System monitoring - DSWP and RZ21

Hi all,
I am using sap solution managers workcenter "System monitoring" to set up the sap monitornig for a huge landscape. This works well, but to receive alerts (e.g. per mail) I additionaly have to do the settings in RZ21 (assign central autoreactions). This is not very comfortable because each setting has to be done twice (in dwsp and rz21) and there is also the risk to forget something. Do you know any other possibility? Do you know about plans to integrate the functions of RZ21 into DSWP?
Thanks
Michael

HI
We are setting up system monitoring is solman? i do have the same doubt as mentioned earlier
>
Karthik Bhirraju wrote:
> Please let me know whats the diffrence in configuring CCMS alerts in RZ21 (CEN- SOL) and configuring CCMS in(CEN- SOL) Solution Manager -> DSWP -> Solution Monitoring ?? is Solman-> Solution Monitoring a shortcu way or a WIZARD way to RZ21 (creating CCMSUSR, CCMSREG .. etc what ever we do in RZ21) or we need to configure RZ21 as prerequisite to configure solution monitorind in DSWP
can anyone guide me here? and what would this affect the RCA setup
jansi

Similar Messages

Documentation for Alerts in System Monitoring (DSWP)

Hello Community!
I am working with SAP Solution Manager for about a week. At the moment i am trying to set up a useful system monitoring with System Monitor.
Because i did not found a helpful documentation yet and i do not want to proceed in trail&error anymore - i want to know, if there is some kind of documentation for each standard alert in system monitoring function of the SolMa? For example "R3SysLog"-Alert complies with the results of tcode SM21.
Thanks for your answers in advance!

Hi Helge,
Refer to the following thread :
[https://www.sdn.sap.com/irj/scn/thread?messageID=2309953#2309953]
Also,refer to the following URL:
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a751a1ec-0a01-0010-f0ba-89e4c5cd0261]
Hope this helps.
Regards,
Adren

Error "Could Not intialize" with IE8 and System Monitoring in DSWP

Dear All,
Having upgraded to IE8, I am getting "Could Not Initialize" error when executing System Monitoring through TCode DSWP in Solution_Manager.Please kindly assist.
Thank you.
Regards,
John

Hello John,
IE8 requires SAPGUI 720, so you may want to ensure yor SAPGUI ersion is at this level.
Regards,
Paul

How to configurate Central system Monitoring - TX. DSWP

Greetings experts,
We Solman 7.1
Need information on the central activation from solution manager monitoring system to satellite systems.
We need to activate alarm and mailing of these notices
Thanks for the information to this point.
Regards

Hi,
Kindly use below steps:
1. First you to install CCM4X on server
2. Create all the system in t code DSWP then operation setup -> solution monitoring -> system monitoring and solution monitoring you to activate what ever you needs once done
3. go to t code rz21 -> select technical inrastrucure activate all the configuration
also check below Link:
https://wiki.sdn.sap.com/wiki/display/SM/Home
Regards,
kalees

Setup system monitoring in dswp

Hi,
One of my ecc qa system in not coming in setup system monitoring of dswp. I have included this ecc qa satelite system in smsy and MOPz is working fine for that system. But it is not coming in setup system monitioring. Actually I want to administer the systems centrally from solman.
I am able to get the ecc dev system in set system monitoring.
Regards,
Sudip

Hi,
we should create one logical comp for one product systems of Dev,qua,prd ( For ERP dev,qua,prd 1 logical comp, for PI dev,qua,prd 1 logical comp)
regarding your solution monitoring thing, have you assigned the logical component to your solution?chk the below
[https://websmp101.sap-ag.de/sapidb/011000358700001873212008E|https://websmp101.sap-ag.de/sapidb/011000358700001873212008E]
For your auto fill of created by,have you created BP for curresponding users in solman? and define the "Partner Determination Procedure" for the reporter as "User".(remove the old one as 'SAP Service : Determination via IBase/Ind. Object for Ref. Object Set' and set to user)
Please check and update
Thanks,
Jansi

System monitoring, open tasks are no longer visible in Tcode DSWP

Hello!
I have patched my Solution Manager with the newest support packages and have the problem with system monitoring, open tasks. All the systems have a long_sid.
I have implemented the SAP notes 1065285 and 1076772, but it was not sucessfull.
<b>As well as open tasks as system monitoring are no longer visible in the Tcode DSWP.</b>
Has some one the same problem or can help me to solve this problem?
Thank you very much
regards
Thom

Hello Thom,
did have a look at SAP Note 1038134?
If you are using Solution Mnager roles for System Monitoring the authorization check has changed and you need to maintain authorization object S_SOLM_ACT.
Best regards,
annett

DSWP - system monitoring/Administration - tasks not showing up

Hi all,
In our production system definition , in DSWP --> System Monitoring/Administration for our Production systems, for one prod system, the "Display Open Tasks" - the icon is not showing up. It has disappered???? We have daily tasks defined.
Any ideas????
Thanks, Neeta

HI,
The production satelleite system underwent a unicode & platform conversion and yesterday solution manager diagnostics for the production satellite system was set up - using solman_setup. Any of these changes could have caused this issue, but how?
As far as SMSY data, ADS is flagged as "relevant" in our D and Q system and the "open display tasks" icon is there and active.
WE looked at note 1478251 and we are at SAPKITL435.
I am not the task creator but am helping someone who is....
Anything else we can check?
Thanks, Neeta

Setup and configuration for system monitoring and IT Reporting for Java sys

Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
Neni

HI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help

System monitoring work center and CEN system

Hi everybody.
I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
Thanks for your answers!!
Fermí

Hi!
I've done finished this issue!
Please follow steps below:
1. Create activity type in T-Code: KL01
2. Go to KP26 to create the realtionship between Cost Center and Activity.
Now you can see new activity in Costing tab.
Regards!
Woody.

Multi-Monitor Environment and system switching

I was wondering if my Mac Pro would support this. I run my Mac Pro in a dual monitor setup and would like to on occasion peal off the 23" monitor for use with my Linux box so I do not have to put another monitor on my desk. What would happen if I switch my 23" monitor over to the Linux box on the fly. Will it freak out my Mac Pro or will it in essence think the 23" is still there or just revert to single monitor mode until the 23" returns.
I know this esoteric but as more and more people start using multi system workstations it becomes a concern.
Any ideas?

I've not found anything in Acrobat Help associated with configuration of multple monitor usage from within Acrobat.
You can select which monitor to use for full screen.
See: Edit > Preferences > Full Screen
If UltraMon does not provide the desired configuration setup then, perhaps, the OS might.
Be well...

Unable to find my system in Job and BI monitoring workcenter after configuring BPMon.

Dear Experts,
I had configured BPMon for background job monitoring, I had activated monitoring objects but could not see my system in Job and BI monitoring workcenter. Please provide some inputs on how to debug this.
Thanks,
Phani.

i see it this way, as long as the underlying existing call interface supports the existing database type it should be just working fine

Central Monitoring and System Monitoring Setup Guide

Hi,
I need to configure solution manager central monitoring and system monitoring, please advise where i can find the sap document regarding central monitoring and system monitoring for netweaver 7.0.
Thank You and Best Regards
Fernand Lesmana

Hi
please check below link
http://help.sap.com/saphelp_sm40/helpdata/en/0b/160419162a476380b5608e7f27a742/content.htm
regards,
Srinu

Setup Central System Administratin and Setup System Monitoring grayed out

When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring). The link does not work. However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16). I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue. I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception: In note 834534, page 4, it states that the configuration user should have SAP_ALL. However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected.
We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
Has anyone encountered this issue?

Hi,
Yes, This could be an authorization issue.
You are able to Setup Early Watch Alert because you may have the role
SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
Assign these roles, you wil be able to setup System Monitoring and Administration.
1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
2. SAP_SETUP_DSWP (full authorization for all setup sessions)
3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
Also check these roles:
SAP_OP_DSWP (full authorization for all Operations sessions)
SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
This is the authorization object D_SOL_VIEW used in these roles.
Regards,
Sanjai

Solution Managers System monitoring and CCMS/CEN

Hi.
Could anybody enlighten me on the Role of CCMS / CEN in the Solution manager Monitoring.
I have set up solution manager to Monitor my landscape. I have set up user defined limits and email alerts. These Alerts and the alerting agent - I assume - are carried out on the system being monitored.
Now the question - I want the Solution manager box to be the CEN and do the Alerting centrally (from the SM box) - Will the MTE's and Alerts that I have assigned and configured through System Monitoring use the properties set up though the CCMS?
I assume I will have to install the CCMS agents on all the target boxes - Will the Solution manager box process the Statics and send out the alerts from itself? If so How much workload does this place on the network and the box?
Why does the solution manager not act as the central processing and alerting box from the start? If we go through the effort of setting up the monitoring - why does it not set up Collection and Alerting at the same time?
Any feedback will be appreciated.
Thanks
Terry H.

Hi Terry,
Solution Manager System Monitoring is using CCMS infrastructure, so we have two different ways to collect data (alerts) from the satellite systems, first via CCMS agents as you mentioned or the option to use RFC destinations to read the alerts. This can be configured automatically by SMSY in Solution Manager. The second option produces higher network workload, because every alert will be checked every 3 minutes, with agents only new alert values will be pushed.
I hope this info helps you
Regards,
uDo

Need Analysis of my iPAD Network Application and Github System Monitor

iPad System Partial Information captured by Fingbox image link below
http://postimg.org/image/isn9r0owz/
http://postimg.org/image/e5cmbic6b/
http://s13.postimg.org/6o3ewamnb/image.jpg
GitHub Network Captured (System monitor ultimate application) image link below
http://s3.postimg.org/v6lenby9v/image.jpg
http://s3.postimg.org/k4gbow477/image.jpg
http://s3.postimg.org/69i16f9s3/image.jpg
http://s3.postimg.org/ikfl48l6r/image.jpg
Note: I don't use ddns nor remote applications.
Gateway Router: hitron cgn2-Rog configured with opendns.

Hello,
EXCLUDE=SCHEMA:"IN ('SYS','SYSTEM','OUTLN','PS','SYSADM','DBSNMP','PEOPLE','DIP','ORACLE_OCM','CSMIG','PSMON','PERFSTAT'"It seems that it lacks the right parenthesis on the above syntax.
According to the Note *1133013.1* of My Oracle Support, a wrong syntax of the EXCLUDE parameter may cause the error ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS* if you use IMPDB with a Network Link.
So you may correct the EXCLUDE parameter and try again.
Hope this help.
Best regards,
Jean-Valentin

System monitoring - DSWP and RZ21

Similar Messages

Maybe you are looking for