl5/core_perl/XSLoader.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "# Generated from XSLoader.pm.PL "..., 8192) = 8192
lseek(9, 2886, SEEK_SET) = 2886
lseek(9, 0, SEEK_CUR) = 2886
close(9) = 0
stat("/usr/lib/perl5/core_perl/auto/List/Util/Util.bs", {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
stat("/usr/lib/perl5/core_perl/auto/List/Util/Util.so", {st_mode=S_IFREG|0555, st_size=31861, ...}) = 0
stat("/usr/lib/perl5/core_perl/auto/List/Util/Util.bs", {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
open("/usr/lib/perl5/core_perl/auto/List/Util/Util.so", O_RDONLY|O_CLOEXEC) = 9
read(9, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \26\0\0\0\0\0\0"..., 832) = 832
fstat(9, {st_mode=S_IFREG|0555, st_size=31861, ...}) = 0
mmap(NULL, 2122192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 9, 0) = 0x7f9adc138000
mprotect(0x7f9adc13d000, 2097152, PROT_NONE) = 0
mmap(0x7f9adc33d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 9, 0x5000) = 0x7f9adc33d000
close(9) = 0
mprotect(0x7f9adc33d000, 4096, PROT_READ) = 0
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
read(8, "\nThe following \"macros\" deal wit"..., 8192) = 8192
brk(0x233a000) = 0x233a000
brk(0x235b000) = 0x235b000
read(8, "e[, $hook_name..])\n\nDynamically "..., 8192) = 8192
brk(0x237c000) = 0x237c000
read(8, "o14755_52 jumpScroll loginShell\n"..., 8192) = 8192
read(8, " need. Correctly\naccounts for wi"..., 8192) = 8192
read(8, "row|col pair within the logical\n"..., 8192) = 8192
brk(0x239d000) = 0x239d000
stat("/usr/lib/urxvt/integer.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/integer.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/integer.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/integer.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/integer.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/integer.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/integer.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/integer.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/integer.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/integer.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/integer.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/integer.pm", 0x7fffb449b320) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/integer.pmc", 0x7fffb449b3d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/core_perl/integer.pm", {st_mode=S_IFREG|0444, st_size=3266, ...}) = 0
open("/usr/share/perl5/core_perl/integer.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b0e0) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "package integer;\n\nour $VERSION ="..., 8192) = 3266
read(9, "", 8192) = 0
close(9) = 0
read(8, "hen the timer\nis automatically r"..., 8192) = 3371
read(8, "", 8192) = 0
close(8) = 0
brk(0x23be000) = 0x23be000
close(7) = 0
stat("/home/naoh/.urxvt/ext/option-popup", 0x2207910) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/perl/option-popup", {st_mode=S_IFREG|0644, st_size=2172, ...}) = 0
open("/usr/lib/urxvt/perl/option-popup", O_RDONLY) = 7
ioctl(7, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449bc10) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(7, 0, SEEK_CUR) = 0
fstat(7, {st_mode=S_IFREG|0644, st_size=2172, ...}) = 0
fcntl(7, F_SETFD, FD_CLOEXEC) = 0
fstat(7, {st_mode=S_IFREG|0644, st_size=2172, ...}) = 0
read(7, "#! perl\n\n=head1 NAME\n\noption-pop"..., 8192) = 2172
read(7, "", 8192) = 0
close(7) = 0
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
stat("/home/naoh/.urxvt/ext/readline", 0x2207910) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/perl/readline", {st_mode=S_IFREG|0644, st_size=2069, ...}) = 0
open("/usr/lib/urxvt/perl/readline", O_RDONLY) = 7
ioctl(7, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449bc10) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(7, 0, SEEK_CUR) = 0
fstat(7, {st_mode=S_IFREG|0644, st_size=2069, ...}) = 0
fcntl(7, F_SETFD, FD_CLOEXEC) = 0
fstat(7, {st_mode=S_IFREG|0644, st_size=2069, ...}) = 0
read(7, "#! perl\n\n=head1 NAME\n\nreadline -"..., 8192) = 2069
read(7, "", 8192) = 0
stat("/usr/lib/urxvt/POSIX.pmc", 0x7fffb449b950) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/POSIX.pm", 0x7fffb449b8a0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/POSIX.pmc", 0x7fffb449b950) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/POSIX.pm", 0x7fffb449b8a0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/POSIX.pmc", 0x7fffb449b950) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/POSIX.pm", 0x7fffb449b8a0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/POSIX.pmc", 0x7fffb449b950) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/POSIX.pm", 0x7fffb449b8a0) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/POSIX.pmc", 0x7fffb449b950) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/POSIX.pm", 0x7fffb449b8a0) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/POSIX.pmc", 0x7fffb449b950) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/POSIX.pm", {st_mode=S_IFREG|0444, st_size=16637, ...}) = 0
open("/usr/lib/perl5/core_perl/POSIX.pm", O_RDONLY) = 8
ioctl(8, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b660) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(8, 0, SEEK_CUR) = 0
read(8, "package POSIX;\nuse strict;\nuse w"..., 8192) = 8192
stat("/usr/lib/urxvt/Fcntl.pmc", 0x7fffb449b310) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/Fcntl.pm", 0x7fffb449b260) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Fcntl.pmc", 0x7fffb449b310) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/site_perl/Fcntl.pm", 0x7fffb449b260) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Fcntl.pmc", 0x7fffb449b310) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/site_perl/Fcntl.pm", 0x7fffb449b260) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Fcntl.pmc", 0x7fffb449b310) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/vendor_perl/Fcntl.pm", 0x7fffb449b260) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Fcntl.pmc", 0x7fffb449b310) = -1 ENOENT (No such file or directory)
stat("/usr/share/perl5/vendor_perl/Fcntl.pm", 0x7fffb449b260) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Fcntl.pmc", 0x7fffb449b310) = -1 ENOENT (No such file or directory)
stat("/usr/lib/perl5/core_perl/Fcntl.pm", {st_mode=S_IFREG|0444, st_size=3924, ...}) = 0
open("/usr/lib/perl5/core_perl/Fcntl.pm", O_RDONLY) = 9
ioctl(9, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffb449b020) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(9, 0, SEEK_CUR) = 0
read(9, "package Fcntl;\n\n=head1 NAME\n\nFcn"..., 8192) = 3924
brk(0x23df000) = 0x23df000
read(9, "", 8192) = 0
close(9) = 0
getuid() = 1000
geteuid() = 1000
getgid() = 100
getegid() = 100
stat("/usr/lib/perl5/core_perl/auto/Fcntl/Fcntl.bs", {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
stat("/usr/lib/perl5/core_perl/auto/Fcntl/Fcntl.so", {st_mode=S_IFREG|0555, st_size=21954, ...}) = 0
stat("/usr/lib/perl5/core_perl/auto/Fcntl/Fcntl.bs", {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
open("/usr/lib/perl5/core_perl/auto/Fcntl/Fcntl.so", O_RDONLY|O_CLOEXEC) = 9
read(9, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\33\0\0\0\0\0\0"..., 832) = 832
fstat(9, {st_mode=S_IFREG|0555, st_size=21954, ...}) = 0
mmap(NULL, 2113800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 9, 0) = 0x7f9adbf33000
mprotect(0x7f9adbf36000, 2097152, PROT_NONE) = 0
mmap(0x7f9adc136000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 9, 0x3000) = 0x7f9adc136000
close(9) = 0
mprotect(0x7f9adc136000, 4096, PROT_READ) = 0
read(8, "\t\tEAGAIN EALREADY EBADF EBUSY EC"..., 8192) = 8192
brk(0x2400000) = 0x2400000
brk(0x2421000) = 0x2421000
read(8, "ub DELETE { delete $SIG{ &_check"..., 8192) = 253
read(8, "", 8192) = 0
close(8) = 0
stat("/usr/lib/perl5/core_perl/auto/POSIX/POSIX.bs", {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
stat("/usr/lib/perl5/core_perl/auto/POSIX/POSIX.so", {st_mode=S_IFREG|0555, st_size=98287, ...}) = 0
stat("/usr/lib/perl5/core_perl/auto/POSIX/POSIX.bs", {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
open("/usr/lib/perl5/core_perl/auto/POSIX/POSIX.so", O_RDONLY|O_CLOEXEC) = 8
read(8, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 Z\0\0\0\0\0\0"..., 832) = 832
fstat(8, {st_mode=S_IFREG|0555, st_size=98287, ...}) = 0
mmap(NULL, 2180400, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 8, 0) = 0x7f9adbd1e000
mprotect(0x7f9adbd30000, 2093056, PROT_NONE) = 0
mmap(0x7f9adbf2f000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 8, 0x11000) = 0x7f9adbf2f000
close(8) = 0
mprotect(0x7f9adbf2f000, 12288, PROT_READ) = 0
brk(0x2442000) = 0x2442000
stat("/usr/lib/urxvt/Tie/Hash.pmc", 0x7fffb449b950) = -1 ENOENT (No such file or directory)
stat("/usr/lib/urxvt/Tie/Hash.pm", 0x7fffb449b8a0) = -1 ENOENT (N

System migration

Similar Messages

Maybe you are looking for