System Monitoring Issue.

Dears ,
We are using Solman 7.0,SP16 on Oracle 10.2.0.2.
We are configuring System Monitoring for our ECC5(DEV,QAS,PRD) landscape on it.
Now for it I added system in SMSY then assigned them in logical comp as per their role and then assigned that log comp to a solution.
Now when I goto DSWP->setup system monitoring...
It only show me producation server and its dialog instances there not my DEV and QAS server.
So my first question is
1--Do I have to create seprate solutions and seprate log comp to configure system monotoring for all servers.
2-In configuration there are some parameters like programme buffer whose threshold value it is not picking by defualt so when I go to metion in RZ21 there are some option like message class,method assignment about which I am not aware so please suggest how can I configure such type of parameters.
Shivam

Go to tx DSWP
Choose your solution
Go to Operation Setup (in left screen)
Go to Solution Settings (in right screen)
Choose tab "System Group"
You'll find your logical component with in it your systems, probably only your PRD is highlighted in green.
Go to change mode, right click the systems you want to add (QAS & DEV) and choose "put in solution".
Don't forget to save!
If all is well, all your systems should be visible when you want to setup system monitoring now.

Similar Messages

Central System Monitoring Issue

Dears,
I have configured system Monitoring but when i go in DSWP-> solution Monitring->System Monitoring.
Then after monitoring Daily tasks are getting done and get invisible from the list and get unavailable but but after performing monitoring of hourly tasks they are not not updating on main screen,neither their last execution time is changing nor they are getting invisible from task list.
Please suggest.
Shivam

Hi Lax,
Yes I am discussing about tasks.
As you told I am doing the same but daily tasks are getting invisible but not hourly and every 1 hour.
Even in Last Executed on coloumn also time is also not changing in hourly and every 1 hour tasks.
I also found two jobs SM:CSA UPDATE TASKSTATUS and SM:CSA SESSION REFRESH used for this purpose and they are running fine.
Please suggest.
Shivam
Edited by: Shivam Mittal on Jan 8, 2009 6:29 AM

Solman Setup system Monitoring alert threshold value for Filesystem issue

Hi,
Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
The same works fine for filessytems if target system OS is unix.
I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

Hi Sonal
when you want to save the thresholds for only the one MTE you set
you need to click on
EDIT
-> PROPERTIES
-> USE FOR INDIVIDUAL MTE
Kind Regards
Marius

System Monitoring / Administration asking for logon id

Each time I click on, "System Monitoring / Administration" in DSWP, a dialog box pops up asking me for a username and password. I've tried using the local system admin password, SAP*, my own SAP logon id, the J2EE_ADMIN user, etc.. but the dialog box just keeps popping back up. This doesn't happen under any other tab (i.e. Early Watch). If I hit cancel, I get the error below:
Logon failed
What has happened?
Call of URL http://sapsolman.mpfs.maines.net:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm terminated due to error in logon data.
Note
Logon performed in system SMS.
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:100-l:E-T:21-C:3-U:54-P:54-L:3
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Please tell me what I need to do to fix this authorization issue. Thank you.

Hi,
When it pops up for a logon details, please check below to which system is it connecting? Then the communication user which is being used in both the Managed and Managing system will be locked. After unlocking the user in the Managed system the issue will be resolved.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Nov 25, 2009 7:10 AM

Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

System Monitoring - Solman 7 EHP1

Hi
Solution Manager 7.0 EHP1 / Windows 2008 / Oracle
Satellite System R/3 Enterprise extn set 110 / Solaris on Sparc / Oracle
I am having trouble configuring System monitoring on solution Manager. Here is what I have done
Added the satellite system to SLD, Configured data collector (RZ70) in the satellite system, Pushed data from SLD to SMSYS (automatic transfer).
Installed CCMS agent + CCMSPING agent in satellite system. Checked connectivity in solman with RZ21. Connectivity is fine.
Created Monitor sets and monitors in CCMS for monitoring satellite system. Client data is visible in CCMS.
Created a solution in DSWP. Created logical component in SMSY. Assigned the logical component to the solution. Now I can see the data in DSWP.
Here are my questions
==================
1. In DSWP, everytime I have to view data, I have to click on "Setup System Monitoring" to view the alerts in the satellite system
I see a red alert reading for instance availability. Similarly,
In the system monitoring workcenter, I see the status of both the solution manager and the satellite system greyed out with a cross. When I move my mouse over it, it reads, no CCMSPING data available.
Any idea as to why this happens?
2. For what I see after I click on "Setup System Monitoring" I have parameters which I can configure. I see default values for these parameters. Is there like a recommendation or a template which can be used to setup these monitoring parameter values?
3. I have configured the ccmsping in the solution manager (for the solution manager) however the ccmsping service refuses to run. It throws a error reading "The system could not find the file specified". The ccmsping exe file is present in the location stated. Are there other files that this is looking for?
4. While registering the agent in the satellite system, I first registered with the CSMREG id. It failed with the message,
INFO: [SMG:040:CSMREG] connected to SMG, host sapsm.NA.XXX.NET, System Nr. 00, traceflag [ ]
INFO: SMG release is 701 , (kernel release 701 )
        RFC Error Info:
         message:
         status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
         intstat:
      Go Ahead anyway? n/[y] :
INFO: handling destination SAPCCM4X.SAPR3PR1.00
ERROR: can't register at SMG. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
RFC Error Info for SALF_CSM_AGENT_REGISTER
message:
status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
intstat:
I then did this with a dialog user. That worked. Agent was registered in solution manager. Any idea on why this error would show up with the CSMREG? I am concerned about issues which can come up when the password for the dialog user changes.
I am not sure how to upload screenshots of what i see, probably if i do that, it will be easy to relate to the issue which I am mentioning here. Is there a way I can do that?
Let me know if you need any more information from my side to understand this.
Ideas will be appreciated.
thanks
Ravi

Hello Ravi,
Additionally you will want to look at SAP Note 1175058 - Problems with CCMSPING in SAP Solution Manager, especially
c) Ensure that the message server host name in the monitoring options of CCMSPING and the message server of the corresponding main instance of the relevant system is the same in the SAP Solution Manager landscape
(SMSY). Important: The monitoring options of CCMSPING must not be configured using an IP address.
Regards,
Paul

System monitoring work center and CEN system

Hi everybody.
I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
Thanks for your answers!!
Fermí

Hi!
I've done finished this issue!
Please follow steps below:
1. Create activity type in T-Code: KL01
2. Go to KP26 to create the realtionship between Cost Center and Activity.
Now you can see new activity in Costing tab.
Regards!
Woody.

Short Dumps in System Monitoring

Hi!
I set up the system monitoring in SAP Solution Manager.
The most alerts I get from short Dumps.
In order to avoid this issue I would like to optimize the settings of short dumps.
Here my questions:
- Is it possible to set the threshold values behind short dumps
- If I switch off the short dumps is there some possibilities to be inform about frequency?
- Is there some other possibilities to optimize this issue?
Thank you very much!
regards
Thom

Hi Thom.
I think what you need is to setup in System Monitoring the threshold values for the following MTEs of the Satellite System:
Transaction RZ20 --> <Instance> --> R3Abap
This MTE has two attributes:
Shortdumps (MTE Class:R3AbapShortdumps)
Shortdumps Frequency (MTE Class:R3AbapShortdumpsFreq)
By clicking on the properties of one of each attribute you can setup the threshold for how many alerts you want to maintain (General Tab). In Performance tab you will be able to customize the threshold for the alerts.
Hope this helps
Antonio

My mac become so slow i can't use any app. All the time there is sound of hard drive but no swapping is reported by system monitor.

Hi Folks,
recently my Mac after latest upgrade of Maverics 10.9.2 degraded performance dramatically to the point that when I switch from one app to another i should wait 30-40 seconds to get the response back from the System. The Hard drive is in use each time I click a mouse button. Sounds like an excessive hard drive usage usually caused by swapping. But System monitor shows Free memory ) Swapping and plenty of Idle CPU.
I tried to find the Process that might over uses the disk but all appear to be Ok. i couldn't spot any process that would over use the IO.
IO looks normal from System Monitor.
I checked the Apple Support whenever it is a defected hard disk issue but according to serial this Mac is not under disk replacement program.
Any tips on what should I do to find the root cause?
Mac specifications:
27-inch Mid 2010
MEMORY 4GB 1333 MHZ DDR3
Software OS X 10.9.2 (13C64)
ATI Radeon HD 5750 1024 MB graphics
Intel 5 Series Chipset:
Vendor:          Intel
Product:          5 Series Chipset
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Physical Interconnect:          SATA
Description:          AHCI Version 1.30 Supported
ST31000528AS:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528AS
Revision:          AP25
Serial Number:                      9VP87BKN
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Thanks in advance
Emile

I have plenty of disk space 350 GB free.
I don't run excessive number of apps as you can see in top I have plenty of free Physical RAm plenty of idle CPU and IO is Ok too Swap is not in use means there is no lack of any resources
Even I f I quit all applications and use just safari the problem exists.
Processes: 174 total, 2 running, 6 stuck, 166 sleeping, 813 threads                                                11:35:05
Load Avg: 0.79, 0.78, 0.46 CPU usage: 0.47% user, 1.42% sys, 98.10% idle
SharedLibs: 134M resident, 0B data, 21M linkedit. MemRegions: 23450 total, 1500M resident, 121M private, 411M shared.
PhysMem: 3342M used (539M wired), 747M unused. VM: 418G vsize, 1310M framework vsize, 0(0) swapins, 0(0) swapouts.
Networks: packets: 25114/24M in, 16805/2740K out. Disks: 67293/2231M read, 15086/343M written.
I don't run any MAc keeper like apps nor antiviruses . I don't trust them. I f I need to clean something I will do it myself
Happens in switch between all apps even between the tabs in safari
The only symptom I have so far is noisy hard disk
each time i switch apps or windows I hear hard disk doing something.
Makes me think it might be hard disk problem but fsck doesn't show any issue
no bad secktors etc.
According to all diagnostics everything is Ok
That's kind of worries me not to be able to find the bottleneck having more than 20 years experience with UNIX

Solution Manager Setup System Monitoring DB Administrating Alerts

Greetings experts
Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
Satellite system (FSD) database MTE's are all active (RZ20).
Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
Service: Setup System Monitoring
Tree:
Setup System Monitoring
                       +--> SAP System FSD 1320011126
                                                         +--> Database FSD-DATABASE
|
                                                                                +--> Administrating DB FSD-DATABASE (DB2 6000)
Issue: DB Administrating Alerts do not display.
*Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
Regards
Peter Babbington

HI
1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to MTE class of satellite systems.
2. How do i configure this out of solution manager, and bypassing the satellite system?
You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
Also go through the links
http://service.sap.com/moniotring
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
Thanks
Prince Jose

RFC destinations for system monitoring could not be assigned

Hi,
I am having 2 system landscape DEV (DEV/QA), PRD. I want to monitor both system from Solution manager and created both system, db, server & logical component in SMSY.
Problems:
1. System not allowing to assign RFC for (PRD) system monitoring where as it is working for DEV system.
2. When running System monitoring setup only PRD is showing there, both server/system should be shown ?
3. When i am tring to assign system in RZ21 manully then also system giving error in case of PRD server. where as DEV system is created in RZ21 -->> Technical Infra. --->>> Display topology (Error when calling the underlying C function (function 'SALS_MS_GET_LOCAL_MS_INFO')
Message no. RA336)
Please help me to solve this issue.
Thanks & Regards,
Tejinder

Hello Arwel,
if the solution manager should monitor itself via EWA, you have to set "mySAP.com Support Workplace system" to "NONE". To get there, start transaction SDCC in you solution manager system -> Maintenance -> remote enviroment -> default target system.
Hope that will help you.
regards,
Marco

System Monitoring set up

Hi All,
I am using solution manager 7.0 on linux and DB2 and want to setup system monitor on solution manager 7.0.
But whn I goto DSWP->operation setup->system monitoring
I cant see "set- up system monitor" button under to start confiuring it.
Any idea why there is no button to start configuring ?????
Thanks

Hi,
Please check
Transaction: SMSY
Under Landscape Components-> Product Systems-> SAP CRM (Eg.)-> SID-> CRM Application Server-> Client
Select the client and then click on Check RFC Destinations button on top towards right. Then in the next screen select the check box Assign RFC Destination for System Monitoring and click on Check button and then Green tick mark.
After this also in transaction dswp Solution-> Solution Landscape->Solution Landscape Maintenance under System Group tab all the relevant Logical Components are assigned.
It should solve the issue.
Hope this helps.
Thanks,
Raghavendra.
Edited by: Raghavendra B Deshpande on Jun 16, 2010 5:10 AM

Setup Central System Administratin and Setup System Monitoring grayed out

When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring). The link does not work. However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16). I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue. I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception: In note 834534, page 4, it states that the configuration user should have SAP_ALL. However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected.
We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
Has anyone encountered this issue?

Hi,
Yes, This could be an authorization issue.
You are able to Setup Early Watch Alert because you may have the role
SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
Assign these roles, you wil be able to setup System Monitoring and Administration.
1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
2. SAP_SETUP_DSWP (full authorization for all setup sessions)
3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
Also check these roles:
SAP_OP_DSWP (full authorization for all Operations sessions)
SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
This is the authorization object D_SOL_VIEW used in these roles.
Regards,
Sanjai

Setup System Monitoring -- How to transfer Information J2EE

Hi Experts,
I got an issue trying to transfer information of satellite system (J2EE) to Solution Manager ->Operation Setup->Setup System Monitoring
I installed the ccmsr agent and tx RZ20 shows the information of the alerts, but I can see it in Setup System Monitoring.
On the other hand I added the systems in SMSY.
Regards.

In tx rz20 we have to copy the information of each MTE and select properties, then paste that in the third row (agent name) of the alert and save.

Copy Customizing for System Monitoring

Hello!
I am about to set up the system Monitoring for the different business systems.
I have seen there in Setup System Monitoring function "Copy Customizing"...
Can I copy the predefined Alerts or also the user defined such as from Tcode RZ20?
What is the procedure to copy the alerts from one system to the another?
Thank you very much!
regards!
Thom

Thank you!
I have got a realy good SAP Tutot regarding this issue..
regards

System Monitoring Issue.

Similar Messages

Maybe you are looking for