System recovery fails with C++ runtime error

My Compaq CQ610-410US running Windows 7  is unusable. When using system recovery, either from CD's or Recovery drive, it fails with C++ runtime library program not found Contact HP Support. EIther way, Windows is loaded and system recovery screens appear. Once I respond to removing all accessories it then fails with the runtime error. Two questions, (1) is there a way around it? (2) will getting new recovery discs from HP even work?
This question was solved.
View Solution.

All I can suggest is to order a set from HP and hope they work. This error is not a common one and the HP supplied recovery discs should work.

Similar Messages

  • Windows 8 USB recovery fails with CTOERROR.flg error

    Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
    [22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
    [22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
    [22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
    I have tried all the scenarios which are described in this forum but no success.
    Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
    I have run diagnostic tests on Memory and Disks and both are fine.
    * There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
    My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
    This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
    History about previous issue with this laptop:
    Order # BDRN598901
    Order # BDTP356101
    * I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me. 
    Even after that i could not create a recovery disk and they send me a USB recovery device. 
    Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
    BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
    Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
    Thanks,
    KB29

    Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • CTM Run failing with TSV_TNEW_PAGE_ALLOC_FAILED runtime error

    Hi,
    While doing the CTM run,system is giving the  memory dump with run time error TSV_TNEW_PAGE_ALLOC_FAILED.
    I understand this is because memory constraint and possible recommendation to either increase the Memory or reduce the master data selections for planning but would like to know if some master data discrepancy can cause the infinite run of CTM and hence memory dump like product at location being set as Inhouse production but no PPM maintained for it.
    Any suggestions on this willl reward points.
    Thanks,
    Manish
    Edited by: Manish Thukral on Jun 24, 2008 9:34 PM

    Marcelo,
    Thanks for you reponse.Can you please share some more information on what explanation profile is and where it is set so that can I check.
    Manish

  • Media Recovery failed with error 1111

    Hi,
    on 10g R2 on Unix I have :
    Media Recovery Start
    Managed Standby Recovery not using Real Time Apply
    Fri Jun 24 10:56:52 2011
    Media Recovery failed with error 1111
    From alert.log :
    Errors in file /data01/oracle/mydb/admin/bdump/hhhh_17637.trc:
    ORA-01111: name for data file 523 is unknown - rename to correct file
    ORA-01110: data file 523: '/oracle/product/10g/db_1/dbs/UNNAMED00523'
    ORA-01157: cannot identify/lock data file 523 - see DBWR trace file
    ORA-01111: name for data file 523 is unknown - rename to correct file
    ORA-01110: data file 523: /oracle/product/10g/db_1/dbs/UNNAMED00523'
    Any idea ?
    Thanks.

    here is one test case, i ran into same issue. and reolved as below.
    When Standby_file_management is set to “MANUAL” , if any data files added on primary database, These changes certainly won’t be altered in standby database.
    After starting MRP process, it dies and terminated with the following errors.
    Errors from Alert log file:-
    Errors in file /oracle/app/oracle/admin/CC/bdump/cc_mrp0_22294.trc:
    ORA-01111: name for data file 536 is unknown - rename to correct file
    ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
    ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
    ORA-01111: name for data file 536 is unknown - rename to correct file
    ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
    Errors from Trace file:-
    MRP0: Background Media Recovery terminated with error 1111
    ORA-01111: name for data file 536 is unknown - rename to correct file
    ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
    ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
    ORA-01111: name for data file 536 is unknown - rename to correct file
    ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
    ORA-01111: name for data file 536 is unknown - rename to correct file
    ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
    ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
    ORA-01111: name for data file 536 is unknown - rename to correct file
    ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
    ARCH: Connecting to console port...
    Check out from SQL, Which files need to be recovered on standby database?
    SQL> select * from v$recover_file where error like '%FILE%';
    FILE# ONLINE  ONLINE_ ERROR                   CHANGE# TIME
    +536 ONLINE ONLINE FILE MISSING 0+
    SQL>
    On Primary check out for actual naming convention:-
    SQL>  select file#,name from v$datafile where file#=536;
    FILE# NAME
    +536 DATA/c/datafile/undotbs9.595.750444337
    SQL>
    On Standby check datafile name:-
    SQL> select file#,name from v$datafile where file#=536;
    FILE# NAME
    +536 /oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536+
    SQL>
    Make sure still standby_file_management is set to “MANUAL”, After performing media recovery again can be enabled to “AUTO”.
    Rename datafile from standby database:-
    SQL> alter database create datafile '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536' as 'DATA3/cc/datafile/undotbs9_595_750444337';+
    Database altered.
    Start the MRP Now:-
    SQL> alter database recover managed standby database disconnect from session;
    Database altered.
    After creating the file, MRP will start applying archives on standby database.

  • Media Recovery failed with error 368

    The following error occurs on standby database---
    ALTER DATABASE RECOVER CONTINUE DEFAULT
    Media Recovery Log x.0000008973.arc
    Recovery interrupted.
    Redo code 6 enountered during in-flux buffer recovery
    Some recovered datafiles maybe left media fuzzy
    Media recovery may continue but open resetlogs may fail
    some error occurred during recovering in-flux buffers
    Recovered data files restored to a consistent state at change 138445558.
    Media Recovery failed with error 368
    Please advice. Thanks in advance

    Here you have the complete reference for the command
    that you executed :
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_15a.htm#SQLRF00802
    [email protected]
    Joel P�rez

  • Package failed with run time error: " GETWA_NOT_ASSIGNED".

    Hi,
    One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
    Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
    Thanks is advance.
    Error Details.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32774).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    Regards, Trine

    Hi Trine,
    the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
    Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
    Best Regards,
    António

  • Backup Fails with Invalid RECID Error

    Hi All,
    Please help me to understand Caution -section
    below text is from
    [http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
    Backup Fails with Invalid RECID Error: Solution 2
    This solution is more difficult than solution 1:
    To create the control file with SQL*Plus:
       1. Connect to the target database with SQL*Plus. For example, enter:
          % sqlplus 'SYS/oracle@trgt AS SYSDBA'
       2. Mount the database if it is not already mounted:
          SQL> ALTER DATABASE MOUNT;
       3. Back up the control file to a trace file:
          SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
       4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
          # The following commands will create a new control file and use it
          # to open the database.
          # Data used by the recovery manager will be lost. Additional logs may
          # be required for media recovery of offline data files. Use this
          # only if the current version of all online logs are available.
          STARTUP NOMOUNT
          CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS  ARCHIVELOG
          --  STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
              MAXLOGFILES 32
              MAXLOGMEMBERS 2
              MAXDATAFILES 32
              MAXINSTANCES 1
              MAXLOGHISTORY 226
          LOGFILE
            GROUP 1 '/oracle/oradata/trgt/redo01.log'  SIZE 25M,
            GROUP 2 '/oracle/oradata/trgt/redo02.log'  SIZE 25M,
            GROUP 3 '/oracle/oradata/trgt/redo03.log'  SIZE 500K
          -- STANDBY LOGFILE
          DATAFILE
            '/oracle/oradata/trgt/system01.dbf',
            '/oracle/oradata/trgt/undotbs01.dbf',
            '/oracle/oradata/trgt/cwmlite01.dbf',
            '/oracle/oradata/trgt/drsys01.dbf',
            '/oracle/oradata/trgt/example01.dbf',
            '/oracle/oradata/trgt/indx01.dbf',
            '/oracle/oradata/trgt/tools01.dbf',
            '/oracle/oradata/trgt/users01.dbf'
          CHARACTER SET WE8DEC
          # Take files offline to match current control file.
          ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
          ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
          # Configure RMAN configuration record 1
          VARIABLE RECNO NUMBER;
          EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
          DEBUG 255');
          # Recovery is required if any of the datafiles are restored backups,
          # or if the last shutdown was not normal or immediate.
          RECOVER DATABASE
          # All logs need archiving and a log switch is needed.
          ALTER SYSTEM ARCHIVE LOG ALL;
          # Database can now be opened normally.
          ALTER DATABASE OPEN;
          # Commands to add tempfiles to temporary tablespaces.
          # Online tempfiles have complete space information.
          # Other tempfiles may require adjustment.
          ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
          # End of tempfile additions.
       5. Shut down the database:
          SHUTDOWN IMMEDIATE
       6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
          STARTUP NOMOUNT
          CREATE CONTROLFILE ...;
          EXECUTE ...;
          RECOVER DATABASE
          ALTER SYSTEM ARCHIVE LOG CURRENT;
          ALTER DATABASE OPEN ...;
    Caution:
          If you do not open with the RESETLOGS option,
    then two copies of an archived redo log for a given log sequence number may
    exist--even though these two copies have completely different contents.
    For example, one log may have been created on the original host and the other on the new host.
    If you accidentally confuse the logs during a media recovery,
    then the database will be corrupted but Oracle and RMAN cannot detect the problem.

    Please help me to understand Caution -section
    Caution:
    If you do not open with the RESETLOGS option,
    then two copies of an archived redo log for a given log sequence number may
    exist--even though these two copies have completely different contents.
    For example, one log may have been created on the original host and the other on the new host.
    If you accidentally confuse the logs during a media recovery,
    then the database will be corrupted but Oracle and RMAN cannot detect the problem.As per my understanding it says. If you don't open database with RESETLOGS option then there may be archived logs with log sequence number which is already archived on the source host. This may happen due to difference in RECIDs. Now when the database needs media recovery for this particular log sequence, you may provide any of them. So in this case, RMAN and Oracle will not be able to differentiate the two files and can accept any of the archived log files during recovery. Since the contents of two archived logs are different, because they are generated at different times and they contains different transactions. So, internally it corrupts your database.
    Rgds.

  • Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

    Hi,
    I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30.  It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
    have done this before with a PCI HSM (older HW version)).  I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
    appears and I select that one.  I repeat, I have done this before and it works with a PCI HSM module.
    The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
    <Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
    And:
    <Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
    0x8007139f (WIN32: 5023)
    The servermanager.log says:
    1856: 2014-07-23 18:27:48.195 [CAManager]                 Sync: Validity period units: Years
    1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
       at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
       at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
    1856: 2014-07-23 18:27:48.928 [Provider]                  CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error:  Overlapped I/O operation is in progress.
    0x800703e5 (WIN32: 997)'
    1856: 2014-07-23 18:27:48.928 [Provider]                  Adding error message.
    1856: 2014-07-23 18:27:48.928 [Provider]                  [STAT] For 'Certification Authority':
    And:
    1856: 2014-07-23 18:27:49.053 [CAWebProxyManager]         Sync: Initializing defaults
    1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
       at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
       at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
    1856: 2014-07-23 18:27:49.162 [Provider]                  CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error:  The group or resource is not in the correct
    state to perform the requested operation. 0x8007139f (WIN32: 5023)'
    1856: 2014-07-23 18:27:49.162 [Provider]                  Adding error message.
    Has anyone experienced this before? Am I missing something here?
    Any help will be very appreciated
    Thanks in advance
    Best regards
    Alejandro Lozano Villanueva

    Hi, thanks for your support.
    I have been playing around a bit with some ncipher commands and found this:
    C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
    cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
    9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
    6cddc91)
    cspcheck: information: 2 containers and 2 keys found.
    cspcheck: fatal error occurred.
    If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
    E:\nfast\bin>cspcheck.exe
    cspcheck: information: 2 containers and 2 keys found.
    cspcheck: everything seems to be in order.
    Strange?
    Moreover, when I do a csptest.exe command (also on both servers, i find this)
    On the new server:
    C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
    nCipher CSP test software
    =========================
    Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
      Provider name: nCipher Enhanced Cryptographic Provider
      Version number: 1.48
    User key containers:
        Container 'csptest.exe' has no stored keys.
        Container 'Administrator' has no stored keys.
      Machine key containers:
        Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
        Container 'ROOTCA' has no stored keys.
        Container 'csptest.exe' has no stored keys.
    While in the old server:
    E:\nfast\bin>csptest.exe
    nCipher CSP test software
    =========================
    Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
      Provider name: nCipher Enhanced Cryptographic Provider
      Version number: 1.40
    User key containers:
        Container 'csptest.exe' has no stored keys.
      Machine key containers:
        Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
        Container 'ROOTCA' has a 2048-bit signature key.
        Container 'csptest.exe' has no stored keys.
    As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys.  While on the old server, it says it contains a key.  Why is this happening?  I dont know, I am copying the complete
    key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure. 
    Do you know what could be the cause of this? or how can I fix this?  Thanks a lot, best regards.
    Alejandro Lozano Villanueva

  • Tablespace Point in Time Recovery fails with RMAN-06026:

    I have cataloged with RMAN the datafiles from Snapshot backup. Still it fails with the following error.
    RMAN> RECOVER TABLESPACE TSPC UNTIL TIME "to_date('03-apr-2013 02:18:00','dd-mon-yyyy hh24:mi:ss')" AUXILIARY DESTINATION '/tmp/auxpran';
    Starting recover at 03-APR-13
    using channel ORA_DISK_1
    RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
    List of tablespaces expected to have UNDO segments
    Tablespace SYSTEM
    Tablespace UNDOTBS1
    Creating automatic instance, with SID='Ebgt'
    initialization parameters used for automatic instance:
    db_name=ORCL
    db_unique_name=Ebgt_tspitr_ORCL
    compatible=11.2.0.0.0
    db_block_size=8192
    db_files=200
    sga_target=280M
    processes=50
    db_create_file_dest=/tmp/auxpran
    log_archive_dest_1='location=/tmp/auxpran'
    #No auxiliary parameter file used
    starting up automatic instance ORCL
    Oracle instance started
    Total System Global Area 292933632 bytes
    Fixed Size 1336092 bytes
    Variable Size 100666596 bytes
    Database Buffers 184549376 bytes
    Redo Buffers 6381568 bytes
    Automatic instance created
    Running TRANSPORT_SET_CHECK on recovery set tablespaces
    TRANSPORT_SET_CHECK completed successfully
    contents of Memory Script:
    # set requested point in time
    set until time "to_date('03-apr-2013 02:18:00','dd-mon-yyyy hh24:mi:ss')";
    # restore the controlfile
    restore clone controlfile;
    # mount the controlfile
    sql clone 'alter database mount clone database';
    # archive current online log
    sql 'alter system archive log current';
    # avoid unnecessary autobackups for structural changes during TSPITR
    sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
    executing Memory Script
    executing command: SET until clause
    Starting restore at 03-APR-13
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=19 device type=DISK
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: copied control file copy
    input file name=/tmp/auxpran/controlbc.ctl
    output file name=/tmp/auxpran/ORCL/controlfile/o1_mf_8opkv8v4_.ctl
    Finished restore at 03-APR-13
    sql statement: alter database mount clone database
    sql statement: alter system archive log current
    sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
    contents of Memory Script:
    # set requested point in time
    set until time "to_date('03-apr-2013 02:18:00','dd-mon-yyyy hh24:mi:ss')";
    # set destinations for recovery set and auxiliary set datafiles
    set newname for clone datafile 1 to new;
    set newname for clone datafile 3 to new;
    set newname for clone datafile 2 to new;
    set newname for clone tempfile 1 to new;
    set newname for datafile 5 to
    "+DG_DATA/orcl/datafile/tspc.268.811733685";
    # switch all tempfiles
    switch clone tempfile all;
    # restore the tablespaces in the recovery set and the auxiliary set
    restore clone datafile 1, 3, 2, 5;
    switch clone datafile all;
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    renamed tempfile 1 to /tmp/auxpran/ORCL/datafile/o1_mf_temp_%u_.tmp in control file
    Starting restore at 03-APR-13
    using channel ORA_AUX_DISK_1
    One or more auxiliary set datafiles could not be removed
    Removing automatic instance
    shutting down automatic instance
    database dismounted
    Oracle instance shut down
    Automatic instance removed
    auxiliary instance file /tmp/auxpran/ORCL/controlfile/o1_mf_8opkv8v4_.ctl deleted
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 04/03/2013 02:32:55
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    Could anyone please reply ASAP?
    Regards,
    Pranam

    I had created a snapshot of the database(datafiles and archivelogs) and cataloged them.
    CATALOG START WITH "+TBL_DG_DATA/ORCL/DATAFILE/" NOPROMPT;
    catalog start with "+DG_ARCH/ORCL/ARCHIVELOG/" NOPROMPT;
    The time i gave was after the snapshot was created.
    When it failed the first time I created another controlfile using
    sql "alter database backup controlfile to ''/tmp/auxpran/controlbc.ctl''";
    And ran the recover command after the time after i generated this controlfile. Changed nothing else. TSPITR completed successfully. But it had failed first time. Cannot figure how it ran the second time but failed the first time.
    Removing automatic instance
    Automatic instance removed
    auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_temp_8opndd87_.tmp deleted
    auxiliary instance file /tmp/auxpran/ORCL/onlinelog/o1_mf_3_8opnd1o6_.log deleted
    auxiliary instance file /tmp/auxpran/ORCL/onlinelog/o1_mf_2_8opncy32_.log deleted
    auxiliary instance file /tmp/auxpran/ORCL/onlinelog/o1_mf_1_8opncv7d_.log deleted
    auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_sysaux_8opn516p_.dbf deleted
    auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_undotbs1_8opn4j14_.dbf deleted
    auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_system_8opmyvly_.dbf deleted
    auxiliary instance file /tmp/auxpran/ORCL/controlfile/o1_mf_8opmy14q_.ctl deleted
    Finished recover at 03-APR-13

  • Internal session terminated with a runtime error(ITAB_DUPLICATE_KEY)

    Hi All,
    Process Chain is failing While loading data from ODS to Cube iam getting error in DTP level internal session terminated with a runtime error(ITAB_DUPLICATE_KEY).Here my source is CRM.
    Can you please suggest me for this issue.
    Thanks,
    Mahes.

    hi Maheesh,
    Runtime Error ITAB_DUPLICATE _KEY is resulted because of Duplicate Transfer Structures from different Logical Systems.
    You can find the corresponding entries in the table RSISOSMAP ..On executing,we have the option to give the InfoSource name(ISOURCE) for wich the data load got failed with Runtime Error ITAB_DUPLICATE_KEY..
    You can coreect this error by running the Program RSAR_RSISOSMAP_REPAIR in repair mode , the program first checks the RSISOSMAP table and corrects any incorrect entries found. A log is then written for the mappings that were corrected.
    This will solve your problem.
    Please refer to link mention in above thread for more detail i have just summarize the things :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04c82eb-ec7c-2c10-7fae-ca6e764c483a?QuickLink=index&overridelayout=true
    Thanks,
    Deepak

  • Windows 2008 R2 backup fails with event 521 error code 2155348001

    Windows Server 2008 R2 SP1.  Hyper-V role installed. 
    OS on drive C.  All VMs stored on Drive D.
    I am attempting to run a Bare Metal backup of the host system to a network share. 
    Drive D is not included in the backup job.  I am getting the following error:
    Log Name:      Application
    Source:        Microsoft-Windows-Backup
    Date:          1/10/2014 11:28:52 PM
    Event ID:      521
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      SHAQTUS.scdl.local
    Description:
    The backup operation that started at '‎2014‎-‎01‎-‎11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
    details for a solution, and then rerun the backup operation once the issue is resolved.
    Reviewing event details, as suggested, does not offer any solution.
    I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry. 
    This does not work.
    I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
    cause problems for those servers. Haven't found similar procedures for 2008 R2.
    I have been able to narrow this down a bit.
    A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
    Install the DPM 2012 agent – same backup fails with the 2155348001 error.
    We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature. 
    I prefer to run Bare Metal Backup to a file server share.
    Stuck on this one.
    Rick

    Hi, 
    The issue is related to DPM, I would suggest you ask for help from DPM forums:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
    Regards, 
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How do I deal with a Runtime Error on Adobe Acrobat 9.5?

    How do I deal with a Runtime Error on Adobe Acrobat 9.5? The instructions say to contact the support team but I have to pay in order to do so.

    What operating system and what is the statement of the error. Typically you would first run a repair on Acrobat from the help menu (or in Windows you can do that from the Control Panel>Add/Remove Programs).

  • Background job failing with license check error

    Hi Experts
    In our ERP 6.0 system ,all the background jobs are failing with license check error.
    Have checked the license in SLICENSE and the license is fine.
    There is no warning while users are loggign in ,but when any background job is runing its failing with error
    Job started
    Logon not possible (error in license check)
    Job cancelled after system exception ERROR_MESSAGE
    Also performed the license test which is failing
    F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
    \XX1_DVEBMGS00_host_xx
    Protocol saplicense test:
    Read sapsytem name
           ok, sapsytem name = XX1
    Read message server host
           ok, host = hostname
    Read message server service port
           ok, service port = sapmsXX1
    Connect to message server
           ok, connect done
    Read hardware key from message server
           ok, got hardware key
    Detach from message server
           ok, detached
    Check hardware key
           ok, hardware key = T0343073854
    Connect to database
           ok, connected
    Check license
           ok, check done
    Disconnect database
           ok, database disconnected
    test result: license test failed
    LICENSE system: XX1 hardware key: T0343073854 expiration_date:
            installation no:  key:
            userlimit: 0 productid: R3_BASIS
            system-nr:
    license expired ***
    Please suggest how to troubleshoot.
    Regards
    Ajay

    @Michael
    In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
    @Jagadish
    Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
    But still the license test is failing at OS Level..below is the command prompt output.
    ===================================================================
    F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
    =F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
    SAP License Key Administration  -  Copyright (C) 2003 SAP AG
    2 SAP license key(s) successfully installed.
    F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
    \MD1_DVEBMGS00_mngsez148079
    Protocol saplicense test:
    Read sapsytem name
           ok, sapsytem name = XX1
    Read message server host
           ok, host = host
    Read message server service port
           ok, service port = sapmsXX1
    Connect to message server
           ok, connect done
    Read hardware key from message server
           ok, got hardware key
    Detach from message server
           ok, detached
    Check hardware key
           ok, hardware key = T0343073854
    Connect to database
           ok, connected
    Check license
           ok, check done
    Disconnect database
           ok, database disconnected
    test result: license test failed
    LICENSE system: XX1 hardware key: T0343073854 expiration_date:
            installation no:  key:
            userlimit: 0 productid: R3_BASIS
            system-nr:
    license expired ***
    ============================================================
    @Juan
    The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
    But now this issue is here,so i guess we should troubleshoot.
    Please let me know any other pointers.
    Regards
    Ajay
    PS In SLICENSE new installed license is fine and all users can login.

  • Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

    I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin.  Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database.  The user attempts
    to connect using Excel client or Access or SQL Management Studio and receives Error 18456.  The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data.  But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
    18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    We've turned off UAC on the client machine to see if that was the problem, but no change.
    I have dropped and re-added the user's SQL Login (and the related database user login info).  No success.
    The Ring Buffers output shows:
    The Calling API Name: LookupAccountSidInternal
    API Name: LookupAccountSid
    Error Code: 0x534
    Thanks for any help.
    -Walt

    Yes, you understand correctly.  The user is logging onto a workstation (not the server) with a Windows Authenticated id.  The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
     If the account has sysadmin role (which is only for testing) then the connection is successful.  If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
    18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    (SQL Authentication is not an option here.  I must use Windows Authentication).
    Any other troubleshooting assistance you can offer would be appreciated.  Thanks.
    -Walt 

  • BRBACKUP fails with 'BR0301W SQL error -980 at location BrbDbLogOpen'

    Hello mates,
    BRBACKUP on our Portal systems fails with the following error:
    EP Version: 600
    Platform: HP-Unix (ia64 hp server rx7640)
    Oracle: 920_64
    BRTOOLS 6.40 (40)
    BR0301W SQL error -980 at location BrbDbLogOpen
    BR0324W Insertion of database log header failed
    Here is the exerpt from the logfile:
    ==============================================
    BR0051I BRBACKUP 6.40 (40)
    BR0055I Start of database backup: bdyxzsml.anf 2008-10-01 08.04.51
    BR0477I Oracle pfile /oracle/GGF/920_64/dbs/initGGF.ora created from spfile /oracle/GGF/920_64/dbs/spfileGGF.ora
    BR0925I Public synonym SAP_SDBAH created successfully for table SAPGGFDB.SDBAH
    BR0925I Public synonym SAP_SDBAD created successfully for table SAPGGFDB.SDBAD
    BR0925I Public synonym SAP_MLICHECK created successfully for table SAPGGFDB.MLICHECK
    BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
    BR0301W SQL error -980 at location BrbDbLogOpen-5
    ORA-00980: synonym translation is no longer valid
    BR0324W Insertion of database log header failed
    BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
    BR0319I Control file copy created: /oracle/GGF/sapbackup/cntrlGGF.dbf 8052736
    BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
    BR0301W SQL error -980 at location BrDbfInfoGet-30
    ORA-00980: synonym translation is no longer valid
    BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
    BR0301W SQL error -980 at location BrDbfInfoGet-31
    ORA-00980: synonym translation is no longer valid
    BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
    BR0301E SQL error -980 at location BrComprDurGet-1
    ORA-00980: synonym translation is no longer valid
    BR0314E Collection of information on database files failed
    BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
    BR0301W SQL error -980 at location BrbDbLogOpen-5
    ORA-00980: synonym translation is no longer valid
    BR0324W Insertion of database log header failed
    BR0056I End of database backup: bdyxzsml.anf 2008-10-01 08.04.51
    BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
    BR0054I BRBACKUP terminated with errors
    ============================================
    I am not able to find any relevant solutions in SMP so far.
    Please help find a solution.
    Thanks & Regards,
    Manoj

    Hello ,
    Am trying to take the online backup using brtools in my portal server but giving below error:
    BR0051I BRBACKUP 7.00 (24)
    BR0055I Start of database backup: bdzqskqc.and 2009-01-08 17.44.50
    BR0484I BRBACKUP log file: /oracle/EPP/sapbackup/bdzqskqc.and
    BR0477I Oracle pfile /oracle/EPP/102_64/dbs/initEPP.ora created from spfile /oracle/EPP/102_64/dbs/spfileEPP.ora
    BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
    BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
    'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108174450', 'and', 'EPP', ' ', '99
    , ' ', 'bdzqskqc', '#    0     0     0         0                0        0                0  ALL          online
    disk             ---k-c 7.00 (24)')'
    ORA-01031: insufficient privileges
    BR0324W Insertion of database log header failed
    BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
    BR0319I Control file copy created: /oracle/EPP/sapbackup/cntrlEPP.dbf 7397376
    BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
    BR0301W SQL error -1031 at location BrDbfInfoGet-32, SQL statement:
    'DELETE FROM SAP_SDBAH WHERE BEG > '10000000000000' AND BEG < '20071205000000''
    ORA-01031: insufficient privileges
    BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
    BR0301W SQL error -1031 at location BrDbfInfoGet-33, SQL statement:
    'DELETE FROM SAP_SDBAD WHERE BEG > '10000000000000' AND BEG < '20071205000000''
    ORA-01031: insufficient privileges
    BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
    BR0301E SQL error -1031 at location BrComprDurGet-1, SQL statement:
    'OPEN curs_6 CURSOR FOR'
    'SELECT FUNCT, POS, LINE FROM SAP_SDBAD WHERE BEG = '00000000000001' AND (FUNCT = 'CMP' OR FUNCT = 'CMP' OR FUNCT = 'DC
    OR FUNCT = 'DCM') ORDER BY FUNCT'
    ORA-01031: insufficient privileges
    BR0314E Collection of information on database files failed
    BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
    BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
    'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108174450', 'and', 'EPP', ' ', '99
    , ' ', 'bdzqskqc', '7.00 (24)')'
    ORA-01031: insufficient privileges
    BR0324W Insertion of database log header failed
    BR0056I End of database backup: bdzqskqc.and 2009-01-08 17.44.50
    BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
    BR0054I BRBACKUP terminated with errors
    Please suggest/guide
    Regards,
    AMS Team

Maybe you are looking for

  • How to correctly sync from Itunes after Ipod touch

    Hi, I just got a new Iphone 3G, after having used an Ipod touch. I synced the Iphone from Itunes, and all my existing apps and settings have synced OK, but all the apps are empty and none of my photos, videos etc. have synced - even though I went thr

  • G4 MDD power button going bad?

    Hi all - I'm using a g4 MDD dual 1gig machine. Has been working great for the past few months, till just now. When I power down, the computer won't restart, unless I unplug it. (what?) That's right, the computer works fine, I turn it off and the powe

  • Just updated my iPhone 4 to iOS 7.1.2, and my phone won't get service

    So I just went through the new software update, and since my phone has restarted it won't get service. A "Waiting for activation - this may take some time" message popped up after the reset, but nothing else. All I see is "Searching...". I've never h

  • Execution of Reports

    Hi, While executing the PS reports CN43N and CJI3, the execution is taking very long time. Can anyone please suggest on this, how to reduce the execution time ? Regards Kiran Kumar

  • Using inspection plan in multiple plants

    Hi, I would like to use one inspection plan in multiple plants. Are there any disadvantages or pitfalls? (besides the fact that if I use workcenters, the same workcenters must exist in all plants using the plan) Marcus.