System preferences won't work
only opens to auto fill
HI,
Try troubleshooting the Safari .plist file.
Quit Safari (Command + Q) Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Launch Safari. Go to Safari / Preferences or Command , (comma) on your keyboard. If the Safari pref pane renders correctly, move that .plist file to the Trash.
Carolyn
Similar Messages
-
Mac Sleep Timer (through 'Energy Saver' in System Preferences) won't work
Hello,
I have a MacBook (13-inch, Mid 2009) running Mac OS X Snow Leopard 10.6.3,
and it has been installed with the latest software updates possible.
(The latest update is the 'Security Update 2010-003')
Previously I was using Mac OS X Leopard 10.5 on my MacBook,
and I can vaguely remember the timed computer sleep through Energy Saver would work.
That is, when the counter's time matches the amount of time I specified (e.g. 10 minutes), the computer enters sleep mode and displays a pulsing power light.
After upgrading to Snow Leopard I can barely remember the scheduled computer sleep will work as I don't really notice how it sleeps / I will shut down my MacBook before I go to bed.
==========
However, last night I was really tired and slept in front of my MacBook unconsciously.
When I woke up, I found that my MacBook didn't display a pulsing power light but a continuously-growing power light.
I tapped the trackpad and the display turned on, so I knew that my MacBook didn't go to sleep a whole night.
*What that means is that the Sleep Timer (through 'Energy Saver' in System Preferences) won't work.*
But the timed display sleep DOES work.
==========
After spending a whole day Googling,
I found that there are plenty of people suffering the same problem as me, although their Macs and OSs vary.
I also found an official support page from Apple concerning the related issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
I tried the following methods but still can't resolve the problem:
_- boot my MacBook in safe mode_
_- use the 'Disk Utility' to repair Disk Permissions through booting my MacBook from the Mac OS X Snow Leopard Installation DVD_
_- reset NVRAM (Intel-based) (as PRAM is used by PowerPC-based Macs)_
_- reset SMC (System Management Controller)_
NONE of the above-mentioned methods can resolve the problem.
Althought I am sure that the Spotlight isn't indexing the hard drive, and I just start my computer and do nothing and wait for the scheduled computer sleep, the scheduled computer sleep just won't work.
In the other Mac forum, I saw someone suggest installing an application called PleaseSleep:
http://www.dragonone.com/products/macosx/pleasesleep/
It works.
But I really want to find out what caused this problem as this is a function shipped with Mac which is expected to work normally.
What's more, Apple is claiming to be a green Apple, right?
==========
Here's the log taken from 'Console':
- Sleep by closing the lid of my MacBook:
Apr 18 13:21:05 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:21:05 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:21:07 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:23:21.028 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:1.618421972
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:23:21.579 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:2.169138968
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Clamshell Sleep
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - EC LID0
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:23:23 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually clicking the Apple logo in the upper left corner of the screen -> 'Sleep':
Apr 18 13:31:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:31:46 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:31:49 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:32:04.033 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.313067079
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:32:04.589 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.869303048
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:32:06 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually pressing control + eject, and the press 'Sleep':
Apr 18 13:34:17 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:34:17 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:34:46.080 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.360466003
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:34:46.564 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.844347000
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 566 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 567 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:34:48 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by _turning on the application called 'PleaseSleep' based on the settings from 'Energy Saver'_:
Apr 18 13:37:22 Michael-Leungs-MacBook PleaseSleep[288]: Application is enabled
Apr 18 13:37:29 Michael-Leungs-MacBook System Preferences[1136]: * AGCAttach() failed
Apr 18 13:37:31 Michael-Leungs-MacBook [0x0-0x58058].com.apple.systempreferences[1136]: Couldn't find any matches.
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Checking sleep conditions...
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Going to sleep...
Apr 18 13:38:23 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:38:56.042 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.321902931
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:38:56.571 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.850627959
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 707 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 708 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:38:58 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- If I disable 'PleaseSleep' and only depend on the non-working 'Energy Saver', nothing happens.
==========
Looking forward to your replies! Thanks in advance!Found this discussion by googling "com.apple.systempreferencescouldn't find any matches"...
One month ago I bought a brand new Macbook Pro 13", and after a couple of weeks I realized it wasn't sleeping on its own when it should, per the system preferences. (I did sleep when I chose "Sleep" in the menus or closed it... It just wouldn't sleep on its own, while open.) What was extra frustrating was that it was intermittent... It would sleep on its own maybe 1/3 of the time, but other times it would NEVER go to sleep. I deleted PowerManagement.plist, reset the SMC, etc... No luck.
I took it to the "geniuses" at the Apple Store, and the guy took all of five minutes trying to diagnose the problem. When my MBP wouldn't sleep on its own, he promptly replaced it with a new one. That was nice, but I actually would have preferred that he diagnosed and fixed it. (I think the store was so swamped with people coming in for service that day that they were doing anything they could to close cases and get customers out of there ASAP.)
Now, sitting here with my 48-hour-old MBP, I still have the problem. The other one was so new that I had barely put anything on it yet. The only applications I had put on it were MS Office for Mac 2011, Firefox, Chrome, and Adobe Flash Player. I've put Office and Flash Player on this one, but not yet Firefox or Chrome. That's it. No other customization or fancy business.
I looked into the Console just now, and I see the "Couldn'tfind any matches" entry popping up again and again. The last three seemed to pop upright around the time when my MBP should have gone to sleep on its own, but not down to the second, so it's hard to definitively point at that and say it's it for sure.
They need to fix this!! -
The only thing I can think that I've done differently is that I'd downloaded a scanner driver from Canon. Everything worked fine for days after that. It wasn't until I shut down the computer and restarted it that I keep getting these prompts to enter keychain passwords and it rejects the only passwords I've ever used. No idea what to do. Any help would be greatly appreciated! :-)
I just found the fix in another post! Here it is, in case anyone has the same issue...
http://support.apple.com/kb/TS5362 -
Many of my System preferences won't load in mavericks?
Since updating to 10.9 many of my system preferences won´t load. These are:
- Security: You can’t open Security & Privacy preferences because it doesn’t work on an Intel-based Mac.
- Notifications: Could not load Notifications preference pane.
- Printers & Scanners: Could not load Printers & Scanners preference pane.
- iCloud: Could not load iCloud preference pane.
- Internet accounts: Could not load Internet Accounts preference pane.
- Networks: Could not load Network preference pane.
- Sharing: You can’t open Sharing preferences because it doesn’t work on an Intel-based Mac.
- Users & Groups: You can’t open Users & Groups preferences because it doesn’t work on an Intel-based Mac.
- Parental Controls: Could not load Parental Controls preference pane.
- Date & Time: You can’t open Date & Time preferences because it doesn’t work on an Intel-based Mac.
Any hints on a solution are greatly appreciated!
Best regards, MikkelTo further explain:
I didn't need to locate any invisible files in my case. I discovered that I had 4 versions of the System Preferences application on my computer. (The System Preference applicatioin is what loads the preference pains when you seledt System Preferences.) I merely searched for "System Preferences" in spotlight. Spotlight located 4 different versions of the System Preferences application. Some of those versions apparently tied to preference panes that used the old 32 bit encoding from the non Intel processor days. When I clicked on the System Preferences under the Apple menue it was apparently pulling up an old version of the System Preferences applicatioin instead of the correct one in the main Applications folder. I also noted that if I clicked on System Preferernces in the dock or directly in the the Applications folder, I would not have the problem of some of the preference panes not able to be viewed because of the " "it doesn’t work on an Intel-based Mac" message. So I surmised that the correct System Preferences application was in the Applications Folder on the top level of the drive directory like it was supposed to be but that when I clicked on System Preferences from the Apple menue it was loading one of the 3 old System Preferences applications that were buried elsewhere on my hard drive. If you find you have more than one System Preferences application on your hard drive you need to trash the other System Preferences Applications. Before trashing the duplicates, you should test the one in the main Applications folder by directly double clicking it and make sure all the preference panes in it work properly then trash the duplicate System Preferences applications you found in spotlight.
You may also find like I did, that you not only have duplicates of the System Preferences on your hard drive but also several old duplicates of the entire Applications folder buried on your hard drive. if that is the case you should compare each folder and make sure there is nothing in the old duplicate Applications folders you still need. You will probably find that all of the latest versions of your applications are in the main Applications folder where they should be. If so then trash all the old duplicate Applications folders as well. Keep only the main Applications folder on the top level of the hard drive.
Trashing all these extra old Applications folders that held old duplicates of all my applications in them on my hard drive solved a bunch of other problems I was having with some of the applications as well.
For the technically minded: Why does this happen with Mavericks and not with Mountain Lion? I suspect that the old Applications folders and old duplicate System Sreferences applications didn't matter to Mountain Lion because it searched for the System Preference application under the Apple menu differently than Mavericks does. I believe Mountain Lion seached all the top levels of the Application folder before drilling down into any subfolders to find the System Preferences application. Mavericks apparently does it the opposite way. It searches the first subfolder in you Applications folder and drills all the way down in that subfolder first before going to the next subfolder and drilling down in that subfolder all the way to the bottom. So it searches all the subfolders before searching the main level of the Applications folder for System Preferences. Since my old duplicate System Preferences applications where in subfolders with titles that were earlier in the alphabet than the main System Preferences application it searched those subfolders first, found the old System Preferences application in the those earlier folders and loaded the old System Preferences first in the subfolders instead of the correct one further on in the main Applications folder. If any one else has a better idea let me know.
--Scott
micmac2105 wrote:
Hello,
have the same problem, however, I do not understand the hint for solving the problem.
How to show invisible files?
How to find applications/system preferences and call Get info from file menu?
Where are all these things, have never seen them before or heard of them.
Thanks for help
Michael
micmac2105 wrote:
Hello,
have the same problem, however, I do not understand the hint for solving the problem.
How to show invisible files?
How to find applications/system preferences and call Get info from file menu?
Where are all these things, have never seen them before or heard of them.
Thanks for help
Michael
micmac2105 wrote:
Hello,
have the same problem, however, I do not understand the hint for solving the problem.
How to show invisible files?
How to find applications/system preferences and call Get info from file menu?
Where are all these things, have never seen them before or heard of them.
Thanks for help
Michael -
My System Preferences won't let me open accounts?
My System Preferences won't let me open accounts? I really need it to work please help. Hugz and kissez Abbyxoxo1010
Hello Makena Little,
It sounds like you are unable to change your wallpaper background because that section of your System Preferences says that it is loading adn will not finish. I recommend performing a Safe Boot, then leaving it and retesting the issue:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Starting up in Safe Mode
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Systems preferences does not work
My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....
Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual -
My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?
Deleting the System Preference or other .plist file
..Step by Step to fix your Mac -
System preferences froze, stopped working
I was changing my wallpaper picture and the System Preferences just stopped working, I can't do anything in it now! How can I solve this problem?
Quit System Preferences if it's running. In the Finder, hold down the option key and select Go ▹ Library from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following item to the Desktop:
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item. -
Hi
I signed out from my icloud because wanted to change my maill address and password for it cause couldnt connect with my old password and mail acc i dont know why.But then realised that i will loose all my data...
Will i loose eveything i have saved now on my mac by signing out the icloud?
and is still 'signing out'...cant turn off my mac and 'system preferences' is still working..
Can i re instal it back?
Please advice what to do ....how to cancel signing out....turn off my mac...or re instal icloud...
Thank youI have the same problem. Unfortunately, the troubleshooting link you added has the first step listed as "Verify that FaceTime is enabled in FaceTime > Preferences" which we (the original poster and I) can't do as our Preferences are greyed out. We can't click on them to verify anything.
In FaceTime itself it's verified my apple id (also double checked via the site) and then it says the email is "verified" but then it freezes and after a minute or so it says "Could not verify the email address. Please check your network connection and try again."
After checking the network connection, it still doesn't work. It's rather frustrating as it all worked fine until about a week or two ago.
Any help would be appreciated.
-H -
Optic disc drive not working for picture cd's. System preferences won't let me change off ignore.
When I insert a picture cd, it just gets spit back out. When I check under system preferences, in the space asking what to do when a picture cd is inserted, it defaults to ignore and I can't change it. Any ideas on how to resolve this? DVD player works fine. Music cd's sometimes work. Thanks.
Catherine, welcome to the forum.
Yes, I can feel your irritation. I have been there many times myself. Therefore, the reason that help on the forum.
Have you tried this software to see if it will help you. I have never used it, but thought that it is worth a try.
If this doesn't work, your next stop may be with ASUS Tech Support. They know their products best and will possibly have a better understanding of your problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
"Accounts" in "System Preferences" won't open
I am trying to access the "Accounts" window in "System Preferences", but it won't open.
I am getting two messages:
"To use the "Accounts" preferences pane, System Preferences must quit and reopen."
I clicked on "Ok"
*Preferences Error*
Could not load Accounts preference pane.
I have restarted and shut down my MBP to see if that helped. Didn't work. What am I suppose to do?I have the same issue and I have tried everything. I really would love to resolve this System preference error as well! It will take me forever to reload all of my pro apps and even longer to restore my user settings. This almost makes backing up your data impossible if re-installing is the last option. I've tried restarted in safe mood. Trying different admin rights, trying to extract the corrupt files using pacifist, repairing disk, I've had this issue for months and I have had no luck with finding solution. Any one for more solution ideas?
I also came across this with working with Apple Remote Desktop! -
System Preferences won't save after change
Hello everyone,
I am running Mac OS 10.5.8 on a Black Macbook. The problem I am having is that none my changes will save in the system preferences. For example. I change the desktop background but the background won't change. The display window in the systems preferences window will show the picture I chose, but the desktop won't.
Another example: if I turn off "spaces" in systems preferences. It will show as off in the system preferences window, but as soon as I close the system preferences window, the changes won't take affect. This seems to happen with any change to settings in the system preferences.
I have recently used both "disk warrior" and Onyx to rebuild my desktop, check my drive and everything else those applications do. But still no change.
One more hint: I deleted an application (TomTom home) from my computer a few months ago, but the old icon shows up in the Dock as a "?" after each restart. I can drag it ot the desktop and delete it, but if I restart it will always show up.
What could be wrong? Should I do a reinstall? I don't have the disks...
Thanks Mac folks!Ok, I tried both removing the "com.apple.systempreference.plist" and restarting from both a Disk Warrior disk, and the Mac OS X Install CD 1 and doing a repair of the disk permissions. Neither of the tricks worked.
I no longer have a "com.apple.systempreference.plist" file anywhere on my computer and I still have the same problems.
So what should I do now? I have (obviously) found my original disks. I am thinking I need to do a new install of the system software? What is the process for doing that and not lose my data?
Thanks again for everybodies help.
Josh -
Google accounts are suddenly offline. Popup: "Google Password Required, Enter your password for ... in Internet Accounts." continues to System Preferences/Internet Accounts. Account window won't open. I just get the grey circling system-working-on-it icon. Suggestions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try to open the preference pane. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
My system preference is not working!!
I installed Magic Trackpad for my mouse a long time ago, and I recently deleted it. While I was following instructions, it said to delete a certain file in the system preference folder but then I deleted other things accidentally by dragging the folder. So I placed it back to where it belonged again and only delete the Magic Trackpad ones. But when I tried using system preference again, things started to look like this:
Some areas didn't seem to be working and only things like Displays or Desktop & Screen Saver were working.. Please help! Thank you very much!This may be one of the rare occasions when you should repair the permissions of the startup volume in Disk Utility. If it doesn't work, see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon, usually with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
System preferences is not working
The system preferences of my macbook Pro is not working. As soon as I launch the programm, this is all I see.
Is sombody able to help me? What I'v already tried to do is to reinstall O.S. Lion.Reinstalling OS X Lion won't work for something like this is because it's located in the Users folder.
Your System Preferences preference file has become corrupted and unable to save your changes.
Use the Finder Go menu and open the hidden folder
/Library/Preferences
and look for a file called
com.apple.systempreferences.plist
there wil be two of them, one you can move, move it to the Desktop and reboot, launch System Preferences and reset your preferences, delete the desktop file.
https://discussions.apple.com/docs/DOC-3046
Maybe you are looking for
-
SELECT-OPTIONS for variables that cannot have a range
Hi all, There is an option to show only one input-field for a select-options declaration by using the 'no intervals' option. But it is still possible for the user to specify ranges when doing multiple selections (i.e. specify intervals for the variab
-
PPV report or functional Specification
Dear Friends, I tried but did not find any standard Purchase Price variance report. My client's report requirement is : PO, Mateial, Std Price, Std Cost , Actual Price, Actual Qty, Actual Cost, Batch, Vendor.............. All information I collected
-
Why is the preview window for my timeline so pixilated?
why is the image in my preview window for my timeline so pixilated? im using a mac pro 16gb ram/ 6 core / firepro d300
-
Can't re-install acrobat 8. have disk and serial numbers, but won't re-install.
my system is windows XP. i installed acrobat 8. found it won't work with microsoft 2007. uninstalled the acrobat. uninstalled microsoft 2007. installed microsoft 2003. but can't install acrobat 8. i get error 1500.
-
Error 3194, this is happened after I downloaded the recent update. HELP please!
What is error 3194 and how do I fix it