System.OutOfMemoryException when using CrystalReport with VS 2010
hey everybody...
i am in problem from the few days...
i have upgraded my "Web Report Project" that uses Crystal Report from dot net framework 3.5 to 4.0 with 32bit. I frequently encounter System.OutOfMemoryException when viewing large reports (when report run over 500 pages) however this was not the
issue on framework 3.5.
i have googled a lot and applied almost all the solutions that says
a) Crystal Report Service pack b) using Garbage Collection in unload event c)dispose report and crystal report viewer.
i have observed following few things in the task manager
1)process "WebDev.WebServer40.exe" consumes almost 50% of the Physical Memory when the IE runs
2)iexplorer consumes memory in hundreds of MBs.
i am using 32 bit OS with 4GB RAM
Any Suggestions. i am running with short of time.
@Asif48,
Like pvdg42 mentioned your issue is not related to this forum. .NET Setup forum is about the installation of .NET, please reopen a new post on the forum he mentioned.
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
How to hide system tables when using the Oracle SQL Developer?
Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet -
When using iPhone with Ford Automobiles' SYNC, the connection drops each time the ignition is shut off. To restore, you must turn off the bluetooth on iPhone, then restart each time. Any suggestions?
There is an update avaialbe for Ford systems to correct bluetooth problems. You need to update your system.
-
Only 274 mails are coming when using pop3 with java mail
Only 274 mails are coming from GMAIL when using pop3 with java mail. but there are more than 3000 mails.
I'm not getting the reason, code is given below:
public static void main(String[] args) {
// SUBSTITUTE YOUR ISP's POP3 SERVER HERE!!!
// String host = "pop.bizmail.yahoo.com";
// final String user = "[email protected]";
// final String password = "xxx";
String host = "pop.gmail.com";
final String user = "gauravjlj";
final String password = "xxx";
String subjectSubstringToSearch = "Test E-Mail through Java";
try {
Properties prop = new Properties();
prop.setProperty("mail.pop3.socketFactory.class",
"javax.net.ssl.SSLSocketFactory");
prop.setProperty("mail.pop3.socketFactory.fallback", "false");
prop.setProperty("mail.pop3.port", "995");
prop.setProperty("mail.pop3.socketFactory.port", "995");
prop.put("mail.pop3.host", host);
prop.put("mail.store.protocol", "pop3");
Session session = Session.getDefaultInstance(prop);
Store store = session.getStore();
System.out.println("your ID is : "+ user);
System.out.println("Connecting...");
store.connect(host, user, password);
System.out.println("Connected...");
// Get "INBOX"
Folder fldr = store.getFolder("INBOX");
fldr.open(Folder.READ_ONLY);
int count = fldr.getMessageCount();
System.out.println(count + " total messages");
// Message numebers start at 1
for(int i = 1; i <= count; i++) {
// Get a message by its sequence number
Message m = fldr.getMessage(i);
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
// Search for e-mails by some subject substring
String pattern = subjectSubstringToSearch;
SubjectTerm st = new SubjectTerm(pattern);
// Get some message references
Message [] found = fldr.search(st);
System.out.println(found.length +
" messages matched Subject pattern \"" +
pattern + "\"");
for (int i = 0; i < found.length; i++) {
Message m = found;
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
Object o = m.getContent();
if (o instanceof String) {
System.out.println("**This is a String Message**");
System.out.println((String)o);
else if (o instanceof Multipart) {
System.out.print("**This is a Multipart Message. ");
Multipart mp = (Multipart)o;
int count3 = mp.getCount();
System.out.println("It has " + count3 +
" BodyParts in it**");
for (int j = 0; j < count3; j++) {
// Part are numbered starting at 0
BodyPart b = mp.getBodyPart(j);
String mimeType2 = b.getContentType();
System.out.println( "BodyPart " + (j + 1) +
" is of MimeType " + mimeType);
Object o2 = b.getContent();
if (o2 instanceof String) {
System.out.println("**This is a String BodyPart**");
System.out.println((String)o2);
else if (o2 instanceof Multipart) {
System.out.print(
"**This BodyPart is a nested Multipart. ");
Multipart mp2 = (Multipart)o2;
int count2 = mp2.getCount();
System.out.println("It has " + count2 +
"further BodyParts in it**");
else if (o2 instanceof InputStream) {
System.out.println(
"**This is an InputStream BodyPart**");
} //End of for
else if (o instanceof InputStream) {
System.out.println("**This is an InputStream message**");
InputStream is = (InputStream)o;
// Assumes character content (not binary images)
int c;
while ((c = is.read()) != -1) {
System.out.write(c);
// Uncomment to set "delete" flag on the message
//m.setFlag(Flags.Flag.DELETED,true);
} //End of for
// "true" actually deletes flagged messages from folder
fldr.close(true);
store.close();
catch (MessagingException mex) {
// Prints all nested (chained) exceptions as well
mex.printStackTrace();
catch (IOException ioex) {
ioex.printStackTrace();
Please tell me.
ThanksIs it possible that GMail only allows access to untagged emails via POP3? Or only to emails from the last x days?
POP3 is the older email retrieval protocol (IMAP4 is the more current one) and only has very limited support for folders (or anything but a single inbox, really). It's quite common that POP3 only allows access to a subset of all emails stored by a provider. -
Best practice when using Tangosol with an app server
Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/PerHi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per -
Display "blank-out" when using Maya with a GF 7800?
I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce. -
How do I stop system sounds when using AirPlay on my MacBook Pro?
Hi all,
Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
Many thanks in advance, Jon.Open AirPort Utility located in HD > Applications > Utilities
From the AirPort Utility menu bar click AirPort Utility > Preferences
Deselect: Monitor AirPort base stations for problems -
When using Numbers with iCloud, a new version is created every time I make a change. I do not want all these revised documents. When I change a document, I commit to that change. How do I shut off this multiple-revision feature of Numbers being pushed to iCloud.
Also....
When using Numbers with iCloud, a new version of the spreadsheet is created even when no revisions have been made. Why is this, and how do I make it stop?
My files are growing.Your plugins list shows outdated plugin(s) with known security and stability risks.
# Java Plug-in 1.5.0_11 for Netscape Navigator (DLL Helper)
# Adobe Shockwave for Director Netscape plug-in, version 11.0
Update the [[Java]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
See
http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
http://www.adobe.com/shockwave/welcome/ -
When using pdfFactory with Firefox, why are the colors on the pdf not correct?
The colors are vastly different when using pdf Factory with Firefox. When using pdfFactory with IE, they are both the same.
There doesn't seem to be a one-size-fits-all answer, because what works for one printer doesn't necessarily work for another, and I don't have your printer so I can't advise on specifics...
However, perhaps we can discover a set of settings that will work...
If you File - Print, choose Photoshop Manages Colors, in the Printer Profile section do you see profiles specific to your printer (e.g., with the name Kodak in them)?
If so, choose one of them that seems appropriate given the paper you're using.
If not, try choosing sRGB IEC61966-2.1.
Now, before you continue, press the [Print Settings...] button. This brings up the printer driver dialog. You may have to go through [Advanced] buttons or whatever, but what you're looking to do here is to disable the printer driver's color management logic. In other words, if you can find a color-management / ICC profile handling section, set it to "no color management" or equivalent. OK back out to Photoshop's print dialog, then press [Print].
The key here is that if Photoshop manages the color transforms, the printer driver should not be set to do so - or vice versa.
If you're presented with the printer driver's dialog again, double check that the settings you chose above are still set, for good measure, and try a test print.
-Noel -
How to store a layout, when using CL_SALV_TREE with a container?
Hello,
I'd like to use an object of type CL_SALV_TREE, that is placed on a custom container (and therefore not displayed in fullscreen).
But how do I get the functionality to store a layout, when using CL_SALV_TREE not in fullscreen mode? If you use it in fullscreen mode, you just have to define the function code in your gui status and everything is ok.
But since I want to place my CL_SALV_TREE on a custom container, that method does not work. If I call <my_salv_tree>->get_functions( ) it returns a table, that holds just six entries. So, the appropiate function for storing a layout does not seem to be in the default set of functions, when using CL_SALV_TREE with a custom container. But how do I activate this function?
I already call the functions get_layout() and set_key() - so that shouldn't be the problem. Or is just not possible to use CL_SALV_TREE on a custom container and have the possibility to store layouts?
Kind regards, LarsHello,
I'd like to use an object of type CL_SALV_TREE, that is placed on a custom container (and therefore not displayed in fullscreen).
But how do I get the functionality to store a layout, when using CL_SALV_TREE not in fullscreen mode? If you use it in fullscreen mode, you just have to define the function code in your gui status and everything is ok.
But since I want to place my CL_SALV_TREE on a custom container, that method does not work. If I call <my_salv_tree>->get_functions( ) it returns a table, that holds just six entries. So, the appropiate function for storing a layout does not seem to be in the default set of functions, when using CL_SALV_TREE with a custom container. But how do I activate this function?
I already call the functions get_layout() and set_key() - so that shouldn't be the problem. Or is just not possible to use CL_SALV_TREE on a custom container and have the possibility to store layouts?
Kind regards, Lars -
There is no way to see who is on line when using facebook with iPad 2
There is no way to see who is on line when using facebook with iPad 2 why is that?
I'm guessing you mean for FB Chat? Try the app Friendly.
-
I just upgraded to iOS7 and started using icloud with Outlook 2010. I dealt with switching over to only using icloud for my calendar, but now my calendar reminders are only randomly popping up which is very frustrating. They show up on my phone however. And under my calendar on my main page it doesn't show any appointments coming up. Any suggestions on a fix?
Hey Csound1,
Looks like we found a solution, it's Mickey Mouse but it works. After talking to two Apple Senior Advisors, this is the fix they came up with:
The first advisor after exploring it for awhile, came to the conclusion the way to get my calendars back local On my Mac with the alerts as I had then was to import the saved .ics files with my my 'dangerous email alerts' being removed then me manually re-adding them. I said that was a no go.
The second advisor, after speaking with me for awhile and trying a few things that we'd tried before said he'd do some work on his end and call me back. A couple of hours later he phoned back with a fix that I guess will have to do, his solution:
I had to go into Calendar-preferencs-accounts and create a Gmail calendar, quit and restart Calendar, I created a calendar in the gMail account. Then I was given the option in Calendar under File-New Calendar to create On my Mac local calendars. Next was to create local calendars with the same names as my iCloud calendars. Now I had to un-check all calendars but one, put Calendar in month view, command-click all the events for the given calendar and drag them to the new local calendar of the same name. I then had to repeat this for each of the calendars and for all 12 months of the year.
I'm not done yet but it seems to be working. As I said Mickey Mouse but doing the job. It seems creating another online calendar account was the only way to get the local On my Mac option, active again. What a pain in the a** this has been, I will repeat it again
iCloud is EVIL. -
s there a way that when using airplay with power point the ATV does not sleep/screen saver frequently???
I have done this for several Titles, using Photoshop and a Layer Mask, that gets "erased," revealing the letters. My Titles were of "handwriting with chalk" on a blackboard, so I could keep the edge of that Layer Mask, looking more like the "chalk." Photoshop also makes it easy to output Layer Comps for each "step" in the handwriting process. IIRC, I did about 5 Frames per Layer Comp on Import, but do not recall if I used an extremely short Cross-Dissolve Transition between those - I intened to do so, but just do not remember if I liked that, or went with just the Still Images? Will try to find that animation, and maybe create a full tutorial of the process. In my case, I also added an SFX of chalk on a chalkboard.
If you have Photoshop, it's really quite easy to pull off.
Now, I do not know if Photoshop Elements has Layer Masks yet, which make it so very easy to accomplish. One could do it backward, where the Text Layer gets Erased, and then one would have their full Image as the last in the sequence, and then the next would have a little bit of the Text removed, then a bit more, then a bit more - going backward, until the "writing surface" is clean. One could also do this with a Transparent Background, so that one saw the Video below, and no actual "writing surface" visible.
Good luck,
Hunt -
I am using Chrome to write this and no crashes. I have defragged with the system defrager and Defragler both. I bought new memory but this issue happened a couple days after install around the time of some microsoft updates 01/09/13. I have run Memtest and a hard drive test as well, done a power cycle and run a disk cleaner. This only happens when using Firefox.
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter -
Application crashes when using JNI with Jdk 1,2, 1.3 and 1.4
Hi!
I have this application that has a GUI written in Java and a file parser written in C. JNI is used to connect these parts together. The problem is that the application only works when I am using jdk 1.1.8 but not when using jdk1.2, jdk1.3 or jdk1.4. I am running the application on a Solaris 8 machine.
I have not written the application myself but I am going to be working with it from now on. But I have today little knowledge with JNI and I have tried different approaches to solve the problem. For example I have tried to used DDD together with GDB to find out what the problem is but with no luck. When I run the application using jdk1.4 I get the following error when the JVM crashes:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 10 occurred at PC=0xFA023164
Function=Java_Bitmap_setDebug+0x1C
Library=/usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Current Java thread:
at Bitmap.setDebug(Native Method)
at DisplayPanel.loadFile(DisplayPanel.java:396)
at MicPlot.loadFile(MicPlot.java:1452)
at MicPlot.loadFile(MicPlot.java:1441)
at MicPlot.miOpen_Action(MicPlot.java:1267)
at MicPlot$SymAction.actionPerformed(MicPlot.java:1184)
at java.awt.MenuItem.processActionEvent(MenuItem.java:588)
at java.awt.MenuItem.processEvent(MenuItem.java:548)
at java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:285)
at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:273)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:452)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Dynamic libraries:
0x10000 /opt/java/jdk1.4/bin/java
0xff360000 /usr/lib/libthread.so.1
0xff3a0000 /usr/lib/libdl.so.1
0xff280000 /usr/lib/libc.so.1
0xff270000 /usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1
0xfe000000 /opt/java/j2sdk1.4.1/jre/lib/sparc/client/libjvm.so
0xff220000 /usr/lib/libCrun.so.1
0xff200000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff1d0000 /usr/lib/libm.so.1
0xff250000 /usr/lib/libw.so.1
0xff0e0000 /usr/lib/libmp.so.2
0xff0b0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/native_threads/libhpi.so
0xff080000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libverify.so
0xff030000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libjava.so
0xfe7e0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libzip.so
0xfe4e0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xedd00000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libawt.so
0xfc480000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libmlib_image.so
0xfc410000 /opt/java/j2sdk1.4.1/jre/lib/sparc/motif21/libmawt.so
0xeda80000 /usr/dt/lib/libXm.so.4
0xfa090000 /usr/openwin/lib/libXt.so.4
0xfa3d0000 /usr/openwin/lib/libXext.so.0
0xfc7e0000 /usr/openwin/lib/libXtst.so.1
0xed980000 /usr/openwin/lib/libX11.so.4
0xfa2a0000 /usr/openwin/lib/libdps.so.5
0xfa3b0000 /usr/openwin/lib/libSM.so.6
0xfa1d0000 /usr/openwin/lib/libICE.so.6
0xed880000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libfontmanager.so
0xfa390000 /usr/openwin/lib/locale/common/xlibi18n.so.2
0xfa1b0000 /usr/openwin/lib/locale/iso8859-1/xomEuro.so.2
0xfa190000 /usr/lib//liblayout.so
0xfa050000 /usr/openwin/lib/locale/common/ximlocal.so.2
0xfa010000 /usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Local Time = Thu Oct 3 13:32:47 2002
Elapsed Time = 35
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1-beta-b14 mixed mode)
# An error report file has been saved as hs_err_pid27692.log.
# Please refer to the file for further information.
Abort
From this information I think that the problem should be in the native method setDebug. But I have tried to set a breakpoint at the beginning of that function in the C part but with no luck. The application crashes before it reaches that position in the C file.
What could possibly go wrong between the setDebug function in the C part and the function call in the Java part?
When using GDB, GDB cannot figure out what is wrong it just returns a hex address, no function name.
I would really appreciate some help. I have tried everything that I can come up with!
Best regards
LarsI have figured out that the application fails on its first call to the native methods.
So I have this Bitmap class that contains all the native calls and it is defined shortly as follow:
public class Bitmap {
static {
System.loadLibrary("BitmapImpl");
native void setDebug(int debuglevel, int statistics);
There are many more native methods defined in Bitmap, but I only show the setDebug method because that is the first one that is executed and also the one that immediately fails.
My setDebug C function is defined as follow in BitmapImpl.c
#include <time.h>
#include <stdio.h>
#include <limits.h>
#include <fcntl.h>
#include <jni.h>
#include <math.h>
#include <errno.h>
#include "Bitmap.h"
#include "data.h"
jint debug = 0;
jint statistics = 1;
JNIEXPORT void JNICALL Java_Bitmap_setDebug
(JNIEnv *jenv, jobject jo, jint d, jint s)
debug = d;
statistics = s;
My libBitmapImpl.so file is compiled using the following Makefile and using GNU gcc:
JAVAPATH=$(JAVAINCLUDEPATH)
LMACRO=-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSOLARIS
CSOURCE=BitmapImpl.c
all:
gcc -O3 -G $(LMACRO) -I$(JAVAPATH) -I$(JAVAPATH)/solaris \
$(CSOURCE) -o libBitmapImpl.so
It is still a total mystory why the application fails. I have tried it on a RedHat Linux machine and there it works fine. But not on Solaris. Only if I use the jdk1.1.8 but not a later one.
Would really appreiciate some help!
Best regards
Lars
Maybe you are looking for
-
A problem with delays in timed loops and DAQ
I am programming a simulation for nuclear rewetting for a visitor centre at my company in Switzerland. It involves heating a "fuel rod" and then filling the chamber with water. The pump automatically starts once the rod core reaches 750C. After this,
-
IChat Video Not Working - Becoming Desparate!
Hi, I have iChat 5.0.1 running on OS X 10.6.2 I have no problem getting onto iChat but I am unable to connect with video. If I initiate the video chat, it seems like it just times out. However, if I receive the invite, I get the following error messa
-
I want to have all the facilities of my Ipad obtained for my e mail address, available for another e mail address belonging to my wife. Anyone know how I set this up please? I am a new user and long in the tooth so any help would be much appreciated.
-
I have imported an audio (mp3) to an object. The audio is visible in the time line and plays using the play button in timeline. There is a "click to continue" button that must be clicked for the project to continue playing, once clicked the audio (mp
-
Possible to record 720p at 60 fps with Touch 4G?
I realize I'm asking a lot from this little device, but I was wondering if it is even possible to record at 60 fps. I believe the specs list recording at 30 fps, but I wondered if it was possible to change this. Many thanks in advance. jjw