System Monitoring - Solman 7 EHP1

Hi
Solution Manager 7.0 EHP1 / Windows 2008 / Oracle
Satellite System R/3 Enterprise extn set 110 / Solaris on Sparc / Oracle
I am having trouble configuring System monitoring on solution Manager. Here is what I have done
Added the satellite system to SLD, Configured data collector (RZ70) in the satellite system, Pushed data from SLD to SMSYS (automatic transfer).
Installed CCMS agent + CCMSPING agent in satellite system. Checked connectivity in solman with RZ21. Connectivity is fine.
Created Monitor sets and monitors in CCMS for monitoring satellite system. Client data is visible in CCMS.
Created a solution in DSWP. Created logical component in SMSY. Assigned the logical component to the solution. Now I can see the data in DSWP.
Here are my questions
==================
1. In DSWP, everytime I have to view data, I have to click on "Setup System Monitoring" to view the alerts in the satellite system
I see a red alert reading for instance availability. Similarly,
In the system monitoring workcenter, I see the status of both the solution manager and the satellite system greyed out with a cross. When I move my mouse over it, it reads, no CCMSPING data available.
Any idea as to why this happens?
2. For what I see after I click on "Setup System Monitoring" I have parameters which I can configure. I see default values for these parameters. Is there like a recommendation or a template which can be used to setup these monitoring parameter values?
3. I have configured the ccmsping in the solution manager (for the solution manager) however the ccmsping service refuses to run. It throws a error reading "The system could not find the file specified". The ccmsping exe file is present in the location stated. Are there other files that this is looking for?
4.  While registering the agent in the satellite system, I first registered with the CSMREG id. It failed with the message,
INFO: [SMG:040:CSMREG] connected to SMG, host sapsm.NA.XXX.NET, System Nr. 00, traceflag [ ]
INFO: SMG release is 701 , (kernel release 701 )
        RFC Error Info:
         message:
         status:  EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
         intstat:
      Go Ahead anyway?  n/[y] :
INFO: handling destination SAPCCM4X.SAPR3PR1.00
ERROR: can't register at SMG. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
RFC Error Info for SALF_CSM_AGENT_REGISTER
message:
status:  EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
intstat:
I then did this with a dialog user. That worked. Agent was registered in solution manager. Any idea on why this error would show up with the CSMREG? I am concerned about issues which can come up when the password for the dialog user changes.
I am not sure how to upload screenshots of what i see, probably if i do that, it will be easy to relate to the issue which I am mentioning here. Is there a way I can do that?
Let me know if you need any more information from my side to understand this.
Ideas will be appreciated.
thanks
Ravi

Hello Ravi,
Additionally you will want to look at SAP Note 1175058 - Problems with CCMSPING in SAP Solution Manager, especially
c) Ensure that the message server host name in the monitoring options of CCMSPING and the message server of the corresponding main instance of the relevant system is the same in the SAP Solution Manager landscape
(SMSY). Important: The monitoring options of CCMSPING must not be configured using an IP address.
Regards,
Paul

Similar Messages

  • System Monitoring with Solution Manager Ehp1

    Hi,
    I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
    Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
    Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
    when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
    <SID>_RZ20_COLLECT
    <SID>_RZ20_ANALYZE
    I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
    <SID>_RZ20_COLLECT_123539Error when opening an RFC connection
    Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
    Error during remote call of SALC function: Error when opening an RFC connection
    Error during remote call of RFC1 function: Error when opening an RFC connection
    I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
    Please, Could you help me?
    Thanks and regards,
    Tomas.

    Tomas,
    I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system).  I downloaded the lates ccmsagent file from the market place based my target system configurations.
    Herewith attaching the logs while I'm trying to check the profile parameter.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
    ***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
    ***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
    ***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
    ***WARNING: Unexpected parameter: dbs/io_buf_size =100000
    ***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
    ***WARNING: Unexpected parameter: rsau/selector1/class =35
    ***WARNING: Unexpected parameter: rsau/selector1/severity =2
    ***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
    ***ERROR: Size of shared memory pool 40 too small
    ================================================================
    SOLUTIONS: (1) Locate shared memory segments outside of pool 40
                   with parameters like: ipc/shm_psize_<key> =0
    SOLUTION: Increase size of shared memory pool 40
              with parameter: ipc/shm_psize_40 =1472000000
    Shared memory disposition overview
    ================================================================
    Shared memory pools
    Key:   10  Pool
                Size configured.....:   642000000 ( 612.3 MB)
                Size min. estimated.:   637597428 ( 608.1 MB)
                Advised Size........:   640000000 ( 610.4 MB)
    Key:   40  Pool for database buffers
                Size configured.....:  1048000000 ( 999.4 MB)
                Size min. estimated.:  1468229308 (1400.2 MB)
                Advised Size........:  1472000000 (1403.8 MB)
    Shared memories inside of pool 10
    Key:        1  Size:        2500 (   0.0 MB) System administration
    Key:        4  Size:      523648 (   0.5 MB) statistic area
    Key:        7  Size:       14838 (   0.0 MB) Update task administration
    Key:        8  Size:    67108964 (  64.0 MB) Paging buffer
    Key:        9  Size:   134217828 ( 128.0 MB) Roll buffer
    Key:       11  Size:      500000 (   0.5 MB) Factory calender buffer
    Key:       12  Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
    Key:       13  Size:   200500000 ( 191.2 MB) Alert Area
    Key:       16  Size:       22400 (   0.0 MB) Semaphore activity monitoring
    Key:       17  Size:     2672386 (   2.5 MB) Roll administration
    Key:       30  Size:       37888 (   0.0 MB) Taskhandler runtime admin.
    Key:       31  Size:     4806000 (   4.6 MB) Dispatcher request queue
    Key:       33  Size:    39936000 (  38.1 MB) Table buffer, part.buffering
    Key:       34  Size:    20480000 (  19.5 MB) Enqueue table
    Key:       51  Size:     3200000 (   3.1 MB) Extended memory admin.
    Key:       52  Size:       40000 (   0.0 MB) Message Server buffer
    Key:       54  Size:    20488192 (  19.5 MB) Export/Import buffer
    Key:       55  Size:        8192 (   0.0 MB) Spool local printer+joblist
    Key:       57  Size:     1048576 (   1.0 MB) Profilparameter in shared mem
    Key:       58  Size:        4096 (   0.0 MB) Enqueue ID for reset
    Key:       62  Size:    85983232 (  82.0 MB) Memory pipes
    Shared memories inside of pool 40
    Key:        2  Size:    31168040 (  29.7 MB) Disp. administration tables
    Key:        3  Size:   114048000 ( 108.8 MB) Disp. communication areas
    Key:        6  Size:  1064960000 (1015.6 MB) ABAP program buffer
    Key:       14  Size:    28600000 (  27.3 MB) Presentation buffer
    Key:       19  Size:    90000000 (  85.8 MB) Table-buffer
    Key:       42  Size:    13920992 (  13.3 MB) DB TTAB buffer
    Key:       43  Size:    43422392 (  41.4 MB) DB FTAB buffer
    Key:       44  Size:     8606392 (   8.2 MB) DB IREC buffer
    Key:       45  Size:     6558392 (   6.3 MB) DB short nametab buffer
    Key:       46  Size:       20480 (   0.0 MB) DB sync table
    Key:       47  Size:    13313024 (  12.7 MB) DB CUA buffer
    Key:       48  Size:      300000 (   0.3 MB) Number range buffer
    Key:       49  Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
    Shared memories outside of pools
    Key:       18  Size:     1792100 (   1.7 MB) Paging adminitration
    Key:       41  Size:    25010000 (  23.9 MB) DB statistics buffer
    Key:       63  Size:      409600 (   0.4 MB) ICMAN shared memory
    Key:       64  Size:     4202496 (   4.0 MB) Online Text Repository Buf.
    Key:       65  Size:     4202496 (   4.0 MB) Export/Import Shared Memory
    Key:     1002  Size:      400000 (   0.4 MB) Performance monitoring V01.0
    Key: 58900130  Size:        4096 (   0.0 MB) SCSA area
    Nr of operating system shared memory segments: 9
    Shared memory resource requirements estimated
    ================================================================
    Nr of shared memory descriptors required for
    Extended Memory Management (unnamed mapped file).: 64
    Total Nr of shared segments required.....:         73
    System-imposed number of shared memories.:       1000
    Shared memory segment size required min..: 1472000000 (1403.8 MB)
    System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
    Swap space requirements estimated
    ================================================
    Shared memory....................: 2050.4 MB
    ..in pool 10  608.1 MB,   99% used
    ..in pool 40  999.4 MB,  140% used !!
    ..not in pool:   34.4 MB
    Processes........................:  716.8 MB
    Extended Memory .................: 8192.0 MB
    Total, minimum requirement.......: 10959.2 MB
    Process local heaps, worst case..: 1907.3 MB
    Total, worst case requirement....: 12866.5 MB
    Errors detected..................:    1
    Warnings detected................:    9
    After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
    Pls have a look at these two and let me know what could I do to proceed further.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
    INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
    INFO: Central Monitoring System is [SMP]. (found in config file)
          additional CENTRAL system y/[n] ?   :
    INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
    INFO:
          CCMS version  20040229, 64 bit, multithreaded, Non-Unicode
          compiled at   Jun 28 2010
          systemid      324 (IBM RS/6000 with AIX)
          relno         6400
          patch text    patch collection 2010/1, OSS note 1304480
          patchno       335
    INFO Runtime:
          running on    saptqa01 AIX 3 5 00069A8FD600
          running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO profile parameters:
          alert/MONI_SEGM_SIZE = 200000000
          alert/TRACE          = 1
          SAPSYSTEM            = 30
          SAPSYSTEMNAME        = TQA
          SAPLOCALHOST         = saptqa01
          DIR_CCMS             = /usr/sap/ccms
          DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
          DIR_PERF             = /usr/sap/tmp
    INFO:
          pid           4165682
    INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
    INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct  3 2008,  kernel 6400_20020600_254,  platform 324 (IBM RS/6000 with AIX)]
            segment status     ENABLED
            segment started at Tue Sep 14 09:35:56 2010
            segment version    20040229
    ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
           Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
           Please change configuration with profile parameters
               ipc/shm_psize_01 = -<different pool nr>
           xor
               ipc/shm_psize_13 = -<different pool nr>
    EXITING with code 1

  • Solman EHP1 upgrade Stack 20 - cannot log in to system

    Hi all,
    I am currently doing a patch of Stack 20 for solman EHP1.  I was able to create the queue, was able to continue until import proper phase 2. After a while, i cannot log on the system.
    CX_WB_ED_SYNTAX_ERROR is unknown. abap program SAPMSYST had to be terminated. status LIVE of the user interface SAPLSRABAX_EXC missing.
    also we found a deadlock in the ora alert trace file.
    here are the logs:
    SLOG0944.log
    ERROR SAPK-701DRINSAPBASIS SOL I 0012 20091027160822 SAPBASISUSER SAPBASIS     cbcsapsolm 20091027142413047  
    STOP  MAIN IMPORT          SOL I      20091027160831              SAPBASIS     cbcsapsolm 20091027142413047  
    ERROR: stopping on error 12 during MAIN IMPORT
    START INFORM SAP-SYSTEM OF SOL Q      20091027160831              SAPBASIS     cbcsapsolm 20091027142413047  
    START tp_getprots          SOL Q      20091027160831              SAPBASIS     cbcsapsolm 20091027142413047  
    WARNING: System SOL. Warning.        20091027161236 :
    WARNING:       Background job RDDIMPDP could not be started or terminated abnormally.
          Please check that the R/3 system is running.
          Please check the system. Use transactions SM21, SM37, SM50.
    WARNING:       (This warning is harmless if no further warnings follow.)
    WARNING: System SOL. Warning.        20091027170810 :
    ERROR:       The following call returned with exit code -100:
    ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=SOL
    ERROR:       Background jobs cannot be started.
    ERROR:       Please check trace file dev_evt.
    WARNING:       (This warning is harmless if no further warnings follow.)
    STOP  imp all              SOL   7006 20091027170857              SAPBASIS     cbcsapsolm 20091027142413047  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    dev_evt
    Tue Oct 27 17:08:08 2009
    Trace File of External Event Raiser (Level=2, Append=0)
    EventID: SAP_TRIGGER_RDDIMPDP
    SAP message server host: cbcsapsolm
    SAP message server service (new): 3900
    SAP message server service (old): sapmsSOL
    MsIAttachEx: connect to cbcsapsolm / 3900
    NiIInit: allocated nitab (2048 at 0000000002980080)
    NiHsLInit: alloc host/serv bufs (100/100 entries)
    NiPGetNodeAddrList: got 1 interface(s) from operating system
              [0] IP-Address: 172.20.20.128
    NiHsLGetNodeAddr: got hostname 'cbcsapsolm' from operating system
    HN='cbcsapsolm.cbcmain.cbc.chinabank.ph'; Add[0]=172.20.20.128
    NiIGetNodeAddr: hostname 'cbcsapsolm' = addr 172.20.20.128
    NiIGetServNo: servicename '3900' = port 0F.3C/3900
    NiICreateHandle: hdl 0 state NI_INITIAL
    NiIInitSocket: set default settings for new hdl 0 / sock 1812 (I4; ST)
    NiIBlockMode: set blockmode for hdl 0 FALSE
    NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
    NiIConnectSocket: hdl 0 is connecting to 172.20.20.128:3900 (timeout=5000)
    Tue Oct 27 17:08:09 2009
    SiPeekPendConn: connection of sock 1812 broke (10061-WSAECONNREFUSED: Connection refused)
    ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
    ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1812
        (SI_ECONN_REFUSE/10061; I4; ST; 172.20.20.128:3900) [nixxi.cpp    2835]
    NiICloseHandle: closing initial hdl 0
    ERROR => MsIAttachEx: NiBufConnect to cbcsapsolm/3900 failed (rc=NIECONN_REFUSED) [msxxi.c      652]
    ERROR ***: MsAttach (host=cbcsapsolm, serv=3900), rc = -100
    MsIAttachEx: connect to cbcsapsolm / sapmsSOL
    NiHsLGetNodeAddr: found hostname 'cbcsapsolm' in cache
    NiIGetNodeAddr: hostname 'cbcsapsolm' = addr 172.20.20.128
    NiHsLGetServNo: got service name 'sapmsSOL' from operating system
    SN='sapmsSOL'; Port=0E.10/3600; PC=tcp
    NiIGetServNo: servicename 'sapmsSOL' = port 0E.10/3600
    NiICreateHandle: hdl 0 state NI_INITIAL
    NiIInitSocket: set default settings for new hdl 0 / sock 1800 (I4; ST)
    NiIBlockMode: set blockmode for hdl 0 FALSE
    NiIConnectSocket: hdl 0 is connecting to 172.20.20.128:3600 (timeout=5000)
    Tue Oct 27 17:08:10 2009
    SiPeekPendConn: connection of sock 1800 broke (10061-WSAECONNREFUSED: Connection refused)
    NiHsLGetServName: found port number 0E.10/3600 in cache
    NiIGetServName: port 0E.10/3600 = servicename 'sapmsSOL'
    ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
    ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1800
        (SI_ECONN_REFUSE/10061; I4; ST; 172.20.20.128:3600) [nixxi.cpp    2835]
    NiICloseHandle: closing initial hdl 0
    ERROR => MsIAttachEx: NiBufConnect to cbcsapsolm/sapmsSOL failed (rc=NIECONN_REFUSED) [msxxi.c      652]
    ERROR ***: MsAttach (host=cbcsapsolm, serv=sapmsSOL), rc = -100
    alert_sol
    Tue Oct 27 16:08:17 2009
    ORA-00060: Deadlock detected. More info in file f:\oracle\sol\saptrace\usertrace\sol_ora_5280.trc.
    Tue Oct 27 16:08:20 2009
    Completed checkpoint up to RBA [0x5e7.2.10], SCN: 17756362
    Tue Oct 27 16:08:22 2009
    ORA-00060: Deadlock detected. More info in file f:\oracle\sol\saptrace\usertrace\sol_ora_188.trc.
    hope you can help!
    Many thanks!
    Edited by: Jeb Barrios on Oct 28, 2009 3:11 AM
    Edited by: Jeb Barrios on Oct 28, 2009 3:13 AM
    Edited by: Jeb Barrios on Oct 28, 2009 3:15 AM

    Hi,
    Based on my checks,  in my opinion its best to open an OSS msg, as most of the time it will require the message processor on SAP side to apply some internal tool to resolve this. Since it is a matter with package stuck scenario.
    You may want to open under BC-UPG-OCS
    Hope this helps.
    Cheers
    SH

  • System monitoring configuration in solution manager EHP1

    Hi all
    I am in a bit of fix
    We have upgraded our solution manager devlopment to EHP1
    Now I have added one system through SMSY in solution manager to configure system monitoring
    I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
    When I check my solution it is looking fine
    Now when I go within solution and click on the tab system monitoring
    It shows me on the left hand side -> Set up system monitoring
    when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
    I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
    Are there any activities that need to be done after upgrading to EHP1?
    Are there any services to be activated for system monitoring?
    Please advice
    Rohit

    I'm not 100% sure that it is necessary, but it won't hurt.
    Perhaps the essential adjustment you need for system monitoring is being done in there.
    It won't hurt

  • Solman 7.0 :  setup system monitoring

    hi
    I am taking an error while I want to configure the system monitoring in solman 7.0
    solution monitoring-->sys monitoring  --> setup sys monitoring
    the CCMS Read Destination status is RED.but I have tested  the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
    have you got any idea   ?
    regards

    hi
    I have checked auth check via sm59 .  it is failed.conn test is ok
    the error is like this : "user or pass is not true"
    what is your suggestions?
    thanks in advance

  • Solman Setup system Monitoring alert threshold value for Filesystem issue

    Hi,
    Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
    We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
    But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving  to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
    The same works fine for filessytems if target system OS is unix.
    I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

    Hi Sonal
    when you want to save the thresholds for only the one MTE you set
    you need to click on
    EDIT
    -> PROPERTIES
       -> USE FOR INDIVIDUAL MTE
    Kind Regards
    Marius

  • Configure System monitoring in SOLMAN

    Hi
    I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
    I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
    This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
    PS: SMSY is setup correctly, I can see my satellite system from there.
    any ideas on how to proceed will be appreciated.
    thanks
    ravi

    The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

  • Extracting Monitoring reports from J2EE system to SOLMAN

    Hi,
    I would like to monitor a J2EE system from Solution Manager system and obtain Some related reports from J2EE system to SOLMAN in order to analyze its performance.
    please  suggest me about the ideas to go about the same.
    Your inputs will help me a lot.
    Regards,
    Kaushik

    Hi,
              To monitor JAVA system on Solution Manager you need to install Solution Manager Diagnostic or Sitescope or CA Wily Introscope for your java system and after that you can configure your Java monitoring on Solution Manager.
              Please refer  Note 1107033 for CCMS config for java. 
    V....

  • SolMan 7.1: Unavailable data in system monitoring

    Hello experts,
    I have successfully configured system monitoring for our systems. Unfortunately there is only data available for some checks and not for all.
    Information is available for:
    - Technical system (Overall availability, Overall performance, Overall exception)
    - Technical instance (Overall performance)
    For all other points is no information available:
    - Technical system (overall configuration status)
    - Technical instance (overall availability, overall exception)
    - Database instance
    - Host
    The status is grey and data is not available.
    In the Unified landscape browser I have a green status for the SMD Agent and a red status for the Host. Maybe this is the problem?! But SAP Host Agent is started and updated to the latest version 7.20/91. Error:
    getVirtualizationConfiguration:Webservice port type not enabled (SAPHostAgent version:720:91)
    Failed to persist host <sap-host>. Check host status for details.
    Cannot create host '<sap-host>'
    Is Wily necessary for these tests? Initial and basic configuration is successfully, but I do not have installed Wily.
    Thanks, Basti

    Hi Basti
    It's worth a try, but perhabs it helps on your managed systems:
    1. Upgrade to latest Diagnostics Agent available
    2. Upgrade SAP Host Control to latest
    But most important thingy to try out is:
    3. Open Command Shell (su - <daa>adm under Unix, cmd.exe as user <daa>adm under windows)
    4. Go to /usr/sap/<DAA>/SMD<Inst.Nr>/scripts (for Windows accordingly using \ on correct installation drive)
    5. Execute "smdsetup hostagent state:on"
    Hope, this helps.
    Best regards, Michael

  • SOLMAN 7.1 Technical Monitoring - System Monitoring - Host Grey

    Hi All,
    Wondering why my host monitoring in system monitoring is greyed out? I managed to get Technical Systems, Database and others work well but not Host Monitoring.
    I checked SAPHOSTAGENT is running fine, DAA and wily as well. Also, all updated to latest version. Template assigned to Host monitoring as well. All troubleshooting and logs leaves no clue.
    Any idea as i've run out of ideas.....
    Cheers,
    Nicholas Chang

    Hi Roland,
    I did check and below are what it returns:
    Configuration XML 7.01.01.20120305075238 did not reach the agent. Agent XML: 
    No measured values have been reported by data provider. 
    No measured values were ever calculated.
    However, when i click on the "FIX" icon, nothing appears........
    I've changed the metric for "Host" managed object, assign and activate, rerun technical monitoring setting.
    i dont find any useful thread on SDN nor SMP. I've drill to landscape browser, agent log, daa log, extractor and etc but to no avail. However, i did get host info on Wily and E2E.... just wondering???
    Any clues?
    Thanks,
    Nicholas Chang

  • SolMan 7.1 System monitoring - Error

      Hello
    I have a problem with a few metrics in system monitoring.
    Now I have tried everything I've found on the internet and I have worked through several lines of evidence. Has everything but no avail.
    Maybe someone has a tip.
    Thanks and regards

    Please check:
    You can find more information under following link:
    http://wiki.scn.sap.com/wiki/display/TechOps/Monitoring+and+Alerting+rel
    ated+FAQ?original_fqdn=wiki.sdn.sap.com
    Thanks
    Vikram

  • Business Object system monitoring from SOLMAN

    Hi,
    We have recently installed SAP Business Objcts in a seprate system and  now we want to include this system in SOLMAN for early watch alerts.
    can any one provide the document/setps on how to include our Business Object system in SOLMAN.
    Thanks * Regards,
    KVR.

    Kasi
    I could not find any BO specific talks about SolMan and EWA in particular
    Did you already tried to add the system like a regular NW based system via SMSY? I guess you can use the regular procedure here
    Nesimi

  • System monitoring in solman 3.2

    Hi,
    We are having solution manager 3.2. We need to monitor R/3 server from solution manager system. Completed setting up of SMSY for R/3 server, tested RFC. Getting some issues on solution_manager transaction. Can anyone explain the steps of doing solution_manager(DSWP) transaction to enable the monitoring of CPU,memory etc.
    Thanks,

    It's hard to describe but I am trying do my best here.
    In DSWP transaction, click your solution, then Solution Monitoring and click Setup System Monitoring, it will bring you a screen so you can activate monitoring and define what you want to monitor and its criterias.
    CPU monitoring is defined under your server name
    Memnory Mngt is under your instance name.
    Thanks,
    Yujun Ran

  • Solution manager system monitoring configuration

    Hi
    I am configuring system monitoring in solution manager (Oracle / Solman 7.0 EHP1 / Windows 2008 / VM)
    I have added a satellite system to solution manager thru CCMS and CCMSPING agents. These are visible in RZ21 / Technical infrastructure / Overview. This has also been added in SMSY, SMSY when refreshed pulls out data from the satellite system. However I am having trouble with the transaction SOLUTION_MANAGER. This is where I setup system monitoring.
    Here I find the solution maanger system however am not able to find the satellite system which I had added.
    Thoughts?
    thanks
    Ravi

    Hi,
    Have you defined and added corresponding logical systems for the respective satellite systems?
    Here is the sequence of steps you've to do:
    in SMSY:
    1) Define server, DB, Systems
    2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
    3) define logical systems and assign the satellite system to it
    in Solution_Manager:
    1) define new solution
    2) add the logical system into the solution
    If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
    Have you already done these steps?
    After performing these steps:
    Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
    Your system will then appear.
    Does this help any way?

  • Solution manager : system monitoring setup

    Hi all,
    We are planning to move from a third party monitoring tool to SAP solution manager  we are Solman 7.0 with ehp1 .
    I am going thru docs  for system monitoring and follow the steps to active the systems  and observed Instance availability step , is it possibule to automate an  email when  the satelite system is unavailable?
    How do we automate an email for each alert  from  system monitoring ?
    Please suggest..
    Thanks,
    Subhash.G

    Hello Subhash,
    Check this guide for alert configuration .
    Solution Manager CEN and Alerting configuration guide for Dummies
    Hope it helps.
    Regards,
    Amit Barnawal

Maybe you are looking for

  • Program to send Purchase Order SmartForm by e-mail

    Hi, I need a program to send my Purchase Order SmartForm by e-mail. With the program I use, the output keeps appearing in my spool list in stead of in SOST... Does anyone have a sample code that I can use? I am working in a ECC 6.0 system. Package SM

  • Artist search is broken for MP3 files in iTunes 11?

    I am having a first world problem. I am using iTunes 11.01 on 2 Macs - an old 2006 iMac running 10.7.5, and a new MacBook Pro running 10.8.2. Both exhibit the same odd behavior. If I add new MP3 files to iTunes (such as tracks from Amazon), artist na

  • Applet read server prop

    Hello I cannot figure out how to get an applet, to read a simple properties file that is at the same directory level as the html/jsp file that loads it. I have tried below and it fails with fnf, even though if I put in the full url name in the browse

  • How do I go about upgrading to the latest software I am currently running 10.4.11

    I am currently running Mac os x 10.4.11, I would like to upgrade to the latest operating system, but from what I've been told I cant just jump to the current Lion. What is the most cost effective and smartest way to upgrade from my current Tiger to L

  • Schedule runtime scenario - RTW Availibilty-time Planning

    Hello all- Is there documentation on RTW Availibilty-time Planning? I want to learn options on daily, weekly scheduling of ID scenarios using RTW Availibilty-time Planning. (similar to SM36 TCODE in SAP) How to schedule outbound IDOC and HTTP scenari