System not seen in SMD inspite of being present in SMSY

Hi all,
We have upgraded a system 2 months back.While setting the SMD for the managing system ,found that the landscape management (in SMD) is not updated with the right version of the system,so deleted it from there.
Further continued to Diagnostics setup-managed systems-setup wizard; but here i didnt find my system for which the SMD should be set up.I have installed the SMD agents they are up and running.
Also checked the system in SMSY,found that there is discrepancy with the system in " LOGICAL COMPONENTS" and corrected the right version there.
I ran the SMD wizard for the managing system i.e SMD upgrade ,also ran the upgrader expecting that the SMD will pull the system data from SMSY,but nothing of sought has happened.
Note 1113137 - Outdated Solution in Solution Manager Diagnostics ,isnt relevant to my case.
Also i understand that using tcode SMDIAG_WIZARD isnt relevant for my case ,we have solman 7.0 sp stack level 17.
Could any one please let me know how can i have the system in SMD
i.e. how to restart the soltuion setup and relaod the landscape.
Regards,
Sunanda

Hi,
Please find below the logs which i got from
Diagnostics Administration-Manged system- Agent administration -Agnet log viewer
Agent: <no server na,e> xxxxxxx.xxx.com
Log Location:SMDAgentApplication.0.log
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[SMDAgentAppLog]/>
<!PATTERN[SMDAgentApplication.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%t] %10s %m)]/>
<!ENCODING[ISO8859_1]/>
<!FILESET[0, 10, 1000000]/>
<!PREVIOUSFILE[SMDAgentApplication.9.log]/>
<!NEXTFILE[SMDAgentApplication.1.log]/>
<!LOGHEADER[END]/>
Jan 8, 2009 10:15:44 AM [Thread[Thread-6,5,main]] Warning CAPatchInstaller_78317831: Patching Component Analyzer [/usr/sap/SMD/J91/component_analyzer] with [/usr/sap/SMD/J91/SMDAgent/applications/com.sap.smd.agent.application.datacollector_7.0017.20081029140742.0000/patch/CA_7.00.17.2.20081029142003.patch.zip]
Similarly i have logs for the other two virtaula servers too.
Please note that only the SMD agents have been installed and the SMD setz wizardisnt yet performed ,as the system is missing form the list .
Kindly advise
Thanks and Regards,
Sunanda

Similar Messages

Business system not seen

Hi all,
I am working on a JDBC-XI-Idoc scenario.
I have created a business system and a technical system. I have also completed all my design in the repository.
When i try to create a new object in the Directory, it is asking for the business system. But the business system which i had created in the SLD is not seen in the list of business systems which is getting displayed.
Can anybody help me in this?
Thanks in advance,
Divija.

Hi,
you need to assign the business system first
1. you can do it in the directory - open business systems without party and right click and <b>assign business system</b>
2.if you won't see your business system there
refresh sld first (from the manu in directory)
and repeat the step 1.
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

HotNews Inbox - system not seen

Hello,
There is no system visible in HotNews Inbox, but for support package stack the system is visible for that solution. For other solutions systems in HotNews Inbox are visible.
Any hints please.
Solution Manager 4.0 and SPS09.
best regards,
Michal

Hi,
Please find below the logs which i got from
Diagnostics Administration-Manged system- Agent administration -Agnet log viewer
Agent: <no server na,e> xxxxxxx.xxx.com
Log Location:SMDAgentApplication.0.log
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[SMDAgentAppLog]/>
<!PATTERN[SMDAgentApplication.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%t] %10s %m)]/>
<!ENCODING[ISO8859_1]/>
<!FILESET[0, 10, 1000000]/>
<!PREVIOUSFILE[SMDAgentApplication.9.log]/>
<!NEXTFILE[SMDAgentApplication.1.log]/>
<!LOGHEADER[END]/>
Jan 8, 2009 10:15:44 AM [Thread[Thread-6,5,main]] Warning CAPatchInstaller_78317831: Patching Component Analyzer [/usr/sap/SMD/J91/component_analyzer] with [/usr/sap/SMD/J91/SMDAgent/applications/com.sap.smd.agent.application.datacollector_7.0017.20081029140742.0000/patch/CA_7.00.17.2.20081029142003.patch.zip]
Similarly i have logs for the other two virtaula servers too.
Please note that only the SMD agents have been installed and the SMD setz wizardisnt yet performed ,as the system is missing form the list .
Kindly advise
Thanks and Regards,
Sunanda

Logical system not seen in ID (7.0)

Dear XI experts,
i defined in SLD a logical system as application system (SAP BACKEND)to send and receive IDOCS.
I am trying to assign a Business system in the ID which I defined in the SLD and cant seem to find this in the ID.
What must have I missed while defining the Business system or Technical sysetm?
Perhaps some step information could help for PI 7.0.
Thanks

hi,
have a look at my blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

Mac OS X 10.9.2 was released today for this issue and others. Earlier versions are not affected.
See this Apple article - http://support.apple.com/kb/HT6114
You can use the Mac app store to do the update or download it directly from here - http://support.apple.com/kb/DL1725
Best of luck.

Windows Operating System not being monitored

I have installed some of the management packs (advanced workflow module events, event log provider events, performance monitor porvider events, registry provider events, script and powershell provider events, service monitoring events, vmi provider events) and
there are no overrides. I still cannot get the windows operating system to get monitored. I have restarted the server and still none of the windows operating systems are being monitored. Is there a certian management pack that i need to install
for the monitoring Windows Operating Systems.

dktoa is correct, just because you have the Agents installed does not mean that anything is actually being monitored. In fact, all that will be monitored is the Agent itself being able to communicate with the Management Server.
However, I would suggest to ensure that all of your Agents are reporting back as Healthy (aka green), before you import any Management Packs. That way any issues that may occur can be directly linked (and thus troubleshooted) to the MP.
Additionally, you have not mentioned what Windows OS you are trying to monitor. More than likely it is a Server OS; in which DKTOA has provided the link for the Windows Server Operating System Management Pack.
However, if in case it is a client-based Windows OS (i.e. XP, Vista, 7) than that Management Pack can be found here: http://www.microsoft.com/en-us/download/details.aspx?id=15700.
You should note, that there currently is no Management Pack for Windows 8; though it is due out soon.

The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber,

Hello Everyone,
Suddnly stop merge replication. transaction cannot replicated from publiser to sunscriber.
I tried to set heartbeat_interval= 5 but still not working..
The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor
are still active.
What is the problem with merge replication and why this erroe comes..
any solution of this error or reconfigure merge replication?
please give me a solution

Run profiler on the subscriber to see what the merge agent is doing there. It is possible that there is some blocking that is causing the agent to hang. You might want to set the heartbeat to 10 or higher. The default is IIRC 5.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

Blackberry Passport:
After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
With original OS 10.3 could connect USB key to transfer my photos with file manager.
Any suggestions?

There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
- Ira

Text seen in swf file but not seen in flash pro. publish

I am using fmath formula component for flash. when i push ctrl+enter, texts in formula object are not seen, there is only tiny squareroot symbol. however, when i open created swf file, everything seems normal. I use flash player version 11.2. . Also, everything is ok in version 9.
http://www.fmath.info/flash/download.jsp

Are you setting the font that is being used to display the formula yourself? If so is it properly embedded and issued to the component properly? A quick way to check is to use a known system front (Arial, _sans, etc) and see if text shows up. If it does you're just not either embedding properly or aren't pointing to the font correctly in the component.

Ipod not seen by windows or itunes

Hello, I'm totally frustrated and have been searching for hours. Please someone help.
- Nano 8 gb
- Windows xp
Neither Windows (my computer) nor Itunes sees my ipod. Ipod is working fine: did the menu/select thing, cable is good.
When I plug the ipod in the usb port I hear a bleep and I get a message bottom right "new hardware found ipod"and the icon is a usb cable. Ipod is not in My computer window. Ipod is not seen by Itunes
Tried Device Manager/I see Ipod with a ? Yellow. If i right click on it and do update driver the ms computer management system crashes and sends error report.
I tried dowloading the USB driver and placing it in the directory, but I got stuck because there is no windows/inf directory. I tried to update the usb driver with the same ms crash.
I'm completely frustrated, please can someone help me.

I was having the same problem the other day. I'm not sure what it was but I think it has something to do with the i tunes and i pod 1.2 update.
What I did was:
1. Uninstall i tunes
2. Restart my computer
3. pluged my ipod in a slow usb line
4. waited until my pc recognized it in there. It took a little while.
5. re installed i tunes from apple.com
6. waited until i tunes recognized my ipod
7. updated my i pod with my library it took a long time because i was in the slow usb plug.
8. re plugged my ipod into a 2.0 usb line
9. i tunes recognized it.
10. I then updated my ipod to the new 1.2 version
11. The problem started happening again
12 I repeated what I did before and now it is working.
It was very frustrating! I hope it works for you.1

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

My iphone4 is not seen on itunes. When I plug the iphone the device does not recognize it but the pc recognizes it as a camera or something. What can I do?

My Iphone is not seen on itunes when I plug it. I've tried everything that I found on the internet. but it still doesn't work, so I can't sync my iphone. What can I do? I have checked all the USB ports, I have desinstalled and installed again itunes, and I have run out of ideas.

When you plug it it, it should recognize it as an Apple IPHONE under devices. It will then bring the Camera/Connection wizard for the photos on the device. When you plug into different USB, it should bring the hardware wizard and tell you what its installing, what happens?
Under Device Manager, under Imaging Devices it will show up as Apple IPHONE. Is this being shown in your computer?

While updating my iphone, I am receiving a notice that itunes is not available. Is system not avaialbe and should I just try later?

while updating my iphone, i recevied a message that iTunes was not availabel and to try later. Is the system not available or is there something wrong with my computer

Hey csumner1,
Thanks for the question. I understand you are receiving a "Not enough free space" alert when attempting to sync your new iPhone 4s. The following article may help to resolve your issue:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
1. Turn off the music or photo sync option in iTunes for the device.
2. Click Apply to sync the changes to the device.
3. Turn the music and photo sync options for the device on again.
4. Click Apply again to try to sync the device to iTunes.
          - If the 'Not enough free space' alert appears, continue to step 5.
5. Turn off the automatic syncing functions for the iOS device. To do this:
          - Select the iOS device from the iTunes window and click the Summary tab.
          - Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
          - Click Apply to sync the changes to the device.
          - Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
6. Restore using iTunes.
Thanks,
Matt M.

Ipod touch not seen in sauce menu of itunes

Ipod touch not seen in sauce menu of itunes, I have turned off & on the Ipod and re-downloaded a fresh ITunes software & used a different usb port & restarted the pc but still it is not seeing the IPod Touch. I also got this message when downloading a fresh ITunes software "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services"

See here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
Also maybe here:
iPhone - not enough access privileges: Apple Support Communities

Satellite A - DVD drive not seen by Windows Explorer

THe DVD deive on D is not seen by windows explorer. It used to work but has now disappeared. The dvd hardwars starts up at boot then ceases.
Any ideas anyone?

Try removing the CD/DVD Filters from the Registry.
When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
1) Run Regedit (Start -> Run -> Regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
4) Reboot.
If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
This utility can remove the filters for you:
http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

System not seen in SMD inspite of being present in SMSY

Similar Messages

Maybe you are looking for