System not coming up for PSS in AC 10.0

I started configuring AC 10.0 and added connectors using SPRO but when i go to nwbc to reset my password it is not bringing up any systems list.
Should i be checking something to bring in the list of systems.
Thanks
Uday

Hi Uday & Jagat,
As lmassena correctly mentioned Go to:
SPRO -> Governance, Risk and Compliance -> Access Control -> Maintain Connector Settings
Then scroll right and you will see a check box with label "PSS"
For other configuration details Please check SAP Note 1617371 and 1578837 for the detail Configuring Password Self-Service in GRCAC10 and Password Self-Service Email.
Thanks,
Guru

Similar Messages

Business System Not coming up in configuration

Hi All,
I am new to SAP XI.
I was trying to create a scenario for transfering the data from IDOC on to an flat file.The business system which I created in SLD is not coming up while assigning the same in the configuration part.
I had the following doubts:
1.When the IDOC is send from the ECC system the business system needs to be configured to ECC,right?
2.If the above statement is true, can you please suggest the reason why it is not coming up in the configuration part?Is there any way to find what the reason would be?
Regards,
Rupesh.

Hi,
Business system needs to be created in XI SLD.
You have to done following configuration for Idoc scenario:
- Sender system:
SALE (define logical system, model configuration etc) /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
- XI system
SM59 RFC destination for sender system
IDX1/IDX2 port and metadata.
business system configuration on XI SLD
Regards,
Gourav
<i>Reward points if it helps you</i>

SAP JAVA system not coming up after restart

Hello SAP experts,
I have a following enviorment
SAP WAS JAVA only
OS:- solaris
DB;- 9207
Kernel:= 640
I had a daily schedule restart of the system.
But after shutting down the system is not coming up and also i chekeced the logs it was related to R3trans.
the R3trans -d log is as seen below:-
Line:-----
"trans.log" [Read only] 44 lines, 4056 characters
4 ETW000 R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 24.06.2009 - 13:04:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Wed Jun 24 13:04:46 2009                             733 0.000733
4 ETW000 [dev trc     ,00000] db_con_init called                                    66 0.000799
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                            316 0.001115
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/DC2/SYS/exe/run/dboraslib.so' ...
4 ETW000                                                                             206 0.001321
4 ETW000 [dev trc     ,00000] Wed Jun 24 13:04:47 2009                           92178 0.093499
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/DC2/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000                                                                             283 0.093782
4 ETW000 [dev trc     ,00000] Library '/usr/sap/DC2/SYS/exe/run/dboraslib.so' loaded
4 ETW000                                                                              88 0.093870
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000                                                                             110 0.093980
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/DC2/SYS/exe/run/dboraslib.so' is "640.00", patchlevel (0.55)
4 ETW000                                                                             520 0.094500
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000                                                                              94 0.094594
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000                                                                             266 0.094860
4 ETW000 [dev trc     ,00000] New connection 0 created                              98 0.094958
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                             112 0.095070
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                        147 0.095217
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              88 0.095305
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              92 0.095397
4 ETW000 [dev trc     ,00000] Got ORACLE_HOME=/oracle/DC2/920_64 from environment
4 ETW000                                                                            1837 0.097234
4 ETW000 [dev trc     ,00000] -->oci_init1                                         123 0.097357
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         73 0.097430
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
4 ETW000                                                                            9213 0.106643
4 ETW000 [dblink      ,00419] ***LOG BY2=>sql error -1     performing CON [dblink#2 @ 419]
:$
4 ETW000                                                                             266 0.094860
4 ETW000 [dev trc     ,00000] New connection 0 created                              98 0.094958
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                             112 0.095070
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                        147 0.095217
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              88 0.095305
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              92 0.095397
4 ETW000 [dev trc     ,00000] Got ORACLE_HOME=/oracle/DC2/920_64 from environment
4 ETW000                                                                            1837 0.097234
4 ETW000 [dev trc     ,00000] -->oci_init1                                         123 0.097357
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         73 0.097430
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
4 ETW000                                                                            9213 0.106643
4 ETW000 [dblink      ,00419] ***LOG BY2=>sql error -1     performing CON [dblink#2 @ 419]
4 ETW000                                                                             356 0.106999
4 ETW000 [dblink      ,00419] ***LOG BY0=>'OCI_ERROR' [dblink#2 @ 419]              61 0.107060
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'DC2'"
~
Line:-----
So i changed the NLS parameter from
Old value:-ORA_NLS33=/oracle/DC2/920_64/ocommon/nls/admin/data
New value:- ORA_NLS33/oracle/client/92x_64/ocommon/nls/admin/data
Now R3trans -x worked fine but R3trans -d is not working well its giving the following utput
6% R3trans -d
This is R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function:   db_ntab
2EETW000 fcode:      NT_RDTDESCR
2EETW000 tabname:    TADIR
2EETW000 len (char): 5
2EETW000 key:        TADIR
2EETW000 retcode:    2
R3trans finished (0012).
nus650pa:dc2adm 7% R3trans -x
This is R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
unicode enabled version
R3trans finished (0000).
So please help me out for the same.
Apreciating your valuable help.
Thanks and Regards,
Ramkrishna

Hello Markus and Mr. Joshi,
The problem has been solved now.
And the analysis of the logs was not much helpful as the dev_jcontrol, dev_dispatcher and other std_* logs were only saying about the shutdown operation.
so i was trying to solve the issue old ways so tried the R3trans as such the client has not upgraded the kernel for pretty long time , but after much research i found out that there was a oracle client updated on the same server.
so i changed the NLS33 parameter and also added the old client path in LD_LIBRARY_PATH.
It worked fine and the portal is up and running.
Thanks for the advice and help guys.
Regards,
Ramkrishna

Output message not coming automatically for PO

hi
i cerated new output message sending PO to vendor by e-mail. I maintained condition records in MN04. Condition table, access sequence all are maintained. I included new output type into the control data of the existing schema RMBEF1 and the schema is assigned to PO also. Also maintain entry in following string SPRO- Material Management-Purchasing-Messages-Output control-Message Types-Define Message type for PO---Fine-Tuned Control: Purchase Order
Still the output message is not coming automatically while creating PO every time i add output type namually. please guide
regards

Hope you have maintained condition for combination. preferrably -
1) Purch Doc type > PORG > Vendor
2) Please make sure that, you have maintained the fileds which are relavant for output.(if you are making any changes in existing PO and you need output)
Hope this will help you

System Not coming in Find Data

Hi,
I added a new JDBC system in portal in Visual Composer folder, created alias, done usermapping and my connection tests are successful.
But when i tried to access it from VC, its not coming up in Find data tab.
I am getting the following message in status area
<b>0001> Welcome to Visual Composer
0002> com/sap/portal/connectivity/destinations/IPortalSystemLandscapeRetriever</b>
Any ideas?
Regards,
Sooraj

Hi,
There is a message box saying no BI systems are configured with the portal when i try BI integration wizard.
Regards,
Sooraj

Solman system not coming up after Kerbel upgrade

Hi All,
We are not able to bring the system up after kernel upgrade on our Solution Manager Development system.We were trying to upgrade kernel from 32 to 94.
Solman is on Netweaver 7.0 EHP1
We are having our Opearting Sytem as AIX 5.3
Our database is DB2 version 9.1.5
DB2 is installed on Mainframe.
Please find logs of R3trans below
As per the error we found that SAPCL is not installed (Note 1236755), but further analysis we found that SAPCL & Kernel Upgrade are independent of each other.
Can Restarting the DB2 database help on this issue?
Regards
Shailesh
Error from R3 trans Log
=================================================================================================
4 ETW000 [dbdb2cli    ,00000] *** ERROR => DB2 Call 'CLI_EXECUTE' Error: sqlcode = -204 : [IBM][CLI Driver][DB2] SQL0204N "SAPASJ4.DB2QWPT2P" is an undefined name. SQLSTATE=42704
4 ETW000                                                                           40638 0.470875
4 ETW000 [dev trc     ,00000] Monitor for DB2 system not started. Retrieving EBCDIC CCSID from SYSIBM.SYSSTRINGS.
4 ETW000                                                                              42 0.470917
4 ETW000 [dbsldb2.    ,00000] *** ERROR => Retrieving EBCDIC CCSID from SYSIBM.SYSSTRINGS failed. Assuming EBCDIC CCSID 500.
4 ETW000                                                                           38219 0.509136
4 ETW000 [dev trc     ,00000] EBCDIC CCSID calculated from SYSIBM.SYSSTRINGS is 500 .
===================================================================================================

Hi lababe,
Welcome to the BlackBerry Support Community.
If your BlackBerry® Curve™ 9360 smartphone is unable to be detected by a computer due to the reboot loop, please connect your BlackBerry smartphone without the battery inserted and try to reload the BlackBerry® Device Software. Once the software load has already started, reinsert the battery.
For further instructions, please see: How to force the detection of the BlackBerry smartphone using Application Loader. www.blackberry.com/btsc/KB10144
Please note: This process will remove all data from your BlackBerry smartphone.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Data Not coming Properly for 0HR_PA_OS_1 Data Source?

Hi Experts,
I am trying to load data to 0PAOS_C01 using 0HR_PA_OS_1 data source. For field 0POS_OCCVAC key figure i am not getting any data from Data Source.
I checked in RSA3 for 0HR_PA_OS_1 data source and in that it is not populating data for filed OCC_VAC_PERC field. I checked with HR functional team and they mentioned its a BI issue.
Kindly tell me how can i populate values for the particular field. FYI i am getting correct data for other fields.
Please help me.
Thanks

The possible reasons
1.Your user id might not be having the proper authorization to pull the HR data.This you can confirm with your basis guy,if you are unable to find what are the authorization roles required for HR data, for the time being you can take SAP_ALL authorization in development box and try to pull.
OR
2.Try to pull from BW side,you may be able to see the data there because this uses the background user id used in RFC connection ( provided if your background user id having proper authorization ).

PDF not coming back for bigger selection

Hello all,
I need help in finding what is causing my performance problem in my template.
I had to alter an original template. I had to add stock records (coming from a separate data source) and also the formatting had to change. I added <xsl:decimal-format xdofo:ctx="begin" name="OPMAAK" decimal-separator="," grouping-separator="." NaN=" " zero-digit="0" infinity="-"/ > for this and also the correct formatting tag around each number.
After adding this, the BIP report runs twice as long and for the biggest selection (for all sales branches) I don't get a result anymore. After about 10 minutes, I get a 'Internet explorer cannot display' screen instead of my pdf
If anyone cares to check out my template, I can email it to you. I also have sample xml data for 1 sales branch (runs about 4-5 minutes on server, 63 pages in PDF format)
PS: I already looked at jvm settings, caching,... but maybe a good idea to review that as well?

Sounds like an overheating problem. You could try to reset the SMC and see if that helps, if not it probably needs to go to the shop.
Here is a link to how to reset the SMC on a new Mac
http://docs.info.apple.com/article.html?artnum=303446

System Not Calculating Taxes for Slab-Men.

Hi,
Before Applying the note i created entry for men in T7INT1, although system created a work bench request but the entry for MEN was not reflecting in T7INT1, i am not able to locate it, now the Note is applied & the entries are present.but i want to delete the manually created entry.
SL23 Income tax rates for men 01.04.2011 31.12.9999
I believe system is not able to read the slab properly as there are 2 slabs with same charectristics.i want to delete the manully created entry, where can i locate it as it is not present in T7INT1.

Hi
Please update the SAP HR Patch level instead of changeing manually.
This will reflecting in T7INT1.
Thanks & Regards
Vikram

Component level message are not coming up for the declarative component.

Hie
i am using ADF faces with jdev 11g.
i have created a declarative component and dropped it in my web application.
This component provides an action listener to write some app specific code.
in the listener i wrote a component level error message.
on running the app i can see that it is going to that error but it is not showing it up on the ui. same code works for other adf faces components that comes by default in the component pellete.
I tried setting the clientComponent attribute to true as well but no luck.
any idea if something wrong with declarative components?

Frank,
My declarative component is dropped on my jsff. In this pages i have dropped a af:messages as well.
There is a small button in my component on which i have bound an action listner.
In the action listener i have a validation on the failure condition of which i have the code like:
if(bean == null || bean.isAuthenticated() == false){
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "You must be logged in to vote up");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(getVotingQuesComponent().getClientId(context), msg);
AdfFacesContext.getCurrentInstance().addPartialTarget(getVotingQuesComponent());
return;
So, i m sure my flow is going in this part of code but i dont see the message coming up marking my declarative component.
However, if i replace this message by a page level error message then that comes up fine.

Sound not coming out for right headphone

If I press the headphone jack backwards, I can get sound coming out of both earpieces. However, if I just let it stand still, I can only hear it coming out of the left side. I tried different headphones, so it's the iPod and not the headphones.
My warranty expired 2 days ago (naturally) and I want to know if there's anyway to manually fix this. Or if it's possible to visit an Apple store to fix it.

1) Plug your headphones into another source, such as
a stereo. Does the problem still exist? If not, then
it is the iPod itself and not the headphones. If it
does still exist, then it is your headphones.
2) If under warranty, Apple will ship you a new set
of headphones for no charge as long as you return the
defective part in the envelope provided with the new
part they send you.
Oh gee, that's useful. So what's the fix if it's not the headphones?
I guess it's off to the apple store for me!
Does anyone else notice that all of us have no sound in right ear? Could it be an intrinsic flaw?

Required Delivery Date Not coming good for only few customers

Hi Gurus,
I have a very peculiar problem, related to the RDD (Required Delivery Date) in Sales Orders.
We have configured the system with D+2 as the delivery date and the system is proposing us the dates accordingly.
Also above VOV8 configuration of Proposing of Delivery Dates we have a user exit working (Don't know why they have design this user exit when we have a standard functionality of proposing of RDD) which is putting the RDD to D+1.
Now when we just enter into VA01
The system ll show us RDD as D+2. (as per VOV8 config)
When we put the customer no. and press enter the above mentioned user exit ll activated and changes the RDD to D+1
Now the main issue is that, for only few of the customers the system picks up the delivery date as D+1 without considering the next day which is Saturday (which is wrong as per business process as we don't deliver on Saturday's).
For all other customers the system ll propose a correct delivery date of Monday when we enter the order on Friday.
What ll be the solution for this??
Thanks in Advance
Ajay

Now the main issue is that, for only few of the customers the system
picks up the delivery date as D+1 without considering the next day
May be in the exit, any of the following would have been predefined to check
a) Account Group
b) Sales Area or Sales Office
c) Tax Classification
d) Account Assignment Group
Please compare this with one customer to whom, it is coming correctly.
thanks
G. Lakshmipathi

Data is not coming right for few Document nos.

Hi All,
I have a problem in my report that in 10-12 records, data not picking the values against Document Number...means from where i pick the lifnr, there a few records not showing related information...
I tell u in detail..
I pick Document Number from BSIK table, Purchasing Doc. No, with ref. to Document Number...Vendor Code with Purchasing Ref. and Vendor Name with Ref. to Vendor Code...
But in some document we have not maintain Purchasing document no. against Document Number...
So we cann't display Vendor Code and name...
This is the problem...
Now i have a link between Document Number and Vendor Code without Purchasing Document No...in BSEG table...
But what will the condition with my existing query on BSEG...please tell me....
My Code is---
REPORT zak_form_c4 NO STANDARD PAGE HEADING LINE-SIZE 125 .
TABLES : bsik,bkpf,bseg,j_1imovend,lfa1,t001,t005u,bsak,ekko,bsis, ekkn, anla, anlc.
TYPE-POOLS : slis.
DATA : BEGIN OF itab OCCURS 0,
       belnr LIKE bsik-belnr, "Document number
       buzei LIKE bseg-buzei, "line item
       hkont LIKE bseg-hkont, "Gl account
       mwskz LIKE bseg-mwskz, "Tax Code
       dmbtr LIKE bseg-dmbtr, "Amount
       ebeln LIKE bseg-ebeln, "Purchasing Document
       ebelp LIKE bseg-ebelp, "line item nbr
       hwbas LIKE bseg-hwbas, "Base amount
       shkzg LIKE bseg-shkzg, "Debit/Credit code
       gjahr LIKE bsik-gjahr, "Fiscal Year
       bldat LIKE bsik-bldat, "Document Date
       budat LIKE bsik-budat, "Posting Date
       lifnr LIKE bsik-lifnr, "Vendor number
       xblnr LIKE mkpf-xblnr, "Ven invoice nbr
       name1(25),                                           "name1
       ort01 LIKE lfa1-ort01, "City
       j_1ilstno LIKE j_1imovend-j_1ilstno, " Vendor tin nbr
       regio LIKE lfa1-regio, "Region Code
       bezei LIKE t005u-bezei, "Region desc
       dmbtr1 LIKE bseg-dmbtr, "Amount
       hwbas1 LIKE bseg-hwbas, "Base amount
END OF itab.
DATA:
v_bldat TYPE bldat,
v_budat TYPE budat,
v_lifnr TYPE lifnr,
v_name1 TYPE name1,
v_ebeln TYPE ebeln,
v_mwskz TYPE mwskz,
v_dmbtr TYPE dmbtr,
v_hwbas TYPE hwbas,
v_xblnr TYPE xblnr.
DATA : BEGIN OF itab1 OCCURS 0.
        INCLUDE STRUCTURE itab.
DATA:END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0.
        INCLUDE STRUCTURE itab.
DATA : END OF itab2.
DATA : itab3 LIKE STANDARD TABLE OF itab2 WITH HEADER LINE.
***********************************Purchase order history
DATA:   BEGIN OF bet OCCURS 50.
        INCLUDE STRUCTURE ekbe.
DATA:   END OF bet.
DATA:   BEGIN OF bzt OCCURS 50.
        INCLUDE STRUCTURE ekbz.
DATA:   END OF bzt.
DATA:   BEGIN OF betz OCCURS 50.
        INCLUDE STRUCTURE ekbez.
DATA:   END OF betz.
DATA:   BEGIN OF bets OCCURS 50.
        INCLUDE STRUCTURE ekbes.
DATA:   END OF bets.
DATA:   BEGIN OF xekbnk OCCURS 10.
        INCLUDE STRUCTURE ekbnk.
DATA:   END OF xekbnk.
DATA : w_container TYPE scrfname VALUE 'CL_GRID',
       w_cprog TYPE lvc_s_layo,
       g_repid LIKE sy-repid,
       w_save TYPE c,
       w_exit TYPE c,
       cl_grid TYPE REF TO cl_gui_alv_grid,
       cl_custom_container TYPE REF TO cl_gui_custom_container,
       it_fld_catalog TYPE slis_t_fieldcat_alv,
       wa_fld_catalog TYPE slis_t_fieldcat_alv WITH HEADER LINE ,
       layout TYPE slis_layout_alv,
       col_pos LIKE sy-cucol ,
       alvfc TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS       : hkont LIKE bseg-hkont OBLIGATORY. "GL Code
*SELECT-OPTIONS   : hkont FOR bseg-hkont .
SELECT-OPTIONS   : belnr FOR bsik-belnr .
SELECT-OPTIONS   : gjahr FOR bsik-gjahr .
SELECT-OPTIONS   : bldat FOR bsik-bldat.
SELECT-OPTIONS   : budat FOR bsik-budat.
SELECTION-SCREEN : END OF BLOCK b1.
PERFORM fill_catalog1 USING:
'HKONT'    'ITAB2'    'G/L Code' ,
'BELNR'    'ITAB2'    'Document Number',
'GJAHR'    'ITAB2'    'Year',
'BLDAT'    'ITAB2'    'Doc. date' ,
'BUDAT'    'ITAB2'    'Posting Date',
'LIFNR'    'ITAB2'    'Vendor',
'NAME1'    'ITAB2'    'Name',
'EBELN'    'ITAB2'    'Purchasing Document',
'MWSKZ'    'ITAB2'    'Tax Code',
'HWBAS'    'ITAB2'    'Base Amount',
'DMBTR'    'ITAB2'    'Tax Amount',
'XBLNR'    'ITAB2'    'Vendor Inv. No.'.
SELECT DISTINCT hkont belnr gjahr bldat budat INTO CORRESPONDING FIELDS OF TABLE itab
                  FROM bsis
                  WHERE bukrs = '1000'
                  AND hkont = hkont
                  AND belnr IN belnr
                  AND gjahr IN gjahr
                  AND bldat IN bldat
                  AND budat IN budat.
SORT itab BY belnr.
LOOP AT itab.
SELECT * FROM bseg WHERE belnr = itab-belnr AND gjahr = itab-gjahr
                                               AND bukrs = '1000'
                                               AND ( ebeln <> ' ' OR hkont = hkont ).
    IF sy-subrc = 0.
      itab-buzei = bseg-buzei.
      itab-mwskz = bseg-mwskz.
      IF bseg-ebeln <> ' '.
        itab-ebeln = bseg-ebeln.
        itab-ebelp = bseg-ebelp.
        MODIFY itab.
      ENDIF.
      IF bseg-hkont = hkont.
        itab-shkzg = bseg-shkzg.
        itab-hwbas = bseg-hwbas.
        itab-dmbtr = bseg-dmbtr.
        IF itab-shkzg = 'H'.
          itab-dmbtr = itab-dmbtr * ( -1 ).
        ENDIF.
        MOVE-CORRESPONDING itab TO itab2.
        APPEND itab2.
      ENDIF.
    ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT itab2.
SELECT SINGLE * FROM ekko WHERE ebeln = itab2-ebeln.
IF sy-subrc = 0.
    itab2-lifnr = ekko-lifnr.
ENDIF.
CALL FUNCTION 'ME_READ_HISTORY'
    EXPORTING
      ebeln = itab2-ebeln
      ebelp = itab2-ebelp
      webre = 'X'
    TABLES
      xekbe = bet
      xekbz = bzt
      xekbes = bets
      xekbez = betz
      xekbnk = xekbnk.
itab2-xblnr = bet-xblnr.
SELECT SINGLE * FROM lfa1 WHERE lifnr = itab2-lifnr.
itab2-name1 = lfa1-name1.
itab2-ort01 = lfa1-ort01.
itab2-regio = lfa1-regio.
SELECT SINGLE * FROM t005u WHERE bland = itab2-regio
                              AND spras = 'EN'
                              AND land1 = 'IN'.
itab2-bezei = t005u-bezei.
SELECT SINGLE * FROM j_1imovend WHERE lifnr = itab2-lifnr.
IF sy-subrc = 0 .
    itab2-j_1ilstno = j_1imovend-j_1ilstno. " Vendor tin nbr
ENDIF.
MODIFY itab2.
ENDLOOP.
SORT itab2 BY belnr.
LOOP AT itab2.
v_dmbtr = v_dmbtr + itab2-dmbtr.
v_hwbas = v_hwbas + itab2-hwbas.
v_bldat = itab2-bldat.
v_budat = itab2-budat.
v_lifnr = itab2-lifnr.
v_name1 = itab2-name1.
v_ebeln = itab2-ebeln.
v_mwskz = itab2-mwskz.
v_xblnr = itab2-xblnr.
AT END OF belnr.
    itab2-bldat = v_bldat.
    itab2-budat = v_budat.
    itab2-lifnr = v_lifnr.
    itab2-name1 = v_name1.
    itab2-ebeln = v_ebeln.
    itab2-mwskz = v_mwskz.
    itab2-dmbtr = v_dmbtr.
    itab2-hwbas = v_hwbas.
    itab2-xblnr = v_xblnr.
    APPEND itab2 TO itab3.
    CLEAR: itab2, v_dmbtr, v_hwbas, v_bldat, v_budat, v_lifnr, v_name1, v_ebeln, v_mwskz, v_xblnr.
ENDAT.
ENDLOOP.
layout-zebra = 'X' .
layout-colwidth_optimize(1) = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program = 'ZAK_FORM_C4'
    is_layout          = layout
    it_fieldcat        = it_fld_catalog
    i_default          = 'X'
    i_save             = 'A'
TABLES
    t_outtab           = itab3
EXCEPTIONS
    program_error      = 1
    OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*&      Form FILL_CATALOG1
*       text
*      -->P_FIELDNAME text
*      -->P_REF_TABLE text
*      -->P_SCRTEXT    text
FORM fill_catalog1 USING   p_fieldname TYPE any
                            p_ref_table TYPE any
                            p_scrtext   TYPE any.
CLEAR : wa_fld_catalog.
wa_fld_catalog-fieldname = p_fieldname.
wa_fld_catalog-tabname    = p_ref_table.
wa_fld_catalog-seltext_s = p_scrtext.
wa_fld_catalog-seltext_m = p_scrtext.
wa_fld_catalog-seltext_l = p_scrtext.
* wa_fld_catalog-datatype = 'CURR'.
wa_fld_catalog-outputlen = 20.
APPEND wa_fld_catalog TO it_fld_catalog.
ENDFORM.                    " fill_catalog1.
Plz help....
Edited by: Prince Kumar on Jan 16, 2009 12:29 PM
Edited by: Vijay Babu Dudla on Jan 16, 2009 4:27 AM

Hi Dear,
Thanks for reply....
I use this code, in the LOOP AT ITAB...
      IF bseg-ebeln = ' ' AND bseg-KOART eq 'K' .
        itab-lifnr = bseg-lifnr.
      ENDIF.
But, not working....means its not displaying Vendor name against Document Number in BSEG.
Plz let me know...How...where i can change,,,

Backlight not coming on for Leopard install

I'm trying to do a clean install of Leopard on my MacBook (Black). As normal, I'm booting from the Leopard DVD, but when it gets to the language selection screen on the setup, the backlight will not come on. If turns off just as the setup is loading. I've tried the obvious things, moving mouse, display buttons, etc. Anyone have any ideas? I've tapped around the laptop to see if there are any loose connections relating to the problem, no such luck. I've not had a problem with the display before, this is new!
Any help/advice much appreciated.

Just to add, I've done the following steps to try and resolve the problem.
- PRAM reset
- System Management reset

Intel iMac shutting off suddenly, not coming back for hours

Hello,
Last night my iMac suddenly shut off; I tried for about twenty minutes to turn it back on (I tried the power button, unplugging and replugging, changing outlets...), then gave up. This morning I tried it and it worked just fine, but after several hours it shut off again. That was about three hours ago and it hasn't come back yet. Curiously it shut off right before iSight was going to snap a picture in Photo Booth, and I just can't remember if that's when it happened last night too...
Any help?

Sounds like an overheating problem. You could try to reset the SMC and see if that helps, if not it probably needs to go to the shop.
Here is a link to how to reset the SMC on a new Mac
http://docs.info.apple.com/article.html?artnum=303446

System not coming up for PSS in AC 10.0

Similar Messages

Maybe you are looking for