System monitor in s_b6a_52000011 is missing

Hello,
the node of my system monitor with the system id in transaction s_b6a_52000011 is missing. Most documentation of ccms monitoring imply that this entry is already there. But how can I create it?
Thanks and Regards.
Oliver.

Hi,
Refer This links it will really help you.
http://help.sap.com/saphelp_nwpi71/helpdata/en/90/4e313f8815d036e10000000a114084/content.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/58c5f542-0801-0010-228b-c27a7b3c2752
Thanks.

Similar Messages

System Monitoring setup: missing database

I would like to set up System monitoring functionality for satellite system in SOLMAN.
The following problems occurred:
1) Missing database component of the system in System Monitoring set up
Usually the system has the following components in System Monitoring set up:
a) SAP Application Server
b) Server <servername>
c) Database <SID>-Database
For my satellite system the Database component c) is missed.
How can this component be activated? The satellite system has MaXDB
2) Missing system entries in tcode RZ20
I miss the entries of the system e.g. Shortdumps Frequency, AbapErrorInUpdate, Shortdumps in tcode RZ20.
How will the system values added into the RZ20?
Thank you very much!
regards
Thom

Solved!
You just need to maintain the DB in SMSY

Setup Central System Administratin and Setup System Monitoring grayed out

When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring). The link does not work. However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16). I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue. I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception: In note 834534, page 4, it states that the configuration user should have SAP_ALL. However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected.
We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
Has anyone encountered this issue?

Hi,
Yes, This could be an authorization issue.
You are able to Setup Early Watch Alert because you may have the role
SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
Assign these roles, you wil be able to setup System Monitoring and Administration.
1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
2. SAP_SETUP_DSWP (full authorization for all setup sessions)
3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
Also check these roles:
SAP_OP_DSWP (full authorization for all Operations sessions)
SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
This is the authorization object D_SOL_VIEW used in these roles.
Regards,
Sanjai

Database node appears late in System monitoring setup

Hi,
I am configuring central monitoring for my satellite systems from sloution manager. After connecting the systems through RFC when I go to setup system monitoring in DSWP I can see application server nodes but the databse node appears late, sometime after two days.
All the agents installation on satellite systems, saposcol, RFCs from Solman are OK.
Is there any reason for such delay? any known bug? My Solman is EHP1 SP03. Satellite systems mostly ERP6 or BI7.
Regards
Dhiraj

HI Dhiraj,
Check if this is applicable.
Note 1021779 - Databases are missing in the alert list.
Regards,
Gagan Deep Kaushal

Inactive Alert in System Monitoring

Hallo all,
we use SAP Solution Manager 7.0 EHP1 and implemented CEN to monitor our systems.
Sometimes there occurs an strange, inactive alert with the description "( . . : : ) ".
Does anybody know the reason for this?
Thanks for your replys.
Regards,
Philipp
Edited by: Philipp Schrieder on Sep 2, 2010 12:09 PM

Hi
can you please little bit elabarate your query?
is your alert is active but not accessable??
if yes, the alert is active in Solution Manager but Solution Manager does not find the technical MTE name (Monitor Tree Element) in the satellite system.
this might be communication problems if MTEs are not present in CCMS/RZ20 of the satellite system and are not refreshed.so check the RFC assignment in SMSY, i.e. the READ connection. if you even want deleting and recreating the RFCs for the satellite (SMSY with button "Generate RFC with Assistant").
Regarding the TRUSTED RFC, please check SAP Note 128447 (check that the authorization object S_RFCACL is assigned to the RFC users.
or else, you might be the resetting of the system monitoring and in this process remove the missing MTEs and settings. Removing the 'monitoring flag' for the corresponding satellite system in the System Monitoring setup session deletes all customizing settings and all user defined alerts. You had to enter your data again, however. To make sure to address possible inconsistencies, the session component can also be re-initialized (open 'Setup System Monitoring'; choose 'Session Components' - 'Re-initialize'; confirm; reselect the system that you want to activate).
and these alerts should be deactivated (remove the flag in column 'Activate').
check and update,
jansi

[Solved] System Monitoring for SSH

Hi all,
Am on the lookout for a system monitoring tool that doesn't require X/KDE/GNOME etc. - ideally something like htop but with the functionality of something like conky ie. can also show temperatures (from lm-sensors etc.) etc.
I'm running a basic no-frills Storage box that hosts subsonic and via SSH I would like to have a tool i can quickly call upon and give me live feedback on my CPU usage etc. as well as temps. - A colourful interface would be nice too
Any recommendations?
Thanks in advance!
Last edited by killercow (2011-07-29 18:25:53)

Thanks for your recommendations:
graysky: wanted to avoid running a webserver so gave monitorix a miss - though looks like a brilliant monitoring tool.
ChoK - thanks for putting me back on this path. I had an initial look and kind of gave up on conky being able to do this (especially since it explicitly advertises itself as a program that requires X) - however!!...
Found these options for conky.conf:
out_to_console
Print text to stdout.
out_to_ncurses
Print text in the console, but use ncurses so that conky can print the text of a new update over the old text. (In the future this will provide more useful things)
out_to_stderr
Print text to stderr.
out_to_x
When set to no, there will be no output in X (useful when you also use things like out_to_console). If you set it to no, make sure that it's placed before all other X-related setting (take the first line of your configfile to be sure). Default value is yes
Added
out_to_ncurses yes
out_to_x no
Commented out (to get rid of little warning message that appears otherwise):
#out_to_console no
..and voila! Conky a la console! Thanks a million! Time to play with my conky.conf file further

[Gnome3] Is gnome-system-monitor supposed to work?

Upgraded to Gnome 3.0.
When I start gnome-system-monitor I get:
gnome-system-monitor: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by gnome-system-monitor)
gnome-system-monitor: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by /usr/lib/libgtkmm-3.0.so.1)
gnome-system-monitor: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by /usr/lib/libglibmm-2.4.so.1)
Is this normal? Am I missing a library?
I have the following lib installed:
- testing/gtkmm 2.24.0-1
- testing/gtkmm3 3.0.0-1
Thanks
Alphazo
Last edited by alphazo (2011-04-08 13:33:48)

Thank you!
FWIW, multilib-testing was not listed in my /etc/pacman.conf.pacnew file (just upgraded today).

System monitoring - DSWP and RZ21

Hi all,
I am using sap solution managers workcenter "System monitoring" to set up the sap monitornig for a huge landscape. This works well, but to receive alerts (e.g. per mail) I additionaly have to do the settings in RZ21 (assign central autoreactions). This is not very comfortable because each setting has to be done twice (in dwsp and rz21) and there is also the risk to forget something. Do you know any other possibility? Do you know about plans to integrate the functions of RZ21 into DSWP?
Thanks
Michael

HI
We are setting up system monitoring is solman? i do have the same doubt as mentioned earlier
>
Karthik Bhirraju wrote:
> Please let me know whats the diffrence in configuring CCMS alerts in RZ21 (CEN- SOL) and configuring CCMS in(CEN- SOL) Solution Manager -> DSWP -> Solution Monitoring ?? is Solman-> Solution Monitoring a shortcu way or a WIZARD way to RZ21 (creating CCMSUSR, CCMSREG .. etc what ever we do in RZ21) or we need to configure RZ21 as prerequisite to configure solution monitorind in DSWP
can anyone guide me here? and what would this affect the RCA setup
jansi

System Monitoring / Administration asking for logon id

Each time I click on, "System Monitoring / Administration" in DSWP, a dialog box pops up asking me for a username and password. I've tried using the local system admin password, SAP*, my own SAP logon id, the J2EE_ADMIN user, etc.. but the dialog box just keeps popping back up. This doesn't happen under any other tab (i.e. Early Watch). If I hit cancel, I get the error below:
Logon failed
What has happened?
Call of URL http://sapsolman.mpfs.maines.net:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm terminated due to error in logon data.
Note
Logon performed in system SMS.
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:100-l:E-T:21-C:3-U:54-P:54-L:3
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Please tell me what I need to do to fix this authorization issue. Thank you.

Hi,
When it pops up for a logon details, please check below to which system is it connecting? Then the communication user which is being used in both the Managed and Managing system will be locked. After unlocking the user in the Managed system the issue will be resolved.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Nov 25, 2009 7:10 AM

System monitoring - alert email notification

Hello Sapers,
I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur. Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
Thank you very much for any help

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

System Monitoring - add SAP PI 711 system

All,
I'm facing problems when I want to add the ABAP stack of my SAP PI 7.11 system...
I use Monitoring Setup Guide (CEN SAP NetWeaver 7.0 EhP 1, SPS 08) to do my setup --> Entering Monitored ABAP Systems with Release SAP NetWeaver 7.1 in ST03G.
Using transaction RZ21--> technical infrastructure --> Configure central system --> create remote monitoring entry.
Next, I choose for DualStack for the component type to be monitored. I fill in all the necessary data and save the entry.
Nothing happens and I do not see the system appearing in the system overiew list.
For single-stack ABAP systems, no problems appear and I can add them.
Please advice.
Thanks.

Dear Dimitri,
The problem is that these products
01200314690800000134 -- 9 -- I -- C
01200314690800000134 -- 34 -- I -- C
These products will need to be reverted to S ( SAP BASIS) from C (NON_SAP BASIS)
Since these are primary keys, you will need to copy and change the + existing record, and then delete the old one.
Once this is done, you will have to perform the following:
Call transaction SMSY. Chose System Groups and Logical Components.
Expand 'Logical Components' - 'SAP NETWEAVER'. Expand the product
instances 'Mobile Infrastructure' and 'Process Integration'. For all
logical components that have systems repeat the following procedure.
1. Check if the logical component is used in solutions using the where
    used button. If no, you can continue with the next one.
2. If yes, note which systems are assigned to which role.
3. Go to change mode and remove the systems from the logical component
     by selecting system SPACE with the value help.
4. Save. Check if a warning says that System monitoring is active.
5. Add the same systems again.
6. Save.
7. If system monitoring was active in a solution the customer should
    run the system monitoring setup for the solution again.
If you are not comfortable making these changes, you can raise a message with SAP.
However once this is done, then the SIDs will be offered and selectable.
Regards,
Paul

Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

System Monitoring - Solman 7 EHP1

Hi
Solution Manager 7.0 EHP1 / Windows 2008 / Oracle
Satellite System R/3 Enterprise extn set 110 / Solaris on Sparc / Oracle
I am having trouble configuring System monitoring on solution Manager. Here is what I have done
Added the satellite system to SLD, Configured data collector (RZ70) in the satellite system, Pushed data from SLD to SMSYS (automatic transfer).
Installed CCMS agent + CCMSPING agent in satellite system. Checked connectivity in solman with RZ21. Connectivity is fine.
Created Monitor sets and monitors in CCMS for monitoring satellite system. Client data is visible in CCMS.
Created a solution in DSWP. Created logical component in SMSY. Assigned the logical component to the solution. Now I can see the data in DSWP.
Here are my questions
==================
1. In DSWP, everytime I have to view data, I have to click on "Setup System Monitoring" to view the alerts in the satellite system
I see a red alert reading for instance availability. Similarly,
In the system monitoring workcenter, I see the status of both the solution manager and the satellite system greyed out with a cross. When I move my mouse over it, it reads, no CCMSPING data available.
Any idea as to why this happens?
2. For what I see after I click on "Setup System Monitoring" I have parameters which I can configure. I see default values for these parameters. Is there like a recommendation or a template which can be used to setup these monitoring parameter values?
3. I have configured the ccmsping in the solution manager (for the solution manager) however the ccmsping service refuses to run. It throws a error reading "The system could not find the file specified". The ccmsping exe file is present in the location stated. Are there other files that this is looking for?
4. While registering the agent in the satellite system, I first registered with the CSMREG id. It failed with the message,
INFO: [SMG:040:CSMREG] connected to SMG, host sapsm.NA.XXX.NET, System Nr. 00, traceflag [ ]
INFO: SMG release is 701 , (kernel release 701 )
        RFC Error Info:
         message:
         status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
         intstat:
      Go Ahead anyway? n/[y] :
INFO: handling destination SAPCCM4X.SAPR3PR1.00
ERROR: can't register at SMG. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
RFC Error Info for SALF_CSM_AGENT_REGISTER
message:
status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
intstat:
I then did this with a dialog user. That worked. Agent was registered in solution manager. Any idea on why this error would show up with the CSMREG? I am concerned about issues which can come up when the password for the dialog user changes.
I am not sure how to upload screenshots of what i see, probably if i do that, it will be easy to relate to the issue which I am mentioning here. Is there a way I can do that?
Let me know if you need any more information from my side to understand this.
Ideas will be appreciated.
thanks
Ravi

Hello Ravi,
Additionally you will want to look at SAP Note 1175058 - Problems with CCMSPING in SAP Solution Manager, especially
c) Ensure that the message server host name in the monitoring options of CCMSPING and the message server of the corresponding main instance of the relevant system is the same in the SAP Solution Manager landscape
(SMSY). Important: The monitoring options of CCMSPING must not be configured using an IP address.
Regards,
Paul

System monitoring work center and CEN system

Hi everybody.
I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
Thanks for your answers!!
Fermí

Hi!
I've done finished this issue!
Please follow steps below:
1. Create activity type in T-Code: KL01
2. Go to KP26 to create the realtionship between Cost Center and Activity.
Now you can see new activity in Costing tab.
Regards!
Woody.

System Monitoring in Solution Manager

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

System monitor in s_b6a_52000011 is missing

Similar Messages

Maybe you are looking for