System monitoring, backup management.

Hi Experts,
Am learning SAP BASIS, could any one suggest how to perform these two activities System monitoring and backup management. i would really feel happy if you give t codes or links which can help me to learn this topic.

Hi,
The answer to your query can be yielded by just searching over the forum or google. Anyhow, please find below some sample links and you can find many similar links if you search with key words like System Monitoring and Backup Management in SAP.
http://www.sap-img.com/basis/tcodes-used-for-daily-system-monitoring.htm
http://www.thespot4sap.com/Articles/SAP_BC_Auditing_And_Monitoring.asp
http://www.sap-img.com/basis/useful-sap-system-administration-transactions.htm
http://kmit4u.blogspot.com/search/label/Backup%20Management
Regards,
Sharath
Edited by: sharath Babu on Sep 23, 2010 2:10 PM

Similar Messages

System Monitoring in Solution Manager

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Solution Manager System Monitoring of a CE 7.10

Hi
I am trying to setup a Solution Manager Monitoring Solution for a CE 7.10 Enviroment.
I have already setup CEN in SOLMAN.
I have registered CE Systems with a sapccmsr j2ee agent.
I have setup the JCO RFC Connection in CE.
I have created the TCP/IP Connection to the JCO Connection in Solman.
I have set the TCP/IP Connection in RZ21 as the J2EE Customizing Destination.
The solution involves only 1 Logical Component with 3 CE Systems.
When I go to the solution manager setup and try to configure the MTE Nodes for my solution I cannot get the MTE context while clicking in Activate Monitoring for other Software Components
I choose Java Application Server, choose my server, choose CEn but when i have to choose the context of the MTE i get an empty list.
IF i go Activate Monitoring for Other Servers and choose the server I get the contexts of the remote server, but I can only choose one.
So how can I see the context of the CE servers in the Software component part?
Ty.

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

Solution manager system monitoring configuration

Hi
I am configuring system monitoring in solution manager (Oracle / Solman 7.0 EHP1 / Windows 2008 / VM)
I have added a satellite system to solution manager thru CCMS and CCMSPING agents. These are visible in RZ21 / Technical infrastructure / Overview. This has also been added in SMSY, SMSY when refreshed pulls out data from the satellite system. However I am having trouble with the transaction SOLUTION_MANAGER. This is where I setup system monitoring.
Here I find the solution maanger system however am not able to find the satellite system which I had added.
Thoughts?
thanks
Ravi

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

System Monitoring in Solution Manager 4.0

Hi all,
I want to set up system monitoring for landscape BW, ECC and SCM systems using Solution Manager 4.0 and am new to Sol Man.
So could anyone please help me with the steps.
Thanks in advance,
Sandeep.

Sandeep,
Trust me, there is no one resource that you can refer to and complete this system monitoring project. I recently configured this a couple of days ago. I can tell you that I haven't completed it yet. I have only completed the configuring the 'System Monitoring' part of it. I am yet to define monitors so that, I can monitor what I want of the satellite systems. So far, it took me about 4 days. Let me point out the basic steps you need to follow. Beyond that, please refer to the links I paste below:
Steps to configure 'System Monitoring' in Solution Manager:
1. Follow the 'Solution Manager Preparation' found under SPRO --> Solution Manager --> Read Me.
2. Make sure you have the latest ST-ICO and ST-SER installed in your Solution Manager (Note: 892412).
3. Make sure the Solution Manager has the latest support packages applied.
4. Prepare the 'Satellite Systems' as per note 455356:
     a. Create the role 'SAP_BC_CSMREG' (if it doesn't exist) with the following authorization objects
          --> S_CCM_RECV (with the objects and values mentioned in the above note)
          --> S_RFC (with the objects and values mentioned in the above note)
          --> S_RZL_ADM (with the objects and values mentioned in the above note)
          --> S_CUS_CMP (with the objects and values mentioned in the above note)
     b. Create a 'communication' user CSMREG (if it doesn't exist) and assign the profile S_CSMREG
5. Create the user CSMREG in Solution Manager using RZ21 transaction
          -->RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG user (Provide the required password and confirm).
6. An agent needs to be registered in all the satellite systems that collects the monitor statistics and pass on to the Solution Manager. Before registering the agent in the satellite system, a 'CSMCONF' file has to be generated in the Solution Manager and store it in a central location which, will be used by the CCMS agent while registration. This CSMCONF file holds the communication details for the agent to talk to the Solution Manager. To create CSMCONF file, proceed as follows:
          --> RZ21 --> Technical Infrastructure --> Configure Central System --> Create Start CSMCONF for Agents
          --> Store the file in a central location that can be accessed by the satellite system/s.
7. In the satellite system, copy the file 'CSMCONF' to the working directory of SAPCCM4X (F:\usr\sap\PD1\SYS\DVEBMGS01\log\sapccm4x - for example. If the 'sapccm4x' folder does not exist, create one).
8. Copy the downloaded 'SAPCCM4X.exe' file to the kernel directory on the satellite system.
9. Execute "sapccm4x -R pf=<path of the instance profile>". This should ask for the 'CSMREG' password and the admin user password on the solution manager system. Please input the same and confirm other questions. Upon confirmation, the CCMS agent should be registered in the satellite system.
10.Make sure you establish the trusted RFC connection on the Solution Manager to the satellite system you would want to monitor. This you can do from 'SMSY' transaction.
11.After successfully creating the RFC connections, and assigning the system to a logical component, please go to transaction, 'SOLUTION_MANAGER'. You can see the monitored system in the System Overview.
Below are the reference links:
Weblogs Related to Solution Manager
Hope this helps. Award with relevant points if my response is helpful.
Thank you.

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

System Monitoring Setup in Solution Manager

Hello Experts,
We are going to implement and configure Solution Manager - System monitoring setup for pre testing purpose
Currenly we have installed below SAP Systems
1.Solution Manager Server
2.ECC server (Without Ides) - Abap
3.CRM Server (Without Ides) -Abap + Java
We need to setup below tasks in Solution Manager
1.Early watch alert
2.System Monitoring
3.Central System Administration
4.Business Process Monitoring
5.Service Level reporting
1.Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
Could you please someone give input reg this.
Thanks
Thirumal
Edited by: Thiru Thirumal on Aug 6, 2008 4:56 AM
Edited by: Thiru Thirumal on Aug 6, 2008 4:57 AM

Hi,
Q. Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
A. Yes.
Check with links for
1.Early watch alert
This process helps you to identify potential problems early, avoid bottlenecks, and monitor the performance of your ABAP and JAVA systems and your most important business processes, regularly, automatically and effectively. The data collection infrastructure comprises the ABAP Service Data Control Center and the JAVA function module Data Provider. The SAP EarlyWatch Alert in the SAP Solution Manager is a service provided by SAP.
To be able to use it, you have:
maintained the non-ABAP systems correctly in the system landscape maintenance (transaction SMSY)
RFC u2013 Connections between: and an RFC u2013 Connections established.
your satellite systems and the SAP Solution Manager system
SAP Solution Manager and the SAP Service Marketplace
Solution Manager system and Solution Manager Diagnostics
Cf: Solution Manager IMG (transaction SPRO).
checked the availability of the tools required for the SAP Service sessions (add-on ST-A/PI), with the report RTCCTOOL.
activated Alert Monitoring and set-up the Automatic Session Manager (ASM) in the Service Data Control Center (SDCCN) of your satellite systems, for all SAP satellite systems and the central SAP Solution Manager of your solution
set-up your systems in a solution landscape in the SAP Solution Manager
configured Solution Manager Diagnostics
2.System Monitoring
The system monitoring in the SAP Solution Manager is, as described above, like a system-wide central CCMS. It can also contain the central CCMS (CEN) of satellite systems. These CENs can then monitor other components.
The graphical display in the SAP Solution Manager gives you access to the alerts of all systems in a solution. You can go to the local or central CCMS of the satellite systems.
The system proposes the most important alerts in the CCMS monitor collection, according to SAP experience, and their alert thresholds, for each system in the solution, in the system monitoring Session. You can activate or deactivate these alerts. The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager, overwriting the values in the local CCMS.
3.Central System Administration
You activate the customizing for business processes in your solution, in the Business Process MONITORING session in the SAP Solution Manager. A monitoring tree element (MTE), or a monitor collection, u201EBPMu201C of several monitoring objects, is created in the local or central (CEN) CCMS of the satellite system.
The data is collected for the monitoring types of the business process monitoring in contrast to system monitoring, as follows:
● The system collects performance (dialog transactions), posting cancellations (V1 and V2) and u201EOther CCMSu201C and interface data, in the local CCMS of the satellite systems.
● The system collects background processing, application list, application monitors, delivery lists, and document size data, in the central SAP Solution Manager CCMS.
The SAP Solution Manager system copies the data from the local CCMS.
The graphical display in the SAP Solution Manager simplifies access to the alerts for the business processes, business process steps or the interfaces between the systems in a solution. You can go to the local CCMS of the satellite systems.
The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager. These overwrite the values in the local CCMS.
4.Business Process Monitoring
The system and business process monitoring (including interface monitoring) in the SAP Solution Manager, both use the Computing Center Management System (CCMS) (transaction RZ20) architecture. This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions. You can also handle the alerts centrally, without having to go to the local CCMS of the satellite systems.
You can see the alerts from several systems in a solution landscape in the SAP Solution Manager, in a graphical overview, in contrast to the local CCMS of the SAP Solution Manager satellite systems. This is the view of a central CCMS (CEN). You can also monitor non-SAP systems in a central CCMS (CEN) of a satellite system
5.Service Level reporting
http://service.sap.com/solutionmanager for all solman tasks as given below.
http://www.asap.net.cn/homepage_en/Solution%20Manager%20EN.pdf
http://help.sap.com/saphelp_sm32/helpdata/en/1b/f02c41ab78f66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/9f/1f46570f8a4a268b3154e0e0f07280/content.htm
Regards,
Srini Nookala

System Monitoring error in Solution Manager 4.0

Hi All,
I am configuring "System Monitoring" in Solution Manager 4.0.
I have successfully added satellite system through SMSY
as well as i have added system to the Logical Component, but when i open tcode solution_manager i am getting error Action Cancelled Internet Explorer was unable to link to the Web page you requested
ICM is running and I have also activated several services from SICF.
Please guide me in this scenario.
Points will be awarded
Thanks
Sachin

Hi,
Follow the below steps
1) Maintain the host file
Details of Solution manager in the following format
ipaddress host name fully qualified name
2) Internet explorer
Tools--> Internet options --> Connections --> Advanced settings
Maintain the bypass proxy there.
Since you are using GUI 710 your IE should be compatable. use IE 7.
If this answers your query, change the status of thread as Answered
regards
Naveen

'Setup System Monitoring' option is disabled in solution manager

Hello,
I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
Thank you in advance.
Sameer
Edited by: Sameer Pant on Mar 19, 2011 1:07 AM

Hi Lakshmi,
But when i right click on the qualifier
No u hv to right click on a field to which Compound field is mapped ( Ur Main Table Field)
Right Click on Compound field & choose option Set Qualified Update.
New Links: Create
Existing Links: Update (All Mapped Qualifiers)
Thanks,
Maheshwari

System monitoring configuration in solution manager EHP1

Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
Rohit

I'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Monitoring a non-SAP satellite system in Solution Manager

Hi Folks,
I have two quick questions.
1.) What is the proper procedure/tool for monitoring a non-NW system in Solution Manager? Should I be able to use sapccmsr and saposcol on these systems?
2.) What is the proper way to connect a non-NW system to the SLD? Should I be able to use saposol and sldreg for these?
Background:
- My Solution Manager system is a NW70 EHP1
- Solution Manager Diagnostics is installed and monitoring my ABAP and Java systems
- I have my CCMS agents registered back to my CEN for the ABAP and Java systems
Satellite systems:
- Multiple Wintel servers (both IA32 and x64) that are running;
o standalone SQL server databases
o BOE/BOBJ
o BPC for Microsoft
Section 4.8 of the Monitoring Setup Guide (CEN SAP Netweaver 7.0 SPS18) states that I should be able to monitor a standalone database.
My confusion isu2026 in the absence of an SAP filesystem (kernel) and the standard SAP environment variables that get set during an install, how do I register the agents? The executables do not want to launch.
Thank you,
Bill

Dear William,
Monitoring of NON-SAP systems is not actually done on the solution manager system itself. The solution manager system gets its feed of alert information from the satellite, specifically CCMS. For SAP systems, alerts from CCMS are set up and activated by default. For Third-Party systems you have to be ablke to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
You can get more information on CCMS agents via the website at http://service.sap.com/monitoring.
Go to "system Monitoring and Alert Management" > "Monitoring in Detail".
I hope this information is helpful.
Regards,
Paul

Solution Manager System Monitoring for non SAP system

Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan Hung

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

Regarding authorization in solution manager for Central system monitoring

Hi,
I want to Prevent users from deleting Task logs in central system monitoring
in solution manager
I have assigned the roles SAP_SV_SOLUTION_MANAGER_DISP
But it gives display authorization for everything unable to keep track of
changes in monitoring
Can anyone please help me to prevent users from deleting task log history
Since I have to keep track of one month data
What can be the suitable role for it ? or what authorization objects i should
make a change to prevent deleting tasklog.
Kindly help me in this regard
Regards
Sanjeev.S

Thanks for your prompt reply
I am not saying about SDDCN
In transction solution_manager => opertation set up = > central system
administation
we will do manual monitoring for sattelite systems in this path. what we monitored
will be entered in task log history.
So what can be the suitable role to prevent the deleting of the task log history.
There is option delete task history. if any one by mistake clicked on that ,all the
records of monitoring will be lost.
so kindly suggest me a suitable solution

Need help in Solution Manager System Monitoring-activating Instance Status

I would like to use System Monitoring with Solution Manager.
The agents CCMSPING and SAPCCM4X are installed on the monitored system and CCMS is configured
I've already created a solution and a logical component. Now i would like to activate Instance Status in the tree when i enter in Setup System Monitoring .... but i get a red alert an the following Message Instance status is no performance alert. Thresholds have been deleted ... how can i activate this Instance Status?
I am going my first steps in SAP SolMan and tried to solve this problem but i had no success. Can someone please help me? What i am doing wrong?
thanks...
Edited by: Satish Machavarapu on Dec 15, 2009 12:46 PM
Edited by: Satish Machavarapu on Dec 15, 2009 1:04 PM

Hi,
If you want to monitor the Availability status of the instance then check the below docs
[http://help.sap.com/saphelp_nw70/helpdata/EN/38/9e100dd7980fffe10000009b3810a5/frameset.htm]
[CCMSPING config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/d547f687-0901-0010-07a9-ce64cc044215]
[CCMS Agent config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/40ef0688-814a-2a10-afb1-89b40d83d0e0]
regards
Naveen
Edited by: Naveen Kumar on Dec 15, 2009 1:07 PM

System monitoring, backup management.

Similar Messages

Maybe you are looking for