System Not Picking Permitted Payee address when the Main vendor has PO Box.

Hi,
When we are doing payments to Permitted Payee ( Vendor ) the system is printing the checks with PO Box ( Post Box no. ) number of the Main vendor .
But when we deleted the PO Box number field in Main vendor, then the system is printing the check with Permitted payee address.
When Main vendor number has PO Box field populated with a number, selected credit address ( Permitted Payee address ) will not print on check.
When there is a Permitted Payee the system has to consider that Permitted Payee address only. But system is not doing like that.
Please advice what is the problem.
( They are paying through APP run ).

Can you please tell me where it is.
Thanks for your prompt reply.

Similar Messages

  • Is there a way for internal DHCP Scope to release scope addresses when the wifi client has disconnected?

    DHCP scope is configured on a WLC 5508.
    I'm checking if there' a way for WLC to clear the dhcp leasing when a user is diconnected from wireless?

    Unless the client sends a DHCP Release upon disconnect, which is not mandaded in the protocol, the lease will simply remain until it has expired.  If you're concerned with running out of leases, you only have 2 options. 
    1. reduce the lease time of your dhcp scope
    2. increase the network size to accomodate more usable addresses.
    There isn't a way to force a DHCP address lease to be "cleared" from the WLC simply because the client was disconnected.

  • Payment is not going to the permitted payee address

    Hi,
    I have assigned permitted payee in the vendor master record of vendor. After that i executed payment program and i am finding that payment is going to the headoffice instead of permitted payee and also in the proposal and payment list it is not reflecting permitted payee address. Here it is only showing vendor number and its address.
    Can anyboday help me on this or let me know whether i need to maintain any setting anywhere so that i can get permitted payee details in payment list.
    Also is permitted payee and alternative payee both are same or is there any difference in between this two.
    Regards,
    Sree

    Hi Jayaram,
                     I didn't maintained that in the alternative payee in the company code data of the vendor master. i will do that and let you know.
    But when i am posting any invoice through FB60, then in the payment data option we are having payee field. So when i am clicking F4 there it is not giving me any details. Is it ok or it will not pick that values.
    Reards,
    Sree

  • Manual BRS system not picking the doc for clearing the payment

    While processing Manual bank statement if i am  using referance doc no system not picking doc no for clearing the bank payment. So that after finishing BRs I am matching the doc manually, in f-04. This is taking long time for processing. Anyone can tell me why ref doc no not working and to make it to work, or else any problem is there to use the field. please solve my query.
    Edited by: MANISFICO1 on Aug 1, 2011 11:49 AM

    Hi:
           Please follow as given and hopefully you will be able to resolve the issue.
    1...Go to SPRO...Financial Accounting....Bank...Business transactions...Payment Transactions...Manual Bank Statement..Create a new transaction with sign - and do not assign anything in posting rule for now and enter 15 in Algorithm field , save.
    2...In define posting keys and posting rules...create an account symbol for the one you did in step 1..In Assign account to account symbol please use account symbol created earlier and acc mode + and currency should be + too. In GL Account area please list the outgoing GL which you are using for outgoing postings..
    In create key for posting rule define a posting rule and now go back to step 1 and assign the posting rule you created to the transaction type
    In define posting rules please maintain posting rule as define above...in posting area assign 1. give nothing in first posting key.assign account symbol as created earlier...now give give posting key 50..give account credit Bank...and a suitable document you use for posting BRS...In posting type give 4.
    Your Manual Bank statement is ready ....
    Go to FS00 select your bank outgoing GL account there and in create/bank.interest tab double click on Field status group..in general data make assignment number mandatory for posting...
    Go to FB50....post and outgoing transaction using the GL given above it will require you to enter assignment number enter 123 and post.
    In FF67 Select the new statement , proceed with your normal data entry and give the transaction you created in above , enter value date, amount and in bank ref field enter 123 as given in FB50.
    Save and post it. Now it should work.
    Regards

  • We have a 5s active on our account.  After turning on a previously active 4s (it had the same number)  The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up.  Texting over the cell networks works fine.

    We have a 5s active on our account.  After turning on a previously active 4s (it had the same number)  The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up.  Texting over the cell networks works fine.  Any suggestions??

    hens0861,
    Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
    KarenC_VZW
    Follow us on Twitter @VZWSupport

  • How does system automatically picks up document type when you enter INV?

    1.How does system automatically picks up document type when you enter Invoice?
    2.What is Algorithms? Where is it used?
    3.What is the use of Customer Ledger Inquiry?

    The document type is hard coded by the system. Look at UDC table 00/DT for the document types in your system. Notice that some of those are marked as hard coded/reserved by JDE. You may wish to dowload the Accounts Receivable manual and read that to learn more about the document types.
    Not sure what you mean by algorithm, unless you are looking for how the system determines what document type to assign on invoice entry.
    These comments apply to accounts receivable and to JDE World, since you posted in the JDE World forum and are talking about the customer ledger inquiry. If you are in Enterprise One and asking about Accounts Payable, then this reply can be ignored (though Enterprise One works pretty similar to World in this respect).
    What is the use of the Customer Ledger Inquiry. To view accounts receivable detail history for a given customer, viewing on line. Whomever works in the accounts receivable department will likely use the Customer Ledger Inquiry quite a bit.
    Hope this helps a bit.
    John Dickey

  • Bridge Does Not Automatically Bring Up Photoshop When the Photo is Double-Clicked

    I have just purchased CS4 with Bridge for my new MacIntosh.  In Bridge for the PC, when I double click a photo it automatically brings up Photoshop.  On the Mac version, it gives me an error message saying that part of the application is not loaded.  I completely uninstalled the program, and reloaded the application and still get the same message.  So in Bridge on the Mac, to get around this, I right click the picture and go to "Open With" and there are two entries:  "Open with CS4 (default)" and "Open with CS4."  This works if I pick either option.  My Windows version only has "Open with CS4 (default)" as the option.
    I called Adobe support (in India?) with no solution.
    I really like the double click option rather that using the pop-out menu choice.  What is wrong with the Mac install, and how can I fix this issue?

    Thank you for your help.  I updated the software and it "healed" itself.
    Best regards,
    Gregory T. Stramat
    [email protected]
    801-978-4735 (Office - Preferred)
    801-652-0775 (Mobile)
    Omke Oudeman <[email protected]>
    01/22/2010 12:52 AM
    Please respond to
    [email protected]
    To
    Gregory Stramat <[email protected]>
    cc
    Subject
    Bridge Does Not Automatically Bring Up Photoshop When
    the Photo is Double-Clicked
    This might mean that you have either 2 installs of CS4 (one on an other
    disk?) or you did not use the the default application folder on root level
    but have it installed in the user account application folder. Could you
    check this?
    and go to "Open With" and there are two entries:

  • My Photoshop elements 11 and 13 organizer suddenly exits. photoshop elements is not responding. Message occurs when the error is found. solicit help

    My Photoshop elements 11 and 13 organizer suddenly exits. photoshop elements is not responding. Message occurs when the error is found. solicit help, That's all.

    We really cannot know. So far you haven't told us anything about your system nor is there any feasible way to diagnose what this "missing file" could be, no matter what. That is, short of elaborate tracking and observation using specialised system diagnosis tools. The welcome screens can be brough back via the Help menu, but well, this might bring back the problems as well. Anyway, this is most likely nothing that a forum can help you with. If you know a computer geek, give him a call. Otherwise I don't see what we could do for you.
    Mylenium

  • Why does aol not auto enter email addresses when I compose an email?

    why does aol not auto enter email addresses when I compose an email?

    what a ridiculous decision to change from "starts with" to "contains".
    I have a further problem - having selected the address I want from the umpteen options pulled from my address book, I then press enter to add another line for another address.....and the first address I selected changes to a completely different address!
    And also addresses from the address book which previously appeared only in black now randomly appear in red.
    help please!

  • Why does my apple I'd not verify my email address when I try to sign in to iMessage?

    Why does my apple ID not verify my email address when I try to sign into iMessage

    It's a commun problem with IOS 6 and it depends in which country you are trying to activate the iMessage maybe it's blocked from the goverment ...

  • WRT54GS Not picking up ip address

    I have a WRT54GS router, set it up about a year ago, and it's been working all this time just fine. The only thing is that I wanted to modify its settings a couple days ago and forgot the admin password I had set it to. So I reset the router. Should be no big deal but the problem is that it now will not get an ip address from the cable modem (Time Warner). I've powered down the cable modem (and yes I removed the back up battery) and the router and restarted them in prober order. No ip address. Then I updated the firmware on the router, reset the modems and still no ip address from the cable modem. I know that the cable modem's DHCP is working because my lap top can connect to it and get an ip address. The wireless on the router works, and when connected by ethernet to any of the four ports I get an ip address from the router just fine. I've worked with a lot of routers over the years and have never run into a problem like this. I'm stumped. Does anyone have a suggestion?
    Thanks,
    --Matt

    After resetting your router you lost it's configuration and there was a need to re-configure it...
    As your Internet Service Providor is Cable(Time Warner) you should always follow this link to re-configure your router...

  • Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

    Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue....  This thing is so annoying when trying to go somewhere i just want the error message to go away.

    In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
    http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

  • When I type a web address into the main bar, it takes me to search results rather than to the website as in Firefox 3. What can I do here?

    As stated above, when I would enter a web address in the main bar at the top of Firefox, the browser would go directly to that website (e.g., nytimes, or pcmag, etc...).
    Now it goes to a search results page, where I have to click on NY Times, or PC Mag, to get to the website. It is a two-step process instead of one!

    hello, enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''browser.urlbar.trimURLs'''. double-click it and change its value to '''false''' in order to display the full url with the http://-prefix in the address bar...

  • Folder Redirection policy is not applied to a user, when the server target is changed, but works after resetting the windows profile.

    Folder Redirection policy is not applied to a user, when the server target is changed. 
    After server target is changed via group policy, when user login  (roaming profile)first time, the the new server target has not been applied, instead it's pointing to the old folder redirection path.
    But if we reset the windows profile (roaming ), the new folder redirection works, can you please specify a solutions that the new folder redirection works when the user login for the first time. so it reduce the time on resetting users profile.
    it seems that we need to delete the old folder redirection path from the user profile (roaming user profile) via group policy or similar solutions..
    Many Thanks

    >   But when the specific users login they all get the same error, it
    Is the old server removed from the domain? Seems so - or some other
    authentication related issue, hard to tell from here...
    > seems that the roaming user profiles still keeps the old server details,
    Yes - if you change redirection targets, FR moves content from old to
    new, and only if this ends sucessfully, it will update the redirection
    target.
    Make the old redirection target accessible to the user and you'll be fine.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • I have purchased apps for my ipod touch and they are not loading properly.  They appear on the screen, however when I touch them, they do not load and bounce back to the main screen.  Any suggestions on how to fix?

    I have purchased apps for my ipod touch and they are not loading properly.  They appear on the screen, but when you touch them, they do not open and bounce back to the main screen.  Any ideas on how to fix?

    Try the basics from the manual:
    restart.
    reset.
    restore.
    iPod touch User Guide (For iOS 4.3 Software)

Maybe you are looking for