System Monitoring using NetFlow.

Hi,
I should implement a monitoring system for network security.
Analyzes network traffic capturing Netflow, by the network devices, for security purposes.
I wanted to know if I use netflow v5 full coverage of network security, or there are significant bugs, because not all network devices supports netflow v9.
Thanks.

Hi Naresh,
It actually depends on your client strategy, how you are trying to collect your third party to SAP.
1) Can we push monitoring data from third party systems to ECC which can be psuhed to Solman by some means and viewed from Solman. How can we achieved this?
i am not sure any standard way you can do this, typically you need to have interface to connect the third party to SAP and feed data to SAP. this interface should be given by 3rd party itself. even if it reached to ECC also how do you map this content as third party? if it pushed to CCMS MTE of ECC, then you can monitor this with latest Technical monitoring of solution manager 7.1 MAI.
2) Installing Diagnostics Agent and SAPHostAgent on the third party system and configuring it in Solman.
This is the feasible way, there are lots of SAP guided doc for this,again the metrics for monitoring is depends on 3rd party and we have few BPMon Key figures for non abap
please check out Setup BPMon for Non ABAP
and Technical Monitoring for Non SAP
Please check.
Thanks
Jansi

Similar Messages

How to setup the system monitoring using sol man ?

Experts
can any one advise me how to setup the below monitoing.
Background jobs (SM50)         - Long running jobs >24hrs
Email/Fax transmission(SCOT) - alert if there is any failire/errors in the email transmission
iDocs Processing(WE05)          - Data Transfer failure
Enque locks (SM12)         - alert if there are any Lock entries which are older than 2 days
Update Records(SM13)         - alert if there are any update request older than 90 days
Regards
Karthi

Hello Prasad
Thanks a lot your information. I wil go thorugh the documents which you have mentioned.
I have configured few alerts and unfortunately I am still struggling to configure these alerts. I am also not able find whether I will be able to configure these alerts are not. Any advice/tip would be a great help.
if I get some solution, definately I will share with all.
Regards
Karthi

System Monitoring in Solution Manager

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Solution Managers System monitoring and CCMS/CEN

Hi.
Could anybody enlighten me on the Role of CCMS / CEN in the Solution manager Monitoring.
I have set up solution manager to Monitor my landscape. I have set up user defined limits and email alerts. These Alerts and the alerting agent - I assume - are carried out on the system being monitored.
Now the question - I want the Solution manager box to be the CEN and do the Alerting centrally (from the SM box) - Will the MTE's and Alerts that I have assigned and configured through System Monitoring use the properties set up though the CCMS?
I assume I will have to install the CCMS agents on all the target boxes - Will the Solution manager box process the Statics and send out the alerts from itself? If so How much workload does this place on the network and the box?
Why does the solution manager not act as the central processing and alerting box from the start? If we go through the effort of setting up the monitoring - why does it not set up Collection and Alerting at the same time?
Any feedback will be appreciated.
Thanks
Terry H.

Hi Terry,
Solution Manager System Monitoring is using CCMS infrastructure, so we have two different ways to collect data (alerts) from the satellite systems, first via CCMS agents as you mentioned or the option to use RFC destinations to read the alerts. This can be configured automatically by SMSY in Solution Manager. The second option produces higher network workload, because every alert will be checked every 3 minutes, with agents only new alert values will be pushed.
I hope this info helps you
Regards,
uDo

System Monitoring and CCMS Monitors

In our production environment we have working CCMS Monitors set up thru RZ20.
However if I go to solution_manager->system monitoring->operations tab, there are no alerts displayed on the page. Does system monitoring use the same backend as CCMS Monitoring? I am a little bit confused on this. If we set up System Monitoring, will this duplicate the CCMS Monitors we've previously set up?

If you want to see alerts on Operation tab in solution_manager->Solution Monitoring->System Monitoring you first need to run "Setup System Monitoring" (link is just below tab Operation or run in from Operations Setup tab). Setup will not duplicate CCMS monitors. It will just mark which of the available alerts should be taken into account for solution_manager->Solution Monitoring->System Monitoring report.
This might help you to start:
http://help.sap.com/saphelp_smehp1/helpdata/en/5b/0c9ccfd262427685c245d7ea85cd7a/content.htm

Gnome-system-monitor mislabels root partition

Since the recent Gnome 2.30.2 upgrades the other day, Gnome System Monitor has oddly started mislabeling my root partition in the "file systems" tab. Every other partition is labeled as "/dev/sda2," "/dev/sda5," etc. But my root partition is labeled "/dev/disk/by-uuid/42d32269-85ca-4567-a3ha-71hj8e0f7838." So the mode of labeling is not consistent, using one type of label for every partition and another type just for my root partition.
The problem with this is that the columns are automatically resized to fit the entire length of the uuid label, pushing information I want to see off screen and forcing me to scroll over to see it or resize the window or or resize the column every time, etc..
I see that the gnome-system-monitor package is still at 2.28.1, so it wasn't upgraded. What could cause this? It's an annoying bug and was not a problem before I did the 2.30.2 upgrades yesterday. I also notice that the Gnome Disk Utility and Gparted do not do this; they label my root partition /dev/sda1.
Last edited by cb474 (2010-06-24 05:09:31)

gnome-system-monitor uses libgnomesu for this. It's a library that does the same things as sudo does.

Gnome-system-monitor not getting decorated properly (openbox)

If I run gnome-system-monitor it doesn't get decorated properly.
This is the terminal output:
gnome-system-monitor
(gnome-system-monitor:3789): Gtk-WARNING **: Theme directory scalable/places/22 of theme black-white_2-Neon has no size field
(gnome-system-monitor:3789): Wnck-WARNING **: Unhandled action type _OB_WM_ACTION_UNDECORATE
(gnome-system-monitor:3789): Wnck-WARNING **: Unhandled action type _OB_WM_ACTION_UNDECORATE
(gnome-system-monitor:3789): Wnck-WARNING **: Unhandled action type _OB_WM_ACTION_UNDECORATE
(gnome-system-monitor:3789): Wnck-WARNING **: Unhandled action type _OB_WM_ACTION_UNDECORATE
(gnome-system-monitor:3789): Wnck-WARNING **: Unhandled action type _OB_WM_ACTION_UNDECORATE
(gnome-system-monitor:3789): Wnck-WARNING **: Unhandled action type _OB_WM_ACTION_UNDECORATE
And here is a screenshot:
It just draws the titlebar as omni-transparent, takes whatever is beneath it at the moment it spawns and just gets garbled as soon as I move it.

gnome-system-monitor uses libgnomesu for this. It's a library that does the same things as sudo does.

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

My mac become so slow i can't use any app. All the time there is sound of hard drive but no swapping is reported by system monitor.

Hi Folks,
recently my Mac after latest upgrade of Maverics 10.9.2 degraded performance dramatically to the point that when I switch from one app to another i should wait 30-40 seconds to get the response back from the System. The Hard drive is in use each time I click a mouse button. Sounds like an excessive hard drive usage usually caused by swapping. But System monitor shows Free memory ) Swapping and plenty of Idle CPU.
I tried to find the Process that might over uses the disk but all appear to be Ok. i couldn't spot any process that would over use the IO.
IO looks normal from System Monitor.
I checked the Apple Support whenever it is a defected hard disk issue but according to serial this Mac is not under disk replacement program.
Any tips on what should I do to find the root cause?
Mac specifications:
27-inch Mid 2010
MEMORY 4GB 1333 MHZ DDR3
Software OS X 10.9.2 (13C64)
ATI Radeon HD 5750 1024 MB graphics
Intel 5 Series Chipset:
Vendor:          Intel
Product:          5 Series Chipset
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Physical Interconnect:          SATA
Description:          AHCI Version 1.30 Supported
ST31000528AS:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528AS
Revision:          AP25
Serial Number:                      9VP87BKN
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Thanks in advance
Emile

I have plenty of disk space 350 GB free.
I don't run excessive number of apps as you can see in top I have plenty of free Physical RAm plenty of idle CPU and IO is Ok too Swap is not in use means there is no lack of any resources
Even I f I quit all applications and use just safari the problem exists.
Processes: 174 total, 2 running, 6 stuck, 166 sleeping, 813 threads                                                11:35:05
Load Avg: 0.79, 0.78, 0.46 CPU usage: 0.47% user, 1.42% sys, 98.10% idle
SharedLibs: 134M resident, 0B data, 21M linkedit. MemRegions: 23450 total, 1500M resident, 121M private, 411M shared.
PhysMem: 3342M used (539M wired), 747M unused. VM: 418G vsize, 1310M framework vsize, 0(0) swapins, 0(0) swapouts.
Networks: packets: 25114/24M in, 16805/2740K out. Disks: 67293/2231M read, 15086/343M written.
I don't run any MAc keeper like apps nor antiviruses . I don't trust them. I f I need to clean something I will do it myself
Happens in switch between all apps even between the tabs in safari
The only symptom I have so far is noisy hard disk
each time i switch apps or windows I hear hard disk doing something.
Makes me think it might be hard disk problem but fsck doesn't show any issue
no bad secktors etc.
According to all diagnostics everything is Ok
That's kind of worries me not to be able to find the bottleneck having more than 20 years experience with UNIX

How do i add Linux systems to be monitored using Virtual agent/SNMP in OLT?

Dear All,
I need to know the process to add Linux systems to be monitored using Virtual agent and SNMP in OLT ?
I have added my details to Virtual agent and chosen ssh and all i get is cannot connect
Appreciate if someone can give me the detailed screenshot by screenshot process.
Regards
Praveen

On 05/13/2010 09:30 AM, Raja Vengala wrote:
>
Yes, the problem is with the old packaged PLINK.exe. Downloaded version is working smoothly. Any reason for shipping the old version ??
From: Mikael Fries
Sent: Wednesday, May 12, 2010 11:56 PM
To: Praveen Arora; Drupad Panchal; Matthew Demeusy; Ashish Dave; Raja Vengala
Subject: RE: OLT Linux system moniting issue
Praveen
I have set up LINUX and virtual agent configs a couple of times, and it has worked pretty ok.
What I found was that you might have to download a newer version of PLINK.exe and put that onto your OLT system.
(with the packaged version, I also had some communication issues)
Try to download the lates plink.exe and see if that works…
(you may want to restart you system after replacing plink.exe)

In system monitoring, CCMS absolete now ? or we still use it ?

Hi Seniors, I have a doubt in system monitoring. Now Solution manager is used for system monitoring. So is CCMS absolete now ? or we still use it ? Could you please clariy this. Thank you, Sri

Mr Sri
Solution manager can be used for central system monitoring and this still uses the ccms data of monitored system to monitor centrally. CCMS can still be used to monitor your system locally.This way CCMS is not obsolete.
If the concept is cleared pls award points.
Regards
IMAD

CCMS is used for system monitoring , why should we use solution manage ?

CCMS is used for system monitoring , why should we use solution manage ?
Whats the relationship between CCMS system and SolMan?
Thank you .

hi,
I just want to ask a question. At our client we have solution manager and CCMS. There is data in CCMS I can extract, it is loading on BW side ok the same number of recs, but the problem on CCMS cubes says there are the same number of record in the cube and also showing as the data is ready for the reporting. But when I run the report and view the data as listcube it is empty.
ANy of you have the situation like this cube say it has the data but when do th BEX or infocube contents the cube is empty nothing in there. The same thing is happening with hourly, 15 minute and daily cubes.
Anyhelp on this matter is appreciated

Gnome-system-monitor (dark remix) 4 those using dark themes

hey fellow archers,
I'm a guy who digs dark themes, i am also someone who uses Gnome. Something that has irritated me for years is gnome-system-monitor ~ specifically, when using a dark theme. those white graphs (CPU graph), are just brutal. At work, i use CentOS on a couple of machines, while i don't use gnome with a server (obviously..lol) i have usedf CentOS with gnome before and had made note of the fact that it had a dark graph, and no ugly highlight bar in the 'system' tab, which was a little bit nicer on the eyes.
well, today i decided to fix the default colors for that graph, and i also decided to remove the stupid cairo-gradient that greets you in the 'system' tab. i did this because i prefer a nice graphic, over having a plain gnome logo, and a tacky gradient, it just doesn't need to be there.
here is what it looks like;
here is my gitorious branch where the sources are available;
git clone git://gitorious.org/gnome-system-monitor-blackgtk3/gnome-system-monitor-blackgtk3.git
you all use archlinux, so i need not explain how to compile it and this is gnome-system-monitor 3.1.4 (development) but i have not noticed any bugs whatsoever.
I am thinking of making a pkgbuild for AUR, that would pull from Gnome's git repo, and then apply a patch. Currently i have 2 roughed out patches (that work), but i have no experience writing patches, or even making pkgbuilds. if you are interested here is what i have got;
1. black-graph.patch
--- /home/ninez/Desktop/gnome-system-monitor/src/load-graph.cpp 2011-08-18 19:58:21.443838034 -0400
+++ /home/ninez/Desktop/gnome-system-monitor-3.1.4-NINEZ/src/load-graph.cpp 2011-08-18 19:50:24.000000000 -0400
@@ -76,7 +76,7 @@
cairo_text_extents_t extents;
num_bars = graph->num_bars();
- graph->graph_dely = (graph->draw_height - 15) / num_bars; /* round to int to avoid AA blur */
+ graph->graph_dely = (graph->draw_height - 8) / num_bars; /* round to int to avoid AA blur */
graph->real_draw_height = graph->graph_dely * num_bars;
graph->graph_delx = (graph->draw_width - 2.0 - graph->rmargin - graph->indent) / (LoadGraph::NUM_POINTS - 3);
graph->graph_buffer_offset = (int) (1.5 * graph->graph_delx) + FRAME_WIDTH ;
@@ -88,66 +88,67 @@
allocation.height);
cr = cairo_create (graph->background);
- // set the background colour
+ // set the background colour - cairo_set_source_rgb = outside of graph
GtkStyle *style = gtk_widget_get_style (ProcData::get_instance()->notebook);
- gdk_cairo_set_source_color (cr, &style->bg[GTK_STATE_NORMAL]);
+ gdk_cairo_set_source_color (cr, &style->bg[0, 0, 1, 1]);
+ cairo_set_source_rgb (cr, 0.10, 0.10, 0.10);
cairo_paint (cr);
/* draw frame */
cairo_translate (cr, FRAME_WIDTH, FRAME_WIDTH);
- /* Draw background rectangle */
- cairo_set_source_rgb (cr, 1.0, 1.0, 1.0);
- cairo_rectangle (cr, graph->rmargin + graph->indent, 0,
+ /* Draw background rectangle - inside graph */
+ cairo_set_source_rgb (cr, 0.10, 0.10, 0.10);
+ cairo_rectangle (cr, graph->rmargin + graph->indent, 1,
graph->draw_width - graph->rmargin - graph->indent, graph->real_draw_height);
cairo_fill(cr);
- cairo_set_line_width (cr, 1.0);
- cairo_set_dash (cr, dash, 2, 0);
+ cairo_set_line_width (cr, 2.0);
+ cairo_set_dash (cr, dash, 2, 1);
cairo_set_font_size (cr, graph->fontsize);
for (i = 0; i <= num_bars; ++i) {
double y;
if (i == 0)
- y = 0.5 + graph->fontsize / 2.0;
+ y = 0.5 + graph->fontsize / 3.0;
else if (i == num_bars)
y = i * graph->graph_dely + 0.5;
else
- y = i * graph->graph_dely + graph->fontsize / 2.0;
+ y = i * graph->graph_dely + graph->fontsize / 4.0;
- gdk_cairo_set_source_color (cr, &style->fg[GTK_STATE_NORMAL]);
+ gdk_cairo_set_source_color (cr, &style->fg[1]);
if (graph->type == LOAD_GRAPH_NET) {
// operation orders matters so it's 0 if i == num_bars
unsigned rate = graph->net.max - (i * graph->net.max / num_bars);
const std::string caption(procman::format_network_rate(rate, graph->net.max));
cairo_text_extents (cr, caption.c_str(), &extents);
- cairo_move_to (cr, graph->indent - extents.width + 20, y);
+ cairo_move_to (cr, graph->indent - extents.width + 40, y);
cairo_show_text (cr, caption.c_str());
} else {
// operation orders matters so it's 0 if i == num_bars
caption = g_strdup_printf("%d %%", 100 - i * (100 / num_bars));
cairo_text_extents (cr, caption, &extents);
- cairo_move_to (cr, graph->indent - extents.width + 20, y);
+ cairo_move_to (cr, graph->indent - extents.width + 40, y);
cairo_show_text (cr, caption);
g_free (caption);
- cairo_set_source_rgba (cr, 0, 0, 0, 0.75);
+ cairo_set_source_rgba (cr, 0.7, 0.7, 0.7, 0.70);
cairo_move_to (cr, graph->rmargin + graph->indent - 3, i * graph->graph_dely + 0.5);
cairo_line_to (cr, graph->draw_width - 0.5, i * graph->graph_dely + 0.5);
cairo_stroke (cr);
- cairo_set_dash (cr, dash, 2, 1.5);
+ cairo_set_dash (cr, dash, 2, 0.20);
const unsigned total_seconds = graph->speed * (LoadGraph::NUM_POINTS - 2) / 1000;
for (unsigned int i = 0; i < 7; i++) {
double x = (i) * (graph->draw_width - graph->rmargin - graph->indent) / 6;
- cairo_set_source_rgba (cr, 0, 0, 0, 0.75);
- cairo_move_to (cr, (ceil(x) + 0.5) + graph->rmargin + graph->indent, 0.5);
- cairo_line_to (cr, (ceil(x) + 0.5) + graph->rmargin + graph->indent, graph->real_draw_height + 4.5);
+ cairo_set_source_rgba (cr, 0.7, 0.7, 0.7, 0.75);
+ cairo_move_to (cr, (ceil(x) + 0.3) + graph->rmargin + graph->indent, 0.3);
+ cairo_line_to (cr, (ceil(x) + 0.3) + graph->rmargin + graph->indent, graph->real_draw_height + 4.5);
cairo_stroke(cr);
unsigned seconds = total_seconds - i * total_seconds / 6;
const char* format;
@@ -158,7 +159,7 @@
caption = g_strdup_printf(format, seconds);
cairo_text_extents (cr, caption, &extents);
cairo_move_to (cr, ((ceil(x) + 0.5) + graph->rmargin + graph->indent) - (extents.width/2), graph->draw_height);
- gdk_cairo_set_source_color (cr, &style->fg[GTK_STATE_NORMAL]);
+ gdk_cairo_set_source_color (cr, &style->fg[1]);
cairo_show_text (cr, caption);
g_free (caption);
@@ -226,20 +227,20 @@
/* Subframe offset */
x_offset += graph->rmargin - ((sample_width / graph->frames_per_unit) * graph->render_counter);
- /* draw the graph */
+ /* draw the graph - LINE WIDTH 3 */
cairo_t* cr;
cr = gdk_cairo_create (window);
- cairo_set_line_width (cr, 1);
+ cairo_set_line_width (cr, 2);
cairo_set_line_cap (cr, CAIRO_LINE_CAP_ROUND);
cairo_set_line_join (cr, CAIRO_LINE_JOIN_ROUND);
- cairo_rectangle (cr, graph->rmargin + graph->indent + FRAME_WIDTH + 1, FRAME_WIDTH - 1,
+ cairo_rectangle (cr, graph->rmargin + graph->indent + FRAME_WIDTH + 2, FRAME_WIDTH - 2,
graph->draw_width - graph->rmargin - graph->indent - 1, graph->real_draw_height + FRAME_WIDTH - 1);
cairo_clip(cr);
for (j = 0; j < graph->n; ++j) {
- cairo_move_to (cr, x_offset, (1.0f - graph->data[0][j]) * graph->real_draw_height);
+ cairo_move_to (cr, x_offset, (1.0f - graph->data[1][j]) * graph->real_draw_height);
gdk_cairo_set_source_color (cr, &(graph->colors [j]));
for (i = 1; i < LoadGraph::NUM_POINTS; ++i) {
2. no-highlight.patch
--- /home/ninez/Desktop/gnome-system-monitor/src/sysinfo.cpp 2011-08-18 19:58:21.443838034 -0400
+++ /home/ninez/Desktop/gnome-system-monitor-3.1.4-NINEZ/src/sysinfo.cpp 2011-08-18 16:03:52.000000000 -0400
@@ -477,7 +477,7 @@
style->base[GTK_STATE_SELECTED].green / 65535.0,
style->base[GTK_STATE_SELECTED].blue / 65535.0,
1.0);
- cairo_pattern_add_color_stop_rgba(cp, 1.0,
+ cairo_pattern_add_color_stop_rgba(cp, 0.0,
style->base[GTK_STATE_SELECTED].red / 65535.0,
style->base[GTK_STATE_SELECTED].green / 65535.0,
style->base[GTK_STATE_SELECTED].blue / 65535.0,
EDIT: if you noticed the RGBA transparency where the icons are, that isn't a bug or something being misdrawn. My gtk3 theme is partially RGBA (in compiz only, not gnome-shell/mutter). the theme is 'Marples-black' found here;
http://gnome-look.org/content/show.php?content=144240
last note: My branch is only for the short term, until i get things sorted out. i also wanted to make the sources available to anyone, on any distro. so , it was easist to just quickly setup a branch, that anyone can pull from.
cheerz
Last edited by triplesquarednine (2011-08-19 03:58:42)

triplesquarednine wrote:
dodo3773 wrote:Yeah, if it wasn't for dark themes / stylish I would probably be blind by now ha ha ha. Have you though about putting it in the aur? Maybe calling it gnome-system-monitor-dark or something?
I spend way too much time both at work/home in front of a computer. dark is the way to go. so much more relaxed on the eyes.
Yes, i have (thought about putting it into AUR). in the short term it was just quicker to throw it up on my gitorious though. As i said above, i haven't really made too many patches, and i currently only maintain one package in AUR, so i have a little reading to do, first. that's also why i posted my patches. in case someone has something to point out, aside from the obvious thing - which is that i need to modify the first part of the patch, as i can ditch a 1st couple directories ...
Ideally, it will end up in AUR... But, i will probably also have my gitorious branch sync'd to gnome's branch, and i will create a patch using GIT to maintain my branch ~ so that people outside the Arch community, can have easy access too. plus, who knows, i may change around some other things as well. in the 3-4 hours i have been using this 'mod', i am way happier than with the upstream version.
cheerz
Right on. Looking forward to further development. I will stay posted (subscribed to thread).

TS1926 "Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this

"Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this issue?

Try this app: http://tyorex.com/iWorkConverter
Batch convert Pages files to doc and pdf.

Qosmio G35-av600: How to use the internal display as a monitor using composite-in?

I want to hook up my video game system and use my laptop monitor, but I can not figure out how to change the settings so that my monitor displays the video game? Composite in settings?
I have a G35-av600 purchased last june. If anyone has any suggestions, let me know

Hi
Im not sure if I can help you because I know only something about the Qosmio G10 and G20 and your Qosmio seems to be a US notebook but I will try my best ;)
On the Qosmio G10 for example you have to change the input settings in the Toshiba picture enhancement utility but I assume you dont have this tool preinstalled.
But I think the composite in is a right jack to built the connection with the game station.
I think in the Advanced graphic card settings you should be able to find the right options.
Play a little bit with this settings.

System Monitoring using NetFlow.

Similar Messages

Maybe you are looking for