System object create problem in EP 7.3 Version.

Hi Exports,
i was created system object in sap ep 7.3 but i got some error please give me solutions...........
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Thanks
Reddy

Hi,
System Object is a set of connection properties to represent an external or SAP systems (SAP R3, /CRM/BW) used to retrieve data into portal iViews. We can create a System Object in any one of the three ways
The system object can be created from either of the following:
u2022Based on System Template (Template)
u2022Based on Portal Content      (PAR)
u2022Coping Existing Systems     (System)
The Required Steps to Create a System Object in the portal are as :
1.          System Alias settings
2.        Connector settings
3.        ITS settings
4.        WAS settings
5.    User Management Settings
This may help
http://wiki.sdn.sap.com/wiki/display/EP/HowtoCreateSystemObjectinthePortalforConnectingtoSAPbackend+System
https://wiki.sdn.sap.com/wiki/display/EP/User+Management
Forum links:
SSO problem for system
Regards,
Jyothi.
Edited by: Venkata Naga Jyothi on Dec 14, 2011 9:58 AM
Edited by: Venkata Naga Jyothi on Dec 14, 2011 10:04 AM

Similar Messages

Lenovo System Update creating problems in fresh installation of Win 7

I'm hoping I can get help from this forum...
I have a Thinkpad R61 7742-CTO that has its original XP Pro operating system in day-to-day use. It's time to finally update to Win 7 with XP due to sunset soon. (Although I think Win 7 is visually ugly compared to XP)
I removed my "production" XP disk drive and did a clean installation of Win 7 Pro on the original purchase ("test") disk, including the 140-some MS updates available as of yesterday. Everything runs fine, including using Windows Update to search for new important and optional updates. So far, so good. I next went to Lenovo's website and downloaded the current version of Lenovo's System Update. Again, no problems once that particular program was installed. I installed Lenovo optional updates also without encountering problems.
However, when I load the Lenovo important updates, which include Access Manager, Power Mgr, etc., various intel and other "enhancements", things go wrong. If I click on Windows Update, for example, I get a message that it is not running. If I then do the net start/net stop wuauserv routines I found when searching the exact error message, I get the error: System error 5 access denied. I get the same message for several similar admin routines, particularly those involving "net".
I have tried many of the supposed repairs, including MS Fix-Its, that appear in Google when I searched the error message. None has worked. (A couple Fixits I did manually and got the Access Denied messages again) So I've rolled back using the restore point just prior to downloading the Lenovo programs, and everthing resumes working as expected.
It seems that the Lenovo downloads are interfering with something, particularly my admin rights, in some way. There's only one user (me) and it has admin rights, no password & etc. Other odd things are Access Connections is running as is the basic Win 7 network app in the system tray. Perhaps the Lenovo apps are interfering with the similar Win apps rather than replacing them as intended?
Can anyone suggest an approach to solving my problem?
Thanks,
Greg

Hello and welcome,
It may be that TVSU is "updating" the AHCI driver (Intel Matrix Storage Manager or Rapid Storage Technology) to one that breaks Windows update.
You can try rolling back the driver to an earlier version or going to the Intel site and getting a later one.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-blocks-Windows-Upda...
Z,
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem Create System Object in the Portal for connecting CRM abap

Hi, i creating system in the portal (JCX) for connecting system ABAP CRM (CRX), after create system try run test connection and show messages error:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
In the logs the portal (NWA) show messages:
Failed in creating the JCO Connection.
The logs operation system (log Security_audit.log)
Error> occured >Thu Jun 23 11:34:41,278<RfcException: message: 'mshost' missing Return code: RFC_INVALID_PARAMETER(19 Return code: RFC_INVALID_PARAMETER(19)    error group: 101 key: FC_ERROR_PROGRAM
     at com.sap.mw.rfc.api.RfcOptions.checkParameters(RfcOptions.java:438)
     at com.sap.mw.rfc.api.RfcApi.RfcOpen(RfcApi.java:688)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1079)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3256)
Plase help, any idea?

message: 'mshost' missing Return
During the System Object Creating in System Landscape, there is any entry as Message Server Host: CRM MS HOST
and Message Server Port : sapmsSID and add this entry in etc/services --> bottom samsSID 36NN/tcp where NN is instance number.
Try this and let me know.
Thanks
SM

Query on system object

hi everyone ,
i have a query regarding this system object. I have created a system object and assigned it to a user to log on to sap R/3 .its working fine.now my question is i have another user on the R/3 side .now i want to log on to the R/3 from the portal using this second user can i use the same system object created for the first user or should i create a new system object."can a system object be assigned to 2 or more users?"
Thanks in advance,
regards,
Tilak

hi Arun ,
thanks for ur reply,well i have done the user mapping in the same way as u told.but my doubt is like for suppose i have a user named p1 on my portal side & two users named r1 & r2 on the R/3 side .now i have created a system object named sys1 and assigned it to p1 specifying
username:r1
pwd:*******
in the user mapping.
now i want want the same p1 to connect from the portal to R/3 using
username:r2
pwd:*******
now can i use the same system object or should i create another system object.
regards,
tilak.

Problem :" No changes allowed to SAP system objects" ,pls...

Hi guys, I recently installed the minisap system successfully but after I log on to the system every time I want to create a new program ( SE80 ), change and edit old program then the systems responds " No changes allowed to SAP system objects".
Have anyone had the same problem.
I would be very grateful if any one could help me.Pls..
Note:Mini SAP i get from Books ( ABAP Objects: Introduction to Programming SAP Applications
by Horst Keller, Sascha Kruger )
Regards
Indra Budiman
[email protected]

Hi Indra,
On the face of it, it seems you're trying to change the standard SAP objects (programs). Could you specify which program you're trying to change / add ?
Remember, all your new programs should begin with either a 'Z' or 'Y'.
Regards,
Anand Mandalika.

Error while creating a system object for R3 in portal

Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AM

I created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj

How to create a system object in portal that points to a web dispatcher

Hi,
How do we create a system object in the portal for a web dispatcher? The web dispatcher in turn points to an ECC system. The path for communication is EP>Web Dispatcher>ECC
Regards,
Sridevi

Hi,
Connection test for the following succeeded:
1. SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mtw02spwp02:80)
5. The host name mtw02spwp02 was resolved successfully.
6. The Web AS ping service http://mtw02spwp02:80/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/bsp/sap was obtained successfully.
2. ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (mtw02spwp02:80)
6. The host name mtw02spwp02 was resolved successfully.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/gui/sap/its/webgui was obtained successfully.
Next test for SSO failed:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards,
Sridevi

Creating callable object+ authorization problem

Hi,
I am following the tutorial to create the first process (GP). I assigned all designtime specific roles. I can now create a content package object. But when I try to create the callable object, I come across the following error:
You are not authorized to start the design time
What going wrong! A quick reply will be appreciated!
Mayukh

I restarted the server. But the problem persists.
Let me give more details:
It says :
YOU CAN
and then the following list
Create Action #
Create Callable Object #
Create Process #
Create Object View
Create Block #
Create Content Package Object
Create Simple Process
Create Process by Semantics
The problem is with the ones I marked as # and for the others it works fine.
I assigned the role : designtime_all and all other roles where the term designtime occurs.
Namely:
UME com.sap.caf.eu.gp designtime.businessobject
UME com.sap.caf.eu.gp designtime.admin
UME com.sap.caf.eu.gp designtime.process
UME com.sap.caf.eu.gp designtime.callableobject
UME com.sap.caf.eu.gp designtime.logicalcriteria
UME com.sap.caf.eu.gp designtime.businessobject
UME com.sap.caf.eu.gp designtime.admin
UME com.sap.caf.eu.gp designtime.process
UME com.sap.caf.eu.gp designtime.callableobject
UME com.sap.caf.eu.gp designtime.logicalcriteria
UME com.sap.caf.eu.gp designtime.translation
UME com.sap.caf.eu.gp designtime.cpkgobject
UME com.sap.caf.eu.gp designtime.ertemplate
UME com.sap.caf.eu.gp designtime.all
UME sap.com_tclmwebadmin~permissions Applications_Start_Stop
Phew!
Mayukh

Problem in System object - Very urgent - Pls help

Hi ,
I have installed Portal version SP9 on windows with MS SQL server as database . I am experencing some
issues during the system object creation for R3 . Below I will specify all the configuration I have done for
system object creation ,
1. I have selected the option Dedicated application server for R/3 system .
2. Under th eproperty category , I have selected Connector and put the following values .
Application Host - 128.1.7.2
Remote Host Type - Select -3
SAP Client - 120
SAP System ID (SID)- DV1
SAP System Number - 00
System Type - SAP_R3
Trace Mode - Select -01
3 . Then Under the property category , Web Application server ( WAS ) I have selected
the following properties .
WAS hostname - 128.1.7.2
Was Protocol - http
4 . Next step I have selected the User Management and put the below details
Logon Method - UIDPW
usermapping type - admin ,user
4. I have also created an alias and made it default
6. Then I have gone to usermapping under the user administration and created the
user mapping for the user .
But when I have tested the system object , I am getting the following error .
SAP Web AS Connection - Jan 1, 1970 8:17:25 AM
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname (128.1.7.2)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined.
ITS Connection - Jan 1, 1970 8:17:25 AM
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.ITS.path; wap.ITS.protocol; wap.ITS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are not valid: wap.ITS.path () ; wap.ITS.protocol () ; wap.ITS.hostname ()
I really dont know what is foing wrong . Do I need to omit the WAS details which I have mentioned in the step number 3 . What is the
real use of this step ? Could any body guide me as this is quite urgent
Thanks
Aneez

Hi,
We have similar setup and having same userids in both R/3 (webas 6.40 based) as well as
in EP 6.0, so we are not doing any user mapping as recommended. I hope i gave all necessary
parameters under system object of categories user management with SAPLOGON, connector
properties and also WAS properties with hostname and type as http. When i try to do test
connection it is giving following error message:
SAP Web AS Connection -
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname (xxxxxxxx)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are
correctly defined.
Test Connection with Connector - Jan 1, 1970 6:40:19 PM
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection successful
Also when i try to do the testing of transaction from :
System Adm.>Support.>SAP Application>SAP transaction>
Select the system and Tcode and most important SAP GUI type = SAP GUI for Windows
i am getting connection broken error.
Let me know is there anything in specific which is missing.
Thanks

Do we need to create or actiovate any system objects for ess mss applicatio

Hi
I am new to ESS MSS business packages.i know we need to activate 5 pairs of JCO destinations,
do we need to create or activate any system objects ,because ess mss applications contains transactional iviews also
how they will communicate.

once you placed the portal content, the default system objetcs for ESS and MSS are delivered by SAP only, we need to configure the same like JCO destinations.,

SRM system object within Portal: WAS settings with Webdispatcher

Hello Portal experts,
we have SAP EHP4 ERP system (only ABAP stack).
In order to use some SRM functionality we installed SAP EP (EHP1) and creates a appropriate system object within portal.
We use a Webdispatcher, so we have to replace within WAS area the local address by the address of Webdispatcher and appropriated port (webserver:567).
The tests of this system object looks as follows:
The address of http://webserver:567 can be retrieved
The problem are the results of following tests:
http://webserver:567/sap/bc/ping
http://webserver:567/sap/bc/webdynpro
These errors occured because the both pathes /sap/bc/ping and /sap/bc/webdynpro do not exist on Portal/Java engine.
Questions:
How can we connect ABAP backend to Portal with extra Webdispatcher?
What are the setting within WAS area?
kind regards

Hi Thom,
Is your webdispatcher in front of your portal? or in front of the ICM of your Backend System?
If the applications that you want to enable via your EP are of the type: WD for ABAP, BSP, IAC or ITS then you should also have a webdispatcher in front of your Backend System (in addition to on in front of your portal).
Please check the following link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/9a9a6b48c673e8e10000000a42189b/frameset.htm
On this page, scroll down to the last example. Although the image is there to explain "High Availability of the SAP Web Dispatcher" it gives you a good view on the request respond steps.
One rule of thumb is that the EP system itself doesn't act as a reverse-proxy. In other words, if an iView points to a WD 4 ABAP application on the Backend then the actual WD4ABAP application is rendered in an iFrame.
From a technical/connection point of view the client (browser) has 2 connections, one to the EP and 1 tot the Backend.
Allot of people do not realize this when they start there project...
Cheers, hope this helps you a bit....
B

Insert Object (create from pdf file) in wordpad fails

Problem:
I am unable to insert object (create from existing pdf file) in wordpad application.
Environment:
OS: Windows 7 Professional + SP1 (64-bit)
Acrobat X (32-bit installer)
Procedure:
Open Wordpad application, click on 'Insert Object', choose 'Create from File', Browse and Select exsting pdf file, click 'Display As Icon' and Click 'Ok'
Expexted Result:
PDF should get inserted as OLE object to wordpad
Actual Result:
Error message "Failed to create object. Make sure the application is entered in the system registry."
Addition Notes:
I noticed that while insterting PDF (OLE object) it seach for certain registry key (AutoConvertTo) which is not available hence it fails.

Yes, I am aware. But this problem appears only when I insert PDF file (which is Adobe file).
I guess this has nothing to do specifically with 'wordpad' but I referenced known application from standard offiering. It happens with any 64-bit application using 'rich-edit' control (this is Microsoft too ) and allowing user to insert OLE objects.
I guess somewhere Adobe Acrobat installation fails to create required registry entries which are being referred by 64-bit applications while inserting PDF files as OLE objects.

Transport system objects i.e. contents of table t100 from one system to ano

hello all,
how do i transport contents of table t100 from one system to another...
tried creating a transport request... but when i got an error when used r3tr tabu t100... i got a pop up saying
"System objects cannot be transported directly"
know abt restore... any other way of doing it...
Regards, Jatin

Hello all,
Thanks for the support so far...
to clarify the problem in more detail...
when i add R3TR TABU T100... and hit enter... i get the error message at the bottom of the screen...
" System objects cannot be transported directly (e.g. T100, TRDIR, TFDIR..) "
When i double click the error message, i get a pop up, detailing the "KINDS" of tables which cannot be
transported. (like in my case is t100)...
The only help which i get at the bottom of the popup is...
"Direct transport of these table entries is only allowed for special tools, such as the client copy program."
Any other way of doin it...
Regards, Jatin

Could not retrieve System Object for the alias.

Hi all,
I have installed a business package (Maintenance Technician) and created system SAP_PM with aliases SAP_ECC_Manufacturing, and SAP_ECC_Common. When I am logged into portal using Super Admin role, all the iviews of business package are working fine. But when I am logged in using normal user, all iviews in the business packages are throwing the following exception. Any ideas why? I appreciate your input.
<b>Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_ECC_Manufacturing', System ID: 'pcd:portal_content/com.xyz.fl_systems/com.xyz.SAP_PM'. User: 'abcuser',
Reason: Access denied (Object(s): portal_content/com.xyz.fl_systems/com.xyz.SAP_PM).</b>
Thanks
Vicky R.

Hi Vicky,
can u pls share ur experience how did u solve this problem, i too facing the same problem.
what i did created one user who is already existed in BI System and created few iviews related to BI Reports.
when i logged in through that user id in portal , while executing system is throughing the error what u have faced.
Could u please let me know how did u solve that problem.
Thanks in Advance
RamanaRao V

How to use session cookie property of System object?

Hi all,
I have searched all over the SDN but didnt get anything relevent so here i am posting my query...
My scenario is as follows:
I have created a KM document iview that launches an HTML page, on click of button of HTML page a VC iview is launched. On this iview i have a button that hits BI query.
PS: A system object is created for the connectivity bet portal and backend BI server.
PS: i have configured SSO between portal and backend.
Now when i click on button on iview that fetches the data from backend, i am asked for authentication pop-up, although i have configured SSO why i am asked to enter UID and PWD again??
In system object there is a property named
<b>"session cookie = MYSAPSSO2"</b>
So should i use this property so that cookie will get transfered from one session to other session when i click button on iview??
If yes then HOW??
Is there any other setting remained in Visual Admin?? or Backend or portal?
What could be the missing??
PS: User id are same on portal & backend.
Any help will be highly appreciated...
Regards,
Ameya
Thanks in advance
Message was edited by:
Ameya Pimpalgaonkar
null
Message was edited by:
Ameya Pimpalgaonkar

Hi Ameya,
I do not know the exact answer.However you should look for something called JSESSION ID.
Have a look at the thread:
Re: Problems Using Application Integrator for BSP Application
Reg SSO Logon Tickets and Browser sessions
How to use jsessionid while making HTTP calls??
Hope you find something which can help you.
Regards
Atul Shrivastava

System object create problem in EP 7.3 Version.

Similar Messages

Maybe you are looking for