System re-booted  while installing grid infrastructure software(11 gr2)

Good day,
While installing grid infrastructure software(11 gr2) for two node cluster on Redhat 5.4, the system re-booted i.e.node 1
just after the completion of running root.sh file on node 2.
My question is how to resume installation again.
Thanks
Ans

Ansh wrote:
Good day,
While installing grid infrastructure software(11 gr2) for two node cluster on Redhat 5.4, the system re-booted i.e.node 1
just after the completion of running root.sh file on node 2.
My question is how to resume installation again.
Thanks
Ans
Hi,
Check if $GRID_HOME/cfgtoollogs/configToolAllCommands exist, if the file is there then as grid user execute the script
but to be safe and have clean installation I would deinstall it and re-run the installation
Cheers

Similar Messages

  • Creating ASM after installing grid infrastructure software only option

    OS environment is Solaris 10 sparc (64 bit) with suncluster 3.2. Oracle version is 11.2.0.3.0... ASM configuration also..
    Grid binaries (i.e. GRID_HOME) will be placed in local disk on both the nodes. Oracle Binaries (ORACLE_HOME) also will be placed in local disk on both the nodes..Oracle database only will be placed in shared storage with ASM...
    My doubt is If i select "install grid infrastructure software only" option, can i create separate ASM instance on each node by using "$GRID_HOME/dbs/initSID.ora" file of each node?
    Is it possible to create two ASM instance in the clustered environment since Single instance Oracle ASM is not supported with Oracle 11g release 2 as per "Oracle® Solaris Cluster Data Service for Oracle Guide"?
    Please tell me the suggestion if anyone knows........
    Thanks & Regards
    Ramesh M

    Hi,
    First of all "software only installation" only places the binaries onto the local disks. This software only binaries later have to be configured either for GI Standalone Server or GI for Cluster environment. It differs in the root.sh script to be called, and in the need to use config.sh to configure the cluster environment.
    So by configuring standalone server GI later, you will only have a local ASM installation.
    However you will not end up with a initSID.ora file for the ASM instance, since the spfile of the ASM instance will always be placed inside the first ASM diskgroup to be configured. (the same for GI cluster, as for GI SI).
    Now creating clustered ASM and SI ASM => you can only create clustered ASM for nodes which participate in the same cluster. So if you configured both nodes with clustered GI, but did not tell them to be 1 cluster, but 2, then both ASM instances will be separate. Resulting in beeing ASM1 instance on both nodes, and not able to mount the same diskgroup (consistent of the same disks) on both servers at the same time. So in the end having 2 clusteres consisting of one node each, does not really differ much from the ASM point of view, other than having ASM1 as instance name instead of +ASM (in GI SI). The difference is in the cluster stack below ASM, which simply has more processes and requirement for the clustered GI version.
    And last but not least, yes you can have separate ASM instances on 2 separate nodes. If they are not part of the same cluster, the ASM instances are independent.
    They are not really single instances, since they know that they are RAC ASMs, however they do not communicate with other nodes. However you may only have one ASM instance on each host (either physical or virtual host, as you can have an ASM instance in each solaris container).
    Hope that clarifies it.
    Regards
    Sebastian

  • Grid infrastructure software-only mode

    Hi all,
    What are the differences between those different installation mode for the Grid infrastructure ?
    Install and configure grid for a cluster.
    Install and configure grid infrastructure for standalone software
    Install grid infrastructure software only.
    Thanks

    user9198889 wrote:
    What are the differences between those different installation mode for the Grid infrastructure ?
    Install and configure grid for a cluster.This is to install the software and configure (run the configuration assistants) to support Oracle Cluster (RAC)
    Install and configure grid infrastructure for standalone softwareThis is to install the software and configure (run the configuration assistants) to support Oracle Restart (non-RAC)
    Install grid infrastructure software only.This is to install the software but not configure (not run the configuration assistants)
    >
    ThanksRead about it at http://download.oracle.com/docs/cd/E11882_01/install.112/e10812/toc.htm

  • While installing grid software in rac in vmware we got the below error, failed to start the Clusterware

    hi,
    this is malli,
    i got below error while installing grid software in rac.
    os versin redhat 11inux 5.5
    oracle 11gr2 cluster rac
    thanks in advance....please do needful
    Failed to start the Clusterware. Last 20 lines of the alert log follow:
    2014-12-24 01:05:40.100
    [client(3850)]CRS-2101:The OLR was formatted using version 3.
    2014-12-24 01:05:41.923
    [client(3852)]CRS-2317:Fatal error: cannot get local GPnP security keys (wallet).
    2014-12-24 01:05:41.923
    [client(3852)]CRS-2316:Fatal error: cannot initialize GPnP, CLSGPNP_ERR (Generic GPnP error).
    2014-12-24 01:05:41.954
    [client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.

    [client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.
    Have you looked in this log file to see why the OCR is inaccessible? Have you looked in the ASM instance's alert log for other clues?
    Cheers,
    Brian

  • Install grid infrastructure fails due to oracle net configuration a failure

    hello guys,
    I installed software only then tried to install grid infrastructure standalone server along with ASM then i got an error
    [main] [ 2010-10-16 05:13:15.094 EET ] [RuntimeExec.runCommand:164] CRS-212: Resource 'ora.crsd' is not registered.
    [main] [ 2010-10-16 05:13:15.095 EET ] [RuntimeExec.runCommand:170] RunTimeExec: error>
    [main] [ 2010-10-16 05:13:15.097 EET ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
    [main] [ 2010-10-16 05:13:15.104 EET ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /oracle/app/oracle
    [main] [ 2010-10-16 05:13:15.284 EET ] [EndpointsImpl.<init>:276] Get listener endpoints from TCP:1521
    [main] [ 2010-10-16 05:13:15.286 EET ] [EndpointsImpl.<init>:302] Token count is 1
    [main] [ 2010-10-16 05:13:15.312 EET ] [EndpointsImpl.<init>:324] LsnrProtocol type = TCP, values = 1521
    [main] [ 2010-10-16 05:13:15.318 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:86] Calling parseInt to check 1521
    [main] [ 2010-10-16 05:13:15.319 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:97] Get port number 1521
    [main] [ 2010-10-16 05:13:15.469 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
    [main] [ 2010-10-16 05:13:15.471 EET ] [Version.isPre:285] isPre.java: Returning FALSE
    [main] [ 2010-10-16 05:13:15.472 EET ] [OCR.loadLibrary:308]
    Inside constructor of OCR
    [main] [ 2010-10-16 05:13:15.482 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
    [main] [ 2010-10-16 05:13:15.486 EET ] [OCR.isCluster:943] OCR Result status = true
    [main] [ 2010-10-16 05:13:15.487 EET ] [OCR.isCluster:955] Bolean result = false
    [main] [ 2010-10-16 05:13:15.505 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
    [main] [ 2010-10-16 05:13:15.527 EET ] [Version.isPre:285] isPre.java: Returning FALSE
    [main] [ 2010-10-16 05:13:15.530 EET ] [OCR.loadLibrary:308]
    Inside constructor of OCR
    [main] [ 2010-10-16 05:13:15.533 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
    [main] [ 2010-10-16 05:13:15.535 EET ] [OCR.isCluster:943] OCR Result status = true
    [main] [ 2010-10-16 05:13:15.536 EET ] [OCR.isCluster:955] Bolean result = false
    [main] [ 2010-10-16 05:13:15.581 EET ] [HASContext.<init>:100] moduleInit = 67
    [main] [ 2010-10-16 05:13:15.583 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
    [main] [ 2010-10-16 05:13:15.590 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
    [main] [ 2010-10-16 05:13:15.591 EET ] [Library.load:254] Loading library /oracle/app/oracle/product/11.2.0/grid/lib/libsrvmhas11.so
    [main] [ 2010-10-16 05:13:15.967 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
    [main] [ 2010-10-16 05:13:16.020 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
    [main] [ 2010-10-16 05:13:16.099 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
    [main] [ 2010-10-16 05:13:16.101 EET ] [Version.isPre:285] isPre.java: Returning FALSE
    [main] [ 2010-10-16 05:13:16.102 EET ] [OCR.loadLibrary:308]
    Inside constructor of OCR
    [main] [ 2010-10-16 05:13:16.103 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
    [main] [ 2010-10-16 05:13:16.108 EET ] [OCR.isCluster:943] OCR Result status = true
    [main] [ 2010-10-16 05:13:16.109 EET ] [OCR.isCluster:955] Bolean result = false
    [main] [ 2010-10-16 05:16:25.268 EET ] [PortAvailableCommand.execute:198] Port 1521 is available on node primary.localdomain
    [main] [ 2010-10-16 05:16:25.297 EET ] [NodeAppsFactoryImpl.checkPortHelper:1525] port=1521 availability status=true across nodeList=local node
    [main] [ 2010-10-16 05:16:25.848 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
    [main] [ 2010-10-16 05:16:25.861 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:26.028 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
    [main] [ 2010-10-16 05:16:26.038 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:26.222 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
    [main] [ 2010-10-16 05:16:26.231 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:26.246 EET ] [CRSNative.register:1133] About to register: name: ora.local_resource.type, type: 2, update: false, force: false
    [main] [ 2010-10-16 05:16:26.384 EET ] [CRSNative.register:1141] Name: 'ALIAS_NAME', Value: ''
    [main] [ 2010-10-16 05:16:26.413 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'local_resource'
    [main] [ 2010-10-16 05:16:26.421 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Oracle Local Resource'
    [main] [ 2010-10-16 05:16:26.427 EET ] [CRSNative.register:1141] Name: 'RESTART_ATTEMPTS', Value: '5'
    [main] [ 2010-10-16 05:16:26.434 EET ] [CRSNative.register:1141] Name: 'UPTIME_THRESHOLD', Value: '1d'
    [main] [ 2010-10-16 05:16:26.441 EET ] [CRSNative.register:1141] Name: 'AUTO_START', Value: 'restore'
    [main] [ 2010-10-16 05:16:26.517 EET ] [CRSNative.register:1141] Name: 'ENABLED', Value: '1'
    [main] [ 2010-10-16 05:16:26.531 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: ''
    [main] [ 2010-10-16 05:16:26.544 EET ] [CRSNative.register:1141] Name: 'NLS_LANG', Value: ''
    [main] [ 2010-10-16 05:16:26.552 EET ] [CRSNative.register:1141] Name: 'USR_ORA_ENV', Value: ''
    [main] [ 2010-10-16 05:16:26.559 EET ] [CRSNative.register:1141] Name: 'START_DEPENDENCIES', Value: ''
    [main] [ 2010-10-16 05:16:26.595 EET ] [CRSNative.register:1141] Name: 'STOP_DEPENDENCIES', Value: ''
    [main] [ 2010-10-16 05:16:27.340 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute ENABLED to type STRING.
    [main] [ 2010-10-16 05:16:27.357 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute RESTART_ATTEMPTS to type STRING.
    [main] [ 2010-10-16 05:16:28.400 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
    [main] [ 2010-10-16 05:16:28.419 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:28.431 EET ] [CRSNative.register:1133] About to register: name: ora.listener.type, type: 2, update: false, force: false
    [main] [ 2010-10-16 05:16:28.440 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'ora.local_resource.type'
    [main] [ 2010-10-16 05:16:28.448 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
    [main] [ 2010-10-16 05:16:28.457 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
    [main] [ 2010-10-16 05:16:28.486 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
    [main] [ 2010-10-16 05:16:28.495 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
    [main] [ 2010-10-16 05:16:28.505 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
    [main] [ 2010-10-16 05:16:28.513 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
    [main] [ 2010-10-16 05:16:28.568 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
    [main] [ 2010-10-16 05:16:28.577 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
    [main] [ 2010-10-16 05:16:28.713 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
    [main] [ 2010-10-16 05:16:28.890 EET ] [CRSNativeResult.addLine:106] callback: ora.listener.type true CRS-2618: Cannot change data type INT of existing attribute START_TIMEOUT to type STRING.
    [main] [ 2010-10-16 05:16:29.688 EET ] [Util.<init>:86] Util Instance created.
    [main] [ 2010-10-16 05:16:29.816 EET ] [HASContext.getCRSHome:507] /oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.821 EET ] [Util.getCRSHome:542] getCRSHome: ret=/oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.834 EET ] [ListenerImpl.getOracleHomeVal:1323] crshome is /oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.839 EET ] [ListenerImpl.getOracleHomeVal:1324] oraclehome is /oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.845 EET ] [ListenerImpl.create:534] Creating Resource
    [main] [ 2010-10-16 05:16:30.290 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
    [main] [ 2010-10-16 05:16:30.302 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
    [main] [ 2010-10-16 05:16:30.313 EET ] [CRSNative.register:1133] About to register: name: ora.LISTENER.lsnr, type: 1, update: false, force: false
    [main] [ 2010-10-16 05:16:30.321 EET ] [CRSNative.register:1141] Name: 'TYPE', Value: 'ora.listener.type'
    [main] [ 2010-10-16 05:16:30.331 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
    [main] [ 2010-10-16 05:16:30.338 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
    [main] [ 2010-10-16 05:16:30.345 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
    [main] [ 2010-10-16 05:16:30.353 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
    [main] [ 2010-10-16 05:16:30.360 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
    [main] [ 2010-10-16 05:16:30.466 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
    [main] [ 2010-10-16 05:16:30.484 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
    [main] [ 2010-10-16 05:16:30.516 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
    [main] [ 2010-10-16 05:16:30.526 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
    [main] [ 2010-10-16 05:16:30.538 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: '11.2.0.1.0'
    [main] [ 2010-10-16 05:16:31.184 EET ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
    [main] [ 2010-10-16 05:16:31.195 EET ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
    [main] [ 2010-10-16 05:16:31.219 EET ] [ConfigureListener.isPortFree:1025] Local host IP address: primary.localdomain/192.168.1.80
    [main] [ 2010-10-16 05:16:31.223 EET ] [ConfigureListener.isPortFree:1027] Local host name: primary.localdomain
    [main] [ 2010-10-16 05:16:31.229 EET ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: primary.localdomain/192.168.1.80
    [main] [ 2010-10-16 05:16:31.243 EET ] [ConfigureListener.isPortFree:1075] java.net.PlainSocketImpl.socketBind(Native Method)
    java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
    java.net.ServerSocket.bind(ServerSocket.java:319)
    java.net.ServerSocket.<init>(ServerSocket.java:185)
    oracle.net.ca.ConfigureListener.isPortFree(ConfigureListener.java:1041)
    oracle.net.ca.ConfigureListener.startOrStopListener(ConfigureListener.java:1118)
    oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:256)
    oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
    oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
    oracle.net.ca.NetCA.main(NetCA.java:405)
    *[main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: false*
    my firewall is offline so what prevents oracle from using that port i tried also to use another port but i am getting the same error.
    Please advise.
    Mohamed

    Hi Mohammed,
    [main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: falseMake sure that no listener service is running on port 1521.
    Its returning value false while checking free port for 1521.
    Regards,
    X A H E E R

  • Installing Grid Infrastructure 11gR2 on a 2nodes cluster: device names req.

    Hello, I am trying to install Grid Infrastructure 11gR2 on 2 sun nodes (Solaris 10) in order to try the product. but I am finding an error on the second node. After installing the software on both nodes and executing root.sh in the first node, the second node is complaining about the device I have defined for OCR, voting and ASM (the easiest scenary, 1 diskgroup for OCR, voting and ASM with 1 disk ) :
    DiskGroup conf_dg creation failed with the following message:
    ORA-15018: diskgroup cannot be created
    ORA-15031: disk     specification '/dev/rdsk/c5t500601603CE02E8Ed20s0' matches no disks
    I have realised this device has not the same name on both nodes as boxes are different; the device name in the second system is
    c2t500601673CE02E8Ed20s0
    This is slice 0 of and EMC Clariion LUN. As this info is recorded at the crsconfig_params file in both nodes and is the same, should the device names be the same on the N nodes of a Clusterware cluster? How should I do to correct the installation of the second node?
    Thanks in advance.

    Hi Gurus,
    I have similar problems on very first node1, it cannot create the diskgroup when running the root.sh. here is my configuration
    two guest ldoms running sol 10 update10 on sparc t5120 and sharing iscsi Luns provided by third ldom ( created zfs volumes and set shareiscsi on)
    all the permissions are 777 on /dev/rdsk/c1t*d0s1 and ownership grid:oinstall.
    using solaris.sparc64_11gR2_grid.zip
    I have installed 11gr2 rac for x86 using similar configuration with all x86 machines. but I cannot install using sparc as mentioned above. I have put some logs here
    much appreciated for you help.
    Thanks.
    [main] [ 2012-09-11 03:43:10.363 EDT ] [SQLEngine.doSQLSubstitution:2373] The substituted sql statement:=select count(*) from v$ASM_DISKGROUP where name=upper('crsdg')
    [main] [ 2012-09-11 03:43:11.070 EDT ] [UsmcaLogger.logInfo:141] CREATE DISKGROUP SQL: CREATE DISKGROUP crsdg EXTERNAL REDUNDANCY DISK '/dev/rdsk/c1t12d0s1',
    '/dev/rdsk/c1t8d0s1',
    '/dev/rdsk/c1t6d0s1',
    '/dev/rdsk/c1t9d0s1' ATTRIBUTE 'compatible.asm'='11.2.0.0.0'
    [main] [ 2012-09-11 03:44:02.639 EDT ] [SQLEngine.done:2148] Done called
    [main] [ 2012-09-11 03:44:02.645 EDT ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:createDiskGroups
    [main] [ 2012-09-11 03:44:02.647 EDT ] [UsmcaLogger.logException:172] ORA-15018: diskgroup cannot be created
    ORA-15081: failed to submit an I/O operation to a disk
    [main] [ 2012-09-11 03:44:02.649 EDT ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
    ORA-15081: failed to submit an I/O operation to a disk
    oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
    oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1898)
    oracle.sysman.assistants.usmca.backend.USMDiskGroupManager.createDiskGroups(USMDiskGroupManager.java:235)

  • Install grid infrastructure + ntp server

    Hi all,
    I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
    When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
    This IP is not in my LAN.
    Do you know this problem?
    Thanks.

    user12064507 wrote:
    Hi all,
    I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
    When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
    This IP is not in my LAN.
    Do you know this problem?Ask your network guys to tell you that if the IP is not is not in your LAN, to where it belongs. They are the best people to ask it.
    Aman....

  • Install Grid Infrastructure

    Try to install Grid Infrastructure (ASM) 11gR2 on SUSE Linux 11. Installation went through well untill the very last steps. The message indicated:
    Configure Oracle Grid Infrastructure for Standalone Server   -- failed
    *Automatic Storage Management Configuration Assistant failed.   --failed.*
    What could be the solution?

    The log does state: Successfully configured Oracle Grid Infrastructure for a Standalone Server
    Then it moves on to configure 'Automatic Storage Management Configuration Assistant'
    There it says:
    Starting 'Automatic Storage Management Configuration Assistant'
    Error while detecting Oracle Grid Infrastructure. ASMCA needs Oracle Grid Infrastructure to configure ASM.
    It sounds like that Oracle Grid Infrastructure for a Standalone Server was indeed successfully configured. However, for some reason the ASMCA could not find it.
    Next, I did the following:
    . oraenv
    ORACLE_SID = [oracle] ? +ASM
    ORACLE_HOME ...
    asmca
    The ASMCA GUI windows opened.
    After I enter the required info, then click on Create ASM button, this is what it displyed:
    Oracle Grid Infrastructure is not configured properly. ASMCA needs Oracle Grid Infrastructure to configure ASM.
    What could be wrong?

  • Error PRVF-7565 received when installing Grid Infrastructure 12102 on OEL7/64bit

    When installing GI on OEL7 I got this error PRVF-7565. Any clue?

    Hi,
    Try use kfod utility:
    Note: Keep in mind that the Grid Infrastructure software does not need to be installed to use kfod, since kfod is located as well on the staging area where you uncompressed the Grid Infrastructure software, as the following example:
    /stage/grid/stage/ext/bin/kfod
    Where: "/stage" is the directory where I uncompressed the source software for the Grid Infrastructure software.
    And put here :
    $ kfod asm_diskstring='/dev/usasdirvg801_asm*' disks=all

  • Error while installing Grid Control 12c (ERROR STREAM: *sys-package-mgr*: skipping bad jar)

    Hi all,
       OS: OEL 6.3 64 bits
       DB: 11.2.0.3
       Grid: 12.1
       While installing Grid Control 12c, the following error appears to me:
    INFO: SaveInvWCCE JRE files in Scratch
    INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
    INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
    INFO: Config Initialize JRE files in Scratch
    INFO: no env vars set, no envVars.properties file is generated
    INFO: none of the components are configurable
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = /gridControl/WLS/jdk16/install/chainedInstall/globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Install Finished at: 2013-07-04_11-12-49-PM
    INFO: The ARU ID found in shiphomeproperties.xml file is 226
    INFO: ARUId present in shiphomeproperties.xml matches with the 64 bit OMS Platforms ARU ID 226, so -d64 is passed for wls install.
    INFO: Executing the command /gridControl/WLS/jdk16/jdk/bin/java   -d64  -Djava.io.tmpdir=/gridControl/WLS/.wlsinstall_temp -Xms128m -Xmx1024m  -jar /u01/binaries//wls/wls1035_generic.jar -mode=silent -silent_xml=/gridControl/WLS/.wlsinstall_temp/wls.xml -log=/u01/oraInventory/logs/installActions2013-07-04_11-07-45PM.log.wls  -log_priority=debug
    INFO: Extracting 0%....................................................................................................100%
    INFO: ERROR STREAM: *sys-package-mgr*: skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'
    INFO: #
    INFO: # A fatal error has been detected by the Java Runtime Environment:
    INFO: #
    INFO: #  SIGSEGV (0xb) at pc=0x0000003a23689cdc, pid=24834, tid=139710737405696
    INFO: #
    INFO: # JRE version: 6.0_24-b50
    INFO: # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
    INFO: # Problematic frame:
    INFO: # C  [libc.so.6+0x89cdc]
    INFO: #
    INFO: # An error report file with more information is saved as:
    INFO: # /tmp/hs_err_pid24834.log
    INFO: #
    INFO: # If you would like to submit a bug report, please visit:
    INFO: #   http://java.sun.com/webapps/bugreport/crash.jsp
    INFO: #
    INFO: Return value is 134
    INFO: POPUP ERROR:Installation of Oracle WebLogic Server has failed, check log files for more details.
       The line "skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'" is the one that's worring me. Can it be corrupt? Or it is something else?
       Thanks in advance.

    Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause.  If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

  • Segmentation fault while install Grid 11.2.0.3

    Hi guys.
       I try to install  a stand alone oracle Database 11.2.0.3 with ASM over a RedHat 6.4 x86_64 Vmware server.
    Hardware
    4 cores
    32 GB RAM
    Vmware server 5.1.0
    Operating System
    RedHat 6.4 x86_64, 2.6.32-358.6.2.el6.x86_64 (update today with yum update).
    All needs packages installeds (i think so).
    Vmware tools installed and updated.
    Software
    p10404530_112030 software packages.
    Disk are mapping with udev/multipath, not ASM.
    Installing steps.
    1.- Execute enviroment shell.
    ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
    ORACLE_SID=+ASM; export ORACLE_SID
    ORACLE_HOME=/u01/app/11.2.0.3/grid; export ORACLE_HOME
    PATH=$PATH:$ORACLE_HOME/bin:$BASE_PATH; export PATH
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
    CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
    2.- Execute Grid runInstall
    3.- Chose Configurarion Grid for Standalone server.
    4.- ASM disk are founded, listed and selected.
    5.- Requirement validator only warning pdksh package, but Redhat 6 has ksh package (and it's installed). So, i ignored that warning and continue.
    6.- Install process start fine.
    7.- Install process want executed root scripts
    [root@oraclepruebas ~]# /u01/app/oraInventory/orainstRoot.sh
    Changing permissions of /u01/app/oraInventory.
    Adding read,write permissions for group.
    Removing read,write,execute permissions for world.
    Changing groupname of /u01/app/oraInventory to oinstall.
    The execution of the script is complete.
    [root@oraclepruebas ~]# /u01/app/11.2.0.3/grid/root.sh
    Performing root user operation for Oracle 11g
    The following environment variables are set as:
        ORACLE_OWNER= oracle
        ORACLE_HOME=  /u01/app/11.2.0.3/grid
    Enter the full pathname of the local bin directory: [/usr/local/bin]:
       Copying dbhome to /usr/local/bin ...
       Copying oraenv to /usr/local/bin ...
       Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /u01/app/11.2.0.3/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'oracle', privgrp 'oinstall'..
    Operation successful.
    LOCAL ONLY MODE
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Failure with signal 11 from command: /u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas
    Pin node (/u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas) ... failed
    So, if i execute crsctl command, i have a nice Segmentation fault error, but if i try to execute another grid command, everyting is fine.
    [root@oraclepruebas oracle]#  /u01/app/11.2.0.3/grid/bin/crsctl
    Segmentation fault
    [root@oraclepruebas oracle]#
    [root@oraclepruebas oracle]#  /u01/app/11.2.0.3/grid/bin/ocrcheck
    Status of Oracle Cluster Registry is as follows :
             Version                  :          3
             Total space (kbytes)     :     262120
             Used space (kbytes)      :         92
             Available space (kbytes) :     262028
             ID                       :  756593197
             Device/File Name         : /u01/app/11.2.0.3/grid/cdata/localhost/local.ocr
                                        Device/File integrity check succeeded
                                        Device/File not configured
                                        Device/File not configured
                                        Device/File not configured
                                        Device/File not configured
             Cluster registry integrity check succeeded
             Logical corruption check succeeded
    This is weird, because i has installed a RAC 11.2.0.3 databases and standalone databases (all with grid) over Vmware and RedHat 6.4 and works fine. I have even compared the rpm packages between a functionally installation with this server and matched all !!!.
    I think that i am making a mistake, but i can't see it. I wan't reinstall or clone a funcionally virtual machine, because i want to learn with my mistake.
    I has googled too much and i searched into metalink but i can't find something similar.
    I apreciate your help, suggestions, anything.

    I had similar issue while installing 32bit version by mistake. Just to checkyou have x86-64 in the filenames of oracle software distribution
    p10404530_112030_Linux-x86-64_1of7.zip
    p10404530_112030_Linux-x86-64_2of7.zip
    p10404530_112030_Linux-x86-64_3of7.zip
    Regards
    Ed
    http://erudans.blogspot.com

  • INS-20802: Problem installing Grid Infrastructure on Windows 2008 R2 Server

    Hello,
    I try to install the Grid Infrastructure on a Windows 2008 x64 Server. Everything works fine (the SCAN configuration and Verify) but at the end of the installation process I get the following error message:
    [INS-20802]: Grid Infrastructure Configuration not successfull.
    The errors that I found in the file oraInstall2012-02-27_11-58-26AM.log inside the INVENTORY\LOGS directory :
    INFO: Unable to read C:/app/11.2.0/grid/inventory/ContentsXML/comps.xml. Some inventory information may be lost.
    INFO: Install type for "Oracle Database 11g 11.2.0.3.0 " is "ASM".
    INFO: Conflict while setting install type of "Required Support Files 11.2.0.3.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.assistants.server 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ntrdbms.oraconfig 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.xdk 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.xdk.server 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.mgw.common 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.install.seeddb 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ctx 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.owb.rsf 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.sysman.console.db 10.1.0.2.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.oci 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ovm 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.sqlj.sqljruntime 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.hsodbc 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.marvel 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.dbdev 11.2.0.3.0.
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.dbjava.server 11.2.0.3.0.
    INFO: Install type for "Cluster Ready Services Files 11.2.0.3.0 " is "Complete".
    INFO: Conflict while setting install type of "HAS Common Files 11.2.0.3.0 " to "Complete (Complete)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
    INFO: Install type for "Oracle Net Listener 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Oracle Internet Directory Client 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Oracle JVM 11.2.0.3.0 " is "Typical".
    INFO: OUI-10066:Not all the dependencies for the component Oracle JVM 11.2.0.3.0 could be found. Missing component oracle.javavm.companion 11.2.0.3.0.
    INFO: Install type for "Oracle Net 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Oracle Netca Client 11.2.0.3.0 " is "Typical".
    INFO: Install type for "SQL*Plus 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Oracle Database Utilities 11.2.0.3.0 " is "Typical".
    INFO: OUI-10066:Not all the dependencies for the component Oracle Database Utilities 11.2.0.3.0 could be found. Missing component oracle.omwb 10.1.0.1.0.
    INFO: Install type for "Oracle Recovery Manager 11.2.0.3.0 " is "Typical".
    INFO: Install type for "PL/SQL 11.2.0.3.0 " is "Typical".
    INFO: Install type for "HAS Files for DB 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Assistant Common Files 11.2.0.3.0 " is "Typical".
    INFO: Conflict while setting install type of "Oracle Help For Java 4.2.9.0.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    INFO: Conflict while setting install type of "Buildtools Common Files 11.2.0.3.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    INFO: Conflict while setting install type of "Sun JDK 1.5.0.30.03 " to "Maximum (Complete)". Install type already set to "Maximum (Complete)". Seting it to "Custom (Custom)".
    INFO: OUI-10066:Not all the dependencies for the component Assistant Common Files 11.2.0.3.0 could be found. Missing component oracle.bali.kodiak 1.2.1.0.0I.
    INFO: Install type for "HAS Common Files 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Oracle Multimedia 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Oracle Multimedia Locator 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Required Support Files 11.2.0.3.0 " is "Custom".
    INFO: Conflict while setting install type of "Oracle Net Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    INFO: Conflict while setting install type of "Oracle Globalization Support 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
    INFO: Conflict while setting install type of "Oracle Core Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
    INFO: Conflict while setting install type of "RDBMS Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    INFO: Conflict while setting install type of "Oracle RAC Required Support Files-HAS 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
    INFO: Install type for "Oracle JDBC/THIN Interfaces 11.2.0.3.0 " is "Typical".
    INFO: OUI-10066:Not all the dependencies for the component Oracle JDBC/THIN Interfaces 11.2.0.3.0 could be found. Missing component oracle.dbjava.ucp 11.2.0.3.0.
    INFO: Install type for "Oracle Core Required Support Files 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Installation Common Files 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Precompiler Required Support Files 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Parser Generator Required Support Files 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Agent Required Support Files 10.2.0.4.3 " is "Custom".
    INFO: Install type for "XDK Required Support Files 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Oracle RAC Required Support Files-HAS 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Buildtools Common Files 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Oracle Globalization Support 11.2.0.3.0 " is "Custom".
    INFO: Install type for "Oracle Locale Builder 11.2.0.3.0 " is "Custom".
    INFO: Conflict while setting install type of "Oracle JFC Extended Windowing Toolkit 4.2.36.0.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    INFO: Install type for "Oracle Clusterware RDBMS Files 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Cluster Verification Utility Common Files 11.2.0.3.0 " is "Typical".
    INFO: Install type for "CFS 11.2.0.3.0 " is "Complete".
    INFO: Install type for "Oracle Notification Service (eONS) 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Cluster Verification Utility Files 11.2.0.3.0 " is "Complete".
    INFO: Install type for "Oracle LDAP administration 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Deinstallation Tool 11.2.0.3.0 " is "Complete".
    INFO: Conflict while setting install type of "Oracle Database Deconfiguration 11.2.0.3.0 " to "Complete (Complete)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
    INFO: Install type for "Enterprise Manager Common Files 10.2.0.4.3 " is "Complete".
    INFO: Install type for "Oracle Notification Service 11.2.0.3.0 " is "Typical".
    INFO: Install type for "Oracle Help For Java 4.2.9.0.0 " is "Custom".
    INFO: Conflict while setting install type of "Bali Share 1.1.18.0.0 " to "Custom (Custom)". Install type already set to "Maximum (Complete)". Seting it to "Custom (Custom)".
    INFO: Conflict while setting install type of "Oracle Ice Browser 5.2.3.6.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    INFO: Install type for "Oracle Ice Browser 5.2.3.6.0 " is "Custom".
    INFO: Conflict while setting install type of "Oracle Extended Windowing Toolkit 3.4.47.0.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    I have read and implemented all the settings described in DOCs ID 811271.1 , ID 810394.1 and RAC on Windows Step by Step Installation Instructions.
    After many attempts with the same error Ii am trying to install in a single node (RAC1). But the error looks the same, my server is clean with no oracle.
    Note: For this installation I downloaded and uncompressed the files p10404530_112030_MSWIN-x86-64_1of7.zip, p10404530_112030_MSWIN-x86-64_2of7 and p10404530_112030_MSWIN-x86-64_3of7 of the oracle site.
    I do not know what to do for this installation work.
    Thanks

    My recommendation would be to format the disks and install Linux.
    And I say that only half-jokingly. Fail-over with Windows is never as fast or as transparent as with a *NIX O/S.
    As to your specific issue ... open an SR with Oracle Support. Hardly anyone uses Windows for Oracle ... even fewer with RAC ... for the reason I gave above.

  • System not started after installing grid control

    HI,
    I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
    after starting up the listener          
    sql>ora-01078: failure in processing system parameters
    LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
    sql>disconnectdfailed
    opmnctl:starting opmn and all managed process...
    CRS-4124: oracle high availability services startup
    crs-4000:command start failed, or completed with errors>

    Hi,
    Thanks for the reply!!!
    I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
    sql>ora-01078: failure in processing system parameter
    LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
    sql>disconnectdfailed
    opmnctl:starting opmn and all managed process...
    CRS-4124: oracle high availability services startup
    crs-4000:command start failed, or completed with errors>
    then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
    So my question is which file or dir is forcing system to startup the grid control on boot?

  • Installing Grid Infrastructure 11.2.0.2 fails on Oracle Linux 5.6 and 6.0

    Hi all,
    We are in the process of building our new enterprise environment and tried to install the following:
    Oracle Linux 6.0
    Grid Infrastructure 11.2.0.2
    ASM
    OCFS2
    Oracle RDBMS 11.2.0.2
    Installation of Grid Infrastructure failed on Oracle Linux 6.0 and 5.6 as well. Is it because it's not yet certified for these Oracle Linux versions? Where can we find compatibility matrixes or certification information to find out which versions do work together? Been trying to find them with no success.
    Thanks for any help!

    Dude wrote:
    I have recently installed Oracle 11.2.0.2 including ASM, which also installs Grid infrastructure under Oracle Linux 5.6 (default UEK kernel) without any problems. I installed the oracle-validated package prior to the Oracle installation.OEL 5.6 and 11.2..02 Grid Infrastructure installation (for x86_64) failed in our case. Have opened a SR several weeks ago for it, but no resolution. We since reverted back to OEL 5.5 for building and running this specific RAC.
    There's also errors in OEL 5.6's Infiniband s/w stack. The openibd service fails to apply errata correctly because the o/s command used has since changed command line parameters. My guess is that testing happened solely on new h/w where this errata did not have to be applied, thus were not tested. Also, this service failed to start the srp_daemon (is critical for making sure that the storage layer works each and every time and does not cause stale connections that lead to command rejections from the storage server after a reboot of a RAC node)
    I not only had to fix the openibd service to correctly apply the errata, but also write a separate srpd service that dealt with starting up and shutting down the srp_daemon.
    Not very impressed with OEL 5.6 at all and it will be unlikely that we'll use it. And it raises a lot of concern whether OEL 6 would be a robust enough o/s for running our RAC systems.

  • System wont boot after installing fx5600 vga crd

    I have purchased a brand new msi 5600 vga card when i put it in the AGP slot the system wont boot its an Asus Mobo with p41800 my gfoce 4200ti werks fine any ideas ????
     ;(

    Quote
    Originally posted by Deathstalker
    ricin,
    Quote
    In addition, making unsubstantiated statements as Deathstalker did that, quote "It has already been proven that 50% of all the problems relating to Vid Cards is Power Supply Related...." is not a valid argument either. If you're going to make those sort of claims, then you should back it up with firm data...
    The point is, someone in the forums already did. All the forum regulars should remember when it happened too. A guy chastized us because we ask about the specs on people's power supplies. He took every post in the VGA forum to date and catagorized the solutions and found that only 50% of the problems in the forums were Power Supply Related.  To me, if one out of every two problems in the VGA Forums is Power Supply Related, by asking the question, we can identify and solve 50% of the problems.
    But we are used to people like yourself coming along every few months.  Are you sure you did not used to log into these forums under the username of elzie?
    Is this one of your old Threads:
    A must read for everyone....
    Richard
    Yes, he does sound a bit like me doesn't he? (or vice versa). But no, we are two different people which your moderators can prove by looking at the IP addresses of both myself and elzie.
    But I must admit he echo's my views. There is a definite danger that some posters who are here to help people will latch on to one supposed "solution" i.e. the PSU which is then tailored to fit all problems. Same goes for avoiding flashing the VGA BIOS especially over the Internet.
    But as I've said before, 98% of system problems are software related and hardware only plays a minor role. It's a bit like a car. Without gas, you're not going anywhere regardless of all the technology that's been pumped into it. But gas can get contaminated with grit and can clog up fuel lines. So what should we do then? Change the whole car maybe? Or just replace the carburetor? After all, we don't want to risk damaging the machine by cleaning it do we?
    There's just too much emphasis these days on blaming the product as the cause of the problem and replacing parts rather than taking the view that it's the user who has caused the problem himself by not following instructions when installing software. Statistics can be adapted to suit the issue too. But as I've already said, if the PSU was the main cause of failure of high end cards, the Internet would be literally littered with news about it. But there aren't any such articles, so how do you explain that?? And as Toms Hardware.com mentions here, the CPU and high end card can draw 160 watts. So it stands to reason that if you've got a 300W PSU, you've got more than enough over to run both doesn't it??
    It's all very convenient to say, "replace the PSU and your troubles will be over", but if the problem persists after doing that, it won't do MSI reputation any good and the only benefit will be that a PSU manufacturer will have made a little extra profit this year.

Maybe you are looking for

  • Windows 7 bootcamp problem, for my iMac

    I am trying to use bootcamp to instal Windows 7 on my iMac desktop, But I keep getting a message saying no support download is availible. What do i do to get bootcamp working?  I need windows for School for my engineering class and C++ classes.  Can

  • Overview of installation process?

    I have 4 StorEdge 3511 boxes, a SunFire V440, and a QFS license. I've located (been given, actually) some pretty good QFS doc, but I still need: 1) A nice overview of how to configure the 4 3511's to work together and provide LUN's or slices or whate

  • Website does not load

    Why does the URL www.courier-journal.com not load on my machine--it used to but just after I put in new RAM all I get is blank screen and "done" in the status bar. It's the only website I can't load. I get all my news from them. Help!!

  • Box needs reset occasionally because of hdmi cable?

    Hello, Our box needs reset occasionally after trying to watch something on dvr or on demand.  Sometimes it will be a couple times a week, others times it will be several weeks in between.  I called fios support and they told me that it was because we

  • IPhone 4 battery duration (iOS 6.0.1)

    In my daily use, the iPhone 4 only lasts for 6 hours and a half of usage time, until it reaches 0%. Should I buy a new battery?