System not abel to find storage bin .

hI All ,
I am trying to do goods reciept in storage locatrion which is warehouse managed.
required storage type indicator is assigned to material master .
Storage type config is :
Putaway strategy : I (addition to existing stock)
Mixed storage:X (Mixed storage without limitations)
Addn to stock:X (Addition to existing stock permitted.)
ENough storage bins are created in system.
When i am tryng to do GR , system not abel to find the storage bin .
note: Each bin is having some stock of some other material. But we have "Mixed storage" indicator on. so it should not have given error.
Also if i create a new empty bin , then system pulls that bin in storage bin search to put the stock there.
Please guide why system is not abel to find correct storage bin. Is there any OSS note to be applied here .
Regards
Rohit Chavan

With addition to stock strategy, SAP is looking for a bin having stock of the same material. If that is not the case then it switches to strategy "next empty bin".
Mixed storage is not allowed in this strategy.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm

Similar Messages

Not Printing the source storage bin in the layout

Hi Gurus
As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
Please help me,
Thanks in advance,

sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working

Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001 904 1110500002 does not exist (Check your entry)"
This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
Please advise on how this process should happen.
Regards.

Hi TQ,
Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
Can you elaborate more in detail how you solved your error few months ago?
Thanks and regards

Not abel to find generate code option for android

Hi All,
we have SUP 2.1 ESD #1 implemented in our environment and trying to generate the code for android platform for whihc we are not to find in the option in SDK. when we try yo generate the code in SDk we are abel to find it for IOS, BB platfoms and not for android. after applying EBF 19762 restarted the server and still we are not able to see it.
we wanted to know how to generate the code for android mobilre?
please do the needful.
thanks
SK

You're right.
SK, please take a look here:
[http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01726.0211/doc/html/apr1323303877111.html]

System Not coming in Find Data

Hi,
I added a new JDBC system in portal in Visual Composer folder, created alias, done usermapping and my connection tests are successful.
But when i tried to access it from VC, its not coming up in Find data tab.
I am getting the following message in status area
<b>0001> Welcome to Visual Composer
0002> com/sap/portal/connectivity/destinations/IPortalSystemLandscapeRetriever</b>
Any ideas?
Regards,
Sooraj

Hi,
There is a message box saying no BI systems are configured with the portal when i try BI integration wizard.
Regards,
Sooraj

Itunes not abel to find compilations

Hi,
I was cleaning my iTunes library and all the songs got deleted, I was able to get most oof the songs back to my library but some cd's that i've add it to my librarry (compilations) are missing, I've been trying to find a copy of this cd's and put them back into my library but I haven't been able to locate them. Is there a way to find this songs in my computer again?

vonrosen wrote:
I was cleaning my iTunes library and all the songs got deleted,
OK, how pray tell, did you manage that?
I was able to get most oof the songs back to my library but some cd's that i've add it to my librarry (compilations) are missing, I've been trying to find a copy of this cd's and put them back into my library but I haven't been able to locate them.
Typically compilations, if they were tagged as such in iTunes, will be stored in the Compilations folder in the iTunes Music Folder. In other words, in the main iTunes Music folder you have a bunch of artist folders. One of those "artists" is "Compilation". Did you look there yet?
If you didn't tag them as compilations in iTunes, then all the songs are stored under each artist folder. So if the compilation had ten different artists, then the album is spread over ten different artist folders.
Patrick

Storage bin not found (enter storage type) L3398

Hi,
We have an very critical issue. We have gone live on 14th , only one day before. Now our system is showing the message
"Storage bin not found (enter storage type) L3398.""
We have defined Open storage type in our system where , mix storage is allowed. There are 10 bins in this storage type. There is not capacity check for these bins. Now system is not searching bin from Open storage and we have stucked with TO creation. System is not allowing us to created any TO.
KIndly do the help
I will be very thankful if reply fast.
Regards,
Manish I

Hi MANISH,
Though there exists many storage bins , the system is not able to find these bins because proper storage unit type is not defined.
System identifies the destination based on the following criteria :
Activate Storage Type Search
Activate Storage Section Search
Activate Storage Bin Type Search
Go through the below customising for better understanding :
SPROLogistics ExecutionWarehouse Management--Strategies
Maintain the Warehouse Management 2 view of Material master with Palletization data .
Thanks,
Swamy H P

Storage bin are not found

Hi Gurus,
Could you please help me for my query. We are doing Outbound deliveries for Stock transport orders and we TOs are creating
through VL06O. and some time we are using LT01 to move the material form bin to bin and while confirming the TO system is
giving the error, storage bins are not found but bins are there.and what is the reason for this and how to resolve this.
2. One more Query:
What is the use of LT10 (As i know it is for the bin to bin transfer).
but we have LT01, here also we can transfer bin to bin. what is the main difference. Plz explain
I will appriciate your help.
thnx
raghu

Hi
Find below the answer of your Q
1) Check the storage type defined into the WM1 view for the same material. Check the availability of bins in the same storage type
if both are matching then check the weight parameter of the storage bin and the pallet which you are planning to move into the
Bins
2) LT01 is for single line item whereas LT10 is for collective processing
Regards
Manish

Not all storage bins in LX16 transaction Carry Out continous inventory

Hello,
I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
Can somebody help us??
Thanks in advance

hi
LX16 transaction is only for " Continious Physical inventory Counting Only"
LX03 is for bin status Report
Take Continuous Inventory
Purpose
With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
Prerequisites
Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
Process Flow
To run a continuous inventory, you need to complete the following steps in the order displayed:
Plan the inventory by selecting storage bins, for which you want to take inventory.
Create the system inventory record
Activate the system inventory record
Print the warehouse inventory list.
Take physical inventory in the warehouse.
Enter the inventory results
Close the inventory
Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
hope this helps to solve your issue
regards
KKY

Storage Bin

Hi Guru's
Can we find storage bin while doing delivery, If we have Warehouse Configured in our system
Thanks and Regards
Srinivas Kapuganti

Hi there,
Yes you can see the storage bin. But make sure that you have done the picking with Transfer Order. Unless the Transfer order is confirmed, items are not picked. Only then stirage bin will appear in the delivery.
You can find that in Item Picking.
Regards,
Sivanand

Problem with storage Bin

Dear All,
My request is like
in material master i have assigned Storage bin ( WH2 view ) but at the time of creating Transfer Order if user put different storage bin then system accept that at post the material to other storage bin .... ( not puting material in storage bin mentioned in material master)
i want to block the TO if user mention any different storage bin at the time of creating TO
PL. HELP
With best regards
Suman

Hi
Thanks for your reply
I mention X to Addn to stock but system give same error message
If you have st.pl.str. "Fixed bin", add.to ex.st. must be allowed
MY STORAGE TYPE SETTING ARE AS FOLLOWS
1. OUTAWAY STRATEGY: F
2. STOCK REMOVAL STRATEGY : F
3. TICK ON STOCK REMOVAL REQD CONFIR
4.TICK ON FULL STK RMVL REQD. ACT
5.TICK ON RETURM MATL TO SAME STORAGE BIN
6. TICK ON SUT CHECK ACTIVE
7. TICK ON STORG.SEC.CHECK ACTIVE
please give your valuable suggestion
wuth best regards
Suman

Blocking Storage Bin

Hi experts,
I have question about following situation.
I storage goods in more than one storage bin. My storage strategy find storage bin automaticly. If the first storage bin full, strategy find second storage bin. I want that, system block the first storage bin automaticly till the first storage bin will be empty. System doesnt allow add new goods that quant.
how can i do that?
Thank your support.

Hi Manish,
I explain what i need with example;
I have 2 storage bin for my material. All this bin's capacity is 5 pcs. Now first good issue with PO about 5 pcs. this material putaway first bin. then other good issue 3 pcs. This material putaway 2nd bin. Then i remove material 3 pcs in 1st bin. As a result, i have 2 pcs material 1st bin and 3 pcs material seceond bin. My capacity is 3 pcs 1st bin and 2pcs 2nd bin.
Now, if there is good issue same material, system doesn't allow putaway this materials to 1st bin. System block this 1st bin automaticlly. This block is automatically deleted after the last storage unit has been removed from stock (picked from the row).
By the way, am i need batch management to implement this strategy for this material?
Thanks for advice..

Copy of Storage bin while creating Material master

Hi,
When I am creating a material master by coping a existing Material Master (which has WM view and Storage bin maintained), system does not copy the same Storage bin to the material which is getting created
All the informations are copied except the Storage bin,
We need this for some business reason
Is this possible

Hi,
We are creating the Material master copying exisiting material for Plant --> Warehouse --> Storage type

Picking from another storage bin

During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

Hi,
With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
Thanks
Vinod.

WM how to determine storage bins manually for a multi row transfer order?

Hi to everyone. in our WM configuration, SAP system is posting transfer requirements automatically according to goods receipt. After that, we want to post transfer orders with reference to recently created transfer requirement.
We prefer to use Logistics> Logistics Execution> Internal Whse Processes> Transfer Requirement> Display> LB12 - For Material Document
Then choose the transfer requirement we want and press "TO in foregr." button. For single material documents, there is not a problem, we can easily determine the storage bin(s) we want to transfer materials. But in multi material transfer orders there is not an option to choose storage bins in "Create TO from TR: Overview of Transfer Requirement" screen. it is expected from us to "generate TO item" and "save" without entering any storage bin addresses. after that, system automatically send materials to storage bins according to customizations and the material master data.
I want to know, if there is a possibility for us to choose the storage bins we want in multi material transfer orders which are created from transfer requirements. Any help will be highly appreciated.
Thanks in advance.
Mehmet Akif EREK
İDO SAP MM Responsible.

Standard program: RLVSDR40
Standard report: LVSLESCHEIN
The path for configure the documents that we want to print when we create transfer orders is: SPRO --> SAP REFERENCE IMG button --> Logistics Execution --> Warehouse Management --> Storage Units --> Activities --> Define print control.

System not abel to find storage bin .

Similar Messages

Maybe you are looking for