System preferences must quit and reopen 32-bit unchecked

Hello,
Whenever i try to open Network, users&groups... i get this message "To use the “name of pane” preferences pane, System Preferences must quit and reopen."
I've already checked that 32-bit mode is unchecked I've tried repairing disk permissions with no luck so far.
MacBook Pro
15-inch, Late 2011
Processor  2.2 GHz Intel Core i7
Memory  4 GB 1333 MHz DDR3
Graphics  Intel HD Graphics 3000 384 MB
Software  OS X 10.9.4 (13E28)

If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Similar Messages

  • System Preferences "Must Quit and Reopen" No "Open in 32-bit" Option to Uncheck

    Everything worked fine when I had 10.7. But I still updated to 10.8 when it came out. I spent quite a while trying to figure out why I couldn't use many of the preferences in the system preferences. I kept getting the message: "To use the ____ preferences pane, System Preferences must quit and reopen." Quitting and reopenning sends me on an infinite loop.
    I've scowered the support communities and found no help. The communities kept saying I should go to the System Preferences file in Applications, go to Get Info, and uncheck a box that says "Open in 32-bit Mode." Unfortunately, I have never had that box. Today I updated to 10.8.4, hoping that this would finally get fixed. It was not.
    Is there any solution I'm missing?

    Just got same problem.
    #1. There is no Box, under Label or anywher to uncheck or check.
    #2. The device I want to use does not have an update driver. What I really need if for the Box to check or uncheck which should be there according to Apple Help.
    #3. I tried this, resetting the whole computer's kernal extension by using a Terminal command (although I don't like doing that). It didn't work. sudo systemsetup -setkernelbootarchitecture i386
    So I reset it to: sudo systemsetup -setkernelbootarchitecture x86_64
    But emphasize, again, I don't like doing SUDO commands in Terminal.
    So...Anything else to try?
    Thanks for any info that might help.

  • To use the "Users & Groups" preferences pane, System Preferences must quit and reopen.

    When I try to access some of the system preferences in Mavericks I get an error pane that states "To use the “Users & Groups” preferences pane, System Preferences must quit and reopen."
    Has anybody had this problem and if so what is the fix?

    Usually happens if you opened one that was 32-bit. Then, you need to revert back to 64-bit.

  • When attempting to set up iCloud on my iMac I receive the following error message 'To use the "iCloud" preferences pane, System Preferences must quit and reopen'. I have tried quitting, re-booting etc but still receive this message. Any ideas?

    When attempting to set up iCloud on my iMac I receive the following error message "To use the 'iCloud' preferences pane, System Preferences must quit and reopen."
    I have tried quitting, even re-booting etc but still receive this message. Any ideas?

    This is a shot in the dark, but try this:
    log-in to your iCloud account with your Apple ID
    change your password
    ensure your billing information is up-to-date
    attempt to re-enable your Keychain (again)

  • TS4001 To use the "iCloud" preferences pane, System Preferences must quit and reopen.

    And I reopen SP and the same message comes up.....please help

    Just got same problem.
    #1. There is no Box, under Label or anywher to uncheck or check.
    #2. The device I want to use does not have an update driver. What I really need if for the Box to check or uncheck which should be there according to Apple Help.
    #3. I tried this, resetting the whole computer's kernal extension by using a Terminal command (although I don't like doing that). It didn't work. sudo systemsetup -setkernelbootarchitecture i386
    So I reset it to: sudo systemsetup -setkernelbootarchitecture x86_64
    But emphasize, again, I don't like doing SUDO commands in Terminal.
    So...Anything else to try?
    Thanks for any info that might help.

  • System preferences automatic 'quit' and re-open'.

    I cannot get System preferences to quit and reopen to allow for 32-bit compatability mode to work.

    Mackinstyle wrote:
    Somehow the .plist for the auto backup had its' permissions changed. No idea how, since I haven't fooled with it or with any Time Machine third party apps.
    For future reference, you probably didn't need to do a restore. A "full reset" of Time Machine probably would have done it. See #A4 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
    Either way, Repair Permissions noticed a problem and fixed it. My problem is resolved. Thanks so much!
    For bonus points:
    When I did a restore, to my pleasure, I surprisingly found that it had included all my configs and even my wallpaper. I thought it only backed up data.
    No, Time Machine backs-up your entire system: OSX, apps, configuration, users, preferences, etc. (unless you exclude things).
    If I exclude the Library folders, will all these settings not be backed up
    Correct. In most cases, it's a bad idea to exclude much of anything. See #11 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

  • System Preferences saying it needs to "quit and reopen".

    Hello!
    So, I upgraded from Leopard to Snow Leopard, and re-installed pretty much everything. The only thing I imported from 10.5 was the Perian PrefPane, because it was a modified version that allows you to chagne the size of the subtitles.. some dude gave me the link once and I can't find it (the link) again.
    Anyway, When I open System Preferences, if I click on any other prefpane it just opens it normally. If I click on Perian, it says: (please see the image on the link.. I'm not really sure on how to attach the image here) http://grab.by/1Nho
    Then, when I click "ok", it quits, reopens, and takes me to the PrefPane.
    Any ideas on how to remove this behavior?
    I already tried 'getting info' on the prefpane file (and the package contents) and changing to 'read&write'.. didn't work.
    Thanks for the help!
    -Alessandro

    this happens because the preference pane is written in 32-bit and system preferences runs in 64-bit by default. so it needs to quit and restart in 32-bit every time you do this. you can set System preferences to always open in 32-bit. there is really no benefit in running it in 64-bit anyway.
    go to the main Applications folder, select System preferences and enter command+i. in the popup check the box "open in 32 bit". that's it.
    Message was edited by: V.K.

  • My problem started when system preferences was unresponsive and would not force quit.  I tryed to restart and got the grey screen, but it never restarted.  I closed the lid and now the screen is blank.  Has anyone had a similar problem after Lion?

    My problem started when system preferences was unresponsive and would not force quit.  I tryed to restart and got the grey screen, but it never restarted.  I closed the lid and now the screen is blank.  Has anyone had a similar problem after Lion installation?

    No, as I have yet to be convinced on Lion.
    Did a permissions repair help from the install DVD?

  • I transfered my iWork '09 to my new Mac Air. Now my Keynote won't open. I get message, "An unexpected error has occurred, please quit and reopen Keynote." This doesn't work.

    I transfered my iWork '09 to my new Mac Air. Now my Keynote won't open. I get message, "An unexpected error has occurred, please quit and reopen Keynote." This doesn't work.

    so Keynote still isnt working after installing, I thought you had it sorted from your last post.
    If you have not done so remove any files relating to iWork and Keynote and reinstall iWork
    files that must go are:
    the iWork ’09 folder from the main HD > Applications;
    the iWork ’09 folder in HD > Library > Application Support
    the individual iWork application plist files found in HD > Users > (your account) > Library >
    There are a number of free application removal tools  that will do this for you:
    trashme       webpage
    apptrap        webpage
    appcleaner   webpage

  • External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

    External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

    Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
    Does the drive now appear in finder..
    If not reboot both drive and the AE.. it should now appear.
    If it doesn't work with direct connection try a powered hub.. that can help.

  • HT1379 iMac cant find mouse in the system preferences, new batteries and turned on

    iMac cant find mouse in the system preferences, new batteries and turned on
    Mouse seems like it just died. Waiting for bluetooth mouse to be discovered...just spins and spins.
    Help please

    simensen wrote:
    I have a 2007 MacBook  and a new Ipad Air.  Is it possible to sync the two even though I don't have Icloud in my Macbook preferences? 
    Yes. You can use iTunes 11.
    As noted, you need 10.7.5 to use iCloud though.

  • System Preferences, Address book, and ical suddenly won't open

    As I said My system Preferences, Address book, and ical suddenly won't open. This seemed to have happen all at once. The only unusual thing to happen lately is that my ipod was corrupted and I resored it last night. Now when I try to open these programs I get one or two bounces on the icon, then nothing. My other programs including itunes seem to work fine. There are no error messages at all.

    /System/Library/Frameworks/Message.framework/Versions/B/Message (file is empty)OK, this is an important part of your basic system and will need to be restored.
    First you should boot from your Install Disk and repair your disk: see Using Disk Utility and fsck to resolve startup issues or perform disk maintenance.
    Then I think you would be wise to consider an Archive & Install. See Mac OS X : About the Archive and Install Feature. This should put back the missing file(s). You will also then need to re-apply the Mac OS X 10.3.9 Update (Combo), and anything else Software Update says is missing.
    Post back and let us know how you get on!

  • I installed Lion and now have 2 system preferences(1 original and 1 alias). How to fix?

    I installed Lion and now have 2 system preferences(1 original and 1 alias). I'm trying to clean up Launchpad and I have 2 system preferences and 2 iTunes apps. How can I merge or remove the unecessary files?

    No. It's perfectly safe. An alias is just a pointer to the actual file, not the file itself.
    BTW, the icons in the Dock are also just aliases, so it's safe to remove those as well, and just keep the ones you use often.

  • I moved system preferences to trash and probably need to reboot computer help! I also cant open iphoto

    I moved system preferences to trash and probably need to reboot computer help! I also cant open iphoto

    Move it back.  It is essential for the operation of thngs.

  • I've just downloaded facetime and every tie I attempt to open it I get the message"there was a problem with facetime you need to quit and reopen facetime" I've tried this but  I just get the same message again and again

    i've just downloaded facetime and every tie I attempt to open it I get the message"there was a problem with facetime you need to quit and reopen facetime" I've tried this but  I just get the same message again and again

    Hello tadom,
    Thanks for the question. The following article outlines the exact error message you described, and a potential resolution:
    OS X: "An internal FaceTime error occurred" alert after clicking Facetime icon in the Dock
    http://support.apple.com/kb/TS4457
    Thanks,
    Matt M

Maybe you are looking for

  • How do I make a custom Forward button and Back button?

    I've got an almost completely custom theme and it's working great with one exception: The forward and back buttons (used to move between menu pages) are from the original theme I based mine on, and they are now white on white = invisible. I tried sho

  • Question about Scenario File -xi - bw

    Hallo, I have here a problem, gladly would know whether which I try here am possible, and whether from this description errors are to be recognized? I developed an example: File --> SAP XI --> BW  without proxy !!!! My systems: SAP R/3 6.20 with XI A

  • Buying new iMac - Advices

    Hello, in a few days I'll buy a new iMac, I'm already a holder of an old 2010 iMac 21,5. I thought to remain on a 21,5 because for how expensive it can be, it is less than a 27, even if in this one there is the possibility to add RAM in future, would

  • Java parser

    Can anyone tell where can i get an XML->DOM parser for java? TIA

  • Dynamic ACTION creation

    Hi Everybody , I am working on dynamic creating ui ELEMENTS . iI want to create buttons dynamically in tab strip . And i dont know how many buttons i have to create also in design time .so i want to create actions also dynamically and assigneg action