System Monitoring and CCMS Monitors
In our production environment we have working CCMS Monitors set up thru RZ20.
However if I go to solution_manager->system monitoring->operations tab, there are no alerts displayed on the page. Does system monitoring use the same backend as CCMS Monitoring? I am a little bit confused on this. If we set up System Monitoring, will this duplicate the CCMS Monitors we've previously set up?
If you want to see alerts on Operation tab in solution_manager->Solution Monitoring->System Monitoring you first need to run "Setup System Monitoring" (link is just below tab Operation or run in from Operations Setup tab). Setup will not duplicate CCMS monitors. It will just mark which of the available alerts should be taken into account for solution_manager->Solution Monitoring->System Monitoring report.
This might help you to start:
http://help.sap.com/saphelp_smehp1/helpdata/en/5b/0c9ccfd262427685c245d7ea85cd7a/content.htm
Similar Messages
-
"No CEN system configured for CCMS monitoring" message
Hello,
When I want to use the reports option on central mode I receive this message:
"No CEN system configured for CCMS monitoring"
Can someone please guide me through this configuration?
Thank you in advance,
RoyHi Roy,
Monitoring Setup Guide will tell you how to setup CEN
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c
Regards
Juan
Please reward with points if helpful -
What is difference between BP monitor and supplier monitor?
hi friends
what is difference between BP monitor and Supplier Monitor
what is tcode for BPmonitor
Regards
VinnyHi Vinny,
Please refer to the following links. These seems useful:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f051efda-bc58-2910-3785-e60d1f798c96
The specified item was not found.
New Business Process Monitoring functionalities in SAP Solution Manager ALE / IDoc Monitoring
Regards,
Saumya -
Source monitor and program monitor boxes will not display video in full only half
I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missing the top part. Like people's heads are cut off and can only see body. How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?
This is a known issue with a recent Windows update.
The Fix (post 3):
http://forums.adobe.com/message/5494175#5494175
The Status Update (posts 46 / 52):
http://forums.adobe.com/message/5555797#5555797 -
Solution Managers System monitoring and CCMS/CEN
Hi.
Could anybody enlighten me on the Role of CCMS / CEN in the Solution manager Monitoring.
I have set up solution manager to Monitor my landscape. I have set up user defined limits and email alerts. These Alerts and the alerting agent - I assume - are carried out on the system being monitored.
Now the question - I want the Solution manager box to be the CEN and do the Alerting centrally (from the SM box) - Will the MTE's and Alerts that I have assigned and configured through System Monitoring use the properties set up though the CCMS?
I assume I will have to install the CCMS agents on all the target boxes - Will the Solution manager box process the Statics and send out the alerts from itself? If so How much workload does this place on the network and the box?
Why does the solution manager not act as the central processing and alerting box from the start? If we go through the effort of setting up the monitoring - why does it not set up Collection and Alerting at the same time?
Any feedback will be appreciated.
Thanks
Terry H.Hi Terry,
Solution Manager System Monitoring is using CCMS infrastructure, so we have two different ways to collect data (alerts) from the satellite systems, first via CCMS agents as you mentioned or the option to use RFC destinations to read the alerts. This can be configured automatically by SMSY in Solution Manager. The second option produces higher network workload, because every alert will be checked every 3 minutes, with agents only new alert values will be pushed.
I hope this info helps you
Regards,
uDo -
Source Monitor and Program Monitor not playing back video
The last time I used Premiere Pro CC was Oct 8 and the program worked fine. As of today, I reopened the project file and the source and program monitors are displaying nothing respectively. However, the audio playback for both are unaffected. I've tried making a completely new project with different video and I get the same error. I've restarted Premiere, restarted the computer, and reinstalled Premiere. No help. :/
Premiere CC Version: 8.1.0
Computer information:
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.4 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Core): 256 KB
L3 Cache (per Processor): 12 MB
Memory: 16 GB
Graphics ATI Radeon HD 5770 1024 MB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: MP51.007F.B03
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11
Serial Number (system): H00470SREUH
Serial Number (processor tray): J504301VJBH8B
Hardware UUID: 4D6175EA-3353-5E84-BCA0-42A013A69BEDHi,
Please go to File > Project Settings > General and change the video renderer to GPU Acceleration software only and see if that helps.
Thanks,
Rameez -
Source monitor and programm monitor stopped displaying anything
Hey there,
I'm a CS6 Production Premium user and in severe trouble here: I'm working on a big 1080p AVC-Intra50 project for a client that is due next monday. I'm close to completion, but a couple of days ago, the source monitor stopped displaying video. It would show a still as I loaded in a clip, but as soon as I played back, the source monitor simply went black. The clip was playing though and audio can be heard. Not that big a problem, I thought, and simply used the program monitor for playback. But yesterday, the same thing happened to the program monitor as well. But not just that: Even the stills are gone now. Both monitors remain black at all times, even though playback and sound still work. So I got curious and tried different materials and different projects: AVCHD, DNxHD, even JPEGS, nothing shows on either monitors, regardless of the resolution. Still, everything works just fine on my laptop.
So I completely uninstalled the entire Creative Suite, used the Clean Script multiple times, including reboots, deleted all remaining files from user and windows directories and updated all my hardware to the latest drivers. Nothing. Both monitors remain black and useless. I didn't change anything to my Adobe setup, nor my hardware or software configuration while this error occured. I searched the web for hours and I'm completely at my wits' end. Any suggestions?
My system:
Windows 7 x64
Intel Core i7 2600k
8 GB RAM
ATi 6870I did purge the entire cache and database. Didn't help.
EDIT: I'm sorry, I only purged the database. Now, that I deleted all cached media files manually, the programm monitors is working again, but the source monitor is still out.
EDIT 2: Okay, now stuff is getting really weird: So the program monitor was working again. I continued editing for a bit, then put the program monitor into full screen and it went black again. Even when I went back to the normal size, it remains black, BUT, now the source monitor was working again. So I put the source monitor intro full screen and it went black again and both monitors stayed black.
So after deleting the media cache, I had the program monitor working again. After full screen use, it went balck, but the source monitor was working. After full screen use on the source monitor, both monitors are black again. What is going on?! -
Cisco Devices Syslog monitoring and user monitoring tools
Can anyone help me how to monitoring syslog and users log (which command use specific user). if any software or hardware need for this purpose we will purchace it. note that our network running all cisco devices (router, switch, ASA etc) and more then 200 devices are in our network.
thanks.Configuring Cisco Devices to Use a Syslog Server
Most Cisco devices use the syslog protocol to manage system logs and alerts. But unlike their PC and server counterparts, Cisco devices lack large internal storage space for storing these logs. To overcome this limitation, Cisco devices offer the following two options:
Internal buffer— The device's operating system allocates a small part of memory buffers to log the most recent messages. The buffer size is limited to few kilobytes. This option is enabled by default. However, when the device reboots, these syslog messages are lost.
Syslog— Use a UNIX-style SYSLOG protocol to send messages to an external device for storing. The storage size does not depend on the router's resources and is limited only by the available disk space on the external syslog server. This option is not enabled by default.
TIP
Before configuring a Cisco device to send syslog messages, make sure that it is configured with the right date, time, and time zone. Syslog data would be useless for troubleshooting if it shows the wrong date and time. You should configure all network devices to use NTP. Using NTP ensures a correct and synchronized system clock on all devices within the network. Setting the devices with the accurate time is helpful for event correlation.
To enable syslog functionality in a Cisco network, you must configure the built-in syslog client within the Cisco devices.
Cisco devices use a severity level of warnings through emergencies to generate error messages about software or hardware malfunctions. The debugging level displays the output of debug commands. The Notice level displays interface up or down transitions and system restart messages. The informational level reloads requests and low-process stack messages.
Configuring Cisco Routers for Syslog
To configure a Cisco IOS-based router for sending syslog messages to an external syslog server, follow the steps in Table 4-11 using privileged EXEC mode.
Table 4-11. Configuring Cisco Routers for Syslog
Step
Command
Purpose
1
Router# configure terminal
Enters global configuration mode.
2
Router(config)# service timestamps type datetime [msec] [localtime] [show-timezone]
Instructs the system to timestamp syslog messages; the options for the type keyword are debug and log.
3
Router(config)#logging host
Specifies the syslog server by IP address or host name; you can specify multiple servers.
4
Router(config)# logging trap level
Specifies the kind of messages, by severity level, to be sent to the syslog server. The default is informational and lower. The possible values for level are as follows:
Emergency: 0
Alert: 1
Critical: 2
Error: 3
Warning: 4
Notice: 5
Informational: 6
Debug: 7
Use the debug level with caution, because it can generate a large amount of syslog traffic in a busy network.
5
Router(config)# logging facility facility-type
Specifies the facility level used by the syslog messages; the default is local7. Possible values are local0, local1, local2, local3, local4, local5, local6, and local7.
6
Router(config)# End
Returns to privileged EXEC mode.
7
Router# show logging
Displays logging configuration.
Note
When a level is specified in the logging trap level command, the router is configured to send messages with lower severity levels as well. For example, the logging trap warning command configures the router to send all messages with the severity warning, error, critical, and emergency. Similarly, the logging trap debug command causes the router to send all messages to the syslog server. Exercise caution while enabling the debug level. Because the debug process is assigned a high CPU priority, using it in a busy network can cause the router to crash.
Example 4-12 prepares a Cisco router to send syslog messages at facility local3. Also, the router will only send messages with a severity of warning or higher. The syslog server is on a machine with an IP address of 192.168.0.30.
Example 4-12. Router Configuration for Syslog
Router-Dallas#
Router-Dallas#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router-Dallas(config)#logging 192.168.0.30
Router-Dallas(config)#service timestamps debug datetime localtime show-timezone
msec
Router-Dallas(config)#service timestamps log datetime localtime show-timezone msec
Router-Dallas(config)#logging facility local3
Router-Dallas(config)#logging trap warning
Router-Dallas(config)#end
Router-Dallas#show logging
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
Console logging: level debugging, 79 messages logged
Monitor logging: level debugging, 0 messages logged
Buffer logging: disabled
Trap logging: level warnings, 80 message lines logged
Logging to 192.168.0.30, 57 message lines logged
Configuring a Cisco Switch for Syslog
To configure a Cisco CatOS-based switch for sending syslog messages to an external syslog server, use the privileged EXEC mode commands shown in Table 4-12.
Table 4-12. Configuring a Cisco Switch for Syslog
Step
Command
Purpose
1
Switch>(enable) set logging timestamp {enable | disable}
Configures the system to timestamp messages.
2
Switch>(enable) set logging server ip-address
Specifies the IP address of the syslog server; a maximum of three servers can be specified.
3
Switch>(enable) set logging server severity server_severity_level
Limits messages that are logged to the syslog servers by severity level.
4
Switch>(enable) set logging server facility server_facility_parameter
Specifies the facility level that would be used in the message. The default is local7. Apart from the standard facility names listed in Table 4-1, Cisco Catalyst switches use facility names that are specific to the switch. The following facility levels generate syslog messages with fixed severity levels:
5: System, Dynamic-Trunking-Protocol, Port-Aggregation-Protocol, Management, Multilayer Switching
4: CDP, UDLD
2: Other facilities
5
Switch>(enable) set logging server enable
Enables the switch to send syslog messages to the syslog servers.
6
Switch>(enable) Show logging
Displays the logging configuration.
Example 4-13 prepares a CatOS-based switch to send syslog messages at facility local4. Also, the switch will only send messages with a severity of warning or higher. The syslog server is on a machine with an IP address of 192.168.0.30.
Example 4-13. CatOS-Based Switch Configuration for Syslog
Console> (enable) set logging timestamp enable
System logging messages timestamp will be enabled.
Console> (enable) set logging server 192.168.0.30
192.168.0.30 added to System logging server table.
Console> (enable) set logging server facility local4
System logging server facility set to
Console> (enable) set logging server severity 4
System logging server severity set to <4>
Console> (enable) set logging server enable
System logging messages will be sent to the configured syslog servers.
Console> (enable) show logging
Logging buffered size: 500
timestamp option: enabled
Logging history size: 1
Logging console: enabled
Logging server: enabled
{192.168.0.30}
server facility: LOCAL4
server severity: warnings(4
Current Logging Session: enabled
Facility Default Severity Current Session Severity
cdp 3 4
drip 2 4
dtp 5 4
dvlan 2 4
earl 2 4
fddi 2 4
filesys 2 4
gvrp 2 4
ip 2 4
kernel 2 4
mcast 2 4
mgmt 5 4
mls 5 4
pagp 5 4
protfilt 2 4
pruning 2 4
radius 2 4
security 2 4
snmp 2 4
spantree 2 4
sys 5 4
tac 2 4
tcp 2 4
telnet 2 4
tftp 2 4
udld 4 4
vmps 2 4
vtp 2 4
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
Console> (enable)
Configuring a Cisco ASA for Syslog >
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/monitor_syslog.html
You can get a free copy of Syslog server from here
http://www.kiwisyslog.com/free-edition.aspx
Hope it helps!!
Regards -
Source Monitor and Program Monitor dead in Premier Pro?
I recently installed Premiere Pro CS6 on my laptop so I could use it on location, but both the Source Monitor and the Program monitor are completly dead. The Source Monitor just displays a bright array of colours when you try to play anything, and the Program Monitor is just plain black. The audio still plays at full volume and I've tested the imported media (a mixture of .jpg, .mov and .mp4 fils) in other programs on my computer and they work fine. Any suggestions people?
Here is a screen grap of the Premiere Pro doing its thing: https://pbs.twimg.com/media/A2mmd7JCQAEyPXV.jpg:large
Thanks.
BriceMore information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Is your laptop one of those with dual video?
Dual laptop video
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-Mac Utility http://forums.adobe.com/thread/1017891?tstart=0
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
-link to why http://forums.adobe.com/message/4685328
What is the graphics adapter you have, and what is your driver version? -
Solution manager and CCMS monitoring of remote database
I have Solution Manager 7 SP Basis 6 installed. I have oracle remote databases connected successfully. Under DBCockpit I see the instances I want to monitor. I can see the backup, tablespaces, etc. These remote instances are SAP Portal JAVA only version 7 but under the dbcockpit alerts only shows alert monitor. The database check and check conditions are in white. Is there a way to see these and be able to report on them? The CCMS tree under the local solution manager also shows these connected remote instances but they are also white in color as if inactive. All CCMS agents and saposcol are running perfectly on the remote systems. The stats tables have been built, the synonyms for the solution manager are in place. What am I missing?
Hi,
Please download that attachment "scripts_1139623.sar" provided in SAP Note 1139623 - Using transaction RZ20 to monitor remote Oracle databases.
Upon extraction of scripts_1139623.sar the following files you will get.
rz20_nonabap.sql
dbcheckora10_oltp.sql
dbcheckora.sql
Then Perform the below mentioned Steps to resolve your issue.
Step 1: Create tables DBCHECKORA and DBMSGORA:
sqlplus SAPSR3DB/<pwd>
SQL> @rz20_nonabap.sql
Step 2: Fill the table DBCHECKORA:
sqlplus SAPSR3DB/<pwd>
SQL> @dbcheckora10_oltp
Step 3: Create the synonyms (as user ora<sid>):
brconnect -u / -c -f crsyn -o SAPSR3DB
sqlplus "/as sysdba"
CREATE PUBLIC SYNONYM SAP_DBSTATC FOR SAPSR3DB.DBSTATC;
CREATE PUBLIC SYNONYM SAP_DBCHECKORA FOR SAPSR3DB.DBCHECKORA;
CREATE PUBLIC SYNONYM SAP_DBMSGORA FOR SAPSR3DB.DBMSGORA;
Step 4: Grant Privileges for OPS$<SID>ADM User for the above created Tables
sqlplus "/as sysdba"
grant all on SAPSR3DB.DBSTATC to OPS$<SID>ADM;
grant all on SAPSR3DB.DBCHECKORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBMSGORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTAIHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATIORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATTORA to OPS$<SID>ADM;
commit;
Step 5:
Now after successful execution of above mentioned Steps , in DBACOCKPIT (system configuration), try to save the Remote DB entry with "Collect Alert Data". It will be saved without any error.
If you find any errors, post the error contents as a reply of this thread message.
Regards,
Bhavik G. Shroff -
Tivoli Monitoring and CCMS Integration
Dear all,
we're trying to integrate the CCMS of our solution manager with Tivoli ITM 6.1
The standard Tivoli monitor for the CCMS is not flexible enough cause it doesn't allow to monitor "CCMS Current Status".
We'd like to write a "Tivoli universal agent" based solution which could allow to read the CCMS Current Status on sampled basis.
Is there anyone who knows about eventual implementations already done on this issue?
Is there an expert who knows which tables are used for storing "CCMS Current Status" data?
Your help would be very much appreciated.
Kind regards,
Nicola.Nicole,
this has already been done, i was part of that team..from tivoli..........check with you ibm vendor......that might help, there is also a generic plugin......that might be available and open for customization.
Regards
Ravi Raman -
Program monitor and source monitor display issues
Hello, my program monitor is displaying strange colours (inverted?) when playing video. In addition, the source monitor will never display any video although audio plays back fine.
I am running on a Lenovo ThinkPad X200 laptop with Windows XP 32-bit and an Intel X4500MHD video card with the latest Lenovo-certified driver version.
From my testing, this problem appears regardless of project settings, file/footage settings, etc. I originally had the K-Lite codec pack installed although I have uninstalled that with no luck.
This problem surfaced from the moment I opened Premiere after first installing it and I have tried reinstalling the program, my video card drivers, and uninstalling the previously mentioned codecs.
Also I have a thread on this at the DVinfo forums which has had many responses although no working solution.
http://www.dvinfo.net/conf/attend-world-premiere/141131-weird-problem-program-monitor-pict ure.html
DxDiag file here - http://www.dvinfo.net/conf/attachments/attend-world-premiere/10719d1234000711-weird-probl em-program-monitor-picture-dxdiag.txt
Images in this post - http://www.dvinfo.net/conf/991137-post2.html
ThanksI would try whether killing these processes will help. It may well be that when you kill them all you may encounter hangs, because one or more may be needed for your machine. I would start by killing all Lenovo processes. One would expect that one of these processes may cause your problems, but unless you try it, you can't be sure. Unfortunately I don't have a Lenovo, so I can only guess.
Process PID CPU Description Company Name
System Idle Process 0 75.00
Interrupts n/a Hardware Interrupts
DPCs n/a 0.74 Deferred Procedure Calls
System 4 0.74
DTS.exe 1868 Data Transfer Service
ibmpmsvc.exe 1880 ThinkPad Power Management Service Lenovo
AtService.exe 1912 AFSS Service AuthenTec, Inc.
rapimgr.exe 4452 ActiveSync RAPI Manager Microsoft Corporation
unsecapp.exe 4628 WMI Microsoft Corporation
Smc.exe 712 Symantec CMC Smc Symantec Corporation
SmcGui.exe 3640 7.35 Symantec CMC SmcGui Symantec Corporation
S24EvMon.exe 764 Intel(R) Wireless Management Service Intel(R) Corporation
ccSvcHst.exe 1416 Symantec Service Framework Symantec Corporation
AcPrfMgrSvc.exe 1764 Access Connections Profile Manager Service Lenovo
EvtEng.exe 396 Intel(R) PROSet/Wireless Event Log Service Intel(R) Corporation
openvpnas.exe 796
mdm.exe 1056 Machine Debug Manager Microsoft Corporation
RegSrvc.exe 1432 Intel(R) PROSet/Wireless Registry Service Intel(R) Corporation
Rtvscan.exe 2104 Symantec AntiVirus Symantec Corporation
tvt_reg_monitor_svc.exe 2136 ThinkVantage Registry Monitor Service Lenovo Group Limited
TPHDEXLG.exe 2164 ThinkVantage Active Protection System - HDD Logger Module Lenovo.
TpKmpSvc.exe 2176
tvttcsd.exe 2212 tvttcsd Application Lenovo
rrpservice.exe 2228 rrpservice Module
rrservice.exe 2256 Rescue and Recovery Backup Service Lenovo Group Limited
tvtsched.exe 2268 ThinkVantage Scheduler Lenovo Group Limited
UpdateMonitor.exe 2292 Fast Restore Application Lenovo Group Limited
WLKEEPER.exe 2384 Intel(R) WLANKeeper SSO Service Intel(R) Corporation
AcSvc.exe 2428 Access Connections Main Service Lenovo
SvcGuiHlpr.exe 3204 Access Connections SvcGuiHlpr Application Lenovo
PWMDBSVC.exe 2504 PWMDBSVC Module
SUService.exe 2656 ThinkVantage System Update Service Lenovo Group Limited
PresentationFontCache.exe 4940 PresentationFontCache.exe Microsoft Corporation
tp4serv.exe 3316 PS/2 TrackPoint Daemon Lenovo Group Limited
TPOSDSVC.exe 3444 On screen display message generator for ThinkPad Lenovo Group Limited
TPONSCR.exe 3108 On screen display drawer Lenovo Group Limited
TpScrex.exe 3144 ThinkPad UltraZoom Lenovo Group Limited
ACTray.exe 3100 Access Connections Tray Application Lenovo
tpfnf7sp.exe 3368 Presentation Director Fn+F7 handler Lenovo Group Limited
TpShocks.exe 1184 ThinkVantage Active Protection System Lenovo.
LPMGR.EXE 3928 ThinkVantage Productivity Center Manager Lenovo Group Limited
LPMLCHK.EXE 732 ThinkVantage Productivity Center MailChecker Lenovo Group Limited
Amsg.exe 992 Message Center LENOVO
ccApp.exe 2960 Symantec User Session Symantec Corporation
scheduler_proxy.exe 3028 scheduler_proxy Application Lenovo Group Limited
cssauth.exe 3060 CSS Authentication Provider Lenovo Group Limited
igfxtray.exe 2992 igfxTray Module Intel Corporation
hkcmd.exe 2272 hkcmd Module Intel Corporation
igfxpers.exe 1048 persistence Module Intel Corporation
jusched.exe 824 Java(TM) Platform SE binary Sun Microsystems, Inc.
ZCfgSvc.exe 912 Intel(R) PROSet/Wireless Zero Config Service Intel(R) Corporation
iFrmewrk.exe 1296 Intel(R) PROSet/Wireless Framework Intel(R) Corporation
wcescomm.exe 1844 ActiveSync Connection Manager Microsoft Corporation
ONENOTEM.EXE 364 Microsoft Office OneNote Quick Launcher Microsoft Corporation
PWMUIAux.EXE 5144 Power Manager Lenovo Group Limited
7zFM.exe 2820 7-Zip File Manager Igor Pavlov -
Color difference between LCD monitor and iMac monitor?
So I recently purchased a 27" iMac (purchased it last week) and have hooked up my previous monitor, a 24" Apple LCD cinema display (aluminum enclosure) to have a dual-monitor setup.
Both are using Apple's stock color profiles, but the LCD cinema display is much more yellow than the iMac's display.
I tried setting the LCD display to use the iMac's color profile without any luck (it didn't get rid of the yellow tint).
I assumed Apple would have them using the same color settings, but alas it seems that isn't the case.
So, what should I do to get them to have matching color profiles?i have the same problem too...with the same imac 27" i7 like josh..hello josh?
the only different is my imac hooked up to 20" LCD cinema display (aluminum enclosure)
yap true josh, its more yellow in the secondary monitor..even with the same color profile.
i mainly use my imac for motion graphic n post production stuffs...its really annoy me for cannot find the match color for this two screens... ;(
hope somebody can show us the solution for this problem... -
New monitor and old monitor on mac mini
Hi
I have a mac mini with a thunderbolt port and a new 27 inch led cinema display, i have an old moniter which is 20 inch and i believe has a DVI connection.
Is there a way i can use this as a second monitor?
Many ThanksYou can utilise the second monitor by purchasing a Mini DisplayPort to DVI adapter, placing the adapter in the mini display port and then connecting a DVI cable from the adapter to the monitor.
-
Adobe Premiere Pro Help | Using the Source Monitor and Program Monitor
strJiveDescriptionhttp://helpx.adobe.com/premiere-pro/using/source-monitor-program-monitor.html
Even back in the days of printed manuals, there were often sections, that repeated, as they had application to a few slightly different topics. I always found that better (then), than just having a note to "go to _____ for info on this." Probably used a few extra trees, but one did not have to constantly flip back and forth. Now that we're talking 1's and 0's, I can see where a limited bit of repetition would enhance the flow of knowledge, and understanding, even when hyper-linked.
Just my observations,
Hunt
Maybe you are looking for
-
3 MONTHS DELAY FOR CONNECTING TO A NEW BUILD PROPE...
Hi all, This is my first post here, not intended to be a rant, but would like to share my anger and frustration I had with BT Openreach. This is a very long story. To begin, I am not an average user, I understand about BT Wholesale, ISP, service prov
-
How to create used vehicle other than in velo tcode
Hello All, I am new to VMS and i want to know how do we create a used vehicle for action (CRUV). in a report and then i want to create a purchase order for the vehicle created using trade in action ( POEU ). Please let me know if any one has worked
-
Everything seems to work fine on this Itouch but when I click on the Apps store the thing just sits that and spins but never connects. I checked Safari and it is working fine. checked all the retrictions and have everything relevant open. I tunes wor
-
Unable to see audit log in Adapter Engine (Communication channel monitoring
Hi I am unable to see audit log in Adapter Engine (Communication channel monitoring). Could please suggest what parameter to set to display in PI 7.0 visual administrator.
-
Printing Non-Work Intervals (Necking)
Hello, I have enabled the Activity non-work intervals in the Bar Necking Settings within Bar Settings. Although the 'necks' appear on screen, they do not appear in a PDF printout or a regular print. Is there a setting or workaround for this issue? Pl