System of newly started session does not allow scripting.therefore the sess
Hi,
i am getting an error when i am running the Test script using ECATT is "system of newly started session does not allow scripting.therefore the session cannot be recorded" for recording a transaction
Please let me know the solution asap if you are aware of it.
regards
vishnu
>
vishnukvv wrote:
> Hi,
>
> How can i check that whether particular client and front end is allowing ECATT and Scripting in my system.Please answer ,if you know.
>
> regards
> vishnu
Hi Vishnu,
1)Go to RZ11.
Enter Profile name aas SAPGUI/USER_SCRIPTING and the default value should be true.
Current Value should be set to true. -
This needs to be done by BASIS admin team.
2)Request System Admin team to allow eCATT and CATT allowed in this system.
3)In the SAPGUI front end at the menu,you have options to enable scripting.
The first two steps will be done by Basis team and the step(3) can be set by you.
Regards,
SSN.
Similar Messages
-
System does not allow to void the payment on same day
Dear All,
System does not allow to void the payment on same day in R12. e.g. If payment is made on 18-NOV-2010, system does not allow to void on 18th. We can void payments if void date is greater than payment date.
Please let me know if you have any information to void payments on same day.
Thanks in Adavnce.
Thanks,
AstikHello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael -
How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.
Hi, I had the same problem you described, and I noticed that there are two ways of activating text to speech on iBook for Mac, with different speed results (at least on my MacBook Pro Retina display)
On your iBook you can select the text and and then click on > More> Start speaking, and you will get a certain speed, which tends to be too slow.
But you will get the speed you had selected with "Go to System Preferences>Dictation and Speech>Text to speech. In there is a slider to adjust the speaking rate." if you use the TOP MENU (next to the black apple) under Edit>Speech>Start Speaking. I also learned that under System Preferences>Dictation and Speech>Text to speech, there is an option for a shortcut which is very helpful. And you can change Key. Hope this was helpful. -
Last night my ipod touch(with iOS 5 beta 4) tried to reboot itself and is just not starting. it does not allow me to do anything and does not start till it's battery is exhausted. iTunes is not recognizing it. pls hlp............!!!!!!!!!!
Please post in the developer forum using your account credentials.
Stedman -
Field VBUND does not allow changes to the document ?
If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
I can't change trading partner.
Thanks!!
Message was edited by: Rico WangRico,
Using trn code SM30, modify table V_TBAER and insert the entry
BSEG-VBUND for account type S, D, K, A
and see the effect.
Thanks
Mohit
ps: you may want to check OSS notes as well. -
Frustratingly my gradient dialogue box does not allow colour gradient the colour stop is inactive
My gradient dialogue box does not allow me to use the colour stop slider, only black and white, the colour stop box is inactive
Your last post was blank. Perhaps you tried to attach a screen shot to an email, which is not allowed on the forums. TO show a screen shot you must come back to the web page and use the camera icon to embed an image, like this:
-
Received an iPad for Father's Day; during email setup, not able to send a reply to an email as a message appears stateing "Message not sent as server does not allow relaying." Can receive emails with no problem. Whoes server, theirs or mine.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
On Att webmail the link for an open email does not allow closing of the email.
When placing the cursor on the "x" to close the email, the cursor becomes inactive. This just started with the past week or so. Called Att because I thought it was a problem with webmail but they asked me to try Internet Explorer which I did and it does not have the problem. So I assume it started with an update to firefox.
Separate Issue;
Your System Details shows;
Installed Plug-ins
Shockwave Flash 11.9 r900
Shockwave Flash 17.0 r0
Shockwave Flash 16.0 r0
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''Version 17.0.0.134<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there? -
Field WSTAT does not allow changes to the document FI
I try leave the field BSEG-WSTAT changeable in document FI. for this, I added field In the table TBAER for account type S, D, K, A. But in the test the field in document is not ready for input.
Please help meDave
Thank for you answer
But, in fact, that is what I did, and like result the field this in the table TBAER. However the field is not ready for imput.
I must rectify the name of the field is BSED-WSTAT, not BSEG-WSTAT
any idea? -
OK, I have a great iPhone 3G issue for you. Here it is...
In order for me to retrieve my voice mail messages on my office land line, I have to call my office direct dial phone number. After that outgoing message begins to play, I have to press ** on my iphone keypad to prompt the voice mail phone system to let me know dial my extension number and password. On my old iphone 2G, it works fine. But with the new iphone, it does not. Another words, when I press **, it does not allow me to the part where I dial my extension number and password. It instead instructs me to dial my extension number and leave a message (not enter my password). Possibly the ** tones from the new phone are too short? Not sure? There are two other people at my company that are having the exact same issue on their 3G phones as well. I even went to the AT&T store and tested it on the display iphones there. Same problem...I was on the phone for an hour today with tech support. I spoke first to a tech support agent and next to an iPhone product specialist. Neither had heard of this issue, but I referred them to this thread and they now know it is an issue.
The product specialist tried to solve the problem and could not. He told me he was emailing the engineers to determine a workaround. He told me he would call me by Tuesday at the latest. His name is Richard and I will continue to update our progress in fixing this issue as I receive information.
If we can't access our land line corporate voicemail I don't see how I can keep the iPhone even though it otherwise works well and has many positive benefits over the Windows-based smartphone I was using (and may have to go back to). -
When sending a message to some email recipients, appears the following message "The recipient X was rejected by the server because it does not allow relaying.
See the previous discussions on the right side of the page under the heading "More Like This". The one with the green checkmark was solved.
-
Rejected by the server...does not allow relaying
I have 3 Verizon Email accounts, when I try to send an email from my iPhone, I get the following message: "The recipient "[email protected]" was rejected by the server because it does not allow relaying. The "[email protected]" is the account I am trying to send the email FROM on my iPhone.
I was able to send and receive my Verizon email on my previous cellphone; Samsung Omnia.Okay, I solved my own problem with the help of a thread on another site. I am posting my findings here in the hope it may help someone else.
1. Go to Settings
2. Select "Mail, Contacts, Calendars"
3. Select the email account with the problem (being rejected by the server...does not allow relaying)
4. Scroll down to "Outgoing Mail Server"
5. Select SMTP (mine says "SMTP outgoing.verizon.net", because my email account is with verizon)
6. Under "Primary Server" select the server (again mine says "outgoing.verizon.net")
7. Make sure Server is ON
8. Make sure the User Name and Password are filled in (mine was Not filled in)
9. Click "Done" in the upper right corner of the screen
10. Now go back to the email account screen
11. Click "Done" in the upper right corner of the screen
That's it, it worked for me and my email went out right away. -
Why was my email that I sent from my iPhone rejected by the server because is does not allow relaying? The email that was sent is a yahoo.com address.
Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server SMTP>Primary Server then turn Server ON and fill in both User Name +Password under Outgoing Mail Server.
-
Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1 Server 2
Server3
RDSession Host RDSession Host
RDSession Host
Connection Broker Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
-poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your helpHi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki -
How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back. Thanks.
Start with reinstalling Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
Maybe you are looking for
-
Hi everyone, I am currently using Adobe Muse CC 2014 - all the videos currently on Adobe TV have 2013 information which are slightly different to the current Adobe Muse. When placing a link to an email address I click on the Hyperlinks heading - it u
-
Can I have multiple TVs with apple TV?
I'm sorry to ask this mundane question but I was looking at getting an Apple TV but I am wondering if I can use it on mare than one tv?
-
Can anyone help me? I use Windows 7 and after the last update not sure if iTunes or Windows but it would not open any longer because the mobile device failure. I followed the instructions to delete everything in the order listed and search for all a
-
Hi all, I have enhanced standard IT 0584 through PM01. There is addition of 10 fields in that infotype through include structure CI_P0584.All these fields follow customer namespace starting with 'ZZ'. Problem :- When i try to maintain the master data
-
Relative date as selection option
Hi Experts, could any of You pls help me to define a relative date as selection options? I have a program about production order selection with a start date as selection option (AKFO-GSTRP). I would like to run this program daily as a background job