System Preferences Pane "Sharing" is slow

The System Preferences "Sharing" panel of my new (just out of the box) MacMini 1.83Ghz/Core Duo/10.4.8 is very very slow (the spinning ball appears for 30-40 seconds). All other panels open instantaneously.
The console system log says "System Preferences[346] state: SCGetServer Attribute returned 268435460" while the ball is spinning.
On my MacBook Pro (same OS) I don't get this issue, the console log don't write anything when I access "Sharing" panel and all panels are ok.
What happen? Thanks

Solved! I updated pre-bindings with System Optimizer X software and that's all right! Bye!

Similar Messages

  • System preference pane is too slow to use.

    As stated, my preferences>appearance window show spinning wheel for a very long time (15+sec) every time I make a selection.
    If I log in as a different user it works normally.
    I've zapped parameter ram
    I've reset-nvram and reset-all from open firmware
    I've trashed my .....systempreferences.plist file
    Restarted computer.
    Nothing helps.
    Any ideas? Thanks

    Bonnie,
    Start *Windows'* safe mode with networking enabled
    - win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
    Still In Windows safe mode, start thunderbird in safe mode
    - http://support.mozillamessaging.com/en-US/kb/safe-mode
    Does problem go away?
    And, what antivirus software do you use?

  • System Preferences pane and ipfw rules conflict

    If i configure ipfw rules using this script (launced with sudo):
    #!/bin/bash
    ipfw add pipe 1 ip from any to any out
    ipfw pipe 1 config bw 200Kbit/s queue 50KBytes
    ipfw add pipe 2 ip from any to any in
    ipfw pipe 2 config bw 2Mbit/s queue 50KBytes
    or using WaterRoof (http://www.hanynet.com/waterroof/).
    When I try to access the Firewall configuration page of the System Preferences pane an alert window notice me that there is another software firewall already running and that I should disable it to be able to access rules configurations from the System Preferences pane.
    Is it gone crazy? What should I do to have access to firewall configuration from the System Preference pane and contemporary have access to commandline advanced rules, avoiding them to conflict?

    The "solved" post in this thread addresses how to regain control, albeit not while simultaneously allowing control from a command line ipfw or the WaterRoof GUI front-end.
    The first "helpful" post in that same thread talked about how if Sys Prefs Sharing saw an altered ipfw list, then Sharing assumed other firewall software was running, so you got the "other firewall" splash screen, or something like that.
    It appears that they don't like to coexist, and there's probably nothing that you can do about it.

  • System Preferences pane - security icon no longer works on all tabs

    System Preferences pane has several tabs where there there is a security option, i.e.: a padlock icon with 'click lock to prevent further changes".
    the icon is not working on all the tabs - it works on some tabs, but on others it just flashes and stays unlocked.

    so today it works... WT*!

  • System Preference Panes non-functional (some)

    I am "fixing" a friends MacBook Pro as a favour, and she's getting exactly what she paid for. It may be a few years old - not sure. It's running Snow Leopard, 10.6.8, but I'm putting it in this more general section because it may not be SL-specific.
    A few of the System Preferences panes don't work. A message comes up which simply says "non-functional" or something like that. Specifically, the ones whcih don't work are:
    Desktop and ScreenSaver
    Spotlight
    Energy Saver
    Background: she forgot her password, and this is on a computer which was formerly someone else's. I couldn't even get the thing to the login screen, so something else was wrong besides her password, but I had her gray Snow Leopard installation disks, so got through the re-install process, made a new User for myself, as Administrator, and was then delighted to find that all of her data was still intact. I had to add myself in to the permissions on her UserID. I made a new user for her as well, because we still didn't have her own original password, and I looked around but couldn't find it. I copied all of her data over to her new UserID.
    I also did all Updates, plus tried a 10.6.8. combo update.
    Then I made an error. The former owners UserID was also still there. We couldn't log on as her either, without her password, but I figured that we didn't need that anymore, checked with the current owner first, and deleted the original User (and renamed the computer). I cannot reconstruct in my mind whether the System Preferences panes malfunction occurred before or after deleting the original User.
    There is other minor wonkiness, but basically the machine is running and the data has been preserved (and now backed up). But one thing at a time: I've reinstalled the OS a couple of times, without improvement. I tried to upgrade to Mavericks, but after downloading, it told me that this computer could not be upgraded (without saying why not).
    I haven't found any plist files which look relevant. I did more 2 of them out of HD-Library-Preferences, without any effect, so put them back. I find the Preference Panes in System-Library-PreferencePanes, but didn't see anything to do about that. The offending panes look like they're at least present.
    Is there something simple I'm missing? Can I get those panes back?
    Thank you.
    Charles

    Macbook pros need to be at least 2009 for 13" and 2007 for 15" and 17" to run Mavericks.  see system requiements.
    At this point, the easiest solution will be to make your backups current, then wipe the drive and do a clean install of the system. That means more work reinstalling the backed-up data (you only want to restore data and third-party apps, not any of the system components), but it makes sure you get a clean, working copy of the system.

  • In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs.  I believe this all has to do with this.  Any way to fix this issue?

    In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs.  I believe this all has to do with this.  Any way to fix this issue?

    The iTunes Store has no phone support and never has. Contacting them has always been via web form. Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Some system preferences panes won't open

    I just installed Mountain Lionon my iMac. When I try to open the System Preferences panes for Notifications; Security & Privacy; iCloud; Mail, Contacts & Calendars; and Desktop & Screen Saver though, I get the message
    To use the “[Name of pane]” preferences pane, System Preferences must quit and reopen.
    Selecting OK causes the System Preferences to disappear and then come back, but that same error message is still there. How do I get rid of it so I can acess those panes? Thanks!

    Yep:
    Go to Applications folder
    Select System Preferences
    Enter Command I
    Under General, deslect Open in 32-bit mode
    Then try to acess what you were trying to earlier.
    Good luck!

  • System preferences panes won't open in M.L.

    I just installed Mountain Lion on two machines, apparently with success. With a MBP, and only in one account, I can't open selected panels in system preferences panes: notifications, desktop and screensaver, security and privacy, date and time, dictation and speech, time machine, and startup disk. This issue is specific to my account. I've another account on this same machine and the preferences panes open and work. I've already done the permissions repair, used Disk Utility in Recovery mode, repaired the hard drive disk, and reinstalled Mountain Lion, all to no effect. On my iMac, all works well. Does anyone have an idea of what to do next?

    Right click on the System Preferences app in your Applications Folder. Select "get info" and make sure the 32 bit check box is NOT checked.

  • Security & Privacy System Preferences pane cannot open!

    my env:
    - Max OS X 10.7.3
    - 2.2 Ghz Intel Core i7
    this month , i can not enter Security & Privacy pane from System Preferences
    - when i click
    - pop alert windows, tell some error
    what can i do now?!

    that magic is:
    - my MacBookPro set up two user
    - in my user,  Security & Privacy System Preferences pane cannot open!
    - but switch another user ,
      open Security & Privacy System Preferences pane  is OK?!
    What make this happened?!

  • Epson scanner perfection 1670 is not detected on system preference pane

    It use to work but now it only produces blank grey scans.
    I have deinstalled and reinstalled new driver from Epson support site.
    I have also tried cleaning the USB connection with no results.
    I have noticed that when I tried connecting to the internet from the the scanner Help menu it tells me I am not connected (while I am) and I noticed also that the scanner is not detected on system preference pane.

    You can open System Profiler and under the Hardware heading you will see the USB entry. The printer should be listed under one of the USB busses. If you don't see it then the USB cable could be faulty or the printer itself could be cactus. So try another USB cable and in another port on the Mac. If the new cable and socket fails to make the printer appear in the USB view then the printer is the problem.
    If the printer is visible under one of the USB busses then this would indicate that the printer and the USB cable is okay. In this case the printer should be capable of being added in Print & Fax. But if you select to add the printer and it does not appear in the Default view of the Add Printer pane then try a reset of the printing system, as described next.
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse
    4. Click the "Reset printing system ..." popup
    5. Restart your Mac

  • Launching Acrobat 9 from system preference pane

    How do you launch new Acrobat 9 from System Preference pane? Message comes up "FMCore stopped. Start from System Preference pane, then relaunch. Illustrator does the same thing.

    Update your Extensis Suitcase with the latest version. Check on their website. It's not an Acrobat or Illustrator problem.

  • ICloud system preference pane

    MacBook OS 10.7.4. The iCloud system preference pane does not open to the settings options - it directs me to Find my iPhone. Settings appear as expected on my iPhone.  My iCloud account is available on iCloud.com. Any suggestions?

    I'm not really sure what it is that you are asking, but in case it is relevant, you cannot access iCloud.com from an iOS device. Any iCloud data you wish to access on an iOS device, should be accessed through the appropriate app, such as calendar, contacts etc.

  • System preferences  pane locked open

    System preferences pane "busy and can't be closed" for 36 hours processing my command to delete a User Account. help!

    Thanks for responding, Eric. The reboot freed up System Preferences.
    I wasn't sure anyone looked in Maverick anymore. Thanks

  • Sent Classic to the Trash-Damaged OSX System Preferences Pane

    I decided to delete Classic as I no longer use it. Using Spotlight I identified various Classic files and folders and deleted them.
    One of them must have belonged to the OSX System Preferences pane, as the Classic Preferences icon has now disappeared.
    Can I get this back? If I need to reinstall Classic later I assume I shall need it
    iBookG4   Mac OS X (10.4.7)  

    That's normal, isn't it? The Classic icon only appeared in my Sys Pref panel after I accidentally clicked on a OS9 application. (Started out with 10.4.4 on my mini).
    I am reasonably sure should you attempt to start a Classic app, the icon in your Sys Pref panel will re-appear as well.

  • System Preferences panes unresponsive!

    Hello,
    I've been on all day trying to figure out what is wrong with my mum's Mac Mini (running 10.7.5). System preference panes are unresponsive, showing only "Loading Displays..."/"Loading sound..." etc, at the top of the window, and nothing happens.
    I've been online and looked at everything that everyone else has tried: deleting the com.apple.systempreferences.plist thing; restarting in safe mode to remove login items (the system preferences panes don't work in safe mode either...); and downloading the latest (10.7.5) Combo Update to reinstall over what might be a bugged original update, but it won't allow me to install it, saying "the disk does not meet the requirements".
    So... I'm quite confused, and at the moment it's looking like the only option is to reinstall Lion. Someone please tell me this isn't the case!
    Thanks!

    Ok this is what I get when I open system preferences and click on a pane (in this case, it was the "Displays" pane):
    05/11/2012 16:43:02.128 System Preferences  +[NSPrefCrossFadeView createCGImageOfView:rect:superview:windowRect:]: unrecognized selector sent to class 0x10f3ae570
    05/11/2012 16:43:02.177 System Preferences  +[NSPrefCrossFadeView createCGImageOfView:rect:superview:windowRect:]: unrecognized selector sent to class 0x10f3ae570
    05/11/2012 16:43:02.255 System Preferences  (
                0   CoreFoundation                  0x000000010f69afc6 __exceptionPreprocess + 198
                1   libobjc.A.dylib                    0x000000010f50fd5e objc_exception_throw + 43
                2   CoreFoundation                    0x000000010f7271ee +[NSObject doesNotRecognizeSelector:] + 190
                3   CoreFoundation                      0x000000010f687e73 ___forwarding___ + 371
                4   CoreFoundation                      0x000000010f687c88 _CF_forwarding_prep_0 + 232
                5   System Preferences                  0x000000010eea3383 System Preferences + 37763
                6   System Preferences                  0x000000010eea1d32 System Preferences + 32050
                7   Foundation                          0x000000010f92b1aa __NSFireDelayedPerform + 392
                8   CoreFoundation                    0x000000010f64fc24 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
                9   CoreFoundation                      0x000000010f64f776 __CFRunLoopDoTimer + 534
                10  CoreFoundation                      0x000000010f630001 __CFRunLoopRun + 1617
                11  CoreFoundation                      0x000000010f62f676 CFRunLoopRunSpecific + 230
                12  HIToolbox                           0x000000011181d2bf RunCurrentEventLoopInMode + 277
                13  HIToolbox                           0x00000001118244bf ReceiveNextEventCommon + 181
                14  HIToolbox                           0x00000001118243fa BlockUntilNextEventMatchingListInMode + 62
                15  AppKit 0x000000010fe26779 _DPSNextEvent + 659
                16  AppKit 0x000000010fe2607d -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
                17  AppKit 0x000000010fe229b9 -[NSApplication run] + 470
                18  AppKit 0x000000011009eeac NSApplicationMain + 867
                19  System Preferences                  0x000000010ee9bb30 System Preferences + 6960
                20  ??? 0x0000000000000002 0x0 + 2
    In the "others" section of system preferences I have Flash Player, Perian, and Flip4MacWMV (which I'd like to get rid of but don't know how...)

Maybe you are looking for

  • How do I add a pdf or jpeg of my company logo to my signature on emails?

    How do I add a pdf or jpeg of my company logo to my signature on emails I send from my iPad2?

  • Error when using running total variable in formula

    This is probably an easy syntax problem, but I'm fairly new to Crystal reporting.  I created a running total variable (count) called InquiryTypeSubtotal that simply counts the number of records.  I have one grouping level, and in the group footer I'd

  • I think my hard drive is....DEAD

    I have an ibook G4 and the hard drive makes a very loud clicking noise, when i turn it on, the chime comes on and sometimes there is a ? mark, but sometimes it boots, but when it does almost every move of the mouse results in the beach ball. are ther

  • Site not accessable in VRF

    Hi, I have a L3 VPN customer, in my MPLS network who works in a MESH topolgy.Customer is connected to PE on a E1 link. I am finding a problem with one location of the customer. Below is the problem statement and work around done. 1. Customer is not a

  • Where to find the doc for Oracle server security

    I am preparing for Oracle 9i upgrade OCP and looking for the document which talks about Oracle server security which includes Application context, Security Role and etc. Thanks