System properties keep changing !!

After applying the latest service pack our System property 'user.dir'
keeps alternating between
e:\weblogic and e:\weblogic\bin each time we stop and restart the server
Does anyone have any clues on this behavior ?
thanks
Joe Ryan

See same pb in weblogic.support.install.
I don't have this pb on NT with WLS started as a service (user.dir =
v:\winnt\system32)
Joe Ryan wrote:
>
After applying the latest service pack our System property 'user.dir'
keeps alternating between
e:\weblogic and e:\weblogic\bin each time we stop and restart the server
Does anyone have any clues on this behavior ?
thanks
Joe Ryan

Similar Messages

Split Screen on 30" Display, changes in System pref keep changing

Hi,
This is my first time on this forum, so Hi to everyone out there.........!
Anyway,
I have a G4 with a 30" display, everytime I boot up the 30" display splits into 2 halfs, like a mirror of each other and the resolution is 1200 x 800. The only way to fix it is to reboot the PC and then I get the one size screen at full resolution.
I've gone into System Preferences and Displays and locked the configuration change heaps of times but it doesn't seem to stay locked as for some reason the config keeps changing.....
Please note, my laptop stays blank but I can drag screens from my display and make them display into my laptop which allows me to open heaps of sessions up between the two....
Does anyone have the same issues, or this this a first......?
All comments welcomed.
Thanks
Paul

Sorry, I have placed this in the incorrect forum....... I will close it from here and re-post it in the correct forum.
Ta
Paul

How to dynamically refresh system properties when changed

Hi All,
Through weblogic startup class I'm loading the properties from a properties file
into system properties, Now my requirement is to refresh those system properties
when ever I make changes to the properties.
Is there any way to achieve this functionality through MBeans.

Hello Lucky,
I believe you cannot refresh properties file dynamically using MBeans. What
you can do is write an MBean which necessrily mirror your property file and
register with MBeanServer. You can set values on the MBean dynamically but
in order to persist your changes you need to write your own persistance
mechanism.
Cheers
Ali
"Lucky" <[email protected]> wrote in message
news:3f84d68f$[email protected]..
>
Hi All,
Through weblogic startup class I'm loading the properties from aproperties file
into system properties, Now my requirement is to refresh those systemproperties
when ever I make changes to the properties.
Is there any way to achieve this functionality through MBeans.

System Center keeps changing Microsoft Updates to previous upstream server

1. Previously we configured the SCCM2012 R2 to talk to an upstream server which has now been decommissioned.
2. We did the following to tell the SCCM2012R2 to go to Microsoft Update for updates by
a. Clicking on Administration Workspace > Site Configuration > Servers and Site System Roles > Select the Primary Site Server> Clicked on the Home Ribbon > Configure Site Components> it shows that the SCCM2012 is configured to
Synchronize from Microsoft Update.
b. On the Windows Server Update Services, > Options > Update source, it is set to
wsus.instance.com
c. I changed it to Synchronize from Windows Update
About 1 hour later, in the WCM.log
This keeps appearing
Attempting connection to WSUS server: wsus.instance.com, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 11:11:47 AM 3392 (0x0D40)
Successfully connected to server: wsus.instance.com, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 11:11:48 AM 3392 (0x0D40)
Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 11:11:48 AM 3392 (0x0D40)
Successfully configured WSUS Server settings and Upstream Server to wsus.instance.com SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 11:11:50 AM 3392 (0x0D40)
e. Having checked on the Windows Server Update Services, > Options > Update source, it is set to
wsus.instance.com again
============================================================
Is there any problem with the following
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 8:11:47 AM 3392 (0x0D40)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 8:11:47 AM 3392 (0x0D40)
Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 8:11:47 AM 3392 (0x0D40)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 8:11:47 AM 3392 (0x0D40)
Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 8:11:47 AM 3392 (0x0D40)
Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 8:11:47 AM 3392 (0x0D40)
Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 4/8/2014 8:11:47 AM 3392 (0x0D40)
============================================================
We have uninstalled and reinstalled the SUP but the problem still persist, SCCM2012 keeps configuring the WSUS to talk to the upstream server, this resulted in we are unable to get the latest Endpoint definition updates to distribute to client computers.
Please advise, thank you

It sounds that you've been in the WSUS console before and configured it that way, but I'm only guessing here. In your case I'd uninstall the SUP and then remove the WSUS role from the server. Re-add the WSUS role and only perform the initial configuration.
Then install the SUP again and configure it from the ConfigMgr console only.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

Printer properties keeps changing 'Mirror Image' option to ON

I have Word 2003 SP3.
My multifunction printer is HP Officejet Pro L7700.
In printer properties - under the 'advanced' tab, I have 'Mirror Image' set
to OFF.
However, if I make a change under the 'features' tab in pinter properties,
the 'Mirror Image' will change to ON, without me wanting it to.
How can I keep this from happening?
Thank you,
Jamie
This question was solved.
View Solution.

Well, I tried this. As soon as i went into printing shortcuts and changed something, the Mirror Print went back to ON again.
Anyone else? Somehow, I believe this started happening when MS Service Pack 3 was installed.

System clock keeps changing on KT400 MS 6590

Hi Guys,
I'm not sure why but my system clock seems to change. The problem isn't every time I log into Windows XP but at random. If I restart then the clock goes to the correct time again. Is there any way of correcting this other than changing the times in Windows and the BIOS. I have also tried clearing the COMS, but this hasn't worked either.
Thanks for any help you can provide.
Richard.

99 percent of boards are a cr2032
any big chemist,camera shop,most corner shops
pop the old one out
there is a little tag
put new in make sure its same way round
you might find bios is reset and needs resetting

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
Thanks in advance.

1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
2. No; if you use an emulator, it may install system components. Back it up anyway.
(110033)

SCCM 2012 - Change Distribution Point's Site System Properties Site Code

Hello All,
I'm hoping someone can help me out. Here's what I have and here's what I'm trying to do.
SCCM 2012 R1
Each of our offices has a Windows 7 SP1 Ent PC that is a distribution point for that office's 10-20 machines. A number of these offices and their DPs were setup prior to me setting up a number of Secondary Site Servers. So right now, these DPs' site codes
are the primary site server's. I'd like to change these to one of the Secondary Site Servers.
When I go to the Site System properties of one of these Win7 distribution points, the Site Code is grayed out.
So, the question is, how can I change one of these DPs' site codes?
Thanks in advance to whomever helps!!
Bill

That's a strange reason for using Secondary Sites. How many clients are you managing? Have you good WAN links?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Where can I change the System properties permanently

Instead of
System.setProperty("name","new-value");
to change the system properties in run-time.
How can I change it in a config file? Where is it?
Thx.

Hai,
We can't directly set the system properties values using config/properties file. But, if you wish to use Spring framework, there is an option to load system properties through a config file.
Regards,
Loga

Configure TCP/IP system properties with java

I'm looking to do is to be able to set my TCP/IP properties using java every time I switch physical networks so that it is configured properly. One network automatically gives an IP while the other requires a static one. I'd rather not have to keep typing it in everytime so I'm looking for a way to automatically change it.
I'm thinking that the route to go would be through the java.lang.system to get the system properites but that'll only get me the os name and version stuff.
Any ideas?

I believe this will require native functionality. Each OS handles the specification of TCP/IP information differently. Getting the system properties is not going to help. The only way I can imagine doing this is to create a set of Java classes which provide a platform-independent abstraction for changing TCP/IP information and then use JNI to implement the natvie code for each platform you want to support.
Jitender - [email protected]

System Properties user.timzone different between dev. and prod. system

Hi all,
I am facing the following issue:
In our development system I get in http://<server:port>/sap/monitoring/SystemProperties -> dispatcher -> system properties a Europe/Berlin for user.timezone.
In our productive system I get in http://<server:port>/sap/monitoring/SystemProperties -> dispatcher -> system properties a GMT for user.timezone.
Can anybody explain which system property is requested by the J2EE-engine when calling this property?
I ask, because I wrote a small programm requesting the user.property via java (expecting j2ee-engine would do that too) an got back an empty string (on both systems).
So, how/where can I change the parameter, so that the development system uses GMT, too?
I already checked the spro settings in sap, they are identical. System -> status showes the same for both systems, too.
I hope for your help.
Thanks and regards
Christian

Hello Chris,
I checked the system variables with TA SM51 ->goto -> server -> information -> environment.
There is nothing like the TZ variable on both systems (we use Linux).
Do you have an other idea?
How can I change the user.timezone shown in Java system properties?
Regards
Christian

Safari 5.1.2 keeps changing text field randomly on text input

Hello everybody.
Safari keeps changing the text field on input, do you know how to correct this issue?
Here is an example:
Let's say I load www.google.com, it appears in the safari window as usual.
Suppose I begin to type a search in the google search field at the top right of the safari window (not the one on the google page)
if when doing this the sentence is long for the search, at some point randomly, the rest of the text will be entered this time in the google search text field on the google page! (which is the very next text field) So when I hit enter it makes google search half of my request...
Safari changed the text field I was into with no warning. I want to say I do not press tab at any moment.
This is annoying really, and this does not appear anywhere else than in Safari. It seems the issue is not systematic, but appears quite often.
I have no universal access setting except "enable access for assistive device"
I had to check this box upon installing a software in the past but I can't remember what it was.
Perhaps the problem I have is linked to some window refreshing?
Thank you for your suggestions or help
Mac Pro, 10.6.8

Try deleting the cache associated with Safari ...
Quit Safari.
Go to ~/Library/Caches/com.apple.Safari/Cache.db.
Move the Cache.db file to the Trash.
Relaunch Safari to test.
I had to check this box upon installing a software in the past but I can't remember what it was.
Open System Preferences > Universal Access
Make sure the box next to: Enable access for aassitive devices is deselected.

[8.1 pro update1] Windows KEEPS changing and reinstalling keyboard layouts regardsless of IgnoreRemoteKeyboardLayout

Windows 8.1 is driving me nuts beyond believe once again. I have 8.1 Pro update 1 English, installed from the VLK iso from our Volume License / SPLA account. As we are a Dutch company, the Location is set to The Netherlands, as well as the date/time format.
Therefore in my keyboard settings the language is Dutch (NL) but I set my keyboard layout to US, as below:
As you can see there are no other languages our installed. This worked for years with Windows 7 and before with XP. Windows 8.1 however KEEPS changing my keyboard layout to plain Dutch making my keyboard unusable. The language bar in the systemtray, or whatever
it's called in this OS, shows THREE layouts, which are actually 'selectable' and work as if they were installed. However, they are not 'really' installed, as per the screenshots above.
This is driving me completely mad. Why on earth is Windows making descisions for me which I should be making myself? In addition, in my oppinion Windows should NEVER change somthing as trivial as a keyboard layout by itself. People don't change switch keyboard
even when logging on to a remote system that has a different layout configured. Whoever came up with this 'automatic switching per application' idea once again had no clue of real-life usage at all.
I've added those two languages I do NOT want to my keyboard layouts and removed them. Sure they are gone then, and as only language NLD with layout US is left, the language bar in systray is gone as well. After a few days all three are back, and my keyboard
is producing wrong characters again.
I've tried with regvalue HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout\IgnoreRemoteKeyboardLayout set to 1, to no avail at all. It just keeps changing. This should help to prevent my keyboard when changing when I RDP to one of my servers.
The advanced settings in Language don't help either:
'let me set a different input language for each app window' is unticked.
Override for default keyboard is now set to Dutch - US, like I want it. Doesn't help either.
I cannot reproduce it on demand, settings do NOT change when connecting to my RDP server(s). They do NOT change when I open any of my used programs, being IE, Chrome, CMD.exe, notepad and a few others. It shouldn't either as I disabled the 'keep settings
per application'.
I have changed the keyboard shortcut from alt-shift or whatever it was to 'none'.
How to prevent Windows 8.1 completely from changing the keyboard layout I use? Is there any way to check WHY or WHAT actually changes my keyboard?

This might be really late to this post but I've been having this issue while playing games, particularly those which are complex enough to require Control, Alt, Shift. At first like some people here suggested
Windows Key + Space was the cause, but even after removing all alternate layouts (for reference, I want the UK layout, but it was switching to the US Layout) it was persisting.
This post pointed me in the right direction, go into your Language Options
> Change Override (Advanced). At this stage I've noticed there is the Switching input methods section, look for
Change language bar hot keys and here I fount Alt + Shift
was being used for switching Between input languages - a key combo I'd probably hit quite often just purely by accident. You can change the key sequence to no binds.
I haven't fully tested it, but it appears to be working for now - and I hope its an extra option for people to look at if they're running into this issue.

Why do the Search Engine options keep changing back?

Hi, I have a large collection of search engines, which I keep well organized with the addon Organize Search Engines.
https://addons.mozilla.org/en-US/firefox/addon/organize-search-engines/
I needed to make changes to many of the search engines I've added to make them work. i.e. I had to go to Manage Search Engines, right-click on the relevant engine and choose properties to change its options (just right-clicking "Add To Search Bar" on a search box won't work on a lot of web sites unless you modify the options/settings).
Anyway, the problem seems to be that after a few firefox restarts, the modified search engines seem to revert to their default values. Confusingly, it doesn't happen to all of them. Just ones I've recently added.
I've toggled the Automatically Update Search Engines in Firefox's Advanced options or the Show Search suggestions in Manage Search Engines.
I've tried re-installing firefox and putting in the new profile and re-installing the addons I use individually (although I had to copy over the extensions folder to my new profile). It didn't seem to help.
Help a brother out.

Hello  ,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
WARNING:Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be easily recovered unless they have been backed up to an external device! See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

Name of computer keeps changing to My ***** (2)

I have changed the name of my computer 8 times today in settings/sharing to remove the (2) after the computer name. The last time I changed it and before I could do anything the name changed! After putting the name back, the computer will again show up in the shared computer area of the finder
There are some apps that won't sync unless the computer name is correct.
What is causing the computer name to keep changing? It used to happen occasionally, this many times times in one day is absurd! It just changed again while I was typing this question.

There are several possible causes for this behavior.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local". Resolve the name conflict by renaming one or more of them in the Sharing preference pane.
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is a bug in OS X that may only affect some models. You can avoid it as follows:
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
          Wake for Wi-Fi network access
if it's checked.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. If the router is an Apple device, it may need to be restarted.
7. A third-party Bonjour device on the network is malfunctioning. Finding out which is a process of elimination.
8. There is more than one DHCP server on the network. Typically, there would be two or more wireless access points configured to act as routers.
9. See this support article.
10. Back up all data. Make notes of your settings in the Network preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
          Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
Restart the computer and empty the Trash. You will need to recreate the network settings.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

System properties keep changing !!

Similar Messages

Maybe you are looking for