System object for BI 7.0

Hi ALL,
When creating Iview using BW webtemplate in portal 7.0 using BI 7.0.It is not prompting to select the system .. where as for 3.5 it will propmt to select system ... for BI 7.0 where exatcly we specify the system .

u can give system id in iview properties System

Similar Messages

Could not retrieve System Object for the alias.

Hi all,
I have installed a business package (Maintenance Technician) and created system SAP_PM with aliases SAP_ECC_Manufacturing, and SAP_ECC_Common. When I am logged into portal using Super Admin role, all the iviews of business package are working fine. But when I am logged in using normal user, all iviews in the business packages are throwing the following exception. Any ideas why? I appreciate your input.
<b>Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_ECC_Manufacturing', System ID: 'pcd:portal_content/com.xyz.fl_systems/com.xyz.SAP_PM'. User: 'abcuser',
Reason: Access denied (Object(s): portal_content/com.xyz.fl_systems/com.xyz.SAP_PM).</b>
Thanks
Vicky R.

Hi Vicky,
can u pls share ur experience how did u solve this problem, i too facing the same problem.
what i did created one user who is already existed in BI System and created few iviews related to BI Reports.
when i logged in through that user id in portal , while executing system is throughing the error what u have faced.
Could u please let me know how did u solve that problem.
Thanks in Advance
RamanaRao V

System Object For BI In Visual Composer

Dear portal Gurus,
I have some rfc's in BI server and i want them to access in Visual Composer,so i created a R3 dedicated server system object for that BI server but when i'm entering that value of the RFC it is unable to access ,so is that we should create a load balancing system object for that BI server,
Plz Help me
Thanks and Regards,
sathya.

are you able to see your rfc in the drop down list in the models section?
Also do check in your portal system object if SAP System type is SAP_BW.
Hope this helped you.

Error while creating a system object for R3 in portal

Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AM

I created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj

Creation of system object for customized workflow

Hi Experts,
I am required to define a System Object with system alias, for creation of UWL to trigger Customized work flow's.
What WAS properties and Connection Properties and ITS Properties i should maintain in newly created System Object?
how do create UWL so that it triggers Customized workflow instead of standard workflow in R/3?
I have similarly total 3 Customized workflow so do i need to create three UWL's for each one?
Please help me out!
Regards,
Siva

Hi Shabir,
I am new to EP can you please let me know how to create custom connector? that triggers three custom developed workflow?
and Please let me know what parameters to pass to create system object(like WAS Properties, ITS Properties etc)
Thanks in advance!
Regards,
Siva

Do we need to create or actiovate any system objects for ess mss applicatio

Hi
I am new to ESS MSS business packages.i know we need to activate 5 pairs of JCO destinations,
do we need to create or activate any system objects ,because ess mss applications contains transactional iviews also
how they will communicate.

once you placed the portal content, the default system objetcs for ESS and MSS are delivered by SAP only, we need to configure the same like JCO destinations.,

System object with same credentials for all users?

Hi everyone
I would like to create a system object in Portal, which can be used by users in a specific group. However, I want all users to use the same credentials for this system. Is this possible?
I've tried creating systems, but they all seem to require user mapping to work correctly. Is there some way I can create a system object with the credentials as part of the object, and then just assign permissions to it as required?
Please let me know if this raises any questions.
Thanks
Stuart

i dont think it is possible to create a system object for all the users with same credentials.anyways you are trying to create system object for some users who belong to a particular group.so you need to do only one time user mapping for that group
go to user administration-search for the group-go to user mapping tab-give username and password..
reward points if helpful

Unable to retrieve system object

An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.salesrepresentative/com.sap.pct.crm.sal.sales/com.sap.pct.crm.ord.orders
Component Name : com.sap.portal.appintegrator.sap.BSP
Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_CRM', System ID: 'pcd:portal_content/PCR_CRM-IDES'. User: 'SALESREPS', Reason: Access denied (Object(s): portal_content/PCR_CRM-IDES).
Exception id: 10:50_24/06/07_0034_4060050
See the details for the exception ID in the log file
any hope for solving this ERROR

Hi rahul,
1) check your permission setting as mentioned above and with read/write for "Everyone"
2) In the same screen, next to "Everyone", there is a checkbox. Make sure that you have the "Enduser" flag
Those are the 2 settings you have to make sure that is done in order to process iviews connected to your backend (system alias) systems.
Hope that help.

Ho to change the mapped System object to the Model to another System object

Hi All,
Initially i have created one system object (TestSystemForVC) for testing the VC application. Then i have started completing the whole development in that perticular model object. many data soruce objects are added to the model using the TestSystemForVC system object.
Now i have created one more system object pointing to Otherclient. in R3. How make use of the same model pointing this new System object for working properly with out doing the complete development of that model.
I just want to map the existing model to new system object. Can any body tell me how to achieve this.
Regards
Vijay

Hi Vijay,
therefore you can use the Alias Manager (see attachment). There you can replace all other system aliases.
Best Regards,
Marcel

SAP_J2EE_ADMIN, no systems available for user mapping

Hello,
We are using EP 7.0 to run CRM applications (client 100).
We are creating portal users in 001 client of CRM server.
When I try to map users of portal to users of crm through user administration, it says that, "There are no systems available for user mapping for the selected principal".
I discovered that this warning disappears if I give the user has SAP_J2EE_ADMIN role in 001 client. But this time the user has the content adminstrator, user administrator and system administrator tabs as well. I don't want to give administrator rights to everyone.
What can I do?
Any recommendations?

I maintained the permissions like Administrator:None, End User:X, Role Assigner:X.
I removed the J2EE_ADMIN role from the user.
But unfortunately the result did not change. The user can not access the CRM system.
Here is the error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.crm_user/com.sap.pct.crm.ckm.home/com.sap.pct.crm.ckm.work/com.sap.pct.crm.act.activities
Component Name : com.sap.portal.appintegrator.sap.BSP
Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_CRM', System ID: 'pcd:portal_content/j2eeadmin/systems/com.arr.SAP_CRM'. User: 'ILKNURY', Reason: Access denied (Object(s): portal_content/j2eeadmin/systems/com.arr.SAP_CRM).
Exception id: 04:32_24/04/07_0038_5660850
See the details for the exception ID in the log file

Where is A good Systems Objects Scheme Diagram???

I would love to find a UML diagram for a base install of all system objects for Oracle Enterprise (NOT That "Free" CA thing that they want a blood type for). That other product (MS) gives you a pretty glossy poster of the system objects. I would like to download it and print it out on a plotter. Any sources?
Thanks
A

If u check the return value for null before using it, i see no reason why u can't send null (after all, sending nothing is a lot better than sending something - saves the ops for pushing the data into the stack and popping it out of it!). Anyway, checking for null is so much more elegant
if(obj1 == null)
//return error
else
return obj1;rather than having to get the value from the object and manipulating it!

Issues while JDBC System Object Creation for accessing MS SQL 2000 Server

Dear Experts,
I am creating system object to connect to MS 2000 server in Ep 7.3
1) created system with all the properties
2) User mapping done
3) permissions ok
but still while testing connection its giving error
"No connection to system DBSQL found:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not create JCO connection.
'user' missing"
""" Connection Test for Connectors:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct. """"

Dear Mr. Arun,
thanks for the valuable sap note
I have applied the note but same result :
No connection to system DBSQL found:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not create JCO connection.
'user' missing
1) i have created JDBC Driver as mentioned in sap note
2) created System object
3) created destination as required in EP 7.1 and above
4) mapped user in user administration
when i am testnig connection its giving above mentioned error
same system object when i am creating for EP 7 its working fine with all 3 jar files and system creating succesfully
plz help

Problem Create System Object in the Portal for connecting CRM abap

Hi, i creating system in the portal (JCX) for connecting system ABAP CRM (CRX), after create system try run test connection and show messages error:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
In the logs the portal (NWA) show messages:
Failed in creating the JCO Connection.
The logs operation system (log Security_audit.log)
Error> occured >Thu Jun 23 11:34:41,278<RfcException: message: 'mshost' missing Return code: RFC_INVALID_PARAMETER(19 Return code: RFC_INVALID_PARAMETER(19)    error group: 101 key: FC_ERROR_PROGRAM
     at com.sap.mw.rfc.api.RfcOptions.checkParameters(RfcOptions.java:438)
     at com.sap.mw.rfc.api.RfcApi.RfcOpen(RfcApi.java:688)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1079)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3256)
Plase help, any idea?

message: 'mshost' missing Return
During the System Object Creating in System Landscape, there is any entry as Message Server Host: CRM MS HOST
and Message Server Port : sapmsSID and add this entry in etc/services --> bottom samsSID 36NN/tcp where NN is instance number.
Try this and let me know.
Thanks
SM

System crash while using Callable objects for SAP transaction !!

Hi all,
i have created a CO to use SAP transaction, i have created a system, its connection test is successfull.when i create the CO and specify the system and Tcode, and Test it, its giving a Short dump saying its crashed, do anyone knows the rerason??please guide me
Thanx in advance

Hi Audrey
The Help for SAP Transactional iView can be found here - but although I have followed these steps and an associated blog it still does not work for me. Perhaps you will have more luck. See below for my particular error (if your able to help me ;-).)
SAP Help for SAP Transactional iView
http://help.sap.com/saphelp_nw04/helpdata/en/02/f9e1ac7da0ee4587d79e8de7584966/frameset.htm
SAP Blog for the same
Create SAP Transaction iView using SAPGUI for Windows
NOTE : Sadly I cannot get mine to work !! ****
I'm also trying to create a SAP Transaction iView. Following these steps.
I can preview the iView OK. So it seems that System and Alias are OK.
BUT when I logon as a user on the Portal with that iVew it fails with the same type of error you had.
"Unable to lookup System 'SAPDBEAlias'. Please check the system object and the alias.."

Difference between usage of "System -- Services for object" and GOS direct

Hey folks,
i was wondering if you know an answer for that problem:
1) Start ME23N (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function" Thats the behavior a want
2) Start ME23N and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. But there is no message coming up?! Same user, same PO! It seems that the Toolbox is just beeing restartet and thats it.
Same behavior in IW53/IW33 too, no auth error message if GOS is started via "System --> Services for Objects".
Thats our system:
ERP ECC 6.04 with NW 7.01
SAP Gui 7.20 PL 3 (signature design)
Thanks for your help and best regards
Olli
Edited by: Oliver Grewenig on Jan 18, 2012 11:30 AM

Hi Oliver,
I have done a similar testing for Tcode FB03 since I have done Archivelink configuration for this FI object.
Case 1:
=======
Start FB03 (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function"
Case 2:
========
Start FB03 and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. Still got the same error message "You do not have authorization for this function".
Later I added the required object in the authorization profile and it worked in both the cases mentioned above.
Since the same program is being executed behind both the cases, it will check the same authorization object as designed.
What I would suggest is that you perform this test again and ensure that no one modifies the authorization during your testing period.
Regards,
Deepak Kori

System object for BI 7.0

Similar Messages

Maybe you are looking for