SYSTEM_NOT_CONFIGURED_AS_XMB Error

Hi
I'm doing simple File to File scenario.. both sides i'm using Business Services only.. if i kept the file in the sender directory file was picking .. but the Reciver file was not loaded.. if i check in the RWB i'm getting the following Error..
SYSTEM_NOT_CONFIGURED_AS_XMB
i used both sides Business services only.. then why i'm getting this message.. i had gone through the several links also.. but they are telling we need to configure the systems in SLD.. but i'm using business services.. so, please provid eme the solution..
Thanks
Babu

Hi Babu !!
Check the OSS Note on this - 764176.
Follow all the steps as mentioned in this blog.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
just try this also----
>>>>>
run transaction SXMB_ADM
choose option as "Integration Engin Configuration"
then Edit > Change Global configuration Data"
and choose "Application System" as a Role of Business System.
& corresponding integartion server as "http://ipaddr:httpServicePort/sap/xi/engine?type=entry"
Regds
Abhishek

Similar Messages

SOAP Adapter Problem

Hi,
I 've the following scenario:
Legacy (File)->XI-(Split the message)-->Proxy
I receive the file, into XI, I split the message and send one message for each line, and send to proxy.
The communication channel for proxy is not able to with multiple structures, for solved it i have a communication channel SOAP Receiver and SOAP Send.
The systems are:
BS_LEG (Sender)
BS_XI
BS_SAP (Receiver)
In configuration i have:
Sender BS_LEG
Interface: MT_File_OUT
CC: CC_File_Send
Receiver: BS_XI
Interface: MT_File_ABS (Split)
CC:CC_SOAP_Rec
Message send one to one.
Sender: BS_XI
Interface:MT_File_ABS (Split)
CC: CC_SOAP_Send
Receiver: BS_SAP
Interface:MT_File_IN
CC: CC_Proxy_Rec
In Communication channel SOAP Adapter Receiver returns the following error:
SYSTEM_NOT_CONFIGURED_AS_XMB
I have check all configurations and it seems ok.
Please, could somebody help me? Thanks.
Gemma

Hello Gamma,
go thru the below threads might help
SYSTEM_NOT_CONFIGURED_AS_XMB
FTP2IDoc - SYSTEM_NOT_CONFIGURED_AS_XMB
SYSTEM_NOT_CONFIGURED_AS_XMB Error
Cheers
Agasthuri Doss

Error:INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB

in http->xi->file
when i use http sender adapter with http client
i got the error message as follow:
<SAP:Error><SAP:Category>XIServer</SAP:Category>
<SAP:Code>INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:Stack>System not configured as Integration Engine</SAP:Stack></SAP:Error>
any reply is appreciated
Thank you very much

Hi,
you can check:
- TCODE - SXMB_ADM
- integration server
- edit - change global config - check if you have: integration server set
Regards,
Suraj

Error in XI: INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB System not c

When I run program UKM_TRANSFER_ITEMS it throws the following error. I suspect from the error message it is related to XI but I don't know what it means. Does anybody know?
Message number is UKM_PI008

run transaction SXMB_ADM
choose option as "Integration Engin Configuration"
then Edit > Change Global configuration Data"
and choose "Application System" as a Role of Business System.
& corresponding integartion server as "http://ipaddr:httpServicePort/sap/xi/engine?type=entry"
example : http://172.25.8.117:8000/sap/xi/engine?type=entry
and save it

SYSTEM_NOT_CONFIGURED_AS_XMB

HI,
I have defined the communication channel for XI adapter for the receiver system and when i try to pass the vendor details from R/3 thro BD14 i am getting the following error in XI (SXMB_MONI)
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:Stack>System not configured as XI Integration Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Plz help me out i have checked in SXMB_ADM the role of the business system is HUB,
and i have also checked all the business system the sender and receiver system is Application system with the related integration server as XI server and the business system for the XI server the role is the integration server and corresponding URL as http://<host>:<port>/sap/xi/engine?type=entry.
Request you to guide me for this problem
Regards,
Anand

Anand,
enter the following in SXMB_ADM->IntergationEngineConfiguratin->sepcific configuration.
add the following.
Category:RUNTIME Parameter:IS_URL Value:http://<host>:<port>/sap/xi/engine?type=entry.
Regrards
Sreeram.G.Reddy

Error: System not configured as XI Integration Engine

Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
Rajesh

Hi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

SYSTEM_NOT_CONFIGURED_AS_XMB problem

Hi All,
     Am trying to construct a simple XI Scenario as described in the following blog.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
My application is able to read the xml file but the receiver is not able to get the file.Am trying this out with a single XI server installation as this is a simple type (Netweaver 2004s, SP9).When i checked the runtime workbench i found the following messages
Time Stamp Status Description
2008-05-16 16:32:59 Success Channel cc_xmlfile_sender: Send binary file "c:\XI_FILES\SENDER\xi_input.dat". Size 188 with QoS EO
2008-05-16 16:32:59 Success Application attempting to send an XI message asynchronously using connection AFW.
2008-05-16 16:32:59 Success Trying to put the message into the send queue.
2008-05-16 16:32:59 Success The message was successfully retrieved from the send queue.
2008-05-16 16:32:59 Success File "c:\XI_FILES\SENDER\xi_input.dat" deleted after processing
2008-05-16 16:32:59 Success The message status set to DLNG.
2008-05-16 16:32:59 Success Message successfully put into the queue.
2008-05-16 16:32:59 Success The application sent the message asynchronously using connection AFW. Returning to application.
2008-05-16 16:32:59 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText:   ErrorStack: System not configured as XI Integration Engine
2008-05-16 16:32:59 Error Transmitting the message to endpoint http://<sysname>:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
Can someone please help me out with this
Regards,
karthik

Hi,
   Thanks for that reply.As given in the blog which i have mentioned earlier am using Third party systems only.But still thereceiver is not able to receive the message.
This is the response of the check integration Engine Configuration Data
     Current Configuration (local):
     Role of Business System: Integration Server
     Client 001 is Integration Server
     Corresponding Integration Server: http://<sysname>:8000/sap/xi/engine?type=entry
     System Landscape:
     Role of Business System: Integration Server
     http://<sysname>:8000/sap/xi/engine?type=entry
     Comparison of Current Configuration with System Landscape
     Role of Business System: Current Configuration = System Landscape
     Corresponding Integration Server: Current Configuration = System Landscape
don't have a clue what the issue is???
Regards,
karthik

XI_J2EE_ADAPTER_XI_HANDLER Error

Hi Experts,
I have done file to idoc scenario and file to file scenario.
after activating the objects in integ.directory , i couldnt see the processed msgs in sxmb_moni for both scenario.
In RWB comoponent monitoring when i see communication channel monitor it shows only outbound msgs but both comm.channel functioning properly.even i could see the msgs in mesage monitoring(except outbound msgs). the outbound log shows the msg executed succesfully waiting in que. after some times it shows status: system error, error category:XI_J2EE_ADAPTER_XI_HANDLER , error code:SEND_CONSUMER_ERROR. I think the mesages not going in to integ.engine.
                i thought it might be a cache problem .So I execute the Tcode SXI_CACHE it shows following error 1,Unable to Refresh Cache Contents 2, Error During Last Attempt to Refresh Cache. i double click the above error it shows following details.
                                           Incorrect XML display for AlertCategory
                                            Error during deserialization
                                             Data loss occurred when converting 011136c23c9430359b57c0ef8949c630
     Can you give me the solution
Thanks
Raja Mohamed

Hi,
Check these threads...
Re: File is picked up but never show the XML message in SXMB_MONI
SYSTEM_NOT_CONFIGURED_AS_XMB
CCM2.0 Config in NW2004s (PI7.0) u0096 XI Error
Regds,
Pinangshuk.

Error while sending JDBC Results to XI

Dear members ,
I have configured a JDBC Sender based on PLain J2SE Adapter Engine.
When i start the adapter ,i get an error message
ERROR: Finished sending query result to Integration Engine with error "com.sap.aii.messaging.net.TransportException: Sending message '8ba707a0f78911d98f64c565c0a8004d' to Integration Server failed with 'SYSTEM_NOT_CONFIGURED_AS_XMB': '', context '?' , must retry". Skip confirmation and proceed with next query
Can anybody help me out.
My Configuration is as follows :-
jdbc adapter java class
classname=com.sap.aii.messaging.adapter.ModuleDB2XMB
version=30
mode=DB2XMB
Integration Engine address and document settings (example, see docu)
XI.TargetURL=http://hwsapxi:8000/sap/xi/engine?type=entry
XI.User=xiappluser
XI.Password=welcome1
XI.QualityOfService=EO
XI.SenderParty=
XI.SenderService=Factory_Sender
XI.ReceiverParty=
XI.ReceiverService=Factory_Receiver
XI.Interface=FactoryMessageInterface
XI.InterfaceNamespace=http://sap.com/factorydata

Ravindra,
It could be that the AE was not configured properly during installation. Please refer to the below link and see it helps you narrow down your problem.
Installation - Plain J2SE Adapter Engine
http://help.sap.com/saphelp_nw04/helpdata/en/b3/cc633c3a892251e10000000a114084/frameset.htm
regards,
SK

Error while developing Custom Module in PI

Hi Friends,
We have developed Module for converting XL file to XML file and deployed on PI server. We have followed the link
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
We got the following error, please help in this:
Received XI System Error. Error Code:SYSTEM_NOT_COFIGURED_AS_XMB Error Text: ErrorStack:System not configured as XI Integration Engine
Transmitting the message to endpoint http://BASIS1:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException:SYSTEM_NOT_CONFIGURED_AS_XMB.
Regards,
Lakshmi Prasad.

Hi Lakshmi,
it is missing role "Integration Server" at transaction SXMB_ADM / Configuration Integration Engine.
Regards,
Udo

CCM2.0 Config in NW2004s (PI7.0) u0096 XI Error

Ive run into the following error in SRM after running program BBP_CCM_TRANSFER_CATALOG. Can someone please tell me what it means and hopefully how to correct it?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>System not configured as XI Integration Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I followed the CCM 2.0 cookbook instructions but obviously I made a mistake or I missed something. Ive configured both MasterDataInclusionInCatalogOnWAS700 and CatalogeUploadWAS700 scenarios. Im a little unsure whether the MasterDataInclusionInCatalogOnWAS700 is defined correctly as the instructions were very vague and assumed ones XI knowledge is grater than mine.
Also, can someone please explain to me which scenario (the CatalogeUpload or MasterDataInclusion) is required when you execute program BBP_CCM_TRANSFER_CATALOG?
Regards,
Jerry

Hi Prasad,
Here is the information from the trace, I'm not sure how to interpret this message:
<Trace level="1" type="T">Get definition of external pipeline SENDER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_SENDER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INTEGRATION_SERVER" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="T">URL for integration server read from global configuration</Trace>
<Trace level="1" type="T">URL= dest://INTEGRATION_SERVER_DX1</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
Does the trace end with the last successfully processed record or the one that caused the error?
Jerry

Client Proxy error

Hi friends,
My scnario is Proxy to JDBC.
In this when i went to test my proxy interface.. i got this error..
<CODE>INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB</CODE>
<ERRORTEXT>System not configured as XI Integration Engine</ERRORTEXT>
please rectify..
Regards
Vijay Kumar

Hi,
Now that is solved.. and i have testing the interface from Menu-Proxy-Testinterface..
i got this <SUCCESS>Services Processed Without Error</SUCCESS>
but when i check the same thing while executing report i am not getting any messages in monitoring ..
and one more thing i have checking the configuration test in both sides XI and R/3 at second test i got error
the test is
The HTTP Framework of the Web Application Server Must Run Correctly
=> Check with report SPROX_CHECK_HTTP_COMMUNICATION
If necessary, contact your system administrator. Please note that
the the HTTP framework belongs to the application server. The result
can therefore looks different on different application servers.
i got this error..
HTTP communication contains errors (see long text for diagnosis)
Message no. SPRX086
i think even error we have to solve... please help me to solve this error..
Regards
vijay

Error During Proxy client changing

Hi All,
I have a Webservice to Proxy synchronous scenario.
The scenario is working for client 210 of SAP system but it is giving an error for 260 of SAP system when i changed the client in CC and test the scenario.
The error says in the moni "INTERNAL">SYSTEM_NOT_CONFIGURED_AS_XMB".
Can some body help me what changes we have to do for different clients of the system.
Helpful answers will be rewarded points.
Thank & Regards,
RK

HI,
You need to do the configuration in 260 of SAP system. Run transaction SXMB_ADM and then navigate as mention blow.
Integration Engine Configuration ---> Under Role of Business System enter "Application System".
Under Corresponding Integ. Server, enter the rfc destination "dest://xxx" .
To know the rfc destination, goto SM59 and check the connection type 'H', here you will find the RFC destination, just copy it from here.
You can find all the info in this blog step no 2 under "Configuration Business system as local Integration Engine".
How do you activate ABAP Proxies?
Regards,
Sarvesh

Error in starting Adobe Bridge in Photoshop CS2

I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
I have reinstalled and click repair but to no avail
I followed Adobe Support Knowledgebase solution and run CMD and this appears:
c:Documents and Settings/Jesus M Ferraris>
then i entered the command
cacls c:\windows\installer /T /E /C /G administrators:F
but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
I also entered the next command
cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
still the same error as above appears, Please help, have I miss something or was my procedure correct...
P4, 512ram, WXP 80gHD

Very useful.
Good Luck.
My
Si
tes

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

SYSTEM_NOT_CONFIGURED_AS_XMB Error

Similar Messages

Maybe you are looking for