System only works on first power up after plugging in graphics card

I have a MSI Lightning R7970 that I purchased new however there's an odd problem with it that the internet does not seem to have answers to. Basically my computer only works for the first time after I plug in my graphics card into my motherboard and it works pretty flawlessly (including gaming for hours) until I shut it down or it goes into sleep mode. After that, the computer cannot power up fully but instead only keeps cycling with the fans turning on 1 second and turning off again. This happens all the time and definitely isn't a seating issue because I've gone through this a lot of times already.
If I take the graphics card out and instead rely on the motherboard onboard graphics, this issue doesn't occur at all. I've pulled out every other component in the system and spent multiple afternoons trying to find another cause but I can't find anything wrong. Everything in the system is new.
So should I RMA the graphics card? Or are there other settings I should check?
My config includes i5-4670k, Asus Z87I-Pro, Silverstone ST70F-ES, Crucial Ballistix DDR3 4GBx2.

Quote
first time after I plug in my graphics card into my motherboard and it works pretty flawlessly (including gaming for hours)
So should I RMA the graphics card?
no
Quote
Or are there other settings I should check?
My config includes i5-4670k, Asus Z87I-Pro, Silverstone ST70F-ES, Crucial Ballistix DDR3 4GBx2.
could be anything, BIOS/mainboard issue, PSU issue, ram issue
some kind of mainboard shorting issue
to check the video card: test it in another PC

Similar Messages

I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

NB520, Replaced display, only work with AC power, not work with battery

Hi
I just replaced a broken display on my 7 months old Toshiba NB520 and now it only works with AC power.
The battery icon shows 52% but not charging.
When I plug out the AC power, it turns off.
Help

Please help guys. I dont know what more to do...

Power Mac G5 crashes after installing new Graphics Card

Hello, this is my first post and if anyone can offer any help with my problem I would greatly appreciate it. Sorry for the long description, but I want to get all of the facts out.
Its a bit convoluted, but here goes...
I was having a problem with one of my G5 computers and I thought at first that the problem was the graphics card. So I bought an ATI Radeon 9600XT card on eBay. Before that card arrived, I determined that the problem with the computer was a faulty firewire card, I replaced that and this computer now runs fine.
After the Radeon card was delivered, I put it in another G5 (1.6 processor) being that it was an upgrade from the nVidia GeForce FX 5200 that was already in the computer. After about a week, this computer crashed and crashed repeatedly. So I switched the card back to the original nVidia GeForce FX 5200, but it still kept crashing.
I then initialized the drive and reinstalled 10.4. This did not solve the problem, the computer keeps crashing with the screen that says "this computer needs to restart..." same as before. I then swapped this nVidia GeForce FX 5200 card with another identical nVidia card that I have from a 3rd G5. This not only did not stop the crashes, but caused this third G5 to crash.
When I start the G5 1.6 up in safe boot, the computer does not crash and will run stable.
I really would appreciate any advice.

Ok I ran AHT on both machines and everything passed on both. The G5 #1 (1.6) restarted and ran ok (in and out of sleep mode) overnight. When I shut down, the screen went dark and all seemed well, but the computer never actually "shut off".
Anyway I thought that if I could pull the panic logs from each machine that it may be helpful for someone to diagnose just exactly what is going on. So here are the panic logs for each G5.
G5 #1 (1.6)
Wed Jan 26 00:01:12 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000A30B0025 PC=0x000000000003FFD4
Latest crash info for cpu 0:
Exception state (sv=0x5C3BB780)
PC=0x0003FFD4; MSR=0x00009030; DAR=0xA30B0025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4428BA10; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000003 0x0002BDCC 0x002FC474 0x002FC61C 0x00303E28 0x00303F9C
0x002DA43C 0x002DA3B4 0x002E9ACC 0x002EB94C 0x0008C248 0x00029234 0x000233F8 0x000ABEAC
0xA1B1C1D3
backtrace terminated - frame not mapped or invalid: 0xBFFFE240
Proceeding back via exception chain:
Exception state (sv=0x5C3BB780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x6E264280)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x02158070; DSISR=0x40000000; LR=0x9000AE9C; R1=0xBFFFE240; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x5C3BB780)
PC=0x0003FFD4; MSR=0x00009030; DAR=0xA30B0025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4428BA10; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000003 0x0002BDCC 0x002FC474 0x002FC61C 0x00303E28 0x00303F9C
0x002DA43C 0x002DA3B4 0x002E9ACC 0x002EB94C 0x0008C248 0x00029234 0x000233F8 0x000ABEAC
0xA1B1C1D3
backtrace terminated - frame not mapped or invalid: 0xBFFFE240
Exception state (sv=0x6E264280)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x02158070; DSISR=0x40000000; LR=0x9000AE9C; R1=0xBFFFE240; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
G5 #2 (Dual 1.8)
Wed Feb 2 15:18:00 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000A3010025 PC=0x000000000003FFD4
Latest crash info for cpu 0:
Exception state (sv=0x5D0D6280)
PC=0x0003FFD4; MSR=0x00009030; DAR=0xA3010025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4521BAD0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0002BDCC 0x002B1B68 0x002BABD8 0x002BAFA4 0x002C25BC
0x002C268C 0x002EA2C0 0x0008ADB8 0x00029234 0x000233F8 0x000ABEAC 0x2F2F2F2F
backtrace terminated - frame not mapped or invalid: 0xF007FC50
Proceeding back via exception chain:
Exception state (sv=0x5D0D6280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x5D6F1500)
PC=0x9000AF48; MSR=0x0000F030; DAR=0x009F5564; DSISR=0x40000000; LR=0x9000AE9C; R1=0xF007FC50; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x5D0D6280)
PC=0x0003FFD4; MSR=0x00009030; DAR=0xA3010025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4521BAD0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0002BDCC 0x002B1B68 0x002BABD8 0x002BAFA4 0x002C25BC
0x002C268C 0x002EA2C0 0x0008ADB8 0x00029234 0x000233F8 0x000ABEAC 0x2F2F2F2F
backtrace terminated - frame not mapped or invalid: 0xF007FC50
Exception state (sv=0x5D6F1500)
PC=0x9000AF48; MSR=0x0000F030; DAR=0x009F5564; DSISR=0x40000000; LR=0x9000AE9C; R1=0xF007FC50; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Again, I appreciate any advice...hope this will be of help in diagnosing the problem..

After choosing the graphics card (Quadro 4000) as recommended by adobe ..we have problems....

http://helpx.adobe.com/after-effects/using/rendering-opengl.html
http://www.nvidia.com/Download/index.aspx?lang=en-us
After choosing the graphics card (Quadro 4000) and then adobe as the partner the following applicatons are shown. I have noticed that the only CS6 product is the Premiere Pro CS6 but we do use the whole Adobe Master Suite.
Can Adobe please provide clarification on what version of driver is required for the Adobe Master Suite CS6 when using the Quadro 4000 graphics card in windows 7 64bit (pro)
We are having constant problems with crashing programs ACROSS the SUITE,unsee-able footage,drop frames on outputs( reguardless of WHAT SETTINGS.) and system lock ups. All codecs are on board ,Our I T staff and production staff are pulling their hair out as one conflict /problem is resolved , another is created somewhere else.
have tired latest recommended drivers and rolled back a few. still NO resolution.
THe systm has,at adobe 's tech recommendations, had adobe cleaner remove ALL and cloud has reinstalled all of the master suite. still no resolution.

This could be a combination of factors or a bad Quadro card of which I would not be surprised. You may want to contact me direct on this one so I can remote in and see what is going on.
Eric
ADK

No Signal after installing new graphics card

Hello and thanks in advance for your help!
We have a 2yr old HP p6540y. It has an ATI integrated Video Card. When we recently turned it on, we got a 'no signal' message on the monitor and then it would go to sleep. We have tried several things to fix...listed below, in order, and are still getting the same message. Please advise!
1) No Signal: DVI, VGA, HDMI. So we unplugged and restarted, no change.
2) Checked monitor and DVI & VGA cords with another computer: They all work.
3) Installed new Graphics Card: NVIDIA GEForce GT 610. Still got same 'no signal' message.
4) We plugged/unplugged all other cards/cords/anything we could and cleaned out. Then, finally, the monitor turned on! But not for long....
5) After restarting computer after installation of graphics card driver, we got the 'no signal' message again. We once again, pulled out other cards/plugs and again the monitor/computer came to life.
6) We unistalled the integrated ATI graphic card. When we go to Display, Advanced Options, it lists our new NVIDIA as graphic/display card.
7) We turned computer off overnight and this morning when we turned on, we once agin got the 'no signal' message. We unplugged/plugged computer in several times. Also tried the trick with pulling out cards/plugs and we got nothing. No Signal. After doing this several times (about 10), it finally worked again.
8) We changed sleep settings to: Screensaver=Never; Sleep Mode=Never.
9) We restarted again to once again get no signal message.
So...what do we need to do?
Thanks so much!
This question was solved.
View Solution.

Triusa, welcome to the forum.
I suspect that your problem is caused by the power supply unit (PSU). Here is a guide to help you troubleshoot the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06788&lc=en&dlc=en&cc=us&product=502610&rule=...
Also, the existing PSU is 250W. The GT 610 requires a minimum of 300W.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

FPS drop in the game Counter strike after updating my graphics card.

Hi, i just updated my graphic card drivers and after that the fps on a game i like to play dropped to about 5. Before it was 70-100.
Its just unplayable and i cant figure out what it is, it has to do with the update.
I tried another game and it floats the same way as before.
The pc is a HP-Pavilion and the mode name is VN278AA-UUW m9860sc.
The graphics card im using is ATI radeon HD 4650.
Any idea what it may be?

Hi TIMOWN,
Welcome to the HP Support Forums!
I am sorry to hear the your FPS has dropped so low after updating your Graphics card. I will try my best to help you with this. I suspect that you had a bad update and would suggest rolling back the driver to the previous version.
The steps to rolling back a driver are in this document for Device Manager Information for Windows 8.
I hope this helps, please let me know how it goes.
Good luck and have a great day!
I worked on behalf of HP.

After changing my graphic card to an ASUS Strix GT 970, Photoshop CS6 opens the JPG files without show them on the screen

After changing my graphic card to an ASUS Strix GT 970, Photoshop opens the JPG files without show them on the screen

Try turning off GPU support in your Photoshop's preferences performance section. Also check that you have installed the latest device driver installed for your GT 970 adapter and that all CS6 updates are installed... Your CS6 should be version 13.0.1.3....

Suspend only works for first suspend; later attempts fail (Catalyst)

Currently I am attempting to get suspend working on my desktop. I had managed to get it working, and right after cracking a bottle of Martenellis in celebration, I come to find out the if I enter suspend again, my screen stays black. Sigh.
Now, I am nearly 100% positive this has to do with the Cataylst I am using for my Radeon 6850. I have enabled set the kernel flag
vga=0
properly. In fact, this was what originally allowed me to have the first sucessful suspend.
What could cause the suspend to work once, then fail if attempted again? I am fairly good at problem-solving, so even if you do not know the exact answer your thoughts would be appreciated here. Thanks!!
$ fglrxinfo
display: :0 screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 6800 Series
OpenGL version string: 4.4.13374 Compatibility Profile Context 15.20.1013

I'm having a very similar issue, but someone else said that they had also had it happen twice to them and they're using an Intel graphics card. Currently I've disabled C6/C7 power states for my CPU to see if that will help. It really shouldn't have any effect, but I've already tried so much.
My issue is that if I leave my machine alone and it goes idle and puts the screen to sleep, often the screen won't come back up, it just remains black. I've tried disabling ACPI and that didn't seem to help.

InDesign CS5.5 Exporting PDF master page hyperlinks only work on first 2 pages

We recently upgraded from CS5 to CS5.5 and now our hyperlinks that go to different pages in the PDF only are working on the first 2 pages of each document in the book. We have about 30 documents wrapped up in a indesign book. On the master page we have hyperlinks that allow users to quickly go to the index in the back of the book. After the CS5.5 upgrade the hyperlinks only work the the first 2 pages of each document. We export to PDF(print) with hyperlinks enabled.
I have tried the below:
- I have tried 2 different computers
- Deleted and re-created the indesign preference file
- deleted and re-created the hyperlinks

Can you recommendd the best way to manage the following:
I'm on a Mac. Created an enewsletter for a client in Indesign CS5 with 7 "click here"s throughout the document. The hyperlinks are to connect w other PDF documents not URLs.
Where will I have the best luck creating the hyperlinks - Indesign or in the PDF I export? I have Acrobat Pro if I need to create the hyperlinks in the PDF.
Except I can't figure out how to create the links in either program as far as what name to designate and where do the PDFs reside so people can link to them? And do I enter the file name of the PDF connected to the particular "click here."

Suspend command only works the first time

I'm seeing a strange issue with my machine. If I suspend the system by using either:
systemctl suspend
or
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
the system will suspend the first time, but then if I try to suspend again, it doesn't suspend completely. The screen goes black and my external hd shuts down, but the box doesn't shutdown. It stays running.
Could anyone offer some suggestions on what to check?
I checked the systemd journal and I don't see any errors that stand out as being the problem.
Last edited by Gumper (2013-03-03 13:28:56)

I've got a similar error. When trying to suspend via systemctl the machine goes down.
The screen goes blank and I can hear my harddrives spinning down but before they go completely silent, the system comes back up again.
Fully working as if I never even wanted to suspend. I'm pretty sure my drives don't like that a lot.
The first time after a boot works however, as mentioned by Gumper.
systemctl reports this:
A dependency job for suspend.target failed. See 'journalctl -xn' for details.
But I can't see anything related in the journal.
This is my second suspend problem now. I already have trouble waking up from suspension on my notebook:
https://bbs.archlinux.org/viewtopic.php … 5#p1238615
This new problem now is on my x64 desktop machine if that helps. Of course this happens on the same day I clean my pkg cache
Last edited by Orim (2013-03-03 22:56:03)

Hide "more" button in a list view, only works for first item in the list

I have the following code in a list view that outputs several dozen items in a web app. The code only works for the first item, how can I make it loop through and execute the test for each item in the list view? The {tag_hide more button} is a checkmark field that yields a numeric 1" if checked otherwise yields a numeric "0".
<div id="more-option">
        <p class="right"><a href="{tag_itemurl_nolink}" class="btn btn-small btn-very-subtle">More →</a></p>
      </div>
      <div class="more-selection" style="display: none;">{tag_hide more button}</div>
      <script>
if ($(".more-selection").text() == "1") {
    $("#more-option").hide();
</script>

What's the URL for the site where you are using this? Offhand, it looks like it should work with your first example so you are either placing the script before those elements are loaded or you might try wrapping your current javascript inside the:
$(document).ready(function() {
--- your existing javascript here
This make sure the code runs once all the html is loaded on the page. Without seeing a URL and debugging with the js console in Chrome I can't give you a solid answer.
But, I do know that you can probably do this with a lot less markup. Once we figure out what the actual problem is I have a better solution mocked up for you on jsfiddle.
When looking at my HTML code on jsfiddle, please realize I setup some dummy HTML and removed your tags and added actual values which would be output by your tags. The main thing I did was remove the whole div.more-selection and instead, added a "data-is-selected" attribute on your div.more-option element. Then, in my javascript for each div.my-option element on the page, we loop through them, find the value of that data attribute and hide that div if it's less than 1 (or 0).
Here's the fiddle for you to look at: http://jsfiddle.net/thetrickster/Mfmdu/
You'll see in the end result that only two divs show up, both of those divs have data-is-selected="1".
You can try pasting the javascript code near the closing </body> tag on your page and make sure to wrap my js inside a <script> tag, obviously. My way is neater on the markup side. If you can't get it to work it's likely a jquery conflict issue. My version is using the $(document).ready() method to make sure all the code is loaded before it runs.
Best,
Chris

My AS3 buttons only work the first time

I have set up my buttons so that are each a movieclip with 'over' and 'out' states/frame labels. They exist on the main timeline. The actionscript controlling them is situated in a frame on the main timeline and the frame holding that actionscript is on the same point within the main timeline where the buttons are introduced. I am using actionscript 3.
The buttons have been set up so that they navigate to another frame on the same main timeline and on that frame is a movie. The movie dimensions are smaller than the main stage so the buttons are still accessible when each movie is played.
The problem is my buttons are only working once - by that I mean they go to the correct place when clicked the first time, but when they are clicked again they navigate elsewhere.
Totally doing my head in trying find a solution and if anyone can help and show me what I'm doing wrong that would be really really helpful. Here's the code I used for the buttons...
stop();
function mainBtnOver(event:MouseEvent):void {
event.target.gotoAndPlay("over");
function mainBtnOut(event:MouseEvent):void {
event.target.gotoAndPlay("out");
///////// INDIVIDUAL BUTTON CLICK FUNCTIONS
function mainBtn1Down(event:MouseEvent):void {
gotoAndPlay("01Movie");
function mainBtn2Down(event:MouseEvent):void {
gotoAndPlay("02Movie");
function mainBtn3Down(event:MouseEvent):void {
gotoAndPlay("03Movie");
function mainBtn4Down(event:MouseEvent):void {
gotoAndPlay("04Movie");
function mainBtn5Down(event:MouseEvent):void {
gotoAndPlay("05Movie");
////////// Button 1 Listeners
mainBtn1.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn1.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn1.addEventListener(MouseEvent.CLICK, mainBtn1Down);
////////// Button 2 Listeners
mainBtn2.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn2.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn2.addEventListener(MouseEvent.CLICK, mainBtn2Down);
////////// Button 3 Listeners
mainBtn3.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn3.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn3.addEventListener(MouseEvent.CLICK, mainBtn3Down);
////////// Button 4 Listeners
mainBtn4.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn4.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn4.addEventListener(MouseEvent.CLICK, mainBtn4Down);
////////// Button 5 Listeners
mainBtn5.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn5.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn5.addEventListener(MouseEvent.CLICK, mainBtn5Down);
I'm sure it's me doing something very stupid - I'm very new to AS3. Any help much appreciated.
Thanks :-)

If the frame labels you are going to have movie clips that have your presentation content, you should use gotoAndStop("frameLabel") instead of gotoAndPlay("frameLabel"). There's no need to play the main timeline when you go to and show any of these movie clips. I'm not sure if this is your issue, though... Using your code, I had no problems.
Also, you can set up your animated buttons in a way that eliminates the need to have your ROLL_OVER and ROLL_OUT events. This isn't necessarily better, but just another method. Although I might use other ways to animate a button, I do like to reduce the code it takes to use the buttons in an interface, and only use CLICK in most cases.

Exporting PDF files on CS5 - hyperlinks to URLs only work for first page

I'm new to InDesign and am working through the "Classroom in a Book" training workbook for CS5, I 've got to lesson 14 and have found that when exporting to PDF (interactive) format, the hyperlink to a URL only work for the first page of the document.
I made my own document with links on multiple pages, and the same thing happened. I followed the lesson to the letter (3 times!)
I also tried setting up individual links for individual pages and that did work, so how do I get one piece of text to link to one URL on multiple pages of a document (ie on a Master page) ???

Thanks Peter, I've actually got CS5.5, so I presume this patch is already updated on this version, because when I tried the 7_0_4 patch it wouldn't run; giving the message: "Some updates failed to install, and "update is not applicable". So I tried the latest update: 7_5_2 patch, but I'm still experiencing the same problems with hyperlinks not working from the Master pages.

Preloader: Only works on first publish?

Ok. I have a simple animation composed of two SVG's. The SVG's are quite simple (random dots simulating a starfield). This oam file will ultimately be added to a Muse project.
I can successfully publish the animation.
I can add the animation to the Muse project...
Publish the Muse project
On Publish, Muse launches a browser window and viola..
I can see the preloader and Edge animation working ok on first publish...
However, if I refresh my browser, the preloader just hangs the animation...
This happens in a variety of browsers (*Our primary build out is Chrome)
Things to note:
The homepage containing the animation does also include Inserted HTML at the footer of the page. Notice the slow marching parade of accolade logos? This is separate HTML/CSS animation and outside of the Edge animation I am referring to above.
I have tried both he "Immediate" and "Polite" options on the preloader setup
The animation is not very large so my expectation at this time would be that the Preloader just blinks real quick and disappears. This would be a satisfactory result.
I have been deleting browser cache during testing
"Host runtime files on Adobe CDN" checked and unchecked; tested both... no change in outcome...
No audio has been added to the project assets; audio is not being used in this project (unfortunately; I like this feature though)
Links:
http://praxidicelaw.businesscatalyst.com (animation should appear on homepage with a quick preloader and then starfield)
http://praxidicelaw.businesscatalyst.com/testanim.html (a test page with nothing but the animation. No master file applied or other content)
Thanks in advance to any help/assistance...

Quote
first time after I plug in my graphics card into my motherboard and it works pretty flawlessly (including gaming for hours)
So should I RMA the graphics card?
no
Quote
Or are there other settings I should check?
My config includes i5-4670k, Asus Z87I-Pro, Silverstone ST70F-ES, Crucial Ballistix DDR3 4GBx2.
could be anything, BIOS/mainboard issue, PSU issue, ram issue
some kind of mainboard shorting issue
to check the video card: test it in another PC

System only works on first power up after plugging in graphics card

Similar Messages

Maybe you are looking for