System Performance - ERROR Workitems

Hi Friends ,
I have the following query .
I have no of workitems in ERROR status and workflow has been stopped . I dnt want to process those workflows further .
I dnt want those ERROR workitems to be cleaned from my sysetm . I think this ERROR workitems may hamper the syetm performace later .
Is there any way through which i can remove all these ERROR Workitems along with respective workflows from my system.
Is the ERROR Workitems affects the syetm performance .
Thanks in advance .
Regards
Prabhudutta

You can archive them. This will remove them from system but also will keep safe in archive for future ref if you need.
SARA is teh tcode and object is WORKITEM.
it is not only errored but all teh work items if grow over certain volume can cause proformance issues. best way to handle is put and time based archiving policy like archive at the end of every year keeping one years hostory. So there is nothing to do for first couple of years. If systems is old enough it is time to start thinking.
Just remeber it is nto only Staus ERROR work items in all other statuses like COMPLETED CANCELLED etc etc will effect teh profrmance once they reach a certain volume.
Warm Regards,
Anuj

Similar Messages

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

Help needed in getting real time system performance monitor

Hi,
I need a real time system performance monitor for my solaris.
i am able to graph system usage graph on a daily/weely basis using the ksar grapher.
In the same way i need to capture the system utilisation real time to be viewed on a webpage. Please let me know if there are any free tool/scripts capable of doing it.

Hi,
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Hope this helps.
Thanks,
JituK

FDM data target system load error

Hi,
I am trying to Load the data from FDM11.1.1.3 to Planning11.1.1.3
I am using Essbase Adapter ES11X-G4-E,I imported data from a csv file ,it is imported success,and Export file was also successfully created,
My question : after this I am getting the error message in another window Target system laod , Error:Invalid use of null
Can you please anybody tell me what is the reasons for getting this error ?
Regards,
SV

One of the values on the Hyperion Essbase Integration Setup tab of the adapter is currently empty. Perform the following
a) Right-Click on the Essbase adpater in the workbench and choose Configure
b) Click on the Hyperion Essbase Integration Setup tab
c)Click on the Load/Check button
d) Verifiy that the List1, List2, and List3 boxes are not empty. These must have values:
List1: 0 -Load
List2: opt1
List3: opt1

Disk is too slow or System Overload Errors(-10010)

Hi, It may have been a mistake, but for the 1st time in a long time, I updated my system and software two days ago, after which i tried to runm Logic 9. During playback, I am not getting a random error message that "Disk is too slow or System orverload. This is a system that has operated error free for the past eighteen months, no problems, until now! What really puzzles me about this is the part about "motion Sensor" ! My system is a Mac Pro Desktop unit and not a laptop, and definitely not equipped with and motion sensor(s) at least not that I am aware of.
Can nyone shed some light on this for me?
Thanks in advance

Hi
rockfort wrote:
Did you repair permissions after the OS update?
** I don't know how**
To repair Permissions, in the Finder, use the Go:Utilities function, and run Disk Utility.
In Disk Utility, select the boot drive partition on the left and click on "Repair Disk Permissions".
rockfort wrote:
Free space on the OS and/or Project drive(s)?
** 1.78TB space free on the drive**
So, are you recording /playing back your projects from your System drive?
This is not generally recommended. Instead one should really use an second (Project) drive either Internal (no good for an iMac) or external Firewire/Thunderbolt drive (depends which iMac you have).
Further, the error message you have been getting is a general "Disk too slow" and/or "CPU overloaded" message.
It would be worth keeping an eye on the System Performance meter in Logic whilst playing the project (Double click on the CPU meter in the Transport or use :Options:Audio:System Performance) to see if it is CPU or Disk related
CCT

My HP 2000 keeps crashing, the message is System Recovery Error or Enabled

My HP 200 Note Book keeps crashing and restarting. The message is something like System Recovery Error or System Recovery Enabled. Also Firefox keeps crashing. I have run virus and malware scans. It must be something in the hard drive? Anyone else run into this problem?

Hello P25ab07,
What is your product number? Did you attempt to perform a recovery in the past?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

The Operating System returned Error 27(The drive cannot find the sector requested.)

On a Windows 2008 R2 server running SQL 2008 Standard on a Raid 5, when performing a backup on the databases via copy to another local drive I receive and The operating system returned error 27(The drive cannot find the sector requested.) to SQL Server during
a write at offset 0x0000002fd204000 in the file F:\SQLDATA\Email_Images.mdf. The server is a HP DL380p Gen8. I've contacted HP thinking this was a Hardware issue but HP ensure me its not and to contract Microsoft support.

Hi,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Please offer us what backup method you are using, did you want to backup
the data to the CSV, the origional error you have got.
1. The best method would be to have separate disk drive for each cluster SQL instance and add the disk to the specific SQL group and add it to the dependency of the SQL resource.
There would be less overhead with this process other than having to create two disks, one of each instance
2. You could consider creating a file sharing resource on cluster and add the backup disk to this resource group and use it to back up the databases of both the instances
to single disk. The down side of this method would be, all the databases backups will fail if the fileshare resource goes down. You cannot use GUI to take the backup, need additional setup/maintenance for the fileshare resource group
http://support.microsoft.com/kb/224967
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

When start Dreamweaver cs 5.5 system fatar error (c000021a) 0xc0000005

Hi all,
After dreamweaver cs 5.5 installation. i getting this below error and system has been shutdown
c00000021a (0xc0000005) system fatal error.
i am using win xp sp2 32bit system.
AMD phenom II x4 945 and 2 gb ram ddr3
i have installed photoshop cs5. but is working fine. but when i start dreamweaver sytem got shutdow.
Please give me solution for this.
thanks and Regards
srinivas

The error 0xC0000005 is generated by an illegal "memory access violation". This can be caused by anything from faulty RAM, to an incorrect/corrupt device driver, to poorly written/updated software and more commonly under Windows XP Service pack 2, malware/adware installations.
Usually you get this error message when performing a specific task, and if that happens you need to check the corresponding 3rd party's website/support department to see if they are aware of the problem. I doubt it is a Dreamweaver problem though, based on personal experience.
..a while back Symantec Antivirus caused the 0xC0000005 error with an additional message about a file called SAVRT.SYS . A simple software update to the Symantec Antivirus cured the problem.
0xC0000005 - Resolution Suggestion One:
In many cases this error has been generated by faulty RAM memory. So if you have just upgraded your computer with some new memory and you started getting this error then I would remove the new RAM and see if the error goes away. If it does then send the memory back and get a refund!
XP is on SP3 and you should really be running it.
If you don't have malware detection, get some, run a scan and clean it fromyour system.

Background error workitem handling

Hi All,
Is there any standard report or background job or any standard feature to handle the error workitems?
how to handle the error items?
Thanks & Regards,
Sangeeta

Hi Sangeeta,
You can opt 3 ways to handle error workitem
1) If error is due to system crash : Run transaction : SWPC
2) Sometime by running transaction SWPR(restart workflow), error gets removed(sometime)
3) Look into the logs and find out the reason and act as per that.( Solution is hectic one)
4) Logically delete instances of workflow, in case the process for which WF is created can be handled manuallly.
Regards,
Vikram Singh.

Unable to create system performance counter SharePoint Disk-Based Cache - SharePoint 2010 SP2 Farm

Hi,
I'm getting this in my Trace Logs:
Performance Counter OS (pdh) call failed with error code PDH_CSTATUS_BAD_COUNTERNAME
PDH failure on counter <serverName>\Sharepoint Disk-Based Cache\Blob Cache hit ration with Unknown error (0x0000bc0)
Unable to create system performance counter <ServerName>\SharePoint Disk-Based Cache\\Blob Cache fill ratio
Unable to create system performance counter <ServerName>\SharePoint Disk-Based Cache\\Total Blob Size
There are bunch of them from SharePoint Disk-Based Cache counter that its trying to create but they cannot be used.
I've logged on to the server as a farm admin, which has full farm permissions, local admin and runs OWSTIMER.EXE service, but I was not able to add the counters myself. I've read few posts here on TechNet but no one answered on how to enable/recreate these
performance counters. I would like to resolve this if its possible.

I could not find the reason why those SharePoint Performance Counters were not on the WFE servers so I just disabled the "Diagnostic Data Provider: Performance Counters - Web Front Ends" in the Central Admin > Monitoring > Job Definitions.

Judging System Performance ... (was System Overload Problem...)

In a previous thread (was System Overload Problem...) ... I encountered system overload errors as described, while the system performance monitor showed almost no usage for either the disk I/O or the audio monitors.
I was just using some audio Instruments and a few plug-in's ( as was listed in the previous thread) ...
Question: So, and I missing something, or - how can we actually judge the system performance related to actual CPU usage? It seems as though there should be a third column ...
- 1 for disk I/O
- 1 for audio
- 1 for CPU
I would appreciate any insights on this matter.

If you do a search for '10010' (also other 1001x errors) or 'error' you'll find plenty of threads of people with the same errors without good reason for the error's description-sometimes it is a driver conflict but the error returned is system overload. These errors are not always indicative of what actually caused the problem.
http://discussions.apple.com/thread.jspa?messageID=765043&#765043
http://discussions.apple.com/thread.jspa?messageID=766671&#766671
http://discussions.apple.com/thread.jspa?messageID=762124&#762124
And there are many little prefs, processes or actions which may trigger it. Many of them go unresolved.

Best System Performance

Hi Experts,
Please kindly tell me what is the best way to check SAP NW2004s under Windows 2003 Server... System Performance and DataBASE performance and system tuning
DB12 and ST02 but where should I check what level I check everyday!!! ?
If Table space is increase please how to resolved it...
I am creating one daily task to check system performance and report to managemnet please help me
Thank in Advanced
Angeline P

Hi TA,
System Performance is of many things put gethere and assess the system performance and workload distribution.
And as whole system maitenance can be treated with Dialy Tasks, Weekly Tasks and Monthly (ofcourse Yearly if anything).
Daily Tasks would be -
Check the Work Process Status
Check the SAP System Check: SM28
Check the Updates : SM13
Check the System Log: SM21
Check Locks: SM12
Check Dumps: ST22
Check the Spool : SP01 (Probably Consistence Check)
Check the Average CPU utilization: ST06 as well at OS level
Check the Memory Utilization: ST06
Check the Memory Swaps: ST06
Check the Batch Job: SM37 (for failed Jobs)
All the above areas are to be checked everyday and take necessory action based the errors/failure that you see in your system.
Okay, If you are looking for some standard format of weekly SAP Systems Performance report, then I would suggest to configure Early Watch Alert Report (EWA) which basically reads your system and gives you detailed report of your system behavior for last 7 days and that you can certainly share with your management. But you require Solution Manager Implemented in your environment. If Solution manager not implemented, then if you have OSS connection open with SAP Service Market Place then you ask for SAP to prepare a report for you ....SAP helps in preparing the report send you across.
If Tablespace is filling up, then you need to configure Backup properly. And if backups happenning properly then please increase your tablespace area to address the issue. Basically a good data maintenance avoids this problem.
I hope this helps you to address your concerns.
Regards
Sekhar

FBRA: System lock error inform system administrator

While trying to reset a document transaction code FBRA, am getting the error message "System lock error inform your system administrator" when I hit the save button.
how do i solve this?
You help is much obliged.
ogutu

Dear Ogutu,
the F5288 error message (System lock error: inform system Administrator)
appears to be caused by a table overflow as it takes place with a very
large document ie. xxxx line items. As all the items must be locked when
transaction FBRA is performed, there is not enough space in the lock
table.
Please extend the profile-parameter "enque/table_size", as per note
13907, 487347 which I have attached, in order to overcome this problem.
You have to change a parameter.
Then please remember to restart the server after extend the
profile-parameter "enque/table_size", as per note note 13907.
If you already did it and nothing changed, please increase the parameter
again.
Please be aware that You have also to implement the solution described
in note 487347. There is not only correction code, there is also some
steps to do in order to solve the incident (manual changes have to be
done in SE93):
1. Implement the corrections. The corrections are not contained in the
     SAP Standard System. See Note 170183.
2. Use Transaction SE93 to create the parameter transaction FBRA_LOAC
     referring to transaction FBRA. In addition to the descriptive text
     'Reset Cleared Items with Account Block', you have to enter the
     value FBRA in the 'Transaction' field.
3. In problematic cases, use transaction FBRA_LOAC to reset cleared
     items. The transaction is not designed to replace the existing
     transaction FBRA. The transaction only provides the option to reset
     cleared items in case of an overflow of the lock table.
I hope this helps.
Mauri

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name   : server0
pid         : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

System fan error on g62-352ca on startup. are there two fans ie a cpu fan and a system fan?

I get a system fan error on power up? Are there two fans in the G52-352CA? Ie a general system fan and a CPU cooling fan or just the one CPU/heatsink fan?
If it is the CPU/heatsink fan then there are 4 part numbers for different options. Is there some way to tell from the model number or features as to which is needed. I would prefer to have the part in hand before opening everything up. Are there better fans to buy and if so how do I find them? This unit was always running a little on the warm/hot side,

Hi,
Could you add the error message to the next reply?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

System Performance - ERROR Workitems

Similar Messages

Maybe you are looking for