System not recognizing device

I've tried the 5 R's with no results. Whenever I plug in the ipod nano of course the Do not Disconnect screen comes up. But then I get a screen taht states "your ipod has been connected. Please wait while the system recognizes the device. Waiting on ipod. This continues indefinitely. If I unplug the ipod, it states to reconnect device. Nothing seems to help. I've loaded it on several pcs with the same results. Also have loaded and reloaded ipod updater and itunes. itunes never sees the ipod. How can I fix this thing?

Put the device in DFU mode (google it) and restore as new.

Similar Messages

  • T60 system not recognizing drivers.

    I have a T60 laptop, model 2613-HKU. Recently I just reinstalled Windows XP. After the OS installation, I installed every drivers listed on Lenovo's website:
    http://www-307.ibm.com/pc/support/site.wss/MIGR-62928.html
    Still, under "Device Manager", I saw a list of uninstalled devices:
    -Biometric Coprocessor
    -Ethernet Controller
    -Network Controller
    -PCI Device
    -SM BUS Controller
    -Unknown Device
    -Video Controller (VGA Compatible)
    So I think in this case my issue would be likely to caused by the system not recognizing the drivers? Any help or suggestion would be really appreciated. I have posted a similar post before since I thought I only have an issue with the wireless system, so I apologize if anyone consider this somewhat a duplicate post.

    Just checkin: Lenovo driver installs have two steps: 1. Extract 2. Install. Did you do step 2?
    When you run the downloaded file it extracts, usually to a directory under C:/DRIVERS, then you go to that directory, and run the installer (usually setup.exe, but not always - check the installation instructions).
    I don't work for Lenovo. I'm a crazy volunteer!

  • Client Systems not recognizing updates

    Client Systems not recognizing updates that have been deployed. application and task sequencing work perfectly.  
    Circular references (0x8024000F) in meta data. Any help would be greatly appreciated. 

    A single line from a logfile taken out of context and without even knowing the name of the log does not help ... Please add details.
    Torsten Meringer | http://www.mssccmfaq.de

  • After unsuccessfully updating to Yosemite, back on Mavericks. But now my Timemachine or system not recognizing hard drive.

    After unsuccessfully updating to Yosemite, back on Mavericks. But now my Timemachine or system not recognizing the hard drive. Is there any way to manually locate or find the hard drive?

    Hi kruione,
    If you are having an issue with an external drive not being detected by your iMac, I would suggest resetting the computer's parameter RAM. See this article for how -
    OS X Mavericks: Reset your computer's PRAM - Apple
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?

    Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?
    I'm planning to purchase the 6 plus, but I need to know from where.whom will the fix for this problem emerge.

    My new iPhone 6 paired perfectly with my Mercedes system.  That said, on your iPhone 5, reset your network settings and then try to pair it again.

  • TOUCHSMART 520 PC NOT RECOGNIZING DEVICES IN THE USB PORT.

    When I plug any devices into the USB port, they are not recognized.  The computer acts as if they are not there.  The devices (MP3, camera, Garmin, etc) turn on, so I know that they are connected.  The Printer and wireless mouse that connect through the USB port still work and I have tried changing ports...it doesn't make any difference.  Even if I try to search for thr device, the computer does not find it.  Any ideas?

    Hi DJOBES,
    Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear about your USB issues. I will be happy to assist you but I need some additional information; what is your operating system and product number?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Software not recognizing device

    Software not recognizing devicezSince installing Windows 7, the Creative software such as Console lancher, Creative Control Panel, etc will not launch and returns an error message telling me that "The current selected device is not supported by the application. I have downloaded and installed the most current software/drivers for this product and operating system and have made sure that the card is properly installed. The device is recognized and present in the Device Manager and appears to be working properly.
    I am using a SB Extreme Audio card that was factory installed on aa Asus P6T Deluxe board. All worked well with the original Vista OS but after switching to Win7, the problems began. I have done a complete uninstall of the drivers and software as well as running "Driver sweeper" to root out any remaining elements before re-installing the software and drivers. I also have the .onboard SoundMax audio disabled through the CMOS.
    My system specs are as follows:
    Core i7 965 Extreme
    Asus P6T Deluxe
    2GB Corsair 600 Dominator
    EVGA 295-GTX
    000w Ultra PS
    Windows 7 Pro 64-bit

    I should have posted this some time ago. I was contacted by Eric Albers from Saris in mid-November with a PowerAgent update that fixes the problem.
    Here is the email I got from Eric:
    Thanks for your continued patience. As of today we have a version of PowerAgent that should resolve the issue for everybody without the need to boot into safe mode to download your data.
    Please download and install PowerAgent 7.5.8.47 from the link below. Be sure that you are not in safe mode when installing or using this version PowerAgent, also the installation steps have changed slightly so please be sure to follow them carefully.
    http://files.saris.com/software/components/PowerAgent_7.5.8.47.dmg

  • HT204406 Updated software. iTunes not recognizing devices.

    I recently updated my Mac with Mac OS Lion to get it to version 10.6. Now my iTunes is not recognizing any of my devices nor letting me purchase music in iTunes.  What am I missing? How do I get my devices recognized with this new software version?

    Welcome to the Apple Support Communities
    The latest iTunes version is 11.0.1. Open iTunes > About iTunes to check the version, and if you don't have this version, open  > Software Update to install the most recent version

  • Windows 7 not recognizing device - Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card

    Windows 7 is not recognizing my Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card (Qualcomm Gobi 2000).  I can't even uninstall the driver, it says that I don't have "sufficient permission" to stop device or something to that effect
    (though I'm an administrator).  I also can't re-install the same or different driver.  I might have installed the wrong driver, though this is supposed to be the correct one according to Dell after typing in my service tag.  I went to the FTP
    to get one specifically for "Verizon Wireless", but I can't uninstall the prior driver.
    How can I fix these issues?  Thanks.

    Hi,
    Any update?
    Have you tried safe mode mentioned in the first reply? What is the status of the driver in device manager? For "Verizon Wireless", have you installed any verizon software or related verizon device? Uninstall this kind software, then uninstll driver again
    as a test.
    Contact this support, maybe they can give some different ideas.
    Verizon Wireless Support
    http://www.verizonwireless.com/support/
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • Itunes is not recognizing device

    I have tried everything...I've udated the latest version of itunes, uninstalled itunes, and reinstalled. I've ulso updated all apps. HELP!

    Try here:
    iOS: Device not recognized in iTunes for Windows
    Did you do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Note this is ALL components, not just iTunes.

  • BIOS on Satellite L350 is not recognizing devices

    Hi
    I have a Satalite L350 which was crashing in windows after about 1 min of loading up. I thought perhaps the hard drive was faulty, so I tried to run a program I have called PC Check 6. I then discovered the cd drive would not read. I then tried a USB CD drive and still it would not boot up from disc. After resetting the BIOS to default settings I discovered that the BIOS was not recognizing any devices other than the hard disk. I took the hard disk out and tested with PC Check via another PC and HD Passed.
    I now want to reinstall windows but CD Drive wont boot. I asume the problem is with my BIOS (InsydeH20 version 1.5) Perhaps flashing it would work? But.... no CD and USB devices :S
    Any ideas what I can do please?

    Hi
    I dont think that BIOS is the problem.
    The BIOS has recognized the HDD properly. Right?
    Well, I think the internal CD/DVD drive is faulty if the BIOS cannot recognize this
    Furthermore the BIOS of the L350 does not support booting from USB CD/DVD drive.
    This is not possible
    If you want to install the OS from recovery disk, then you will need to replace the internal CD/DVD drive because it seems to be faulty
    Of course this is my personal option and just a suggestion

  • Computer suddenly not recognizing device

    My computer is not recognizing my iPhone 5 when I plug it in to transfer purchases and update.  I have had the phone for awhile and it was working just fine.

    Great! It's not the first thing you think of, but my philosophy is "when in doubt, reboot." What probably happened is the AppleMobileDeviceService crashed. This is the easiest way to restart it.

  • Headphone Jack Not Recognizing Devices

    Just stepped up from an old G4 iMac 17" to an slightly newer intel iMac 17" and I'm missing my old
    clear plastic "ball" speakers. There is a different type of jack on these than the 1/8" input on my new (older) iMac so I can't use them. The built in speakers just don't do it for me on this current machine.
    So to get to my point, I tried plugging a pair of powered speakers into the headphone jack and they were not recognized in the sound control panel. Tried with headphones and same thing. Only "internal speakers" appears in the control panel. I asked someone at an Apple store about this and he told me to look for a red light inside the headphone jack. If I saw red then this most likely would mean the jack is fried. I checked and did NOT see any red light.
    Any suggestions ?
    Thanks in advance !

    Hi moJo
    Sounds like a hardware problem with the Output jack, the sound card or that section of the logic board.
    If you are stuck with that iMac for whatever reason, then your best bet might be to pick up a Griffin USB Audio Interface. > http://www.griffintechnology.com/products/imic/
    Dennis

  • TS3230 from a macbook air, osx 10.7.5, am trying to enter OPM/e-qip application but told system not recognized, to go to tools, options, advanced, encryption, enable ssl3.0 and tis 1.o.  How do I get to "Tools"?

    I am trying to enter OPM/E-QIP Application but am told browser is not recognized, to go to: tools, options, advanced, encrytion, enable, SSL3.0 and TLS 1.0.  How to get to Tools?

    Here's what OPM says to do to configure Safari, if that's the browser you're using (sort of; their instructions wouldn't get you where you need to be with Safari 5.1.7:
    1) Select Safari, then Preferences from the menubar.
    2) Click Advanced
    3) Click the check box next to "Show Develop Menu in the Menu Bar"
    4) Close the Preferences window
    5) Select Develop from the menubar
    6) Select User Agent, then "an appropriate browser" (OPM's words); they suggest Firefox for the Mac
    This information came from their Quick Reference Guide (other than correcting an error about how to set the user agent), and I haven't tested it.  If this doesn't work, you probably need to ask OPM (or their contractor) how to use the site with a Mac ...
    Good luck
    srb

  • FireWire not recognizing device

    I am running 10.5.8 on MacBook Pro. I was successfully using my camcorder and DV cable and everything worked fine. Suddenly my camcorder was no longer recognized (I am not sure if this correlated with a change in firmware or not.) When I go to "Network" the status shows the FireWire is not connected. The camcorder flashes DV-IN, so it seems like the problem is on the computer side. Please Help!!!! Thank you in advance.

    Hi,
    Do you have any other firewire devices that you can connect to your computer. Try connecting the device with the same cable and see if it is recognised in system profiler, if it does it is the fault is probably on the camera.
    Also before you try that, connect your camera, switch it on in VCR mode and then launch i movie.
    Good Luck.
    DM

Maybe you are looking for