SYSTEM OPENING UP TOO SLOWLY

hi all
my system is taking a lot of time to start any kind of applications even though the startup time is nice and desktop appears quickly i cannot launch any applications and it takes atleast 10 mins to launch firefox or any other program.
i have checked my system for spyware and stuff and have found none
i believe that this sitution is due to any patches updated via windows update..this has been happening for the past three days
any sujjestions???
ps:i only have a few applications installed on my system
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

This is strange. I unplugged the power supply and then the unit powered on with the lid opened at a normal amount. But it only lasted maybe 20 minutes and then shut down. I'm pretty sure the battery wasn't fully charged so that might have caused the shutdown. Now I'm wondering if it's a lose wire or something relating to the power supply/battery?
Just thought I'd add that in case anyone has any idea's.
* Edit *
Oh, and then I tried that again but no luck. Won't boot again. The light around where the power supply gets plugged in turns green for a second then you hear that click sound and then it's red.
Sorry for the extra information. Just trying to provide any data I can.

Similar Messages

  • Why the firefoks 3.6.3. work too slowly in windows 7 64 bit , and very slowly open the page.

    Why firefoks work too slowly in windows 7 64 bit and anytime he very slowly open a page . ( not meter what page is about ).
    == This happened ==
    Not sure how often
    == J install windows 7 64 bit

    Open this document http://kb2.adobe.com/cps/191/tn_19166.html
    download the uninstaller mentioned in section 1 (save to disk);
    download the executable installer from section 5 (save to disk);
    run the downloaded uninstaller;
    reboot Windows;
    run the downloaded installer.
    Does the test page now show the correct version?

  • Iphoto is running too slowly.

    My iphoto is running too slowly. I think I have too many pictures. I do not want an editing program. Is iphoto library manager what I need to? I have read so  many of the questions here but can't find one that fits my problem. Will getting the library manage help? Do I delete photos from iphoto then? Is the trial version ok or do I have to pay the $30?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you see when iPhoto opens?
    what fixes have you tried?
    where is you library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    what do you mean by "too slowly"?
    OT

  • Indesign 2014 startup too slowly

    Since June, Indesign 2014 has been opened too slowly at startup.
    I wait usually about 5 minutes and if it still isn't opened, shut it down at task manager and start again. At the second time the program usually opens faster (1-2 minutes).
    All this is embarassing. My computer is fairly well for adobe software, the problem is in something else.
    By the way, the former Indesign (CC) is still on my system too. May be there has to remain only one? In fact I don't use Indesign CC, so can I uninstall it? will it have any influence to proper working of Indesign 2014?

    Many of us leave multiple versions installed (especially for inDesign, which has poor backward compatibility) without a problem. Each version is its own application and does not interfere with any other version.
    I have no idea why you re experiencing such slow startup with Version 10, but I would suspect some sort of software conflict -- either an incompatible plugin or a background program. Does the problem persist if you start the computer in Safe Mode? If you log in with a different user account?

  • Windows 2008 x64 TS Printing - The data area passed to a system call is too small

    Hi,
    I have a Windows 2008 TS using Easy Print. The server has two quad core cpu's with 16Gb of ram and is running a light processing accounting program for 80 users. The machine and easy print both work fine until the server reaches about 5Gb of memory in use. Once this happens user's documents stop printing with event id's 6161 The data area passed to a system call is too small being logged. None of the hotfixes seem to be applicable to my scenario as I am not getting the common "Access Denied" error. I have increased received and transmit buffer sizes on both NIC's to the 2048 maximum, and set the Sizreqbuf setting in the registry - to no avail.
    Any help appreciated.
    Thanks

    Hi,
    Thanks for the post.
    The Event error 6161 is caused by one of the following conditions:
    The printer is not reachable on the network
    Windows cannot allocate sufficient memory
    There was invalid or incomplete data received by the print spooler
    A driver upgrade failed
    There is a bad printer device driver
    For more information, please refer to the following article:
    http://technet.microsoft.com/en-us/library/cc773865(WS.10).aspx
    In this case, I assume that this issue may be caused by the insufficient memory.
    In Event Viewer, examine the event and look for the following text: "Win32 error code returned by the print processor: 8. Not enough storage is available to process this command".
    If so, please collect system information for 60 seconds and generate a System Diagnostics Report:
    Open an elevated Command Prompt window. (Click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.)
    At the command prompt, type perfmon /report and then press ENTER. Reliability and Performance Monitor will start collecting data to create the System Diagnostics Report.
    When the report is ready for viewing, locate the Diagnostic Results section of the report, and then check for any warnings (indicated by Warnings in the report). You can follow links to additional help on resolving warnings from this section. In addition, you can expand each category in the Basic System Checks section to see more details about why warnings appear. Also, the Performance section provides process-level details about top consumers of resources. You might need to increase the size of the paging file or add physical memory.
    Thanks,
    Miles

  • BW System QBW: Result too large

    Hi Everyone,
    when i am running webi report its giving error.
    we are using BO : 4.0 with conncetion.
    BW System QBW: Result too large (917 070 cells);
    data collection is limited by configuration
    (maximum - 500000 cells) (WIS 00000)
    Pls give me any solution for this issue......
    Regards,
    G

    Hi Bhargav G,
    If you still facing this issue.
    Check the below link
    BO 4 webi reports on Bex Query (BI 7.3)
    It might be help you.
    Regards,
    Anish

  • Exchange 2007 SP3 Install on 2008R2 Fails with "The data passed to a system call is too small"

    I'm installing Exchange 2007 SP3 onto Server 2008 R2. I have run this install in compatibility mode and in normal install mode with the same results. Error code 3221684346: The data area passed to a system call is too small. I am installing directly from
    the SP3 files, this is not an upgrade. What do I have to do to get this to work?
    [2/15/2011 7:24:18 AM] [2] Interpreting line <CreateSecureKey:MSExchangeIS\ParametersPrivate> -- ID:31259 --
    [2/15/2011 7:24:18 AM] [2]  CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:1199)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Processing file 'C:\Exchange Server\Setup\data\mdb_reg.ins', at or near line 77 (CreateSecureKey:MSExchangeIS\ParametersPrivate) -- ID:31111 -- CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:488)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Registry file name: 'C:\Exchange Server\Setup\data\mdb_reg.ins' CRegistryManager::ScProcessFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\tools\regmgr.cxx:125)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Filename = 'C:\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScRunRegistryFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1379)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScRunRegistryFile
    [2/15/2011 7:24:18 AM] [2] Filename = 'C:\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1249)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAddRegistryKeys
    [2/15/2011 7:24:18 AM] [2]  CAtomBaseMDB::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_basemdb.cxx:132)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Leaving CAtomBaseMDB::ScAddRegistryKeys
    [2/15/2011 7:24:18 AM] [2]  CBaseAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:639)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAdd
    [2/15/2011 7:24:18 AM] [2] Service = 'MSExchangeIS' CBaseServiceAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:203)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Leaving CBaseServiceAtom(Information Store Service)::ScAdd
    [2/15/2011 7:24:18 AM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2]  ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [2/15/2011 7:24:18 AM] [2] Leaving ScSetupAtom
    [2/15/2011 7:24:18 AM] [2] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [2/15/2011 7:24:18 AM] [1] The following 1 error(s) occurred during task execution:
    [2/15/2011 7:24:18 AM] [1] 0.  ErrorRecord: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [2/15/2011 7:24:18 AM] [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [2/15/2011 7:24:18 AM] [1] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [2/15/2011 7:24:18 AM] [1] Setup is halting task execution because of one or more errors in a critical task.
    [2/15/2011 7:24:18 AM] [1] Finished executing component tasks.
    [2/15/2011 7:24:18 AM] [1] Ending processing.
    [2/15/2011 7:42:08 AM] [0] End of Setup
    [2/15/2011 7:42:08 AM] [0] **********************************************

    I would probably rebuild the host machine. The Exchange installation should occur without any issues, and where a problem does occur that can be an indication of a more widespread problem. Rebuild the machine, reinstall the prerequisites and try again.
    Simon.
    Simon Butler, Exchange MVP
    Blog |
    Exchange Resources | In the UK?
    Hire Me.
    Hello Poster.
    I am having the same issue, however it is most likely NOT a host box problem. The above advice is not a fix. I have 3 servers that are cloned with the same setup. 2 were fixed by doing the Vista compatibility trick, this one gave a different error (which
    happened to be the same as above). This org was a 5.5 to 2000. to 2003 coexistence with 2007 currently(because the mailbox role won't install). It has something to do with AD or permissions. Server 2008 r2 inherently has problems installing exchange.
    Example, having to use vista compatibility to get the mailbox role to install. SP2 patch gives the same error to some people, and also doesn't upgrade the mailbox role properly in some cases. Some people have had luck restarting the IIS admin service, but
    that did not solve my copy of this error. I will repost here if I find a solution to this issue...
    Same exact setup log for me as well.
    [3/4/2011 10:45:51 AM] [2] Interpreting line <OpenMachineKey:SYSTEM\CurrentControlSet\Services> -- ID:31259 --
    [3/4/2011 10:45:51 AM] [2] Interpreting line <CreateSecureKey:MSExchangeIS\ParametersPrivate> -- ID:31259 --
    [3/4/2011 10:45:51 AM] [2]  CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:1199)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Processing file 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg.ins', at or near line 77 (CreateSecureKey:MSExchangeIS\ParametersPrivate) -- ID:31111 -- CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:488)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Registry file name: 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg.ins' CRegistryManager::ScProcessFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\tools\regmgr.cxx:125)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Filename = 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScRunRegistryFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1379)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScRunRegistryFile
    [3/4/2011 10:45:51 AM] [2] Filename = 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1249)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAddRegistryKeys
    [3/4/2011 10:45:51 AM] [2]  CAtomBaseMDB::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_basemdb.cxx:132)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Leaving CAtomBaseMDB::ScAddRegistryKeys
    [3/4/2011 10:45:51 AM] [2]  CBaseAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:639)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAdd
    [3/4/2011 10:45:51 AM] [2] Service = 'MSExchangeIS' CBaseServiceAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:203)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Leaving CBaseServiceAtom(Information Store Service)::ScAdd
    [3/4/2011 10:45:51 AM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2]  ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
               Error code 0XC007007A (122): The data area passed to a system call is too small.
    [3/4/2011 10:45:51 AM] [2] Leaving ScSetupAtom
    [3/4/2011 10:45:51 AM] [2] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [3/4/2011 10:45:51 AM] [1] The following 1 error(s) occurred during task execution:
    [3/4/2011 10:45:51 AM] [1] 0.  ErrorRecord: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [3/4/2011 10:45:51 AM] [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [3/4/2011 10:45:51 AM] [1] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
    [3/4/2011 10:45:51 AM] [1] Setup is halting task execution because of one or more errors in a critical task.
    [3/4/2011 10:45:51 AM] [1] Finished executing component tasks.
    [3/4/2011 10:45:51 AM] [1] Ending processing.
    Just curious though, how long is your FQDN? Mine is 34 characters plus whatever exchange is adding to it during setup for this particular string. I found a post with the same error for ISA server and some buffer is only 100 characters for a system call.
    ERROR_INSUFFICIENT_BUFFER 122 (0x7A) The data area passed to a system call is too small. http://msdn.microsoft.com/en-us/library/ms681382(v=vs.85).aspx Indicates a msft programming problem.
    Outsource Technology Inc. MSFT Professional Consultant

  • Thanks for the reply to my question regarding sound in iMovie and sending me the online links.  however the online links are impossible to play as they upload too slowly with the result that the playing keeps stopping waiting for the content to catch up

    Thanks for your reply to my question regarding sound in iMovie.  However I cannot follow the links you sent as they upload too slowly and therefore the instructional movie keeps stopping waiting for the content toload.  Surely theremust be a solution for this??
    Thanks in advance
    lolly

    Please continue posting in your original thread.
    With the amount of traffic on these forums it is impossible to chase around finding this.

  • BW system open for config for RSA1 display

    Hi
    Our developers have been told by another company that there is a bug in BW3.5 (fixed in 7) whereby the system needs to be open for config in SCC4 to be able to view certain data.
    This is in RSA1 - under InfoProvider they have a Holiday Entitlement - Quote Transactions item which when double clicked brings up a screen showing Update Rules information - Status, Data Fields, Type, Srce Fields. There is also a 'Create Start Routine' button, or, if one is already created, a 'Start Routine' display, and other information they require - more detailed information on the characteristics, Process Chain maintenance and InfoPackage maintenance.
    With the system closed - they cannot see any of this. Update Rules and the 'Start Routine' buttons are not present.
    We are not comfortable having the Live system open and have asked why they cannot do this in Development, as they insist they are not making any changes - they just need to display this information. They say it is required for debugging, and they have to debug in this system, as the debugging depends on the data - which is different in Prod than it is in Dev.
    Does this stand up? Are there other ways they can access this information?
    We tried Note 337950 - Queries (and other objects) cannot be edited - but this hasn't helped.
    If there is a SAP note that does confirm this is a 'bug' and the system does indeed need to be open then please could someone point me in it's direction??
    Many thanks
    Ross

    Sorry for not replying for so long... this one kinda went off the radar whilst there were some more important issues.
    Thanks for the responses... Eric, our SCC4 settings were the same - i.e. system pretty much closed - and they couldn't see anything. Only by changing in SCC4 did they then get the warning message about changing obecjts - which you can bypass - and then you're in and can see everything.
    We're on support package 17; BI_CONT is on 12.
    The roles the users have been developed by their authorisations team... do you think it could be an auths issue? Surely it wouldn't make any difference though if you opened the system in SCC4?
    EmJay - thanks, but this only pops up as per above when the system is open for config. Else you don't get the message at all.
    Cheers
    Ross

  • "The data area passed to a system call is too small" NFS client Windows 2008 R2 SP1

    Hi
    I need to map a Hyper-V virtual windows server to a UNIX folder, but when i made de mapping and tried to navigate in to the mapped unit and shows me:
    "The data area passed to a system call is too small"
    I tried too many things like adding a registry key (and windows 2008 r2 already has)
    Use a similar account between Unix and Windows domain
    I done the steps in the document:
    http://technet.microsoft.com/en-us/library/cc753302(WS.10).aspx
    And nothing, this is just frustrating, also I disabled the firewall in the virtual machine and the host server.
    I have a Windows 2008 Domain R2 functionality and the virtual machine is Windows 2008 R2 too.
    The version of unix are:
    AIX6.1  x64
    AIX 6.3 x64
    AIX 5.1  x86
    Any Idea?
    Thanks!
    Doc MX

    Hi,
    You may perform the following troubleshooting suggestions:
    l 
    Change how your NFS servers export the NFS shares and make them allow connections from high ports.
    l 
    Add UseReservedPorts DWORD value under HKLM\Software\Microsoft\Client for NFS\CurrentVersion\Default and set it to 1. Restart the Client for NFS service to allow
    the change to take effect.
    For more information, please refer to the following Microsoft MSDN blog:
    "Network Error 53", "The data area passed to a system call is too small" or "Unknown Error"
    http://blogs.msdn.com/b/sfu/archive/2011/07/14/3087987.aspx
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Why my compiled swf is loading too slowly?

    Hi,
    Previously we are directly accessing th site with .mxml url.
    Thta time file was loading too slowly. But afterwords, we are
    loading compiled .swf file. It is much better.
    assume, we are having two swfs
    1.compiled swf is 400KB.
    2. and one animated swf is 1.5MB.
    here for our site animated swf it self is loading much faster
    then my compiled swf. Why it is happenning like this? What we have
    to do to load our compiled .swf also to be loaded much more fastly.
    Thanks
    Satish KC.

    Load speed depends on how you have architected the
    application.
    Avoid nested containers. Do not use creationPolicy="all"
    There are articles available out there try google.
    Tracy

  • After reinstalling Yosemite 10.10.2 Bridge opens folders very slowly.

    After reinstalling Yosemite 10.10.2 Bridge opens folders very slowly.

    Thanks Ian! I see the other topics now, and I did the deauthorize thing, although it said this computer was not authorized (I know it was because I just bought songs on it.) So I authorized it again and now it works fine! Except now it says there are 3 computers authorized, I only have 2. I guess it thinks this computer is authorized twice now somehow? I hope this bug gets fixed.

  • -4006 -The data area passed to a system call is too small.

    Hi ,everybody.
    I would like to add data into SQL Server with VB.net 2005 and i am using object SAPbobsCOM.Payments with BoObjectTypes.oIncomingPayments when i build program and execute then i got error like this                 "-4006 -The data area passed to a system call is too small." and my code is .....           
      Private Sub cmdPayment_Click()
            On Error GoTo ErrorHandler
            Dim vCompany As SAPbobsCOM.Company
            'create company object
            vCompany = New SAPbobsCOM.Company
            'set paras for connection
            vCompany.CompanyDB = "TototaData"
            vCompany.Password = "acct4"
            vCompany.UserName = "acct4"
            vCompany.Server = "(local)"
            vCompany.DbUserName = "sa"
            vCompany.DbPassword = "sa"
            'connect to database server
            If (0 <> vCompany.Connect()) Then
                MsgBox("Failed to connect")
                Exit Sub
            End If
            Dim nErr As Long
            Dim errMsg As String
            'Set the object's properties
            Dim vPay As SAPbobsCOM.Payments
            vPay = vCompany.GetBusinessObject(BoObjectTypes.oIncomingPayments)
            vPay.Address = "622-7"
            vPay.ApplyVAT = 1
            vPay.CardCode = "F027-HO"
            vPay.CardName = "TMT(GATEWAY)-HO"""
            vPay.CashAccount = "288000"
            vPay.CashSum = 0 '5620.85
            vPay.CheckAccount = "280001"
            vPay.ContactPersonCode = 2
            vPay.DocCurrency = "Eur"
            vPay.DocDate = Now
            vPay.DocRate = 0
            vPay.DocTypte = 0
            vPay.HandWritten = 0
            vPay.JournalRemarks = "Incoming - D10004"
            vPay.LocalCurrency = 0
            'vPay.Printed = 0
            vPay.Reference1 = 14
            vPay.Series = 0
            'vPay.SplitTransaction = 0
            vPay.TaxDate = Now
            vPay.TransferAccount = "10100"
            vPay.TransferDate = Now
            vPay.TransferSum = 0 '
            vPay.Invoices.AppliedFC = 0
            'vPay.Invoices.AppliedSys = ""
            'start
            'vPay.Invoices.Count = 1
            vPay.Invoices.DiscountPercent = 20
            vPay.Invoices.InstallmentId = 0
            'vPay.Invoices.LinkDate = CDate("31/12/2002")
            'vPay.Invoices.PaidSum = "d"
            'vPay.Invoices.UserFields = "ddd"
            'end
            vPay.Invoices.DocEntry = 1
            vPay.Invoices.DocLine = 0
            'vPay.Invoices.DocRate = 0
            vPay.Invoices.InvoiceType = BoRcptInvTypes.it_Invoice
            'vPay.Invoices.LineNum = 0
            vPay.Invoices.SumApplied = 5031.2
            vPay.Checks.AccounttNum = "384838"
            vPay.Checks.BankCode = "CB"
            vPay.Checks.Branch = "Branch"
            vPay.Checks.CheckNumber = 3838383
            vPay.Checks.CheckSum = 4031.2
            'vPay.Checks.Currency = "Eur"
            vPay.Checks.Details = "test1"
            vPay.Checks.DueDate = CDate("31/12/2002")
            ' vPay.Checks.LineNum = 0
            vPay.Checks.Trnsfrable = 0
            Call vPay.Checks.Add()
            Call vPay.Checks.SetCurrentLine(1)
            vPay.Checks.AccounttNum = "384838"
            vPay.Checks.BankCode = "CB"
            vPay.Checks.Branch = "Branch"
            vPay.Checks.CheckNumber = "3838383"
            vPay.Checks.CheckSum = 1000
            'vPay.Checks..Currency = "EUR"
            vPay.Checks.Details = "test2"
            vPay.Checks.DueDate = Now
            'vPay.Checks.LineNum = 1
            vPay.Checks.Trnsfrable = 0
            If (vPay.Add() <> 0) Then
                MsgBox("Failed to add a payment")
            End If
            'check for errors
            Call vCompany.GetLastError(nErr, errMsg)
            If (0 <> nErr) Then
                MsgBox("Found error:" + Str(nErr) + "," + errMsg)
            Else
                MsgBox("Succeed in payment.add")
            End If
            'disconnect the company object, and release resource
            Call vCompany.Disconnect()
            vCompany = Nothing
            Exit Sub
    ErrorHandler:
            MsgBox("Exception:" + Err.Description)
        End  Sub   
    It seem when i add record by use other object such as JournalEntries.It work!!!!!
    i need all of your suggestion.Anyone who have been found this error before can help me.
    Thank you so much
    Nuttaphon(Thailand)

    Hi
    Your question is not clear.. Are you talking about crystal reports results area ?  If it is not related to crystal, please mention the tool.
    Thanks,
    Sastry

  • C4180 error:the data area passed to a system call is too small

    C4180 Photosmart printer. Loaded official HP driver from the web site for this all in one.
    OS is windows 8.1 pro 32bit.
    After any print command , in my case a test print the following windows error.
    "The data area passed to a system call is too small".
    Removed driver and reinstalled, same problem.
    Anybody had the same problem, more to the point what is the cause.
    Thanks.

    Hi jongar47,
    Welcome to the HP Support Forums! I see when you attempt using a print command with your HP Photosmart C4180 you get a "The data area passed to a system call is too small" error. You have Windows 8.1, you updated the drivers for the PS C4180, and tried uninstalling and reinstalling the driver with no success.
    I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Does the PSDR find any problems with the software and drivers, any conflicts?
    Please let me know the outcome, I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • "The data area passed to a system call is too small." Windows 8

    I am not a developer - thus many comments do not make sense to me, as I'm just a heavy user. Today, about a year and half after beginning to use Windows 8, hyperlinks in my emails return the error "The data area passed to a system call is too small."
    Can you give a layperson (i.e. simple - is it fixable and can I fix it?) answer to this error? If I copy and paste the URL into my IE 10 browser, it works. However, this takes more time than I usually can afford given how often I use email links to continue
    my work.
    Here's a picture of the error message:
    OOPS, just got big RED message: Body text cannot contain images or links until we are able to verify your account.
    I seem to have one (logged in automatically as sunwalkermsdn).
    Thanks for any help to this newly appearing issue.
    (will I get an email if you post an answer? - due to same message above, I cannot enter my email address)

    This is a developer forum. We cannot help you to fix a web site, unless you own the web site in question and you can release a fix by yourself if you just need some advise on web development.
    Contact the web site's owner if you don't own the web site in question. 
    Visual C++ MVP

Maybe you are looking for

  • Server 2008R2 - Windows cannot log you on because your profile cannot be loaded

    Hi guys. I have a server SEXXX01 - Windows 2008 R2 OS. Im having major issues to login to this server. This was reveled when a person tried to login to the server and got the error "Cannot log you in, unable to load profile" What we did was to remove

  • User exit or BADI for Tcode ME51N

    Hi All, My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR. Is there any user exit or Badi for this requirement. Kindly send me. Re

  • Report Painter/Report Writer - Documentation

    Hi All, Can any one send me documentation on Report Painter. I have requirements to created some reports in my project. Please send the documentation to my email id [email protected] Bye, Ramesh

  • Need Information on PeopleSoft Licence

    Dear Friends, My Client has taken licence for PeopleTools 8.51 and Campus Solutions 9.0. The licence is valid for next 5 years He is Interested in upgrading the tools. Can he upgrade to PeopleSoft 8.52 with the same licence or he has to buy another l

  • How to call an web dynpro abap application with an particular theme

    Dear friends, i have created one web dynpro abap application. i created one theme XYZ in portal with required font size. when i applied this theme on portal all web dynpro application use this theme. i want to use current theme for one application no