System Overview hangs

I have one macbook running ARD 3.4 client and OS X 10.5.8 that I can "Control" and "Observe" but when I try to collect the "System Overview" it just hangs. This function works well on all other computers (about 50 of them) but not on this one. I have checked all the settings under Sharing, etc. The System Overview task (with "all fields" and "rebuild data for report") status normally starts with "waiting" then "collecting report data" then "tranferring" and finally "successful" after which the report info is displayed. The process is usually done in about 20 seconds or less. On this problem macbook, it runs for a while and then comes back "offline" or just hangs at the "collecting report data" stage but I can still observe or control that laptop. What can I do to get the System Overview report to work?

Hi,
Pls Click the Personal Setting Tab in the ME21N/ME22N/ME23N screen..
and Restrict the "Selection Period for My Docs" to 1 day or One Week and Check..
Probably the Default right now is No Restrictions or One year...
Thx
Raju

Similar Messages

  • USB modem and Internet Sharing causes system to hang.

    First my setup. I have a Mac mini (early 2009) running 10.7.2 connected to the Internet using a Sony Ericsson W910 as a USB modem. I am using Internet sharing via Ethernet to a 1st generation (n) AirPort Extreme to give Wi-Fi to other devices (iPhone, Xbox 360, PS3 etc).
    Now the problem: When Internet Sharing is on regardless of what interfaces are used (Ethernet, Wi-Fi, Bluetooth PAN etc) eventually—that word is key—my system will hang. Internet will be unavailable to every device and my Mac itself (but they will still be connected to Wi-Fi) and any app that is running willbeachball. Any app I launch—or try to—will also beachball. I've tried leaving it to see if it will resolve itself —even overnight—but it always requires a hard reset.
    The eventually part. I haven't figured out what causes this but I have an idea which I'll explain later. The times this happens is totally random. It has gone days with  no problems and other times has happened minutes apart. Usually it's about every 12-24 hours.
    It's definitely Internet Sharing which is causing this because when I turn it off I don't have any problems. I've tried every configuration. Only sharing via my mini's Wi-Fi or Ethernet, leaving the AirPort out etc. As soon as I turn on Internet Sharing I've started a countdown to a hang.
    On inspecting the Console the last messages before a hang without fail are always:
    12/12/2011 06:31:07.000 kernel: 80       80 AppleUSBCDCECMData: getOutputBuffer - Output buffer pool empty
    12/12/2011 06:31:07.000 kernel: 80       66 AppleUSBCDCECMData: USBTransmitPacket - Output buffer unavailable
    12/12/2011 06:58:58.312 com.apple.usbmuxd: _handle_timer Fish out of water!!!
    Repeated hundreds of times. Quick Googling indicates that AppleUSBCDCECMData is a USB driver. Apparently I have version 4.1.15 which appears to be the latest.
    I'm aware this is a rare configuration but I believe it affects every USB not just this particular phone.
    Is anybody else experiencing this or knows a way to fix it?
    Thanks.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

  • Right-click, drop-down menus in Firefox 15 cause entire Mac OS 10.7.4 system to hang, forcing manual reboot.

    I bought a new MacBook Pro.
    I am running Mac OS 10.7.4 with Firefox 15. Every time I right click or try to use a drop-down menu in Firefox, it causes the entire system to hang, forcing a manual reboot.
    No crash reports are available as the Firefox does not actually crash.
    I have tried
    1.) Starting Firefox in safe mode
    2.) Disabling all the add-ons
    3.) Resetting Firefox
    4.) Removing and re-installing Firefox
    5.) Disabling hardware acceleration
    The problem still occurs.
    This is critical a critical issue as I have been using Firefox's Zotero plugin to write my PhD dissertation which is about 50% complete and now I cannot use Firefox or the Zotero plugin and have about 800 references I do not want to have to manually re-enter!! Also it is preventing me from continuing work on the dissertation as I am unable to insert references, and I have submit this thing by March!!!!

    Ok, further developments. Still can't get Firefox to work; it makes Lion hang and I have to force a reboot. I tried using terminal to open FF's profile manager, delete my old profile and make a new one. Same problem.
    I tried making a new user account in Mac OS, and doing another fresh install of Firefox. It worked! I was able to use drop down menus and right click without crashing the system!
    However, as soon as I installed the Zotero plugin... the same issue started occurring again.
    Dear programmers, please help me. It will literally take me weeks of work to re-do all of my citations using a different software or manually. There must be a way to fix this problem!

  • Unable to create a Purcahse order from Proman-System is hanging

    Hi All,
    I am unable to create a Purcahse order from Purcahse Requisition from Proman.
    When iam executing the Function, convert Purchase Requisition to PO, after giving the required inputs like Vendor,Purcahse Org,Pur Group, Company, system giving the information that, Purcahse order is created with number and ask to proceed further.
    When i click, system is hanging and unable to proceed further and when i check the PO, There is no data available in the PO's/
    Regards,
    N.Raju

    Hi Nitin,
    Iam getting the PO Number is generated information with Number. But that number is not available in the system.
    Any clue for this.
    Regards,
    N.Raju

  • System freezes(Hangs) if I use Print Button

    Hello,
    I created few dashboards using SAP xMII.Once I logon to the application, if I press Print button to take the print of the Dashboard screen, System Freezes(Hangs).
    Than I have to use Task Manager and kill SAP xMII session thread to close the application.
    Did any body came across similar kind of experience or knows about the problem?
    Help will be highly appreciated.
    Regards
    Raman

    Raman
    R using window.print() function for this or wat?
    One important thing to remember
    <b>A printer friendly page is really just a page with text, no images, graphics, navigation or advertising.
    </b>
    Regards
    Som

  • HT1338 My system preference hang after i click desktop and screen saver app.

    When ever i try to change my wall paper or click on my desktop and screen saver app the system preference hang..
    Any one know how to fix that beside format the whole system?
    Thanks in Adv.

    Welcome to the Apple Support Communities
    Try to delete the Desktop settings file. First, open Finder, select Go menu > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist", and restart. Finally, you should be able to go to Desktop and Screen Saver on System Preferences

  • System Preferences Hanging

    I upgraded my First Gen Macbook to Snow Leopard when it came out. Just recently however, I have started having a problem with system preferences. The first time I open system preferences, it hangs, stalls, and crashes. Once I force quit it, I can launch it normally. So recap:
    Launch System Preferences: Hang, Force Quit
    Re-Launch System Preferences: Open immediately
    A minor annoyance but still an annoyance

    You are not alone friend, I have a 1st gen Macbook Pro, fresh install of Snow Leopard, new user account, NO migration, all updated, and all voodoo done as well (repair permissions, chkdsk, blah blah blah). I have to launch System Preference, watch it hang, force quit, and relaunch successfully. Works that way EVERY time. If I wait too long, I can't open it. Now I open it and just leave it open all day. If I didn't change so many settings so often, I wouldn't care. This entire experience of upgrading to Snow Leopard has sucked. Shame on you Apple.

  • System Preferences hangs with Mountain Lion

    Various parts of system preferences hang under Mountain Lion.  Prior to upgrade there was no problem. Any ideas?

    I am still having this problem as well.  Multiple panes will fail to launch.  A reinstallation of ML failed to fix this.  I even did a fresh reinstall, manually copying over my Documents, Music, Pictures, and other essential files to a backup drive beforehand.  Almost all System Preferences fail to launch.  A list of those that fail:
    Desktop & Screensaver
    Security & Privacy
    Notifications
    iCloud
    Mail, Contacts, & Calendars
    Date & Time
    Software Update (The only one that seems to extend beyond the preference pane.  Software update will not launch, even though I know there are iPhoto and iTunes updates to be downlaoded.)
    Dictation & Speech
    Time Machine (I really, really, really, really, really want this one to work!)
    Startup Disk
    Third-party:
    Glimmer Blocker (I have let the developer know.  There is an update, it does not seem to be working at this time.)

  • System Overview empty in solution monitoring screen

    Hi,
    I am in the process of setting up monitoring for R/3 system from Solution Manager. Defined all required entries in SMSY. In the section Solution Monitoring -> System Monitor/Administration, the system overview is showing empty.... I mean SID names are not showing. Any idea what could be wrong ?
    Thanks

    Hi Aravind,
    The only cause to this problem is your igs is not working and could be one more reason i.e you have not activated the services ( html, http,bsp and others ) in transaction SICF
    you try this way and to activate the services follow the instruction from SPRO
    Regards
    S.M.Ahmed
    Intelligroup Inc

  • Display on Qosmio F60-10U Turns Mozaic and System Getting Hang

    From The Day I purchased F60-10U; i am facing thins problem. My display occasionally Turns into Mozaic and same time System Getting Hang. only thing i can do is restart with power button.
    i had given to service center; they told that its because of virus and need to be formatted. as i was 100% sure that its not because of virus; i took back from there.
    I had tried below:
    1. Update Display Driver
    2. Downgrade Display Driver
    3. Factory reset
    4. Scan for virus with various engines
    5. Updated All Drivers
    Nothing works...
    Anybody else has got same problem?
    Hope that i can get some fix for this.
    Here is a Picture of Display when its Happens.
    Link:[http://www.glowfoto.com/static_image/11-120740L/7879/jpg/09/2010/img4/glowfoto]
    Rgrds,
    Chintan

    I dont think this issue has anything to do with virus and I believe graphic card is defective. All you have done is right and after factory image installation virus will be killed and everything should work well.
    Contact service again, let them test with factory settings and if the same will happen again I presume they will exchange motherboard.

  • Solution Monitoring System Overview

    There are non-production systems showing in the system overview in Solution Monitoring.  They are dev and QA systems that are in the logical component.  How do I removc them?

    Hello Jerry,
    Solution Monitoring overview just displays the the solutions and the number of systems rated green, yellow, red, etc for
    Earlywatch Reports, System Monitoring, Business Process Monitoring, and Open Tasks.
    As you can see Solution Monitoring is based on Solution, so whatever systems you have included in that solution will be included in the solution. The overview is an overview of the solutions in Solutin Monitoring. This is why it is called Solution Monitoring.
    If you are talking about System Monitoring, or BPM or EWA, etc, then if you don't want non-production systems included, then they should not be included in the solution, or the status of those systems in the solution should not be "Put in Solution".
    Perhaps you have not set up your solutions in the best way?
    Regards,
    Paul

  • TS3742 I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto.

    I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto. I have to power off my system to get it running again. Any suggestions on what I can do  to address this situation.

    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Let us know if these  procedures don't solve the problems.
    Hope this helps

  • System Preferences hangs at "Loading Print & Fax..."

    Hi,
    I tried to load a Canon printer driver for the ir1023. After the install it required a restart. The Mac Pro never fully turned off, so I was stuck having to do a manual shut down with the power button. I am sure this messed everything up.
    When I logged back on System Preferences hangs at "Loading Print & Fax..." when I click the icon. So I deleted the printing preferences, from my preferences folder and still nothing.
    I ran the canon installer and that ran successfully, but did not remedy the problem. No Mac programs will print, Photoshop will not launch and Text Edit won't quit.
    I ran Disk permissions from the Leopard disk, still no improvement.
    Any ideas on how to fix my printing woes without a reinstall?
    And I was having some hardware issues with my Time Machine drive - so I had no backup to fall back on.
    Thanks!

    I would run the UFR2 driver installer again, but when it shows Easy Install at the Installation Type pane, change the menu to Uninstall. This should remove all the UFR2 files, most of which are copied to ./Library/Printers/Canon/UFR2.
    With the Canon files removed, try to open the Print & Fax pane again. If it still fails to load, you could try opening the CUPS web page (http://127.0.0.1:631). From here you can select the printer list and job list and possibly remove any existing printers or jobs that are in the system. Ideally we would like to reset the printing system, but I don't think we can do this from the web page or from Terminal - we need the GUI of Print & Fax.
    Will do some more reading and get back to you....
    PaHu

  • Safari's mail link and mail page options cause system wide hang

    I am having a very odd and serious problem with mail/safari in the 10.4.6 update
    When I select mail contents of this page or mail link to this page from the file menu and mail is NOT open it causes the entire system to hang and the only option is to reboot
    I tried to mail a page when mail was open and I didn't have any trouble
    I have seen several posts that are similar but don't involve safari's mail link issue
    If someone knows of a more appropriate area please direct me there
    Thanks
    Mac Mini   Mac OS X (10.4.6)  

    I usually don't use this feature with the Mail.app quit but it shouldn't make any difference.
    As a test, I quit the Mail.app and used Mail Contents of This Page from Safari. The Mail.app launched without any problems and a new Mail.app message opened with the contents of the selected web page copied to the message.
    As a first step, I suggest Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.
    Did you check the hard drive for any directory problems with Disk First Aid repair via Disk Utility when booted from your Tiger install disc before installing the 10.4.6 update and did you quit all running applications before the install?

  • Nothing is displayed in System Overview.

    Hi,
    I have taken over a Solution Manager and will set up system monitoring. When selecting Solution Monitoring > System Monitoring no system overview is displayed. Only this text:
    "Action canceled
    Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable."
    It looks like the system overview should be displayed in web, but that is not possible for the moment. EWAs are displayed, by the way. Also when selecting Alert Overview (button) a DEV system is displayed with a few alerts).
    I assume there are some settings that are not correctly configured. Does anyone know more about this?
    Thanks!
    Best Regards,
    Kjell Aarhus

    OK

Maybe you are looking for