SYSTEM_NO_TASK_STORAGE dump
hi
am new in basis. am facing one problem production server .pls help me
my server is
sap 4.7ee
database 9i
os is windows 2003.
RAM is 4gb
swap is 12 max but is using 9.3 gb
swap record
Mon Jun 11 11:21:41 2007 interval 10 sec.
Com charg Com charge Act. size
limit [kb free [Kb] swap [Kb]
12852756 6645,616 9340,928
when the abapers writing the queries that time and some end user using some t codes that server given the error like SYSTEM_NO_TASK_STORAGE
Unable to fulfil request for 1559240 bytes of storage space.
in st22 t code error massage is Unable to fulfil request for 1559240 bytes of storage space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
Error analysis
A new storage area of 1559240 bytes was requested
(storage calss TASK).
All the available space has been used up.
Possible reason: Either the volume of data to be processed is too large
or the available swap space is too small.
How to correct the error
Restrict volume of data or increase swap space.
Decide by analysis whether this request is reasonable or whether there
is a program error. Pay particular attention to the internal table
entries listed below.
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 8112
Extended memory (EM)........... 14634144
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 1409024
Maximum address space.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
pls give me a solution it is urgent
Hi,
This error occurs due to the excess resources accessed by the particular report ran by the Abaper.
I think the problem is that the report access more memory and it takes the swap memory as per the dump error.
Pls find from the the abaper what is the option he is selecting to run the report...ie whether he selects a huge range of data...if not tell him to tune the report where it occupies the memory...
Hope this helps u..
Bye
Maheswaran J
Similar Messages
-
SYSTEM_NO_TASK_STORAGE
Hello all!
I hope you can help me with this problem.
I'm getting a SYSTEM_NO_TASK_STORAGE dump during a client export.
Is a SAP ECC 6 running in Windows 2003 Std Server. I have 4gb of RAM and 20gb of Page file.
My current isntance profiles is the following:
enque/table_size 8192
rdisp/max_wprun_time 1000
rsdb/cua/buffersize 4000
rdisp/PG_SHM 10000
rdisp/PG_MAXFS 80000
rdisp/ROLL_SHM 20000
rdisp/ROLL_MAXFS 20000
abap/heap_area_nondia 2000000000
abap/buffersize 600000
login/system_client 600
zcsa/system_language S
zcsa/installed_languages DES
login/no_automatic_user_sapstar 0
SAPSYSTEMNAME SMP
SAPGLOBALHOST PRODSERVER
SAPSYSTEM 00
INSTANCE_NAME DVEBMGS00
DIR_CT_RUN $(DIR_EXE_ROOT\$(OS_UNICODE\NTI386
DIR_EXECUTABLE $(DIR_INSTANCE\exe
PHYS_MEMSIZE 4090
rdisp/wp_no_dia 10
rdisp/wp_no_btc 5
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
rdisp/wp_no_enq 1
abap/heap_area_dia 2000000000
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 1
rdisp/wp_no_spo 1
Which values do I have to change?
Thanks!
Wadih SaadHI,
problem with memory management on SAP
check following notes
Note 88416 - Zero administration memory management as of 4.0A/ Windows
Note 546361 - FAQ: Storage problems on NT/Windows 2000
Note 103747 - Performance: Parameter recommendations as of Release 4.0
regards,
kaushal -
SYSTEM_NO_TASK_STORAGE during client export
Hello all!
I hope you can help me with this problem.
I'm getting a SYSTEM_NO_TASK_STORAGE dump during a client export.
My system is on Windows 2003 Std Server. I have 4gb of RAM and 20gb of Page file.
My current isntance profiles is the following:
enque/table_size 8192
rdisp/max_wprun_time 1000
rsdb/cua/buffersize 4000
rdisp/PG_SHM 10000
rdisp/PG_MAXFS 80000
rdisp/ROLL_SHM 20000
rdisp/ROLL_MAXFS 20000
abap/heap_area_nondia 2000000000
abap/buffersize 600000
login/system_client 600
zcsa/system_language S
zcsa/installed_languages DES
login/no_automatic_user_sapstar 0
SAPSYSTEMNAME SMP
SAPGLOBALHOST PRODSERVER
SAPSYSTEM 00
INSTANCE_NAME DVEBMGS00
DIR_CT_RUN $(DIR_EXE_ROOT\$(OS_UNICODE\NTI386
DIR_EXECUTABLE $(DIR_INSTANCE\exe
PHYS_MEMSIZE 4090
rdisp/wp_no_dia 10
rdisp/wp_no_btc 5
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
rdisp/wp_no_enq 1
abap/heap_area_dia 2000000000
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 1
rdisp/wp_no_spo 1
Which values do I have to change?
Thanks!
Wadih SaadHi Wadih saad,
I think the memory is not suffcient to hold the load. Check your swap space and memory during the client export and also check whether there is sufficient space in the hard disk to hold the export files.
You must have calculated the client size by using the test run. This size must be available as free space in hard disk to do the export.
Make the available space and do the export it will work.
Regards,
Maheswaran J -
Error GRC Access Control 10.0
We have a problem when execute the next steps in GRC Access Control 10.0
SPRO-->Governance, Risk and Compliance>Access Control--> Access Risk Analysis--> Batch RisK Analysis
We applied the next note, but problem is the same.
1563583 - SYSTEM_NO_TASK_STORAGE dump on AIX
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_GRRM_DASHBOARD_MENU_AUTH===CP
Application Component GRC-RM
Date and Time
13.03.2013 11:50:04
|Short text
|
|
The ASSERT condition was violated.
|
|What happened?
|
|
In the running application program, the ASSERT statement recognized a
|
|
situation that should not have occurred.
|
|
The runtime error was triggered for one of these reasons:
|
|
- For the checkpoint group specified with the ASSERT statement, the
|
|
activation mode is set to "abort".
|
|
- Via a system variant, the activation mode is globally set to "abort"
|
|
for checkpoint groups in this system.
|
|
- The activation mode is set to "abort" on program level.
|
|
- The ASSERT statement is not assigned to any checkpoint group.
|
|What can you do?
|
|
Note down which actions and inputs caused the error.
|
|
|
|
|
|
To process the problem further, contact you SAP system
|
|
administrator.
|
|
|
|
Using Transaction ST22 for ABAP Dump Analysis, you can look
|
|
at and manage termination messages, and you can also
|
|
keep them for a long time.
|
|Error analysis
|
|
The following checkpoint group was used: "No checkpoint group specified"
|
|
|
|
If in the ASSERT statement the addition FIELDS was used, you can find
|
|
the content of the first 8 specified fields in the following overview:
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|How to correct the error
|
|
Probably the only way to eliminate the error is to correct the program.
|
|
|
|
|
|
If the error occures in a non-modified SAP program, you may be able to
|
|
find an interim solution in an SAP Note.
|
|
If you have access to SAP Notes, carry out a search with the following
|
|
keywords:
|
|
|
|
"ASSERTION_FAILED" " "
|
|
"CL_GRRM_DASHBOARD_MENU_AUTH===CP" or "CL_GRRM_DASHBOARD_MENU_AUTH===CM001"
|
|
"IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED"
|
|
|
|
If you cannot solve the problem yourself and want to send an error
|
|
notification to SAP, include the following information:
|
|
|
|
1. The description of the current problem (short dump)
|
|
|
|
To save the description, choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
2. Corresponding system log
|
|
|
|
Display the system log by calling transaction SM21.
|
|
Restrict the time interval to 10 minutes before and five minutes
|
|
after the short dump. Then choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
3. If the problem occurs in a problem of your own or a modified SAP
|
|
program: The source code of the program
|
|
In the editor, choose "Utilities->More
|
|
Utilities->Upload/Download->Download".
|
|
|
|
4. Details about the conditions under which the error occurred or which
|
|
actions and input led to the error.
|
|
|
|
|
|System environment
|
|
SAP Release..... 702
|
|
SAP Basis Level. 0012
|
|
|
|
Application server... "KIO13701"
|
|
Network address...... "172.20.1.137"
|
|
Operating system..... "AIX"
|
|
Release.............. "7.1"
|
|
Hardware type........ "00F6C78E4C00"
|
|
Character length.... 16 Bits
|
|
Pointer length....... 64 Bits
|
|
Work process number.. 10
|
|
Shortdump setting.... "full"
|
|
|
|
Database server... "KIO13701"
|
|
Database type..... "DB6"
|
|
Database name..... "DGR"
|
|
Database user ID.. "SAPDGR"
|
|
|
|
Terminal.......... "192.168.0.5"
|
|
|
|
Char.set.... "C"
|
|
|
|
SAP kernel....... 720
|
|
created (date)... "Jul 8 2012 19:43:01"
|
|
create on........ "AIX 2 5 00092901D600"
|
|
Database version. "DB6_81 "
|
|
|
|
Patch level. 300
|
|
Patch text.. " "
|
|
|
|
Database............. "DB6 08.02.*, DB6 09.*, DB6 10.*"
|
|
SAP database version. 720
|
|
Operating system..... "AIX 2 5, AIX 3 5, AIX 1 6, AIX 1 7"
|
|
|
|
Memory consumption
|
|
Roll.... 0
|
|
EM...... 8379584
|
|
Heap.... 0
|
|
Page.... 16384
|
|
MM Used. 6205712
|
|
MM Free. 2170976
|
|User and Transaction
|
|
Client.............. 100
|
|
User................ "LVELASCO"
|
|
Language key........ "E"
|
|
Transaction......... " "
|
|
Transaction ID...... "51400164B1F00C40E1008000AC140189"
|
|
|
|
EPP Whole Context ID.... "5140015EB1F00C40E1008000AC140189"
|
|
EPP Connection ID....... "5140F9B0B19C1150E1008000AC140189"
|
|
EPP Caller Counter...... 1
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
Debugger Active..... "none"
|
|Server-Side Connection Information
|
|
Information on Caller of "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource ID. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
|
|
Information on Caller ofr "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource Id. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|Information on where terminated
|
|
Termination occurred in the ABAP program "CL_GRRM_DASHBOARD_MENU_AUTH===CP" -
|
|
in "IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED".
|
|
The main program was "SAPMHTTP ".
|
|
|
|
In the source code you have the termination point in line 59
|
|
of the (Include) program "CL_GRRM_DASHBOARD_MENU_AUTH===CM001".
|
|Source Code Extract (Source code has changed)
|
|Line |SourceCde
|
| 29|
lv_dashboard = lv_value.
|
| 30|
|
| 31|
TRANSLATE lv_dashboard TO UPPER CASE.
|
| 32|
|
| 33|
CASE lv_dashboard.
|
| 34|
WHEN 'HEATMAP'.
|
| 35|
lv_report = 'GRRM_HEATMAP'.
|
| 36|
|
| 37|
WHEN 'LOSS_OVERVIEW' OR 'LOSS_STRUCTURE' OR 'OB_LOSS_OVERVIEW' OR 'OB_LOSS_STRUCTU|
| 38|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 39|
|
| 40|
WHEN 'OVERVIEW'.
|
| 41|
lv_report = 'GRRM_OVERVIEW'.
|
| 42|
|
| 43|
WHEN OTHERS.
|
| 44|
ASSERT 1 = 2.
|
| 45|
|
| 46|
ENDCASE.
|
| 47|
|
| 48|
EXIT.
|
| 49|
|
| 50|
ENDLOOP.
|
| 51|
|
| 52|
WHEN 'GRRM_LOSS_MATRIX' OR 'GRRM_LOSS_MATRIX_NEW'.
|
| 53|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 54|
|
| 55|
WHEN 'GRRM_HEATMAP_REPORT'.
|
| 56|
lv_report = 'GRRM_HEATMAP'.
|
| 57|
|
| 58|
WHEN OTHERS.
|
|>>>>>|
ASSERT 1 = 2.
|
| 60|
|
| 61| ENDCASE.
|
| 62|
|
| 63| TRY.
|
| 64|
lv_regulation_id = cl_grfn_api_regulation=>if_grfn_api_regulation~get_regulation_id( i|
| 65|
|
| 66|
ev_authorized = cl_grfn_util_rep_auth=>has_rep_auth(
|
| 67|
io_session
= io_session
|
| 68|
iv_regulation_id = lv_regulation_id
|
| 69|
iv_report
= lv_report
|
| 70|
iv_activity
= grfn0_c_activity-print
|
| 71|
|
| 72|
|
| 73|
CATCH cx_grfn_exception.
|
| 74|
ev_authorized = abap_false.
|
| 75|
|
| 76| ENDTRY.
|
| 77|
|
| 78|ENDMETHOD.
|
|Contents of system fields
|
|Name
|Val.
|
|SY-SUBRC|4
|
|SY-INDEX|2
|
|SY-TABIX|1
|
|SY-DBCNT|1
|
|SY-FDPOS|0
|
|SY-LSIND|0
|
|SY-PAGNO|0
|
|SY-LINNO|1
|
|SY-COLNO|1
|
|SY-PFKEY|
|
|SY-UCOMM|
|
|SY-TITLE|HTTP Control
|
|SY-MSGTY|
|
|SY-MSGID|
|
|SY-MSGNO|000
|
|SY-MSGV1|
|
|SY-MSGV2|
|
|SY-MSGV3|
|
|SY-MSGV4|
|
|SY-MODNO|0
|
|SY-DATUM|20130313
|
|SY-UZEIT|115004
|
|SY-XPROG|SAPCNVE
|
|SY-XFORM|CONVERSION_EXIT
|
|Active Calls/Events
|
|No. Ty.
Program
Include
Line |
|
Name
|
| 34 METHOD
CL_GRRM_DASHBOARD_MENU_AUTH===CP
CL_GRRM_DASHBOARD_MENU_AUTH===CM001
59 |
|
CL_GRRM_DASHBOARD_MENU_AUTH=>IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED
|
| 33 METHOD
CL_GRFN_API_MENU_ITEM_ELA=====CP
CL_GRFN_API_MENU_ITEM_ELA=====CM001 126 |
|
CL_GRFN_API_MENU_ITEM_ELA=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 32 METHOD
CL_GRFN_API_MENU==============CP
CL_GRFN_API_MENU==============CM003
34 |
|
CL_GRFN_API_MENU=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 31 METHOD
CL_GRFN_LAUNCHPAD_UIBB========CP
CL_GRFN_LAUNCHPAD_UIBB========CM006
60 |
|
CL_GRFN_LAUNCHPAD_UIBB=>IF_FPM_GUIBB_LAUNCHPAD~MODIFY
|
| 30 METHOD
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CP
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CM001
76 |
|
CL_FPM_LAUNCHPAD_UIBB_ASSIST=>INIT_FEEDER
|
| 29 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
410 |
|
CL_COMPONENTCONTROLLER_CTR=>WDDOINIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 28 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
181 |
|
CLF_COMPONENTCONTROLLER_CTR=>IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 27 METHOD
CL_WDR_DELEGATING_COMPONENT===CP
CL_WDR_DELEGATING_COMPONENT===CM004
9 |
|
CL_WDR_DELEGATING_COMPONENT=>DO_INIT
|
| 26 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM00V
3 |
|
CL_WDR_CONTROLLER=>INIT_CONTROLLER
|
| 25 METHOD
CL_WDR_COMPONENT==============CP
CL_WDR_COMPONENT==============CM019
24 |
|
CL_WDR_COMPONENT=>INIT_CONTROLLER
|
| 24 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM002
7 |
|
CL_WDR_CONTROLLER=>INIT
|
| 23 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00E
24 |
|
CL_WDR_CLIENT_COMPONENT=>INIT
|
| 22 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00A
42 |
|
CL_WDR_CLIENT_COMPONENT=>IF_WDR_COMPONENT_FACTORY~CREATE_COMPONENT
|
| 21 METHOD
CL_WDR_COMPONENT_USAGE========CP
CL_WDR_COMPONENT_USAGE========CM009
67 |
|
CL_WDR_COMPONENT_USAGE=>IF_WD_COMPONENT_USAGE~CREATE_COMPONENT
|
| 20 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM003
81 |
|
CL_FPM_COMPONENT_MANAGER=>ADD_COMPONENT
|
| 19 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM004
19 |
|
CL_FPM_COMPONENT_MANAGER=>ATTACH_COMPONENT_TO_USAGE
|
| 18 METHOD
CL_FPM========================CP
CL_FPM========================CM005
89 |
|
CL_FPM=>PROCESS_EVENT
|
| 17 METHOD
CL_FPM========================CP
CL_FPM========================CM00C
34 |
|
CL_FPM=>RUN_EVENT_LOOP
|
| 16 METHOD
CL_FPM========================CP
CL_FPM========================CM002
5 |
|
CL_FPM=>IF_FPM~RAISE_EVENT
|
| 15 METHOD
CL_FPM========================CP
CL_FPM========================CM003
11 |
|Hi Alberto,
The below Notes should resolve!
1428775
1744179
Hope this helps,
Luciana -
SYSTEM_NO_TASK_STORAGE error
hi
am new in basis. am facing one problem production server .pls help me
my server is
sap 4.7ee
database 9i
os is windows 2003.
RAM is 4gb
swap is 12 max but is using 9.3 gb
swap record
Mon Jun 11 11:21:41 2007 interval 10 sec.
Com charg Com charge Act. size
limit [kb free [Kb] swap [Kb]
12852756 6645,616 9340,928
when the abapers writing the queries that time and some end user using some t codes that server given the error like <b>SYSTEM_NO_TASK_STORAGE</b>
<b>Unable to fulfil request for 1559240 bytes of storage space.</b>
in st22 t code error massage is Unable to fulfil request for 1559240 bytes of storage space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
Error analysis
A new storage area of 1559240 bytes was requested
(storage calss TASK).
All the available space has been used up.
Possible reason: Either the volume of data to be processed is too large
or the available swap space is too small.
How to correct the error
Restrict volume of data or increase swap space.
Decide by analysis whether this request is reasonable or whether there
is a program error. Pay particular attention to the internal table
entries listed below.
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 8112
Extended memory (EM)........... 14634144
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 1409024
Maximum address space.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
pls give me a solution it is urgent
Message was edited by:
kiran kumarHello Kiran,
First question:
1 Is the dump coming for standard SAP transactions or for custom transactions developed by your ABAPers?
If it is for standard SAP transaction then please review the values of profile parameters mentioned in the dump.
If it is for non standard then there are performance issues arising out of the code written by your developers. Please get it reviewed.
Regards.
Ruchit. -
SYSTEM_NO_TASK_STORAGE during the SPAM (RC=12)
Hello!:
Appyling some patches in the SPAM i've this problem:
The import was stopped, since an error occurred during the phase DDIC_ACTIVATION, which the Support Package Manager is unable to resolvewithout your input.
After you have corrected the cause of the error, continue with the import by choosing Support Package -> Import queue from the initial screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Retur code: 0012
- Error message: OCS Package SAPKA70009, tp step A, return code
0012
And generate this DUMP:
Runtime Errors SYSTEM_NO_TASK_STORAGE
Date and Time 13.06.2008 11:49:48
Short text
Unable to fulfil request for 5607360 bytes of storage space.
I've the next parameters:
rdisp/ROLL_SHM 16384
rdisp/ROLL_MAXFS 32768
rdisp/PG_SHM 8192
rdisp/PG_MAXFS 32768
abap/heaplimit 40894464
abap/swap_reserve 20971520
em/blocksize_KB 4096
em/stat_log_size_MB 20
em/stat_log_timeout 0
ztta/roll_area 15000576
zcsa/table_buffer_area 30000128
rtbb/buffer_length 10000
rsdb/cua/buffersize 3000
zcsa/presentation_buffer_area 4400128
rdisp/appc_ca_blk_no 100
rdisp/wp_ca_blk_no 300
rsdb/ntab/entrycount 19990
rsdb/ntab/ftabsize 30002
rsdb/ntab/irbdsize 6000
rsdb/ntab/sntabsize 3000
abap/buffersize 75000
em/initial_size_MB 1200
abap/heap_area_nondia 1000341504
abap/heap_area_dia 1000341504
SAPSYSTEMNAME SOL
ztta/roll_extension 1000341504
SAPSYSTEM 01
abap/heap_area_total 1500512256
I've change in AIX the Limits in AIX, an all is unlimited.
Thanks and regards,
Alfredo.Hello,
I have the same problem as alfredo's ones. I followed the instructions of this thread but no success.
I am performing the trx SPAM against the Support Package SAP_BASIS : SAPKB7012. It failed during the phase of DDIC_ACTIVATION with the reason of error : TP_STEP_FAILURE and its RC is 12.
I checked the JOB which failed it is RDDMASGL with the ABAP/4 processor dump: SYSTEM_NO_TASK_STORAGE.
According to the trx ST22 on that program:
"Unable to fulfill request for 247040 bytes of storage space at the sentence: sort tabltab by name (table dd03l)"
Information on where terminated
Termination occurred in the ABAP program "RADMASDSC" - in
"MA_DTEL_TABL_MCID_SEL".
The main program was "RADMASG0_C3 ".
In the source code you have the termination point in line 262
of the (Include) program "RADMASDSC".
The program "RADMASDSC" was started as a background job.
Job Name....... "RDDMASGL"
Job Initiator.. "DDIC"
Job Number..... 15453500
The computer has 8GB and the SAP parameters are:
ztta/roll_extensionl = 4GB
abap/heap_area_total = 4GB
abap/heap_area_nondia = 4GB
abap/heap_area_dia = 4GB
ztta/roll_area = 3MB
The computer was already refreshed and taken the above values.
The use of swap: swap -s
root@yanbalRD1:/ # swap -s
allocated = 5177344 blocks used = 4813 blocks free = 5172531
blocks
No problem with swap...
The SAP is SCM 5.0 with the kernel NetWeave 7.0 level 169 along with DB2 UDB v9.1.4
The SPAM/SAINT is of level 29
Let me know if you need for further clarification.
Regards,
Rodolfo Neuhaus
Edited by: Rodolfo Neuhaus on Aug 3, 2008 11:04 PM
Edited by: Rodolfo Neuhaus on Aug 3, 2008 11:07 PM -
SYSTEM_NO_TASK_STORAGE DDIC_ACTIVATION upgrade to EHP4 SPS5
Hello,
When want to upgrade our system from SAP ERP 6.0 EHP3 SPS5 ( Windows 32 Bit with RAM 3Gb ) to EHP4 SPS5 with SAINT we encountered the following Error in DDIC Activation phase :
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPK-60401INEAAPPL, tp step A, return
code 0012
In ST22 we have the following message :
Runtime Errors SYSTEM_NO_TASK_STORAGE
Date and Time 20.05.2011 19:51:09
Short text
Unable to fulfil request for 3897444 bytes of storage space.
We have adjut the following parameters but we still have the error :
tta/roll_extension = 2000000000
ztta/roll_area = 1000000
ztta/roll_first = 1
em/max_size_MB = 20000
em/initial_size_MB = 2048
abap/heap_area_dia = 2000000000
abap/heap_area_total = 5000000000
abap/heap_area_nondia = 2000000000
We have also applied /3GB in boot.ini for windows (recommendation Note 1275873 - Memory bottleneck during DDIC activation during EHP import ).
Thank you for you help.The short-dump issue you are experiencing is a well known problem which uses to occur on 32-bit architecture system platforms;
those short-dumps are a clear indication of a 'lack of memory (address space) issue'.
When a program (or a transaction or a job) is running, the work process
follows this memory allocation sequence (valid for Windows platforms):
a) Roll memory up to the quota "ztta/roll_first"
b) Extended memory up to the quota "em/address_space_MB"
c) Roll memory up to the quota "ztta/roll_area"
d) Heap memory up to the quota "abap/heap_area_dia"
Short dumps like these ones arise when additional memory
is required to extend the internal table, but none is available.
Check these points :
- make sure parameters values are set as indicated in Note 88416
read the document "Optimizing the Memory Settings for
SAP Systems on 32-Bit Windows" that you will find at:
http://service.sap.com/~sapidb/011000358700006425762006E
Also,
- Enable the Windows startup option /3GB, as per Note 110172
- Reduce the memory parameters rdisp/ROLL_SHM and rdisp/PG_SHM to
6000 and check that other memory buffers like abap/buffersize have
not been increased from default values.
Note 110172 : Windows: Transactions with large memory requirements
- Niraj -
ABAP/4 processor: SYSTEM_NO_TASK_STORAGE
Hi Experts,
I have tried to load one of the master datasource(ocrm_srv_ibase_attr) from crm(qa system) to bw system. the job is getting cancelled in the source system with below error message.
ABAP/4 processor: SYSTEM_NO_TASK_STORAGE
Job cancelled
I have tried to extract data this datasource by using rsa3 tcode and its going into short dump with time_out message.
Could any one faced this type of issue...Any clue...
Thanks in advance.
Regs,
Vachan
Points will be assigned.Hi,
Normally this error happens due to insufficient memory to process the requests.
Make more "memory" available for the program xecution. To do so you must iterativly adjust the parameter mentioned in the shortdump.
It might be necessary to put more RAM or increase swap if these parameter have to be increased significantly. See also note 20527.
You also need to
check parameter abap/heap_area_dia and abap/heap_area_nondia
I hope this helps you to overcome the problem.
Regards,
Venu -
Lock ups and dumping psyical memory!!!
Hi i have just installed a new pc most of the stuff im useing is from my old computer so i know they work fine im running a:
P4 3GHZ Prescot 800MHz, HT-Enabled
865PE Neo2-P
512 DDR-400 Twin moss
ATI Radeon 9000 pro
PSU-400
XP Pro
My computer locks up alot when running intense games (games have worked before no problem) i also get a error saying dumping pysical memory, i have looked about and tried to solve this myself, i found that someone was haveing the exact same problem as me and he fixed it by turning the FSB down as his memory wasnt compatable with his motherboard if doing that works how do i do it ?
Many thanks JonathanFlappa, Your memory " clock" is fine and there is no need to "underclock it" as long as you did not mess with the Bios.
I had the same problems. I could not even get thru a Clean install of windows as it would Blue Screen
1- are you running in " Dual Channel Mode"?
2- If so is your memory a " match Set"?
some times memory even thought it has the same markings is not matched . Dual channel sets are matched and made to run together in "Dual Channel Mode"{
( Even though I had the same manufacturer memory my set would not run in Dual Channel without " Blue Screening" I bought a Matched Set of Kingston Valueram and have not had a problem since
3- If it is not a matched set, pull one stick out and run it for a while , if it still bluescreens try the other stick
4- raise your memory voltage to 2.7 or 2.8 ( which ever is the lowest that it runs stable)
5- If all this does not work , run MEMTEST to see if there is a problem with both sticks
6- you are running a Bios Version that supports the " Prescott Microcode" right?
Let us know what your findings are
Good Luck
Dave -
Report J_1IEWT_CERT getting cancelled, generating ABAP dump!
A long running report J_1IEWT_CERT in background mode is getting cancelled after running for a while and generating the following dump :
Error analysis
When changing or deleting one or more lines of the internal table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]" or when inserting in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
At the time of the termination, the table contained 17008 lines.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TABLE_INVALID_INDEX" " "
"J_1IEWT_CERT" or "J_1IEWT_CERT_F01"
"FILTER_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Tried searching for some SAP Notes to fix the issue, no success as of now, Please help me out...Have you checked these notes ?
363107 Short dump occurs during TDS certificate printing.
803806 Error while genrating TDS certificate 03.01.2005
1066049 J1INCERT - Error while generating TDS certificate
Regards,
Subhash -
Short dump 'Table does not exist in database'
Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num = :p_matnr and
model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
Table does not exist in database.
What happened?
The table or view name used does not
exist in the database.
The error occurred in the current database connection "DEFAULT".
What can you do?
Check the spelling of the table names in your report.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
caught in
procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions. -
Short Dump while scrolling in a maintenance view
A maintenance view has one field, defined as "Radiobutton".
1) Select the radiobutton for one entry.
2) Scroll down so that in the new page (i.e. the entries displayed in the new page) the entry selected in the first step is not visible.
3) Select any radiobutton again corresponding to any of the entries displayed in the new page.
4) On scrolling up again the short dump occurs.
The short dump text says "More than one radio button is active".
Any inputs in this regards are appreciated.
Thanks.
Gajendra.Hi,
that means you are trying to make two radio buttons active.
parameters: ra radiobutton group g1 default = 'X',
rb radiobutton group g1.
ra = 'X'.
and rb = 'X'.
in your case so obviously it will dump.
check your coding..
and show your code...
Regards
vijay -
Is it possible to create manually a dump?
Dear all,
I have a question about Dumps created in SAP while programs run with unpredicted errors.
I have a specific table defined in the dictionary which has two coloumns progId and path.
The first one is a unique identifier given to a program and the second column is an absolute path on the
unix server where SAP is installed.
For example
MyProg | /usr/tmpbatch/data/E200
Means that the ABAP program named 'MyProg' will run and its output file (the output of the program) and the
log file are created in /usr/tmpbatch/data/E200.
In each of my programs, first of all I check the content of this table in order to ensure that the path is defined for the
given program (and therefore I may be able to create avec success both output and log files). If there is no entry
in the table for the given program, I leave the program by calling the STOP instruction.
My programs run at night, so the next day the corresponding users read the content of the generated output/log files.
As a result, if the path is not defined properly for a given program in the table, the program is not run and therefore
there will be no output/logfile the next day.
My question is How can I inform the user who arrives the next day observing that one program has not been run? How
can I tell him by some kind of system message that the program exited because the path for the files had not been defined in
my table?
Each morning, we can analyse the dumps which were produced during the precedent day. So that we may know
(approximately) what went wrong. But as far as I know, dumps are generated automatically by the system. Is it possible
to generate a dump (by calling some fucntion) with an appropriate error message for my problem?
Thanks in advance,
DariyooshHello again,
First of all I would like to thank everybody for their attention to my problem and
for spending time for answering my question. Thank you all very much.
Currently, Thomas' solution about MESSAGE_TYPE_X seems to work pretty well
for my problem. As all of you mentioned that, there should be softer methods to inform
users. One main problem is that the program which lanuches my programs during night
is not a sap user, it is a Unix scheduler (please forgive me I don't know these administration
details and how they work) so according to what the administrator told me it is not possible
to send email. As a result, I think I may go with MESSAGE_TYPE_X until I found another proper way.
Once again, thank you all for your help.
Kind Regards,
Dariyoosh -
Error while importing a dump file in Oracle 10g R1
Hi all,
While trying to import a schema using Data Dump, I am facing the following issue -
UDI-00018 - Import utility version can not be more recent than the Data Dump server.
Following is the version information of the source and target DB and the utilities :
Source DB server : 10.1.0.2.0
Export utility : 10.1.0.2.0
Import utility : 10.1.0.2.0
Target DB server : 10.1.0.2.0
Export utility : 10.2.0.1.0
Import utility : 10.2.0.1.0
I can figure out the cause for the problem, but don't know how to resolve it.
Any help will be appreciated.
Thanks in advance.
Gitika KhuranaHow did you get thre DMP file created and how are you trying to import the dump file? Could you post the commands you're using, please?
-
Error_Exception dump while opening the report in RRMX
Hi All,
When User trying to open the report Error_Exception dump is coming for few Info Providers. Please find attached dump for your reference.Issue is res loved, We have analyze the short dump ,when loads were running and at that if time user executed the queries then that dump was occuring.
Maybe you are looking for
-
How to make a billing forms in oracle forms 6.0?
hi,i want to make a sample billing form in oracle forms.my fields details itemcode varchar2(6); itemname varchar2(25); quantity number(5); prompt quantity in kg selling_price number(5); subtotal number(5); total number(6); i have no idea about billin
-
Cannot delete file after calling JAI.create() method
hi all this is the first time i write to this list today i began to use the JAI api on a project it works fine but i am not able to delete a file after using it my code: for(int i=2; i<2+filenames.size(); i++) try
-
My ipad has a black screen and the power button is not working. Help!
This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from
-
Using a *.wmv file to make a home video playable in DVD players?
Hello all, I have a project where I need to take a slide show made in Windows Movie Maker (.wmv file extension), burn it to a CD and make it play in a DVD Player. I attempted just making a VCD on a Windows XP laptop, but it wouldn't play in the DVD P
-
hiya, does anyone know a way to get both gps and wi-fi in a pearl? gps or wifi addon/card to supplement the missing feature in one of the current pearls? just wait and see if they ever do it? thanx, bradt