System Recovery does not work. Error Code: 0xe0ef003
I have a Touchsmart 310 1125y - Upon bootup was getting a BOOTMGR is missing. I tried the system recover on the hard drive and that failed with the error code: 0xe0ef003. I went ahead and purchased the cd revovery discs from HP Site ( 4 plus the supplimental reovery disc) and ran all of them and got down to disc 4 and then that same error came up. When I tried to reboot, it comes up to a blank screen with the flashing cursor in the top left corner. I hit ctrl/alt/del and the HP Blue screen comes up, when I hit the F11 now it just goes to a blank screen again with the cursor in the top left corner. Any other suggestions on how I can fix this?
Hi
Once unit is powered on keep tapping F10 Key go to Diagnostics run the Hard drive test if failed you need to replace the Hard drive if test passes kindly let me know.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Similar Messages
-
CD/DVD drive does not work - error code 39 on Satellite A300
Good evening.
I've encountered a problem with my Satellite A300.
I can't get the disk drive to function.
Device manager says the driver is current. But also says it is corrupt "code 39".
I have tried downloading new drivers from Toshibas website but they all come up as code 39 unable to install. The first I noticed it was last night when I was installing Norton 360. I had the cd it worked once then nothing.
Has anyone ran across this before?
Any help would be greatly appreciated.Hi
I had the same issue and I found a solution here in the forum.
The problem is that your Windows registry is muddled up.
You should firstly access the device manager and should remove the CD/DVD drive from the device list.
Secondly you have to start the registry and have to remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Finally reboot the notebook and test the CD/DVD drive again!
Bye -
HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.
HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Printer will not work: error code 0xc19a0022
Printer will not work: error code 0xc19a0022
Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Systems preferences does not work
My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....
Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual -
in the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered
Also, I probably should have added that I am with Vodafone, and I'm currently using the Blackberry Curve 3G (9300) on the version 5 software. I also have no access to the Internet, which is telling me I have no signal. I have full 3G signal, so there is no issue whatsoever with my signal. I don't use the BBM on the phone, so I'm not sure if the issue is affecting that also, but I assume it would.
-
how can I downgrade my operating system as my bluetooth work ok with my holde commodore on the 4.2.1 system but now it is upgraded to the latest system it does not operate properley
thankyou but it looks like we won't be buying another iphone
-
My ITunes will not work error code 2503
window XP cannot uninstall ITunes. ITunes will not operate. error code 2503
Hello, bearbassman.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H. -
Error 150:30 - License Recovery does not work
Hi all,
I downloaded the License Recovery for Mac to rectify the issue but it does not allow me to "Doubleclick the LicenseRecoveryLauncher.app and enter your Mac OS X password when prompted." it simply downloads the file to my desktop and I'm not sure where to go from there…
In license recovery I have:
Any suggestions on what I can do next to fix this?
Thanks.shawnnita wrote:
I'm still waiting on support for the original issue. Could someone please give me a ring regarding this???
Did you receive a private message from Sandeep Singh? Sandeep is the original author of PSE and he has been developing this product since 1972 AFAIK. Now before people ask me how did I know this when I wasn't even born, The answer is in the splash screen of PSE13. -
DVD burner not working Error code 0x80020022 & 0x8002006E
When I try to burn a DVD I get the following errors . (Error code 0x80020022) & (0x8002006E)
When I put a dvd movie in it will show on the desktop and play in dvd Player.
It will show a CD in the finder and will play it in the finder and in iTunes. iTunes is can also burn CD.
I have brunt some dvds in the past month but it was hit and miss. Now I can not burn any dvds.
I booted up my iMac from my MacBook when I go to burn the dvd I get the same error. So now I'm not to sure if it is a software issue. I have also done a restart while holding P & R "option & Apple" to reset the Pram.
I'm going to erase the HD tonight and reinstall OS 10.5 to see if that fixes the problem.
If there is anything more I can do please let me know. I dont mind replacing the Supper Drive but I dont want to spend the money if that is not going to fix the problem.I keep getting this code come up when i try to burn 0x80020022. My imac is 8 months old, and after looking on mac forums the only thing that seems to work is to go in and play around with the international system prefs. It will then burn a CD, although very slowly. A week later I go to burn a cd and this happens again! This surely can't be right with an 8 month old machine, and does this mean my DVD drive is going to die soon? I can't keep having to adjust the prefs every week.
Does anybody have any answers?
Cheers -
Non-apple keyboard and aperture recovery does not work
Hello all, I use a mac mini with a non-apple keyboard and I am trying to recover my Aperture database, however, although the alt and command key work in all applications, the combination does not start up Aperture in recovery mode. Anyone any ideas? Thanks.
regards,
DouweHi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan -
Upgrade from Bootcamp 3.0 to 3.1 does not work - error 2229
Hi,
I´m running Snow Leopard and Win7 on my MBP 2008, each at 250GB HDD space. I installed both together. Before, I had Win Vista and Mac OSX Tiger installed and hardware worked in both OS´s. But I had to exchange my HDD and install everything from scratch. Ever since, I can´t use right click on Trackpad or Bluetooth properly in Win 7. In Snow Leopard, everything works fine.
I found out a couple of different ways trying to fix this, but nothing worked. Now I found the hint to install this here http://trackpad.powerplan7.com/ but this requires the previous installation of Bootcamp 3.1. Problem is that I have Bootcamp 3.0 installed (with bugs, as said before - meaning trackpad etc. is not working properly).
Anything I try fails - I can´t install single drivers from Bootcamp CD (it says it worked, but nothing happens), I can´t upgrade to Bootcamp 3.1 (still the error "2229")...
So I´m lost at the moment and try to always have an external mouse with me, that´s USB connected.
Does anyone here know better ?
Thx,
SimonI dontknow if this will help you or not, ut back when the BootCamp v3.1 update came out, there were a number of people who could not get it to install. For many of them it was that they had a third-party software installed which added a display-adapter to their system (LogMeIn, etc.) If you have anything like that installed, try un-installing it first, then reboot, and try the bootcamp install. If that works, then you can easily re-install the other software again (although you may need to uninstall it again fr the next bootcamp update).
-
BSOD "ntoskrnl.exe" - system recovery did not work
Hi, I keep getting BSOD repeatedly whenever i log into windows normally. I can only access my laptop through safe mode w/networking. anyways i have narrowed the problem down to the driver "ntoskrnl.exe" However I dont know what is causing the problem
and how to fix it.
here is the link from my onedrive for kernel dump file:
https://onedrive.live.com/redir?resid=9997264A2CACAA02%21116
Dump File : 082614-111447-01.dmp
Crash Time : 8/26/2014 3:04:11 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`00000000
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff800`032e1c3f
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75bc0
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18409 (win7sp1_gdr.140303-2144)
Processor : x64
Crash Address : ntoskrnl.exe+75bc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\082614-111447-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 287,608
Dump File Time : 8/26/2014 3:17:08 PMNHJ
These crash was caused by your Symantec killing netio.sys. I would remov Symantec and use MSE in its place
Symantec is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
http://www.microsoft.com/security_essentials/
For Norton 360 use this http://symantec.pcperformancetools.com/norton-360-how-to-uninstall.html
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\082614-111447-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred srv*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`03263000 PsLoadedModuleList = 0xfffff800`034a6890
Debug session time: Tue Aug 26 15:04:11.347 2014 (UTC - 4:00)
System Uptime: 0 days 0:02:27.283
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck A, {0, 2, 1, fffff800032e1c3f}
*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800032e1c3f, address which referenced memory
Debugging Details:
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80003510100
GetUlongFromAddress: unable to read from fffff800035101c0
0000000000000000 Nonpaged pool
CURRENT_IRQL: 2
FAULTING_IP:
nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+4f
fffff800`032e1c3f 488713 xchg rdx,qword ptr [rbx]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
TRAP_FRAME: fffff8800a7f3230 -- (.trap 0xfffff8800a7f3230)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa800a138b50 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff8800a7f3430 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800032e1c3f rsp=fffff8800a7f33c0 rbp=0000000000000008
r8=fffff8800a7f3430 r9=fffff88001d8aca0 r10=0000000000000000
r11=0000000000000040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+0x4f:
fffff800`032e1c3f 488713 xchg rdx,qword ptr [rbx] ds:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800032d8169 to fffff800032d8bc0
STACK_TEXT:
fffff880`0a7f30e8 fffff800`032d8169 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`0a7f30f0 fffff800`032d6de0 : 00000000`00000010 fffff880`0a7f3420 00000000`00000003 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`0a7f3230 fffff800`032e1c3f : 00000000`00000003 00000000`00000002 00000000`00000003 00000000`00000002 : nt!KiPageFault+0x260
fffff880`0a7f33c0 fffff880`01b419c7 : 00000000`00000008 fffff880`0a7f36a0 00000000`00008900 fffffa80`081b47c8 : nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+0x4f
fffff880`0a7f3410 fffff880`01ce608d : fffffa80`0bfe79d0 fffffa80`0c08b8a0 fffff880`0a7f36a0 00000000`00008900 : NETIO!WfpExpireEntryLru+0x17
fffff880`0a7f3460 fffff880`01cad7b7 : 00000000`00000004 fffff880`01b10030 fffffa80`0bfe7a20 00000000`00000001 : tcpip!WfpAleCloseRemoteEndpointConnection+0x2d
fffff880`0a7f3490 fffff880`01d25e5b : fffffa80`0bfe79d0 fffffa80`0b9e2cda 00000000`00000001 fffffa80`0bfe79d0 : tcpip! ?? ::FNODOBFM::`string'+0x20f72
fffff880`0a7f35e0 fffff880`01d261e2 : 00000089`00000000 fffffa80`0b9e2c10 fffffa80`089266a0 00000000`00000001 : tcpip!WfpAleHandleSendCompletion+0xeb
fffff880`0a7f3700 fffff880`01d306b2 : fffff880`0a7f3ba8 00000000`00000001 00000000`00000000 fffffa80`08159f18 : tcpip!WfpAlepAuthorizeSendCompletion+0x32
fffff880`0a7f3750 fffff880`01ba7af2 : fffffa80`00000089 fffff800`00000089 fffffa80`0bc9d370 00000000`00000001 : tcpip!WfpAleCompleteOperation+0x162
fffff880`0a7f37f0 fffff880`076e67bb : 00000000`00000000 00000000`00000000 fffffa80`0bc737c0 00000000`00000030 : fwpkclnt!FwpsCompleteOperation0+0x1e
fffff880`0a7f3820 00000000`00000000 : 00000000`00000000 fffffa80`0bc737c0 00000000`00000030 00000000`00000089 : SYMNETS+0x1e7bb
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!WfpExpireEntryLru+17
fffff880`01b419c7 488b4310 mov rax,qword ptr [rbx+10h]
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: NETIO!WfpExpireEntryLru+17
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 5294760d
IMAGE_VERSION: 6.1.7601.18327
FAILURE_BUCKET_ID: X64_0xA_NETIO!WfpExpireEntryLru+17
BUCKET_ID: X64_0xA_NETIO!WfpExpireEntryLru+17
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xa_netio!wfpexpireentrylru+17
FAILURE_ID_HASH: {fcdee258-ad7b-b100-5f3a-ac9544c5fd1f}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag -
Satellite Pro A210 DVD Drive not working - error code 39
Hi All
My Satellite Pro A210 dvd drive is not loading.
When I looked into it it showed an error code 39.
I tried uninstalling it and reinstalling it but it's still not working.
Any ideas?Hi
From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
You can try this workaround:
Go to device manager and delete the CD/DVD drive from the device list.
Then go to registry (regedit) and remove the upper and lower filters from the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the unit and test it again
I think this should help! -
TM Full system recovery does not see my backup folder
Hello to you all Apple/Mac lovers ,
So, as the title mentions, I need to do a full system backup after an HD failure. No problem so far my last backup was 11 minutes before the problem happened. Now, I re-installed Leopard and followed the instructions to proceed to a full system recovery. But the recovery software does not detect my external hard-disk or does not see the backup in it ... what's wrong ? What information would you need to help me solve that ? Thanks in advance ,
CharlesAre you doing this from within the Leopard installer or is this post installation? If the latter are you trying to migrate from your TM backup in Setup Assistant or are you simply trying to do a basic restore from your TM backup drive? If the latter be sure you change the Computer Name in Sharing preferences to match the one used before your reinstall.
Maybe you are looking for
-
How to Put together all SAP Transactions that are used a single User
Dear Friends, In our client place, each user will be given a set of transaction codes, (like Sales Order Creation, Invoice Creation etc....). Each user role differs with other user role. Our client requirement is to put together all transaction codes
-
Getting Error while Changing the status of Batch
Hi , For Reverting back from Completed to WIP i am using gme_api_pub.uncertify_batch API, but getting the following error. I am passing batch_id to the API but unalbe to solve the issue. x return status: E msg count 2 is : 1 err msg 1is: No keys spec
-
Dear Guru's In Third Party Business Process the vendor deliver the goods directly to customer.How we came to know that Did the customer received the stock from vendor to company ie system. could anybody explain me in this Regard. Thank you Acquire
-
Sending response back to RFC in UDF
Hi All, I have a Sync scenario from RFC to SOAP. I want to check the line items in RFC request. If there are no line items , then i want to stop the scenario and use UDF to send the constant (Invalid line items based on validations) back to RFC respo
-
Can a sandisk be used on the macbook pro w/retina?
Can I use a sandisk on my macbook pro with retina?