System not modified

I cannot open a pdf sent to me because I get the following message: setup had detected that you already have a more functional product.   Adobe Reader 9 Setup interrupted before it could completely install.  Your system has not been modified, please setup again.

That sounds like some kind of installer is starting instead of the actual Reader.  I suggest that you uninstall Adobe Reader, then install it again.

Similar Messages

  • SYSTEM NOT MODIFIED TO RUN ITUNES 11.1

    itunes 11.1 is not being updated in the system and the following message is displayed
    SYSTEM NOT MODIFIED TO RUN ITUNES 11.1

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Will not install itunes 8, system not modified message

    Hello,
    I cannot install itunes 8, my computer stopped loading itunes so I removed old program and downloaded new version. Now it begins and then rolls back action and says system not modified. I even had my computer guy work on it and could not figure it out. I have done the installer thing. I've had problems with my MSN, I go through mozilla.
    Thanks for any help.

    I tried all of that, no luck.    Did I mention that iTunes is gone from my desktop? This is not the first time that has happened either.   I have deleted iTunes download and reloaded it. restarted computer, nothing.  In process of downloading installer yet again.  And will try yet again.   Thank you for the reply though.

  • ITunes will not install - System not modified?

    Hello,
    I keep having problems downloading iTunes on my computer. Once the installer starts running, it ends with the following message:
    "iTunes Installer Completed
    The installer encountered errors before iTunes could be configured.
    Errors occured during installation. Your system has not been modified.
    Please run the installer again, or click Finish to exit."
    If anyone has had this problem on their PC and found success, I would be glad to hear the steps and solutions that worked.
    Thank you!

    I had the same problem.I tried every solutions on the net but nothing worked.Luckily on that very day my free avast antivirus date expired(I dont currently have a paid antivirus) and I uninstalled it.Then I tried to install itunes and did it on the first go.But I am using a windows 7 32 bit so it might not work for you as you are on the 64 bit.Actually the antivrus was the culprit.Hope it helps.Thanks

  • Can't install i-tunes....problem says...system not modified.....not privileges to access this directory

    I had to uninstall my iTunes.....Can't install again...tried 3 times and each time messages read:  1.  Systam has not been modified.  2. Installer has insufficient privilages to access this directory; C:\Program Files\iTunes  3. Log on as administrator or contact your administrator
    Thanks.  Jankeys

    It appears that your user account on your Windows machine is not the system administrator. You are using a limited account most likely.
    iTunes will have some issues if used under a limited account.
    Go into: Start > Control Panel > Users
         See which account is listed as the system administrator. Login to that account and you can promote your main account to system admin from there. Restart your computer if this worked.
    If there isn't a system admin listed, there may be parental control software installed preventing you from accessing these settings.
    Try installing any other program. (web browsers are good to try cause they are free)
    If you are denied access to installing other programs, your user account is not system admin.

  • CONS System Not Modifiable

    I want to Change couple of Design objects(especially imported XSLT Mapping Files) in the CONS Box. But the change option is disabled. Our Basis person was telling that he didnt do any diff configuration in CONS.
    We are using CMS to transport.
    Is there any setting to make CONS modifiable?
    Thanks,
    Rajesh.

    Hi Rajesh,
    Try setting 'Objects Are Modifiabale' and Objects Are Original Objects property for your SWCV.
    Also check this link for more information on these properties...
    http://help.sap.com/saphelp_nw04/helpdata/en/42/ed903cf6c4492ce10000000a114084/content.htm
    Regards
    Anand

  • I cannot install itunes on my windown 7 laptop.  Error says "computer not modified".  Please help me with this problem.

    I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7.  Error says " computer/system not modified".  Please help me with this problem. 

    Hello there, jag123059.
    The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • OB52 :- Open and Close Posting periods Due to not modifiable of  PRD system

    Dear All,
    Due to not modifiable status two transaction could't be done in the PRD  System.
    This is IMG activity under the following.
    1. OB52 :- Open and Close Posting periods (FA -> FA Global Setting -> Document ->Posting -> Open and Close Postinfg periods
    2. OB08 :- Enter Foriegn exchange rate. (Gen Settings) Enter foriegn exchange rate
    These transaction are to be executed regularly and directly in the ECC6.0 Production system is not possible due to non modifiable status.
    Please help me regarding this issue

    Check Note 77430 - Customizing: Current settings
    Markus

  • TS4071 I am trying to download Itunes but it is saying my system is not modified for it. I am running on a 32 bit system whatever that means. Please help!!!

    I am trying to download itunes and it's not letting me it keeps telling me that my system is not modified for it. What do I do??? Help!!!

    This is a Microsoft Windows Issue.
    From a MS Support Engineer:
    "Hi,
    ·        Is the computer on a domain?
    ·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
    Try the steps below and check if it helps.
    Step 1:
    Run the software setup file as an administrator and check if it helps.
    a. Right click on the setup file of the software that you are trying to install.
    b. Select “Run as administrator”.
    Step 2:
    Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
    Disable antivirus software
    Warning:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 3:
    a. Click Start, type "Local Security Policy" (without quotes) and press enter.
    b. Click on Software Restriction Policies.
    c. In the right pane, double click on the "enforcement".
    d. Select “All users except local administrators”.
    e. Click Ok and restart the computer and check if the issue is fixed."

  • OVR1 and SR10 not modifiable in production system.

    Hi all,
    We would like tcode OVR1 and SR10 to be executable in our production system.
    We want to skip the change request needed to push the new entries from our development all the way to our production system. I want only to activated the possibility to create the OVR1, SR10, SR11 and SR12.
    Here is the message we get when we try to create in our production system
    Message no. TK430
    Diagnosis
    The system administrator has set your logon client to the 'not modifiable' status.
    Client-specific objects can not be changed in this client.
    System Response
    The function terminates.
    Procedure
    Contact the system administrator.
    For more information, see the SAP Library under Change and Transport System.
    Regards!
    Curtis

    To All,
    The OSS Note 812002 will deactivate the transport requirement.
    There's a config in Solution Manager that must be set also.
    When I get the full Solution I will post it here.
    Regards!
    Curtis

  • [ECC6 - se06] - how to set System Change Option / subentries to modifiable or not modifiable

    When the customizing is set to "modifiable" we have to set all thesub items to "modifiable".
    What is the parameter to make all the sub items under Global Settings to modifiable or not modifiable.
    In fact, it is very long and not so interesting to set all sub items each time we are requested to open Customizing.

    Thank you Reagan,
    I think I wasn't precise enough.
    As I tried to show in my snapshot, I agree that I can change all the under items but that is my problem.
    How to make them ALL selected when you set the parent "Global Seting" to modifiable.

  • DOWN PAYMENT AMOUNT FIELD NEEDS TO BE NOT MODIFIABLE IN PAYMENT REQUEST

    Hi
    In SAP, when Down Payment is called through Payment Request, the "amount" field will be changeable mode.
    My client requirement is that, the amount field should be in "not modifiable" status.
    Is there anyway that we can do this...using EXIT or something....
    Thanks in advance...
    Srikanth M

    Hi,
    system will not allow to change the Vendor line item.
    F-47 Down pyamnet request 10000
    f-48  you need to select the above request
           and enter the 10000 in bank gl line.
    you cannot change the vendor line while f-48.
    i hope will clearify your issue.
    reg
    Mmadhu M

  • How to modify  a table without  setting system to modifiable

    Hi All
    Is there a way to modify a table without setting the system to modifiable either in SCC4 or SE06.
    We locked SCC4 in our system , however one tables are not able to modify.
    table name YAUTM
    Is there a way to bypass this?
    Edited by: Shou Woon Wee on Jan 11, 2008 3:09 AM

    Hi Shou......
    if it gives you a message....."the client is not modifiable"/ ALIAS "table not modifiable"  ...then from a security perspective....you cant, and you might not want to bypass it!
    SCC4 settings are meant to be for that!  Contact your Basis team for this.
    The only way to bypass this is thru ....sending changes through a transport request.
    Curiosity: what environment are you trying this out ? cant be sandbox or DEV!
    Regards
    Abhishek

  • DTR workspace is not modifiable-not able to EDIT track DC- in NWDS.

    Hi,
    i am not able to EDIT in my project that i creted from ESS track of NWDI.
    i am getting the following error:-
    Checkout is not possible. See below for details.
    Component com.sap.xss.hr.per.us.bank.cc.CcPerBank
    ======>problem: DTR workspace is not modifiable /DID_ZTECH_Dessusbanksap.com/Model Folder/src/packages/com/sap/xss/hr/per/us/bank/cc/CcPerBank.txvWDComponentDiagram
    ======>problem: DTR workspace is not modifiable /DID_ZTECH_Dessusbanksap.com/src/packages/com/sap/xss/hr/per/us/bank/cc/CcPerBank.wdcomponent
    please suggest me the needful
    thanks
    Narpal

    ok thank for reply.
    i can modify now my code but when i have created the track i have given my development server details under runtime. But i chaned that once QA1 by mistake and later relized then again reverted back to development.
    so in this case do i need to import/check-in all software component again in my track?
    Now i am having the original system details.(that i gave at the time of track creation and import ESS).
    thanks
    Narpal S Sihag

  • How to make a BW system non-modifiable?

    Hello,
    How do i do that? Also what if i have to keep only the infopackages open for creation?
    Regards,
    aby

    Hello Abhijit
    To make a SAP BW system non-modifiable you have to do at least the following:
    1. TCODE SCC4 --> double-click on your client --> Changes and transports for Client-specific Objects should be set to “No changes allowed”.
    2. TCODE SE06 --> click on System change option (you have to have the necessary authorization, or else you can not see the button at top) --> Set the global settings to non-modifiable (Be careful here: <b>a.</b> Software Component <i>"LOCAL"</i> has to have the status modifiable – read more about it in the section about transports on help.sap.com. <b>b.</b> I will suggest that you take a snap shot of your settings before changing them to non-modifiable.)
    3. Regarding your question about InfoPackages I will suggest that you watch Luis Orama's e-learning session about BW transports on this site. But a quick answer to your question is that this is possible.
    TCODE RSOR (Transport Connections) --> Click on "Object Changeability".
    Good luck
    /FZA

Maybe you are looking for