System Perfomance:

my new track has 6 instruments and 5 audio samples being used.
its got a 1.25ghz cpu and 768 mb of ram and the cpu performance box goes into the red. its only stopped playing once or twice due to overload.
its seems to spike when using the audio samples and settle down a little after that
I close all other programs when i use logic. ive got the cache on firefox set to 150mb. could this be the cause? ive got nearly 10gb of free space on the hd and repair the file permissions quite frequently.
am i expecting too much? as i haven't even begun to automate the track yet?!?! Or is it because i using to many au/vst's on the track?
any help welcome..
T
Message was edited by: Technonotice
Message was edited by: Technonotice

I had the same problem. Look at my system specs!!! your a lot better off than me in that department. Power PC processors are in my opinion, 5x greater than anything Intel is capable of putting out. But hear me out, you aren't in trouble. I would go for a RAM upgrade if I were you. That should help a lot. And as for the bouncing problem.... All you really have to do is choose "Offline" at the Bounce options. I hope I was a little help. Let me know how you made out.
Cheers.
-RyConn M.D.

Similar Messages

  • Processor perfomance in G5 Quad - wrong?

    Hi!
    Tell me anybody
    Maybe i do something wrong?
    There is a 4 proc colums In system perfomance window
    When i open new instrument and plugins only one from them goes hi
    And it give me overload error
    Please Help!

    Mike - try what I described above.
    If I recall correctly, you're a programmer? Consider what would beinvolved to factor a Logic session into threads at a finer granularity than this. Taken to the extreme, it would be one thread per plugin, and they'd all be waiting for data the great majority of the time. When you consider the various ways to factor it into threads, using no more than one thread (and therefore CPU) per input-to-output path makes sense, since the sequential evaluation of the inserts can be done without extra threads (OS overhead in thread tables) and without use of synchronization devices such as mutexes.
    Quad G5 2.5Ghz 4.5GB 2x250G, PB 15" 1.5Ghz,80G,1.5G   Mac OS X (10.4.8)   Logic Pro 7.2.3, Focusrite Saffire...

  • Help with OS 10.4.7 on Beige G3

    Here's the problem:
    I upgraded Panther (10.3.9) on my G3 box (Rev A, XLR8 G4 upgrade CPU, Sonnet tempo trio usb/fw/ata133, 640M RAM) to Tiger 10.4 with the help of Xpostfacto 4.0. Upgraded great and ran 10.4.0 just fine. Software update ran and installed 10.4.7 combo update and now it won't boot OS X. I rebooted into OS 9 and launched xpostfacto again and told it to boot from the 10.4.7 partition (I've got the original MacHD with my insurance copy of 10.3.9 and an 80GB disk on the trio card ata133 partioned into a classic/OS9 volume and an 8gb Mac OSX volume on which the 10.4.0 was installed and upgraded). Again no luck.
    Does anyone know if 10.4.7 can run, even with the help of Xpostfacto? If not, what is the latest Tiger version that will run? Right now, I'm back to 10.3.9 running from my original HD that I can clone to the other OS X partition and start over, but if there's a tweak I can apply, I'd appreciate the advice.
    MDD Dual 1.25 G4   Mac OS X (10.4.5)   Mac Mini, G4 Powerbook

    What the heck does "optimizing system perfomance" do anyhow?
    From what I recall it is similar to what Norton Speed disk would do: OSX spreads files across the hard drive and leaves room between each so that if there is heavy computational read/writes going on with an application, there's a nearby space for the virtual memory.
    One of my first Panther installs back in January failed due to my too big 160GB slave drive being on the ATA bus. When I went to delete the first install, I rebooted the hardware with an ancient copy of Norton Utilities 4.0.
    On a lark, since it was going to be deleted anyhow, I took a peek with Speed Disk at the state of the freshly installed (and failed) OSX. It was fragmented and spread EVERYWHERE across the partition! None of the nice and tidy packed into a continuous group of addresses. Nope.
    On closer inspection and some reading, that havoc is normal with the OSX as it's based on the UNIX that came out of the universities. Definitely not a hard drive space issue as it would be with folks on their PC's at home, but a speed concern from the days of mainframes.
    How much optimizing a program gets I guess depends on how important to the Core Services it is. Some of the items just install, like a few games I have but QuickTime took almost 10 minutes to sort it's position out when I updated on my install two weeks ago.
    I'll wager that with the combo update you took in Tiger, it was just too much file shuffling at once for the computer to keep track of.
    Deb.

  • Macbook Pro to Macbook Pro Retina

    Hi, i am having troubles with my Macbook Pro OS X 10.9.5 as the system perfomance is so slow and the applications have tendencies to crash all the time. Is there any way that I could sent it to Apple and actually upgrade it to a Macbook Pro Retina instead? If yes, would it make any difference (system performance wise)?
    Thanks

    Yes you can certainly get the new model. There is nothing stoppiing you from doing that.
    Just sell your current MBP and then take that money and the extra needed and buy one of the new models.
    Not sure why people keep posting this type of question.
    You could also keep your current model and buy the new one. No one at the store will say "Don't you already own a MBP, so you can't buy a new one".
    By the way Apple stores do not take trade ins. It is not a car dealership.

  • Time Out ERROR CC Risk Analysis RFC

    Hi Friends,
    I am getting time out error when I am testing the CC risk analysis RFC. One thiing I monitor here is that when I am changing the parameters to 'YES' in tcode '/virsa/zrtcnfg',this RFC time out is occuring,when I am changing it back to 'NO' it is working fine.
    I beleive there is some system perfomance issue or any bottleneck is happenning.
    Please check error details of the Rfc below
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program GRCRTTOCC5X not registered
    Error Details     LOCATION: SAP-Gateway on host hostname / sapgw00
    Error Details     DETAIL: TP GRCRTTOCC5X not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 65055
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1960
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Thu Mar 11 09:21:35 2010
    Error Details     VERSION: 2
    and also some time I am getting below error
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: timeout during allocate of registered program
    Error Details     LOCATION: SAP-Gateway on host hostname / sapgw00
    Error Details     DETAIL: TP GRCRTTOCC5X init/busy for more than 60 sec
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 65068
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1937
    Error Details     RETURN CODE: 677
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Thu Mar 11 09:29:56 2010
    Error Details     VERSION: 2
    Any suggestion please..
    Thanks & Regards,
    Satyabrat
    Edited by: Satyabrat Mohanty on Mar 11, 2010 11:54 AM
    Edited by: Satyabrat Mohanty on Mar 11, 2010 12:00 PM

    Hi,
    for further information  the latest log is
    2010-04-28 07:01:47,706 [SAPEngine_Application_Thread[impl:3]_18] ERROR  User :   not found to get full name
    2010-04-28 07:02:21,066 [SAPEngine_Application_Thread[impl:3]_11] ERROR
    java.lang.Throwable: java.lang.NullPointerException
         at com.virsa.re.workflow.client.WorkflowRequestClient.getRoleProcessContextDtos(WorkflowRequestClient.java:284)
         at com.virsa.re.workflow.client.WorkflowRequestClient.execSubmitRoleApprovalWF(WorkflowRequestClient.java:83)
         at com.virsa.re.workflow.actions.WorkflowRequestAction.submitApprovalRequest(WorkflowRequestAction.java:95)
         at com.virsa.re.workflow.actions.WorkflowRequestAction.execute(WorkflowRequestAction.java:54)
         at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
         at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
         at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    FYI
    I have already checked all the webservices urls and password everything is fine.am I missing something.
    Regards,
    Satyabrat

  • Looping message in Adapter Engine

    Hello!
    We had a message  which went fine in mapping (IDOC -> proxy) / integration engine (check flags in sxi_monitor) but stopped in Adapter Engine with status "To be delivered". No jammed queues or anything. It didnt help to restart the message, it was just looping. We had to restart one of the PXI-servers and after that it worked succesfully.
    Any ideas what could have caused this or how I can fault-trace / debug this?!

    Hi Stefan,
    To be Delivered can happen because of two reasons:
    1. PI Performance due to sudden heavy loads OR
    2. in this case Receiver system Perfomance may be the case ..
    pls check once with the receiver system performance .. and also the note suggested above(1623356) which mentions thread increase for that particular adapter type.
    I hope this will help..
    Thanks,
    Praveen

  • SAP tools and Third party tools

    Hi SAP frinends,
    I want to know some information of the tools. Now we are using CCMS tool to check the SAP Applications. Is there any tool either SAP or Third party tool to check SAP applications and system perfomance Grafically. We are looking for grafical mode tool. Which tool is better to check running application on SAP systems. Please give your advices for me......
    Best regards,
    Prasanna.

    Hai,
    CCMS is the best way to monitor your SAP applications, SAP has introduced lots of things to encourage use of CCMS for system monitoring. You can Install agents to monitor your systems. If you have a CEN system (SOLMAN) then you can Install agents in all the satellite systems and monitor all the satellite systems from CEN. You can also monitor the availablity of the satellite systems from CEN using CCMSPING agent.
    For checking the Performance of the system if you have only ABAP stack then you can use ST03N where you can get the graphical representations as well. For JAVA stack you can use Eclipse which is a tool from SAP.
    Check the below link.....
    http://www.basisconsultant.com/blogs/91-tips/264-an-experience-with-java-memory-analyzer.html
    Regards,
    Yoganand.V

  • Attaching files to Documents

    1) How can we attach any files (word, pdf, email messages etc) to sales orders, credit memo requests etc?
    2) Is there any restriction in attaching these files to sales orders? Is there any impact on system perfomance if we attach documents?
    Could you describe both with DMS and without DMS.
    Regrads,

    Hi
    I need to add attachments (pdfs) to sales order.
    I understand that the following is required for viewing this option - services for objects:
    Reference-SAP Note:  Note 598073 - Message "No service available"
          1. In Release 4.70, the object services for Transactions VA02/VA03 were deactivated in the SAP Standard System (for performance reasons). However, the object services can be reactivated individually by setting user/profile parameter SD_SWU_ACTIVE = X.
          2. The object services are only available for dialog users, that is, if you choose user type 'Dialog' for the corresponding user on the 'Logon data' screen in Transaction SU01.
    My system is 4.6C and I am not able to add this parameter - "Parameter ID  SD_SWU_ACTIVE does not exist".
    My user type is 'dialog'.
    Can you tell me if there is something else that I need to activate?
    Regards
    Manoj

  • Adobe X Memory Utilization Issue - Adobe Please Respond

    I have been reading through the forums and have noticed the question come up with no actual resolutions from the Adobe team. I have multiple clients with this same issue, when they open PDF documents, typicaly ones that have been created from a MS Office application (word, excel, powerpoint) or have document security enabled, the memory utilization shoots way up causing system perfomance issues.
    The systems that I am working with  all are running Windows 7 Pro both 64 Bit and 32 bit, all systems have at least 4+ GB of DDR3 RAM and the latest Intel Core Processors.
    I have tried the following to resolve the issue.
    Check for and install any available updates.
    Uninstall Adobe Reader X and download and install using the latest installer from the Adobe website.
    This issue is reporducable accrossed multiple workstations and can be isolated to the Adobe products.
    My qustions for Adobe are:
    Do you consider this a "Know Issue"
    Is this issue scheduled to be resolved in an upcoming update and if so what is the ETA
    Are there any current "Work Arrounds"

    Hi wayne103,
    We released a new security update yesterday that is v10.1.11
    Please update to this version and check the performance.
    I have seen this error message occur while opening a 3rd party created pdf that has corrupted file structure.
    Please let me know if the issue occurs for some specific files or random
    Also let me know the PDF producer for these pdfs.
    Regards,
    Rave

  • 96 KHZ Project. IS IT REALLY POSSIBLE?

    Hi!
    I use a G5 dual 1.8, 2Gb RAM, a second SATA Drive (used to audio and sample files), and a Lacie Big 400 (used to Ivory and DFH library), M-Audio Midisport 8X8 USB Interface, and MOTU 24 I/O audio interface.
    For the first time, I tried out a 96Kz project, and believe me, using only one audio instrument (EVB3), I had some clicks and pops present at the organ sound. I've opened the system perfomance metter, and with only one key stroke, I get it in the middle of one processor. The more notes I hit, more noise is present at the sound (Yes, I checked the MOTU and Logic's levels. It's just fine). To be sure about it, I changed the project sample rate back to 48Kz, and the noise desapered.
    Do I have some trouble with my system, or isn't a G5 dual 1.8 suficient to run a 96Kz project with (for example) 30 audio files and 4 or 5 audio instruments?
    Any suggestions?
    Thank you
    Tovinho

    You probably need to increase your buffer size - yes it will increase the latency but the clicks and pops will go away.
    I believe that latency cuts in half when going from 48k to 96k sample rate, so you should be able to double your buffer size with no problem.
    HL

  • Remote Access Requirement

    Dear Experts,
    Currently our Business One 2005A version software is installed in SQL Server.
    Remote access is made through Citrix Web Interface Metaframe Presentation Server.
    Would someone tell me if we can access remotely through Terminal Server instead to the SQL server and maintain system perfomance? In this senario what will be the web interface requirement?
    Thanks,
    Kunitomo

    Dear Kunitomo,
    Definitely! Actually Terminal Server might be better option than Citrix because it users system resources more efficiently.
    An RDP would be the client option for Terminal Server.
    Thanks,
    Gordon

  • H264 exporting to ProRes

    Hi All,
    I use a 5DMK3 and record H264 files, which I then import and edit directly within the FCPX timeline. I have found that my system perfoms without any issues and no need to convert the footage into pro res. After I complete a project and will the quality be anybetter If I export to ProRes 422 as I am already working with compressed footage (H264)

    If you're getting good performance with h.264, great. And no. You do not get this transcoded Changing to PR will not improve quality of your clips…it may, however, improve the quality of the graphics. Give it a test,
    Good luck.
    Russ

  • Optimal Settings for my new box

    I've put together a new box, and it would be great if you guys could please give me some guidance on the optimal BIOS settings that I can use to make the most of it.  
    KT6 Delta FISR
    2 x Crucial 512 DDR333 PC2700 DIMM
    Speeze EEA31B2 Coppereagle Amd Cpu Cooler- Xp3200+ Copper
    AMD ATHLON XP2700+ 333MHZ FSB 256Cache CPU - Thoroughbred - OEM
    Case Antec Sonata 380 Watt TruPower
    2 Seagate Barracuda 7200rpm.
    I'm not looking to use this box for games, the case has a 120mm fan as well as psu fan.
    What do you reckon will be the best setup?
    Many thanks in anticipation.
    Jonnie

    That crucial RAM should beable to hit 200FSB with longer timings or so.
    (I managed to OC some old PC2100 to PC2700 on same timings so its possible)
    and IF the cpu can be unlocked from bios, change it to about 10x200 settings.
    IF NOT, then try the "pin trick in the socket".
    Tbred-B are pretty tough, it'll do it as long as that ram can do 200FSB.
    If the RAM dosnt do 200FSB, then get the CPU up a few steps in multipliers, hopefully. Do testing with 3DMark03's CPU benchmark, its very fussy on the CPU stability, so you know it runs stable.
    Bios;
    Im using PCI latency at 96 and it holds the bus well for fast disk and perfect sound and "wire on fire" LAN transfers.
    64 works quite good too, but loses a bit with overall transfers speeds and interuptions.
    System Perfomance setting in DRAM Settings - just leave it on Fast (gigabit lan hates the other settings) Bugs???

  • Dell Inspiron 6400

    Hi, does anyone use archlinux on a dell inspiron 6400? Do you have any advice on how to speed up the boot, and configure the machine for best performance? Actually, i don't have any problem or so, just wondering howto increase my system perfomance and remove any kind of useless stuff to speed up my machine a bit

    Did you read this wiki article?
    http://wiki.archlinux.org/index.php/Max … erformance
    Not specific to your machine, but contains some general hints.

  • Multicam Edit Really Slow

    I am editing DV PAL and have just noticed that there is bug which is delaying my keyboard commands to switch to different cameras in the multicamera window.
    Firstly after lining up my two cameras, I exported the audio alone to a wav format so I could mix it from both cameras right. Then imported it back into my project and overlayed the audio in track one of the layered sequence. I muted the audio from both cameras in track 2 and 3. Created another sequence and dragged my layered sequence for multicam edit. Apparently when I start playing with the yellow borders around camera 1, it plays fine but when I change to camera 2 it is just instant and the border now changes to red. If I press 1 for camera 1 it responds after 2 - 3 seconds and carries on like that. At times it appears as if its no longer playing in real time. All the colour correction in the layered sequence have been disabled.  I have stopped the editing because I would like to sync some of the sections with music beats in the scene to make it more interesting.
    Am I missing something, here or its my sytem or the footage that is just too slow for the editing process? Other than that I might have to push on like that and review the edit once the multicam window is closed. This method will not produce the results I am after. I have done it before and it use to work only slowing down when its coming to the end of at least 50 minutes multicam sequence and this one is just 40 minutes.
    All the video files are located on RAID 1.
    My system configuration is as follows
    APP CS4
    HP XW6600
    Quad Xeon 5420 2.5Ghz
    Vista Business 64bit
    Nvidia Quadro FX4600 GPU
    8GB RAM
    RAID 1 esata
    250 GB C drive HDD
    750 GB D drive
    22" HD monitor.
    I have attached a pdf which showed my system perfomance at the time of the multicam edit.

    One big bottleneck for the system is the way PPro deals with the audio. For a test, try disabling all the audio.  you should see a big performance increase.  The trick now is to keep PPro from working too hard on the sound.
    Try this - Instead of placing your mixed audio track on track 1 in the source timeline, place it in track 2 of the timeline you actually use for the multicamera editing.  Then delete anything in track 1 in this timeline.  You can link the video and track 2, but pay attention when you remove material that you are cutting audio 2 as well, to keep everything in sync.
    It may still not be perfect, but it should help.  You can also disable any color-correction on the tracks until you are finished cutting, as this is a system drag in multicam.
    Multicam is overall a bit of a mess in CS4.  The delay you see is no fun.  You will notice, however, that the actual cut will be at the right moment.

Maybe you are looking for