System Monitoring: SAPDB Monitoring via RZ20

Hi!
I would like to set up the SAP DB monitoring via RZ20.
Unfortunately if I start the tcode DB59 and try to enter there Assistant it takes very long and I am geting the following error:
Name and Server          : SRM - servername
BMRFC Function          : DBM_CONNECT
Error                         : Communication Error
Error Message            : Error when opening an RFC connection
Error DBMRfcCommuncicationError at DB Instance CreateObject
Message no. SADA009
When I am executing the tcode DB50 then I get the warning: Determining version data, and then I get the same error:
DB50
Name and Server     : SRM - servername
DBMRFC Function     : DBM_CONNECT
Error               : Communication Error
Error Message       : Error when opening an RFC connection
Can some one help with the solution of the problem?
Thank you!
regards
Thom

Hello Thom,
-> On what system you are going to set up the SAP DB monitoring?
-> What is the version of your database < SAP DB >?
-> What is the database of your system?
-> What is the version/SP of the SAP basis on your system?
-> Did you create the connection to the SAP DB in /ndb59?
    How did you do it?
A) Run /ndb59 -> click on "Integrate Database" =>
    select MAXD & give Name of Database Connection, for example, TEST
follow further & set::
Database name
Database Server
&& DBM user/password; Standard database user/password
In the Automatic Monitoring folder => check the Activate Alert Monitor
B) Run the Connection Test in /ndb59 for the TEST connection
=> let me know the results.
-> Please check that the MAXDB client software installed on the application server.
    See SAP notes:: 822239     FAQ: MaxDB Interfaces
                              822271     FAQ: SAP MaxDB client software
-> Please check that the DBSL < MAXDB> database dependent part of the
     SAP kernel software installed on the application server. See SAP note
     822239 for more details.
Thank you and best regards, Natalia Khlopina

Similar Messages

Setup Central System Administratin and Setup System Monitoring grayed out

When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring). The link does not work. However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16). I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue. I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception: In note 834534, page 4, it states that the configuration user should have SAP_ALL. However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected.
We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
Has anyone encountered this issue?

Hi,
Yes, This could be an authorization issue.
You are able to Setup Early Watch Alert because you may have the role
SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
Assign these roles, you wil be able to setup System Monitoring and Administration.
1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
2. SAP_SETUP_DSWP (full authorization for all setup sessions)
3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
Also check these roles:
SAP_OP_DSWP (full authorization for all Operations sessions)
SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
This is the authorization object D_SOL_VIEW used in these roles.
Regards,
Sanjai

System Monitoring Setup in Solution Manager

Hello Experts,
We are going to implement and configure Solution Manager - System monitoring setup for pre testing purpose
Currenly we have installed below SAP Systems
1.Solution Manager Server
2.ECC server (Without Ides) - Abap
3.CRM Server (Without Ides) -Abap + Java
We need to setup below tasks in Solution Manager
1.Early watch alert
2.System Monitoring
3.Central System Administration
4.Business Process Monitoring
5.Service Level reporting
1.Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
Could you please someone give input reg this.
Thanks
Thirumal
Edited by: Thiru Thirumal on Aug 6, 2008 4:56 AM
Edited by: Thiru Thirumal on Aug 6, 2008 4:57 AM

Hi,
Q. Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
A. Yes.
Check with links for
1.Early watch alert
This process helps you to identify potential problems early, avoid bottlenecks, and monitor the performance of your ABAP and JAVA systems and your most important business processes, regularly, automatically and effectively. The data collection infrastructure comprises the ABAP Service Data Control Center and the JAVA function module Data Provider. The SAP EarlyWatch Alert in the SAP Solution Manager is a service provided by SAP.
To be able to use it, you have:
maintained the non-ABAP systems correctly in the system landscape maintenance (transaction SMSY)
RFC u2013 Connections between: and an RFC u2013 Connections established.
your satellite systems and the SAP Solution Manager system
SAP Solution Manager and the SAP Service Marketplace
Solution Manager system and Solution Manager Diagnostics
Cf: Solution Manager IMG (transaction SPRO).
checked the availability of the tools required for the SAP Service sessions (add-on ST-A/PI), with the report RTCCTOOL.
activated Alert Monitoring and set-up the Automatic Session Manager (ASM) in the Service Data Control Center (SDCCN) of your satellite systems, for all SAP satellite systems and the central SAP Solution Manager of your solution
set-up your systems in a solution landscape in the SAP Solution Manager
configured Solution Manager Diagnostics
2.System Monitoring
The system monitoring in the SAP Solution Manager is, as described above, like a system-wide central CCMS. It can also contain the central CCMS (CEN) of satellite systems. These CENs can then monitor other components.
The graphical display in the SAP Solution Manager gives you access to the alerts of all systems in a solution. You can go to the local or central CCMS of the satellite systems.
The system proposes the most important alerts in the CCMS monitor collection, according to SAP experience, and their alert thresholds, for each system in the solution, in the system monitoring Session. You can activate or deactivate these alerts. The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager, overwriting the values in the local CCMS.
3.Central System Administration
You activate the customizing for business processes in your solution, in the Business Process MONITORING session in the SAP Solution Manager. A monitoring tree element (MTE), or a monitor collection, u201EBPMu201C of several monitoring objects, is created in the local or central (CEN) CCMS of the satellite system.
The data is collected for the monitoring types of the business process monitoring in contrast to system monitoring, as follows:
● The system collects performance (dialog transactions), posting cancellations (V1 and V2) and u201EOther CCMSu201C and interface data, in the local CCMS of the satellite systems.
● The system collects background processing, application list, application monitors, delivery lists, and document size data, in the central SAP Solution Manager CCMS.
The SAP Solution Manager system copies the data from the local CCMS.
The graphical display in the SAP Solution Manager simplifies access to the alerts for the business processes, business process steps or the interfaces between the systems in a solution. You can go to the local CCMS of the satellite systems.
The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager. These overwrite the values in the local CCMS.
4.Business Process Monitoring
The system and business process monitoring (including interface monitoring) in the SAP Solution Manager, both use the Computing Center Management System (CCMS) (transaction RZ20) architecture. This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions. You can also handle the alerts centrally, without having to go to the local CCMS of the satellite systems.
You can see the alerts from several systems in a solution landscape in the SAP Solution Manager, in a graphical overview, in contrast to the local CCMS of the SAP Solution Manager satellite systems. This is the view of a central CCMS (CEN). You can also monitor non-SAP systems in a central CCMS (CEN) of a satellite system
5.Service Level reporting
http://service.sap.com/solutionmanager for all solman tasks as given below.
http://www.asap.net.cn/homepage_en/Solution%20Manager%20EN.pdf
http://help.sap.com/saphelp_sm32/helpdata/en/1b/f02c41ab78f66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/9f/1f46570f8a4a268b3154e0e0f07280/content.htm
Regards,
Srini Nookala

CCMS System Monitoring: no new transaction window possible

Hello!
We successfully set up CCMS monitoring from SAP Solution Manager for the several satellite systems.
We also successfully set up the appropriate RFC trusted destination, so it possible to jump from SOLMAN tcode RZ20 into the transactions of satellite systems.
The problem is when jumping into satellite systems it is not possible to open a new transaction window (e.g. /odb13).
Within SM21 we can find errors with program SAPMYST.
Question:
What should be done to allow user after jump into satelite system to open a new transaction windows?
The both objects S_RFC and S_RFCACL are assigned to this user.

> When I jump to satellite system via RZ20 and type /odb13 , then nothing happens.
> The appropriate user who is jumped to satellite system has all necessary authorization (profile: SAP_ALL, SAP_NEW, as well objects S_RFC and S_RFCACL)
Please confirm, the user logged in has these authorizations in satellite system ? also let me know what happens when you execute db13 in satellite system direclty ( means you logged into the satellite system, not though solman).
Rajeev

Problem with T61 and DVI External Monitor (via Advanced Mini-Dock)

Ever since I upgraded to Vista SP1 on my ThinkPad T61 (with an Intel integrated 965 series graphics card), I've been having problems when I try to use an external monitor via the DVI port in my Advanced Mini-dock. I'm curious if other people have experienced this problem.
The problems surfaces when I first boot up, or sometimes after my ThinkPad has been running for awhile (particularly when I do something graphics related, such as right-clicking to open display properties). The picture starts to flicker (or disappear and reappear, like the screen does when changing graphics resolutions). I also hear the "ba-bum" sound that you hear when disconnecting a piece of hardware, followed by the "bum-ba" reconnection sound - these two sounds happen repeatedly (sometimes as fast as once per second). If I don't do anything, sometimes I'll get a bluescreen.
Not long ago, I found a fix of sorts: to stop the flickering/reconnecting, I just open Task Manager and stop the process called "igfxpers" (an Intel driver problem). The problem always disappears after I do this, although I have to remember to do it every time I reboot or else the problem comes back. So it's not an ideal fix.
This problem doesn't happen when I connect an external monitor using the analog VGA port, or when I'm just using the notebook LCD. It's limited to just the DVI connection. I've tried two different digital monitors (one LG, the other BenQ) as well as two DVI cables - the problem is still the same. So it seems like a driver problem of some sort - unfortunately, the Intel drivers haven't been updated since last February.
I should also note that I've tried reinstalling my OS two or three times, and the problem always comes back. Has anyone else had this problem, and is a fix on the way?

Error Message:
Input signal out of range. Translation:
You will see this on an otherwise blank screen. Assuming that the data cable is plugged in correctly, the video card is feeding the monitor a signal stream in excess of what the monitor can accommodate. The two main causes for this are that the user has set either the resolution or the vertical frequency rate too high. For example, you might set a new graphics card to display at 1,280 x 1,024, but if the monitor is only capable of 1,024 x 768 resolution, you’ll get a Sync Out of Range error. This is especially common in 14-inch monitors.
Solution:
Because you obviously can’t make settings changes from within regular Windows, you’ll need to reboot into Windows Safe Mode. When you restart the system, there is a point during boot up when the system switches from reporting diagnostics and detected components to loading Windows. This point is usually accompanied by a beep and the screen going black. Just before this point, you want to start repeatedly pressing the F8 key. This should bring up a menu of Windows boot options. The one you want to pick is Safe Mode.
From Safe Mode right-click the Desktop and select Properties. Go to the Settings tab and use the slider to drop your resolution a notch or two. Reboot and let Windows try to go into Normal mode. If this still doesn’t work, go back into Safe Mode and get to the Settings tab of Display Properties. Click the Advanced button, go to the Monitor tab, and check your refresh rate. The lowest advisable rate is usually 60Hz, although this works better for LCDs (liquid-crystal displays) than CRTs (cathode ray tubes). Apply the change and reboot.

System monitoring - alert email notification

Hello Sapers,
I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur. Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
Thank you very much for any help

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

System Monitoring in Solution Manager

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

MacBook Air no longer connecting to monitor via HDMI after recent update.

Hi all,
My MacBook air typically has no issues connecting to my external ASUS monitor via Thunderbol-HDMI port. However, after the recent Mavericks OSX update that was pushed a couple days ago, my monitor says that there is no signal. My MacBook air screen flickers slightly once connected (typical behavior, as it begins to mirror the screen on a scaled resolution shortly there after) but then nothing happens.
How can I fix this?
Thank you!

Welcome to Apple Discussions
Try System Preferences->Energy Saver:Automatic graphics switching (Deselect the checkbox).
If that doesn't work you might try changing the resolution and refresh rate for the monitor in System Preferences->Displays, or downloading an app called SwitchResX (shareware) and lowered the resolution just slightly .
One other solution if possible - restore to time before update from backup.
Added restore from backup advice
Message was edited by: themachead

Solution Manager System Monitoring for non SAP system

Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan Hung

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

SAP Mobile App System Monitoring = blank screen

Hi guys,
I encounter problems regarding System monitoring App on Android. I followed the instructions in SCN wiki to setup the gateway and ODATA to enable the monitoring via the mobile app on android.
My app connects to the gateway without any errors but did not show anything. The screen is just blank (see attached file). I have setup one technical monitoring in my solution manager 7.1 SP7 (to monitor the solution manager itself). Do you have any clue whats going wrong?
Best regards
Marco

Unfortunately I can't try solman_admin, because I'm getting the following while try to access the data:
"No authorization to access Service '/AIGW/TECHMON_0001'"
I try to connect with my user and receive some XML data. But something is strange. As far as I know, the URL prefix should be "sap/opu/odata/AIGW" but this doen't work in my case. If I try "sap/opu/odata/AIGW/TECHMON" something happens, but I see no data (blank screen). Service Name is set to "TECHMON". While I connect to this url via web browser, I get the following XML data:
<app:service xml:lang="de" xml:base="http://myservername.com:8000/sap/opu/odata/AIGW/TECHMON/"><app:workspace><atom:title type="text">Data</atom:title><app:collection sap:content-version="1" href="EventCollection"><atom:title type="text">EventCollection</atom:title><sap:member-title>Event</sap:member-title></app:collection><app:collection sap:content-version="1" href="AlertCollection"><atom:title type="text">AlertCollection</atom:title><sap:member-title>Alert</sap:member-title></app:collection><app:collection sap:content-version="1" href="AlertHeaderCollection"><atom:title type="text">AlertHeaderCollection</atom:title><sap:member-title>AlertHeader</sap:member-title></app:collection><app:collection sap:content-version="1" href="AlertDetailCollection"><atom:title type="text">AlertDetailCollection</atom:title><sap:member-title>AlertDetail</sap:member-title></app:collection><app:collection sap:content-version="1" href="MetricCollection"><atom:title type="text">MetricCollection</atom:title><sap:member-title>Metric</sap:member-title></app:collection><app:collection sap:content-version="1" href="FavouriteCollection"><atom:title type="text">FavouriteCollection</atom:title><sap:member-title>Favourite</sap:member-title></app:collection><app:collection sap:content-version="1" href="FavouriteWithRefreshCollection"><atom:title type="text">FavouriteWithRefreshCollection</atom:title><sap:member-title>FavouriteWithRefresh</sap:member-title></app:collection><app:collection sap:content-version="1" href="FavPOWLCollection"><atom:title type="text">FavPOWLCollection</atom:title><sap:member-title>FavPOWL</sap:member-title></app:collection><app:collection sap:content-version="1" href="TechSysListCollection"><atom:title type="text">TechSysListCollection</atom:title><sap:member-title>TechSysList</sap:member-title></app:collection><app:collection sap:content-version="1" href="FavoriteTSListCollection"><atom:title type="text">FavoriteTSListCollection</atom:title><sap:member-title>FavoriteTSList</sap:member-title></app:collection><app:collection sap:content-version="1" href="TechnicalSystemCollection"><atom:title type="text">TechnicalSystemCollection</atom:title><sap:member-title>TechnicalSystem</sap:member-title></app:collection><app:collection sap:content-version="1" href="ManagedObjectCollection"><atom:title type="text">ManagedObjectCollection</atom:title><sap:member-title>ManagedObject</sap:member-title></app:collection></app:workspace><atom:link rel="self" href="http://myservername.com:8000/sap/opu/odata/AIGW/TECHMON/"/><atom:link rel="latest-version" href="http://myservername.com:8000/sap/opu/odata/AIGW/TECHMON/"/></app:service>
Seems a bit to short in my opinion. The technical workcenter seems to be OK, there are no blank pages. Any suggestions?

Solman 7.0 : setup system monitoring

hi
I am taking an error while I want to configure the system monitoring in solman 7.0
solution monitoring-->sys monitoring --> setup sys monitoring
the CCMS Read Destination status is RED.but I have tested the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
have you got any idea ?
regards

hi
I have checked auth check via sm59 . it is failed.conn test is ok
the error is like this : "user or pass is not true"
what is your suggestions?
thanks in advance

System monitoring

Hello colleagues!
There is some trouble wich I can't resolve.
In customizing screen for productive system I can't setup database system monitoring - monitor statuses in solman are grey. When I go to my production server in RZ20 I see that my Database template is "inactive":
goto RZ20 > SAP CCMS Monitor Templates > Database > Doule click on "Backup" (for example) > get SID\Database\...\Backup\...: No method assigned
Also I see some difference in RZ20 of my test and productive instances.
These nodes are in productive system
Database
       Database
       Database Host Operating System
       R/3 DB Clients (Applicationservers)
And these are in test system:
Database
       Database
       Oracle
       Database Host Operating System
       R/3 DB Clients (Applicationservers)
       DataArchiving
But why I don't know...
Unfortunately I can't change these nodes because of they belong to SAP namespace.
Any help will be appriciated.
Artem

Dear Artem,
Does anybody know how to assing method in the following path?
Database > Database > Backup> BackupData (select) > click on button "Properties" > tab "Methods"?
Now I see in field "Data collection method" - "<NO_METHOD>" in prod. system.
In test system I see the same place "CCMS_ORA_space_tsp_all_ct"...
You can choose the methods form the Method assignment tab in Properties.
Choose Method Assignment -> goto data cloection method->form the Method allocation -> choose method name and the method form f4 help.
Hope this helps.
Regards,
Jagan

Automatic System Monitoring Reports

Hello Solution Manager Experts!
We already successfully set up System Monitoring for several SAP ERP and NetWeaver systems on SAP Solution Manager 7.1.
Now we would like to automatically send system monitoring/ IT Performance reports by e-mail to all the System Administrators. This should be done daily.
Does the new SAP Solution Manager 7.1 provide this function (generation of daily automatic Reports in background and sending these reports by e-mail)?
Any helpful information will be very appreciated
Kind regards

Hello,
You're welcome.
The prerequisites are: execute solman_setup entirely and execute the managed system configuration for the monitored host. These tasks includes the SMD Agent, which will communicate the system with Solution Manager.
Regarding RZ20 reports, as far as I know you have the actual IT performance reporting and, in a top level, the EarlyWatch Report.
As you may know, 7.1 presents a new infrastructure for Technical Monitoring and Alerting
It is the SAPu2019s new standard for central Monitoring and Alerting . The u201COldu201D System Monitoring work center based on central CCMS still available. You can do what you used to do with CCMS and also do even more with it, in a simpler way.
Best regards,
Guilherme
Edited by: Guilherme Balbinot on Oct 18, 2011 10:11 AM

Short Dumps in System Monitoring

Hi!
I set up the system monitoring in SAP Solution Manager.
The most alerts I get from short Dumps.
In order to avoid this issue I would like to optimize the settings of short dumps.
Here my questions:
- Is it possible to set the threshold values behind short dumps
- If I switch off the short dumps is there some possibilities to be inform about frequency?
- Is there some other possibilities to optimize this issue?
Thank you very much!
regards
Thom

Hi Thom.
I think what you need is to setup in System Monitoring the threshold values for the following MTEs of the Satellite System:
Transaction RZ20 --> <Instance> --> R3Abap
This MTE has two attributes:
Shortdumps (MTE Class:R3AbapShortdumps)
Shortdumps Frequency (MTE Class:R3AbapShortdumpsFreq)
By clicking on the properties of one of each attribute you can setup the threshold for how many alerts you want to maintain (General Tab). In Performance tab you will be able to customize the threshold for the alerts.
Hope this helps
Antonio

System Monitoring: SAPDB Monitoring via RZ20

Similar Messages

Maybe you are looking for