System parameter selection for iView

Hi Expert,
While I'm creating iView in BEx Web Applications Parameters
In System parameter i am selection the "SAP_BW" the iVew is not working it showing me error "500 Internal Server Error"
but, if i am selecting the "Local system" the iVew is working properly.
Tell me how rectify that error.
Thanks and Regards
Lalit Kumar

Dear Lalit,
While iView creation if you are selecting the required version of BEx Web: BEx Web Application iView (SAP BW 3.x format) then the System Alias needs to be provided as 'SAP_BW'or the one which you have created. If the BEx Web Application iView (SAP NetWeaver 7.0 format) is used then we have to use "Local system" as the system property value.
In your case I think you are using the SAP NetWeaver 7.0 format for the BEx Web Application iView and thus you need to use "Local system" and if you want to use 'SAP_BW' as system alias then you should use the SAP BW 3.x format for the iview.
For more information you ca refer this [link|http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/content.htm].
Hope this helps!
Regards,
Samir

Similar Messages

No active system to select for new solution?

Hi!
I am creating a new solution at tcode dswp(solution_manager).
Per the doc, I should be able to select the active systems for this new solution to monitor.
But I cannot see any active systemsthere.
Do I need to register the active satellite systems
somewhere so that I can include them in the newsolution?
I did it in the SMSY. Any more places?
Please help ASAP. Thanks!

Hi Jason:
To accomplish what you are looking for you need to create 3 new Logical Components one for each individual SAP system you are trying to add to the Solution.
To create new Logical Components, proceed as follows:
In Tx SMSY click "System Groups and Logical Components"
1) Expand "Logical Components"
2) Expand the component you want to add a new Logical Component to (R3, BW, WAS..)
3) Right click and select "Create New Logical Component"
4) Now fill every option in the Create New Component Dialog box, try to use "Z" as the first character to follow SAP naming conventions.
5) Once created, you can add the instance in the new Logical Component and then, add the Logical Component to your Solution Landscape (the steps I mention in the thread above)
Also, you can remove unused system roles, like QA, DEV or PRD from the new logical component; to do that, proceed as follows:
1) In the "Current System Assignments", select button "System Roles"
2) then remove unused roles from the dialog box and save.
That's all!!!
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
GAZUM Technologies S.A.
Consulting Services and Software Solutions
http://www.gazum.com
...download FREE Marketplace Manager at: http://www.gazum.com/products

How to set the parameter selection *optional* for each subreport?

Hi,
I am using Crystal Reprots 11.
I create 10 subreports, and each subreport contains a Parameters Field.
The 10 subreports are put in 10 footer sections in increasing order, i.e. subreport1, subreport2, subreport3, ..., subreport10.
When I use "Print Preview" to take a look at the whole report, CR prompts a "Edit Values" window for selecting parameter values for all 10 subreports.
For example, if I only select parameter values for subreport1 and click "OK", 9 error messages on the "Edit Values" window come out above the selection list box of every other subreports (i.e. subreport2 ~ subreport10) showing that: 'The value is not valid'.
Sometimes, I just want to review some specific subreports but not all.
How should I do to set the parameter selection optional (not mandatory) for each subreport?
Thank you in adavance.
Edited by: Holdup on Feb 17, 2012 3:44 PM

Hi,
Here's how you can make the prompts optional (Assuming you're using CR 2008 or higher):
1) Go into each subreport
2) You should see the parameter in the Field Explorer. Right-click the name and select Edit > Look for an option called 'Optional Prompt'. Set it to true
3) If you have a record selection in the subreport, then you need to modify the selection formula to something like this:
if not(hasvalue({?Parameter_Name})) then True else = {?Parameter_Name}
Hope this helps!
-Abhilash

Ssrs 2008 'select all' option to be selected for a parameter

In a new ssrs 2008 report, the problem is all reports are not selected from the parameter called 'report' when the report runs automatically. When the report executes, there is nothing displayed in the parameter selection dropdown box. The user
has to click the down arrow to select which reports they want to execute.
Here is the siutation for the ssrs 2008 report:
In a new SSRS 2008 report, I want to be able to allow the user to select which report they would like to see generated by selecting the report name from a dropdown list. This is a multi-valued parameter and the parameter name is called 'report'. I
would like the default value to be for all 5 reports to be selected.
All 5 reports will be on the 'main' report. There will be no subreports. Each report will have its own unique matrix and the matrix will be visibile based upon what is selected in the parameter called 'report'.
My question is how can I make the 'default' value for the parameter called 'report' have all the reports selected?
Normally to get all multivalued parameter values selected you create a dataset and run a query against a table. However in this case, there is no table to query. The user just selects what report(s) they want executed.
Here is the code that is used:
1.Right-click the multiple parameter ‘repot’ to open the Properties dialog box.
2.Specify the values below in the Available values:
Label: report1
Value: report1
Label: report2
Value: report2
Label: report3
Value: report3
Label: report4
Value: report4
Label: report5
Value: report5
3.Specify the values below as the Default Values:
report1   report2   report3   report4   report5
4.Right-click the ‘report1’ to open the Tablix Properties dialog box.
5.Select Visibility in the left pane, type the expression below in the “Show or hide based on an expression” textbox:
=iif(InStr(join(Parameters!report.Value,","),"report1")>0,false,true)
6.Use the expressions below to control the visibility of the ‘report2’, ‘report3’, ‘report4’, ’report5’:
=iif(InStr(join(Parameters!report.Value,","),"report2")>0,false,true)
=iif(InStr(join(Parameters!report.Value,","),"report3")>0,false,true)
=iif(InStr(join(Parameters!report.Value,","),"report4")>0,false,true)
=iif(InStr(join(Parameters!report.Value,","),"report5")>0,false,true)
Thus can you tell me how all values from the 'report' parameter can be selected automatically when the ssrs report is executed?

Pass default value as below and see
=Split("Report1,Report2,Report3,Report4,Report5",",")
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Set parameter id for select-options to fill more than one value

FROM MY CUSTOM PROGRAM I AM CALLING A TRANSACTION CODE. IN MY REPORT I WANT TO SELECT MORE THAN ONE RECORD AND TO CALL THE TRANSACTION BY PASSING THE SELECTED VALUES TO THE SELECT-OPTIONS OF THE TRANSACTION.
IF IT IS A PARAMETER I CAN WRITE SET PARAMETER STATEMENT FOR ONE VALUE AND EASILY CALL THE TRANSACTION. BUT I WANT TO FILL THE SELECT-OPTIONS OF THE TCODE.
CAN ANYBODY PLEASE PROVIDE ME THE LOGIC HOW TO FILL THE SELECT-OPTIONS FROM MY REPORT FOR CALLING THE TRANSACTION.
REGARDS,
VASU.

Hi..
Instead of calling the Transaction
Call the Report directly using:
(First declare the Ranges)
ranges : R_matnr for mara-matnr.
(Fill the values into Ranges Table and call the report )
SUBMIT <REPORT>
With s_matnr in R_matnr.
Reward if helpful.

System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

I must decide platform selection for PI/XI system?

I must decide platform selection for PI/XI system?
Most important criteria is performans.Which platform is recommended?
Is there a web address is comparing platforms about PI/XI performance?
Thanks

In order to ascertain these requirements, it comes down to at least three things.
Skills/Knowledge
Costs
Availability (SLAs)
There is no point running on a Unix platform if those skills are not available. Also, the infrastructure for running Unix is measurably more expensive than running windows.
PI7.0 is the current version, however certain companies/partners can Ramp up using 7.1 early next year.
I would recommend using the SAP Sizing tool for this: http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000459153&

Any parameter is required to set "select for Update"

Hi all,
For using "Select for Update" statement, is any parameter is required to set at the database level.
Thanks in advance,

Hi,
I did't get any problem. but before implementing that I searching for any overheads.
I had read that some transaction isolation level should be required to use "select for update".
I did't catch it clearly.
Can u explain briefly if you know/any body know.

Email Message contains "select" & "from" word, system will prompt for security right

Hi All,
Is there anyone ever encounter that if the email message is having a "select" & "from" wording, system will prompt for User ID and password?
I had filled up my CRM User ID & Password, and system will still fail to proceed to send the email. Instead, it is showing "Internet Explorer cannot display the webpage" page.
Please help...
Regards,
Desmond Chan

Hi Abhishek,
Thanks again. That's what we suspect. As mentioned, we only have this issue if the email body is having "select...from" wording,
which it looks like SQL statement.
Few days ago we had some changes in out network (MPLS). Now seems the cause maybe from that, as there is no other changes made recently.

Doubt in configuring entry points for iviews

Hi, I have followed the steps of the help about configuring entry points for iviews:
1.-> in the pcd I have created a folder to store iviews for WPC.
2.->I have gived read permission.
3.->I have desactivated the hide root folder check por pcd repository.
4.->I have created a folder in km.
I am loosing in the step "Create a entry point for the folder that you created in step x".
How link the pcd folder that store the iviews with the km folder?
when I try to create a entry point I only can see km folders, How can I choose my pcd folder?
Thanks.
Regards.

Try this:
Procedure
1. Choose System Administration → System Configuration → Knowledge Management → Content Management → User Interface → Mapping → Component.
2. Edit the wpcDragExplorerEntryPoints configuration object.
Use the following parameters:
Parameter: Description
displaymode:Specify select
maxproviderprio: Highest priority number that standard entry points can have and still be displayed in the Web content browser
entriesperrow: Number of entry points displayed in each row (default: 5)
entrypointsprefix: Prefix of the entry point repository: If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.
Default: /entrypoints
sharedcontent: Semicolon-separated list of paths to be displayed as global entry points for shared content
Examples of parameter values (for sharedcontent param):
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,sharedcontent=/wpccontent/Cross-Site Content;/pcd

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

Dynamic parameter selection from infoview not storing the sql password

We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
To be more specific.
We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
In the Central Management Console for the report object we have set as follows:
Process - Database:
Use original database logon information from the report - the sql username and pw etc
Use same database logon as when report is run
Process - Parameters
In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
This is 100% replicatable on our system.
Any way that we can fix this?
Will an update fix this issue? If so could you please advise which one?
Thanks

Hi,
I am having the exact same problem. Any help?
And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
Regards
Magnus

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

How to pass parameter into transaction iview ?

Hi experts,
I want to know "how to pass parameter into transaction iview ".
Regards,
Krishna Balaji T

Hi Krishna,
Not sure if this can help you.
1) Passing a parameter to a transaction iview (I saw a resolved suggestion)
Passing a parameter to a transaction iview
2) Passing a parameter from the portal to R3 (helpful info for you)
Passing a parameter from the portal to R3
3) Create SAP Transaction iView using SAPGUI for Windows (Great Blog and info about TA Iview)
Create SAP Transaction iView using SAPGUI for Windows
Please check the following link for Transaction Iviews
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/f9e1ac7da0ee4587d79e8de7584966/frameset.htm
Just some info: Portal is basically what the end user can see. What he can do, is still maintain in the backend system. If there are parameters setup already for the user in the backend system (in SU01), then those parameters should still valid for the transaction that the parameters are linked to.
Hope that helps and award points for helpful suggestions.
Ray

F-44 ZBAPI MULTIPLE LINE SELECTIONS FOR WEB SERVICES

HI TO ALL,
I HAVE WRITTEN ZBAPI FOR POSTING MULTIPLE LINE SELECTIONS FOR TCODE F-44, THE ZBAPI CONSIST OF BDC PROGRAM, WHICH IS WORKING IN SAP SYSTEM PERFECTLY BUT WHEN I AM USING IT IN WEB SERVICES IT IS THROWING A ERROR MESSAGE.
PLEASE CAN ANY ONE TELL ME DOES THIS PROCESS WILL WORK OR NOT, IF YES HOW IS IT POSSIBLE

Hi Gabriel,
Let me try to answer some of your questions:
1) The "Requires Secure Access" attribute of a resource handler controls whether this handler must be accessed/consumed only over SSL (HTTPS). Oracle Database Cloud Schema Service is only offered over SSL, so this attribute does not have any effect on RESTful services deployed in this environment (because secure access is always required and there is no other way). That said, if you want to access such web service from your own APEX instance, your instance must have Oracle Wallet configured with appropriate SSL certificate.
2) The URI parameters are not required. If your web service returns data for many entities (for example, list of employees in employees/), you may not need a parameter. If your web service returns data for one specific entity (for example, details of one employee in employees/{id}), you may want to identify that entity with a URI parameter.
3) You can have many URI parameters, for example: customers/{id}/orders/{order_id}.
4) Yes, these are the same HTTP methods/verbs you would use from PHP.
5) If you are trying this POST example from your own APEX instance (not Oracle Database Cloud Schema Service) and you are trying to access a web service over SSL, then it is likely that the Oracle Wallet used by your instance does not include the required SSL certificate(s), or the Oracle Wallet is not configured at all.
6) I recommend to check RESTful Web Services for the Oracle Database Cloud white paper and Oracle REST Data Services Developers Guide. Oracle REST Data Services is the technology that enables RESTful services in the Oracle Database Cloud Schema Service.
You can certainly create your own web services in the Oracle Database Cloud Schema Service and consume them from the same environment.
Vlad

System parameter selection for iView

Similar Messages

Maybe you are looking for