System Object For BI In Visual Composer
Dear portal Gurus,
I have some rfc's in BI server and i want them to access in Visual Composer,so i created a R3 dedicated server system object for that BI server but when i'm entering that value of the RFC it is unable to access ,so is that we should create a load balancing system object for that BI server,
Plz Help me
Thanks and Regards,
sathya.
are you able to see your rfc in the drop down list in the models section?
Also do check in your portal system object if SAP System type is SAP_BW.
Hope this helped you.
Similar Messages
-
Could not retrieve System Object for the alias.
Hi all,
I have installed a business package (Maintenance Technician) and created system SAP_PM with aliases SAP_ECC_Manufacturing, and SAP_ECC_Common. When I am logged into portal using Super Admin role, all the iviews of business package are working fine. But when I am logged in using normal user, all iviews in the business packages are throwing the following exception. Any ideas why? I appreciate your input.
<b>Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_ECC_Manufacturing', System ID: 'pcd:portal_content/com.xyz.fl_systems/com.xyz.SAP_PM'. User: 'abcuser',
Reason: Access denied (Object(s): portal_content/com.xyz.fl_systems/com.xyz.SAP_PM).</b>
Thanks
Vicky R.Hi Vicky,
can u pls share ur experience how did u solve this problem, i too facing the same problem.
what i did created one user who is already existed in BI System and created few iviews related to BI Reports.
when i logged in through that user id in portal , while executing system is throughing the error what u have faced.
Could u please let me know how did u solve that problem.
Thanks in Advance
RamanaRao V -
Data from different systems in one report in Visual Composer
Hi,
I want to create a dashboard report in visual composer where in I have a set of 10 tables data to be displayed in one page out of 10 queries I am getting the data for 5 of the reports from Bi system and for other reports we get it from CRM system .Can I place data coming from 2 different reports in one view.If so how is that possible.
What are the advantages we have in Visual composer apart from WAD .
Regards,
MayaHi,
Two different reports can be placed in one iview, but as far as i know it is not possible to combine two reports data into single table.
regards,
Pruthvi R -
Error while creating a system object for R3 in portal
Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AMI created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj -
Creation of system object for customized workflow
Hi Experts,
I am required to define a System Object with system alias, for creation of UWL to trigger Customized work flow's.
What WAS properties and Connection Properties and ITS Properties i should maintain in newly created System Object?
how do create UWL so that it triggers Customized workflow instead of standard workflow in R/3?
I have similarly total 3 Customized workflow so do i need to create three UWL's for each one?
Please help me out!
Regards,
SivaHi Shabir,
I am new to EP can you please let me know how to create custom connector? that triggers three custom developed workflow?
and Please let me know what parameters to pass to create system object(like WAS Properties, ITS Properties etc)
Thanks in advance!
Regards,
Siva -
System is not appearing in Visual composer!!
Hi all,
i have created a system on my portal to connect the R/3 backend, system is working fine but when i access visual composer by following way :
http://ep62:50100/VC
and clicks on find data, i am unable to find the system created by me, does anyone know why this is happening?? Is anything wrong with my VC settings?HI Ameya
In VC storyboard go to Tools>options>complier>In the Runtime tab
1) Select the Flash option and click the find data and Now check whether your getting the system
2) If you face the problem again check the webdynpro in Runtime tab in tools option
Hope this helps,
Regards,
Arun -
Do we need to create or actiovate any system objects for ess mss applicatio
Hi
I am new to ESS MSS business packages.i know we need to activate 5 pairs of JCO destinations,
do we need to create or activate any system objects ,because ess mss applications contains transactional iviews also
how they will communicate.once you placed the portal content, the default system objetcs for ESS and MSS are delivered by SAP only, we need to configure the same like JCO destinations.,
-
Why create BI SAP Query System in EP successful,but visual composer error?
hi,guy,
i create BI SAP Query System in EP test successful.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful .
now,i use VC find data relational system error
error info:
Eroor-21003 cannot retrieve catalogs and schemas.
Failed to connect to backend system. Check your system definition and user privileges.
pls help me.thanks.The connection was previously working and then it stopped after I imported a large amount of data to the SQL db. So the permissions should be fine.
Any other ideas? -
System object for BI 7.0
Hi ALL,
When creating Iview using BW webtemplate in portal 7.0 using BI 7.0.It is not prompting to select the system .. where as for 3.5 it will propmt to select system ... for BI 7.0 where exatcly we specify the system .u can give system id in iview properties System
-
Stored Procedure For Web Service in Visual Composer 7.1
Hello,
I want to use stored procedure for Webservice in Visual Composer 7.1
I can find this Web service but not supported. ( ex) prcreleased_test - Not supported )
Log.
Message: Error in connection - Can' t execute Web service.
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.processExecution:
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb
Log2
Message: Stopped further execution since the interpreter is unusable
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.XGLInterpreter
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb '
Help me^^ plz..Hi Tanna.
Thanks for your reply^^
I create webservice that access my stored procedure.
But not supported.
http://dmp.humaxdigital.com/HumaxCmdwService/Service1.asmx?wsdl
There are two service. (Hello World - Test, prcrelease_test - Stored Procedure )
'Hello World' is supported but prcrelease_test is not supported. I can't drag to storyboard.
Our company's DB is MSSQL2005.
please help me^^ -
Can i have trial version for visual composer 7.0 or sapnetweaver 2004?
hi all,
Can anyone help me out where can i get trial version for visual composer 7.0 or sap netweaver 2004.
And what is the system requirement to install the visual composer.
thanks
PoojaHi Pooja,
Have you checked this? https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0576c7e-e306-2a10-37b8-a25d82e6f9d8
Also, please check if you have Adobe SVG Viewer 3.0 and MSXML 4.0. These are reqd for VC
Let me know if it helps
Regards,
Vani -
System object with same credentials for all users?
Hi everyone
I would like to create a system object in Portal, which can be used by users in a specific group. However, I want all users to use the same credentials for this system. Is this possible?
I've tried creating systems, but they all seem to require user mapping to work correctly. Is there some way I can create a system object with the credentials as part of the object, and then just assign permissions to it as required?
Please let me know if this raises any questions.
Thanks
Stuarti dont think it is possible to create a system object for all the users with same credentials.anyways you are trying to create system object for some users who belong to a particular group.so you need to do only one time user mapping for that group
go to user administration-search for the group-go to user mapping tab-give username and password..
reward points if helpful -
Dear all,
im using Visual composer 7.0 and trying to build an application for Real Estate.
when i goto BAPI transation in ECC 6.0 i can see my bapi
bapi_re_sc_create with diffirent input parametrs than those
appearing in the visual composer (input ports).
does this mean i have to raise a message to SAP or did
someone come through this error before ?
Regards,
SamiPrachi,
i have made sure both system and client are same.
please if anyone has access to visual composer and transaction BAPI
check input ports for BAPI_RE_SR_CREATE in visual composer and in transaction BAPI select the filter all, and then select
Real estate Management --> Flexible real estate -->
RESearchRequestREFX --> Create.
check import parameters are they the same -
Hello Experts,
I wanted to access Visual composer available with SAP Discovery server. Can anybody give me pointers for the same?
Regards,
VivekHi Vivek
Discovery System: SAP Analytics (developed with Visual Composer model)--->>refer this Blog
/people/oleg.figlin/blog/2006/06/20/sap-discovery-system-for-enterprise-soa--part-1
/people/oleg.figlin/blog/2006/06/26/sap-discovery-system-for-enterprise-soa--part-2
/people/oleg.figlin/blog/2006/09/22/sap-teched-06-amsterdam--sap-discovery-system-for-enterprise-soa-workshop--update
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0b576f5-2d7b-2a10-6aa6-af4f52a5203c
Regards
Abhishek -
Hi,
I have worked on Visual Composer but not with BI system.
This time the requirement is to query data from BI system and display it in Visual Composer. The two options i could think of are as follows
1. Using BI Kit - Which i dont know how to install in CE 7.1. Do we have any documentation on how to get this enviornment ready for this development ?
2. Exposing Bex queries as Web Services - Which i am not sure is possible or not ? And also how much effort it will take if compared to the 1st approach.
Thanks in advance,
AshutoshHai ,
Try this useful reward points .
BI XMLA Connector
Use
Microsoft's XMLA (XML for Analysis) facilitates Web services-based, platform-independent access to OLAP providers. The BI XMLA Connector enables the exchange of analytical data between a client application and a data provider working over the Web, using a SOAP-based XML communication API. The XMLA Connector sends commands to an XMLA-compliant OLAP data source in order to retrieve the schema rowsets and obtain a result set.
The BI XMLA Connector allows you to connect applications built with the BI Java SDK to data sources such as Microsoft Analysis Services, Hyperion, MicroStrategy, MIS, and BW 3.x. This connector is fully compliant with the J2EE Connector Architecture (JCA).
You can also use the BI XMLA Connector to make these data sources available in SAP BI Systems via UD Connect, or you can create systems in the portal based on this connector.
The BI XMLA Connector implements the BI Java SDK's IBIOlap interface.
Prerequisites
XMLA-compliant OLAP data sources, such as SAP BI (BW) system release 3.0A or greater
Connector Properties
Refer to the table below for the required and optional properties to configure for your connector:
BI XMLA Connector Properties
Property Description Examples
UserName Data source user name.
User must have at least read access to the data source. (your user name)
Password Data source password. (your password)
Language Two-letter abbreviation of language. Determines logon language for SAP BI systems, and specifies the language of exceptions evoked on the BI Java SDK layer.
Optional. EN=English
DE=German
URL Server URL.
To find the URL of an SAP BI XMLA provider:
Start transaction SE37 and execute the function module RSBB_URL_PREFIX_GET.
Use the following values for the import parameters of the function module:
I_HANDLERCLASS = CL_RSR_MDX_SOAP_HANDLER
I_PROTOCOL = HTTP
I_MESSAGESERVER =
The URL takes the following form: */sap/bw/xml/soap/xmla. SAP BI XMLA provider -- http://[domain:port]/sap/
bw/xml/soap/xmla
Microsoft Analysis Server --
http://[domain:port]/
isapi/msxisapi.dll
DataSource Data source info property. Local Analysis Server
Statefulness Statefulness support.
Optional. Default is false. true or false
Logonmethod Specifies authentication mechanism (logon method).
If using SAPLOGONTICKET, see the For the BI XMLA Connector only section in Configuring the BI Java Connectors for information on using Single Sign-On with the BI XMLA Connector. UIDPW - Log on to your XMLA provider using User/Password. Use this method for XMLA-based access to non-SAP BI providers, or for User/Password access to SAP BI providers. This is the sole authentication method supported in the unmanaged environment.
SAPLOGONTICKET - Log on to your XMLA provider using SAP Logon Ticket (supported by SAP BI XMLA providers). Use this property if you want to use the SAP Logon Ticket (SSO) to access BI systems.
Timeout Maximum time to wait for the SOAP connection (in milliseconds). Default is 30000 (thirty seconds). 60000 - to increase timeout to one minute
See also:
To configure BI Java Connector properties in the SAP NetWeaver Application Server's Visual Administrator, see Configuring the BI Java Connectors.
To create a system on the portal using the BI XMLA Connector, see Creating Systems and Editing BI XMLA System Properties.
For information about the BI Java SDK and its connection architecture, refer to the index.html file inside of the SDK distribution package
For more information about Sunu2019s J2EE Connector Architecture, see http://java.sun.com/j2ee/connector/
1. For more information about XMLA, see:
1. http://www.xmla.org/docs_pub.asp
2. http://msdn.microsoft.com/library/default.asp?URL=/library/techart/XMLAnalysis.htm
Regards ,
Venkat
Maybe you are looking for
-
How do I delete pages from Preview (Mt Lion)?
How do I delete pages from Preview? (Mountain Lion)
-
Sound with cd rom but nothing else
my problem is my sound works only with my cd rom and nothing else running windows me windows 98 se and windows xp works fine but nothing with windows me i have loaded all the drivers and updated them in the device manager it says with a ? mark
-
Finding out the field name from the columns shown on the screen
Hi, I am new to CRMOD. I see a lot of columns shown on the screen, say in the Account object. Is there a way to find out which column in the Detail screen maps to which exact field in the Admin page ? Appreciate all the help Regards
-
TS3694 i cant restore my ipod touch
i cant restore my ipod touch
-
FLV video is showing as white box
Hi everyone I am really puzzled here I have converted video to FLV format and when I go into dreamweaver 8 / CS3 I go to the top menu, select insert, then select flash video I select the file I am using I then select auto detect for the video to be t