System not re-installing Microphoto player, stuck in install/fail lo

I recently upgraded my hard dri'ves and, after some reinstalling and troubleshooting, most everything is back up and running... except my Zen Microphoto.
Whenever I plug it into a USB port, XP detects it as an "MTP Device" and tries to install the drivers. But the install fails and, instead of giving an error message or some kind of user options, it tries to install again... and fails again... and retries... and fails... Eventually, I have to pull the plug, literally, to stop the cycle of madness.
It was working normally before the upgrades, and now this. Is there some driver I can download to get it installed properly again? Are there some services I need started for proper installation?

Your former paster shouldn't have copied the Snow Leopard disk and sent you a copy, rather should have sent you the disk itself.
Who knows what or where that DMG came from, it might be from the Internet and compromised.
You should order the 10.6.3 Snow Leopard white retail disks from Apple, then use those, they are cheap enough anyway.
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks

Similar Messages

IP6700D Canon driver install fails w/ "non INTEL" message

Howdy.. I have a brand new, out of box L305D-S5938 Satellite system.
I need to install the printer driver on this system, however, the install "fails" claiming this is not an "Intel x86 platform".. that is correct as this is an AMD system.
Any hints on how to resolve this install?
The file from Canon is ip6700dvst200ej
Peace...
Channing

Satellite L305D-S5938
..the 64 bit driver
Absolutely! According to the specs above, you have a 64-bit version of Windows.
The good news is that you have access to the whole 4 GB of memory.
The bad news is that you'll run across occasional programs that won't run. In particular, no DOS or 16-bit Windows programs are supported.
-Jerry

Oops, something is not right... Flash Plug-In Warning Explanation: You do not have the Flash player installed on your browser. How to Fix the Problem: This game requires the Flash plug-in. Download the latest Flash player now.

When I try to play certain games on pogo, I get this: Oops, something is not right...
Flash Plug-In Warning
Explanation:
You do not have the Flash player installed on your browser.
How to Fix the Problem:
This game requires the Flash plug-in.
Download the latest Flash player now.
So I download latest still get error message

It is best to go to the source, Adobe, to get their software and updates. Sometimes malware can infect sites with messages that appear legitimate, but will, instead, install malware/virus/trojan on your system. Read the following carefully to install and/or update Adobe Flash.
There are 2 versions of Adobe Flash; an '''ActiveX version''' for IE only and a '''Plugin version''' for most other browsers including Firefox. On a Windows system, you should always update both individually. '''''You do not have Adobe Flash (aka "Shockwave Flash" in Add-ons > Plugins) installed.'''''
#'''Using Firefox''', go to the following direct download link and SAVE the download to your desktop so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#Direct link ActiveX version for IE '''''only''''': http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

Software updates: my Mac OS 10.6.6 will not connect to update server and "no system permission to install"

Requesting an update to 3.6.23 also 7.0.1, so told "unable to update" because I do not have system permission to install. Who is/ are system administrator(s) and what accounts would give me permission to install ?

You may get faster and better answers if you post in the Acrobat forum, Acrobat. This is the free Reader one.

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go.

System Profiler will not recognize installed hard drive if drive is in use by VMWare

System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
Example:
In the Terminal, I enter the following command.
system_profiler SPStorageDataType
Then it returns this information.
Storage:
    Lion Client:
      Available: 217.84 GB (217,836,306,432 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
    BOOTCAMP:
      Available: 255.58 GB (255,575,560,192 bytes)
      Capacity: 319.79 GB (319,790,510,080 bytes)
      Mount Point: /Volumes/BOOTCAMP
      File System: NTFS
      Writable: No
      Ignore Ownership: Yes
      BSD Name: disk1s2
      Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
Storage:
    Lion Client:
      Available: 213.39 GB (213,392,244,736 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
The Boot Camp Drive is no longer listed.
I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

Thank you for your response.
VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

Why can not I install iTunes on Win 7 installation appears every time the next sunrise; service, apple mobile device, failed to start verify that you have sufficient privileges to start system services Please help me

Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
service, apple mobile device,
failed to start verify that you have sufficient privileges
to start system services
Please help me

The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)

Hi Experts I´m facing this issue.
This is tp version 340.16.41 (release 640)
HALT 20091029110915
ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)
ERROR: EXIT(16) -> process ID is: 9660
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0233
standard output from tp and from tools called by tp:
Any Clue?

Hi,
Was the system copied from another system? Or is this a new installation?
If yes, did you run SE06 after the installation?
What is the results of trans.log (generated from R3trans -d)?
Also paste the contents of table TADIR in SE16.
Best regards,
Warren

When dowloading itunes, constantly get error message 'Apple Mobile Device -could not be installed- Verify you have sufficient privileges to install system services.

When downloading itunes to my pc, get error message 'Apple mobile device could not be installed - verify you have sufficient privileges to install system services'
i am forced to abort/cancel. Can anyone help please?

Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated.

Itunes 10.2.2 not installing message is -Service 'ipad service'could not be installed. verify that you have sufficient privelge to install system services . I have windows 7 , am administrator in windows 7, but i have an iphone not an ipad, Hints?

I tunes tries to update over and over again to 10.2.2. Each time it fails and lists message"Service 'ipad service'could not be installed. Verify that you have sufficient privelege to install system services."
I have an iphone and use itunes to update it. I do not have an ipad if that is an issue. Is this problem related to apple, or to Windows vista? I am system administrator on Windows 7 so the problem must be related to apple. I would appreciate a clue as to what I need to do. Or are there sufficient problems with 10.2.2 that I should be happy it will not update? This problem is getting beyond annoying since i have work to do other than cater to apple itunes.

I would say it is Windows.
Which are you using btw, Vista or 7?
And did you download the 64-bit version if that is what you run?
There were a lot of tips to troubleshoot (never needed to in 4 yrs though knock on wood).
Uninstall itunes
run chckdsk and sfc /scannow
CCleaner 3.05
If 7 did you upgrade to SP1? Driver Sweeper has been known to cause some problems with Windows 7 SP1
Trouble installing iTunes or QuickTime Windows
iTunes Troubleshooting quits, freezes, or launch issues

Adobe Flash Player Could Not Be Installed

OS 10.9.3
iMac 27-inch, Late 2009
AdobeFlashPlayerInstaller_14au_ltrosxd_aaa_aih.dmg
Install Adobe Flash Player Version 2.0.2.7
Safari Version 7.0.3
Hi:
I keep getting the above error when attempting the installation. I used the uninstall program from Adobe, but when I try to reinstall the same error occurs.
I've also twice done the clean install that has worked the last two times I need to upgrade flash at http://forums.adobe.com/thread/1267823 to no avail.
Any advice appreciated!
Thank you!
PS If anyone has any contacts with Adobe, it would be super if they could ask them to remedy this update problem once and for all. On this particular iMac every single time I try to update I waste an hour or two doing clean installs (which have previously worked, but not this time), a less than productive use of time. Our department IT folks say that we must upgrade because of all of the security flaws in Flash, so we don't have the option of staying with the older tried and true working versions

Sorry about the delay in getting back to you; just very busy. Here are the log files from my last attempt:
2014-06-14 14:38:37 -0600 [I] IM: ---------- log start ----------
2014-06-14 14:38:37 -0600 [I] IM: All install checks pass
2014-06-14 14:38:37 -0600 [W] IM: Unexpected umask value for process: 0
2014-06-14 14:38:37 -0600 [I] IM: User does not have any processes that need to be closed.
2014-06-14 14:38:37 -0600 [I] IM: [install started]
2014-06-14 14:38:38 -0600 [E] RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
2014-06-14 14:38:38 -0600 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
    NSFileCreationDate = "2014-05-28 19:39:15 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileHFSCreatorCode = 0;
    NSFileHFSTypeCode = 0;
    NSFileModificationDate = "2014-05-28 19:39:15 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 2541;
    NSFileReferenceCount = 1;
    NSFileSize = 13348;
    NSFileSystemFileNumber = 13501584;
    NSFileSystemNumber = 16777218;
    NSFileType = NSFileTypeRegular;
2014-06-14 14:38:38 -0600 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
    NSFileCreationDate = "2014-06-14 19:59:41 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileModificationDate = "2014-06-14 20:38:37 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 449;
    NSFileReferenceCount = 9;
    NSFileSize = 306;
    NSFileSystemFileNumber = 13500656;
    NSFileSystemNumber = 16777218;
    NSFileType = NSFileTypeDirectory;
2014-06-14 14:38:38 -0600 [E] IM: [install failed: 30]
2014-06-14 14:38:38 -0600 [E] IM: Install failed with error code: 30.
2014-06-14 14:38:38 -0600 [I] IM: ---------- log end ----------
Thank you very much for your attempts to trouble shoot this!

Flash Installer cannot download. "Adobe Flash Player could not be installed."

Flash Installer cannot download. Finally get the message, "Adobe Flash Player could not be installed." I already uninstalled the old copy, now I have no Flash Player.

My issue was identical.... days of frustrating downloads and initializing but no installation........ UNTIL I chose to not use the default installer and chose 'Save File'. Now I have the latest Flash installed in OS 10.8.5 no problems !!
This time a long download of 16MB arrived in the downloads folder that actually worked.
Prior to this, all downloads were around 1.6MB and there was no .dmg in the package.
I got my download under where it says "Still having problems?"
Hope this helps you.
See the attached page for reference.

/system/library/extensions/AppleUSBethernet host.kext not properly installed

Message on pro: /system/library/extensions/AppleUSBethernethost.kext not properly installed. What can I do?

Open the Script Editor in the /Applications/AppleScript/ folder, copy and paste the entire following line into it, and press the Run button:
do shell script "chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext" with administrator privileges
If it doesn’t work, choose Go to Folder from the Finder's Go menu, provide /System/Library/Extensions/ as the path, throw the AppleUSBEthernetHost.kext item away, and reinstall iTunes; if you’re running Mac OS X 10.7 or newer, get the installer from Apple’s iTunes site instead of the linked article.
(124159)

System not re-installing Microphoto player, stuck in install/fail lo

Similar Messages

Maybe you are looking for