System Refresh now Boot Error

Ideapad Z585 A10
Kept freezing. Performed a system refresh on 8.1
I wanted to clean it up before my upgrade to 10.
Now after first boot up, it froze. Held power button down. Re-boot, Nothing. Was able to boot into Recovery, now getting blue screen:
PC needs repaired
Boot Configuration Data missing or contains errors.
File:\EFI\MICROSOFT\BOOT\BCD
ERROR CODE : 0xc000000f
Problem, my PC did not come with external recovery media.
What can I do? Can I install Windows 10 to fix the problem?

It sounds like the hard drive itself may have failed.
- Peter

Similar Messages

System Refresh SAPINST.exe error ExeProcs was executed with status Error

Hi Everyone,
                     As part of system refresh, our QA ECC is restored with Production Data backup. In this process, sapinst.exe is executed to perform homogeneous system copy steps. This process is being terminated with error at the step *"Create SAP stored procedures"*.
The error being displayed is as follows:
An error occurred while processing option SAP Toools for MS SQL Server > Database Copy Completion( Last error reported by the step: Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]The specified @job_name ('SAP CCMS_qpe_QPE_Update_Tabstats') does not exist.
SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.
). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.
sapinst.log file contains following information:
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.4.xml'.
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.5.xml'.
INFO 2010-11-06 17:40:31
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2010-11-06 17:40:41
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.3.xml'.
INFO 2010-11-06 17:40:41
Execute step ExeProcs of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0.
ERROR 2010-11-06 17:40:58
FCO-00011 The step ExeProcs with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
Our Environment details:
SAP Version : ECC6
OS                 : Microsoft windows server 2003
DB                 : Microsoft SQL Server         2005.
Can some please guide me in debugging this issue. Your help is highly appreciated.
Thanks a lot in advance.
Kind Regards,
Bharani.

Hi Satya,
             Thank you for the reply. QA in our landsacpe was in use since 2008. Serveral times system refresh is carried out on our QA with production data but never came accross this issue.
             Usually if the SAPINST.exe run is successfull, temperory licence will be installed and we will be allowed to login into the sytem with our user names normally and carry out post installation steps.
             As the SAPISNT.exe is being terminated, temperory license is not being installed and we got to work around by including parameter to allow default sap* userid and password to login and install license and carry on with the post installation steps. To be frank this issue is not really a show stopper, but there seems to be an issue that is to be resolved.
Thank you,
Kind Regards,
Bharani.

After System Update last night, the system will not boot with IOPlatformExpert.cpp:1504 error

I have had Lion for a 2, 3 months on the iMac 27 inch purchased last October (2011). Last night I chose to update the system, and deselected iMoves update because it was 1GB, and chose only 4 updates, including iTunes, Safari (i think)... But the update says error, and ask to restart the system (it won't restart itself, so I waited 30 minutes, and then pressed the Power button for 10 seconds, to let it power down, and press Power again to power it up).
However, after that, the system failed to boot up, showing a
panic(cpu 0 caller .....)" "Unable to finder driver for this platform: \"ACPI\". ... xnu-1699.26.8/iokit/Kernel/IOPlatformExpert.cpp:1504
This is not typical of the upgrade process. So I searched the Internet forIOPlatformExpert.cpp:1504 and some people said it is a hard drive error, but then I powered down and pressed Options when booting up, and was able to boot to Windows 7 (bootcamp)... and was able to boot to the "Recovery", which let me choose
Restore from Time Machine Backup
Reinstall Mac OS X
Get Help Online
Disk Utility
what should I do now to fix it so that it can boot again?

This error is caused by one of the updates you applied, namely the Thunderbolt Software Update 1.2. Many people have been affected by it, including me. I did what Linc Davis has suggested above to fix it. The most extensive discussion about the problem, with ways to fix the problem, is here:
https://discussions.apple.com/thread/4020399?start=0&tstart=0

Java daemon on boot: "This user is not allowed access to the window system right now."

The daemon is located in /Library/LaunchDaemons/ and launches successfully on most occasions. However, it sometimes fails to start with this error:
Nov 17 20:36:24 server.local java[28972]: This user is not allowed access to the window system right now.
Nov 17 20:36:24 server com.apple.launchd[1] (net.java.server): Throttling respawn: Will start in 10 seconds
I have the server command running as a background daemon using its "nogui" option (the developers claim to have written it to not display a gui). However, it seems that somewhere along the line, Java is trying to display something. As the daemon is running before users log in, it gives this error. Once a user is logged in to the system, it runs fine; however, logging in a user to run the server is not an option. It needs to run on boot.
Any ideas for how to solve this? I'm going to contact the developers to see if it may be something they can fix, but I want to be able to force the issue in case the problem ever occurs in the future.

Irrespective of any claims by the developer, this certainly appears to be a test case that shows that the tool is not working as expected, and that the application has a bug. This test case would be better if there was some evidence around why only some of the startups fail, but in general this will involve what's been suggested earlier: "Contact the application developer."
As some general background on what's involved, see daemons and agents and related; processes that are not allowed to connect to the GUI for reasons of security.
I'd also suggest testing your DNS, as seeing "server.local" can imply local DNS configuration errors. Launch Terminal.app from Applications > Utilities and issue the following harmless diagnostic command and see if it reports no changes, or if it detects network or DNS errors:
sudo changeip -checkhostname
If this is OS X Server and a NAT'd network, you do not want to reference any DNS servers located off of your NAT'd network.
Why DNS? Because DNS errors can cause only some operations to fail, particularly if there's more than one DNS server selected (and where some subset of the DNS servers are malfunctioning or misconfigured).

Portal Runtime Error after System Refresh

Did a system refresh and now when I select a BI workbook that executed before the refresh I receive the error
"portal runtime error
an exception occurred while processing your request
exception id:09:27_07/02/11_0018_2780350
see the details for the exceptio id in the log file".
Queries run without erroring only the workbooks give this error... apprecitate any help - thanks

Hi Annette,
Did you clear all the cache, closed the browser and try again?
If the error still appears, check the error log.
Where are you checking the BI workbook? Is it through portal is it through an iview? If yes then check if the
application runs when the iview is previewed directly.

[SOLVED] Switch to systemd - Now system won't boot

I saw that todays update upgrade included the installation of systemd. I looked the wiki and did the necessary changes (I already had made the /etc/hostname etc. files). So I added the
init=/bin/systemd
line to grub and now my system won't boot. I get an error saying something about syslog service not enabled and then a black screen. I can boot my machine fine without the "init=/bin/systemd" line but I want to run a pure systemd system since Arch is moving to it anyway. In the wiki it mentions to install systemd-sysvcompat but it conflicts with initscripts it says. What am I doing wrong or missing?
Last edited by fettouhi (2013-12-08 14:42:04)

fettouhi wrote:
Thanks for the clarification about the DAEMONS list. My DAEMONS list is:
DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond @alsa dbus networkmanager ufw cupsd avahi-daemon samba)
when I try to enable alsa and dbus I get this
[root@andre ~]# systemctl enable alsa-store.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable alsa-restore.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable dbus.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
Is LVM handled automatically by systemd? The reason I ask is because I have the USELVM= set to YES in rc.conf.
I made the permanent transition to systemd and did not start alsa at all - sound works fine - so I never bothered with the alsa-store/alsa-restore service files at all - it just works! Also dbus gets handled by default in systemd so you don't need any starting of dbus service at all... it just works.

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

System refresh error

Hi
I am facing some issues while doing system refresh in ECC6.
Solaris 10
Oracle 10g
ECC6,(JAVA+ABAP) on one system.
I have followed given below steps
1) Perform dboracopy
2)Master-DVD->sapinst->LifeCycle -> oracle-> system copy-> oracle-> o-> centralsystem
Above steps copied control files and JAVA/ABAP files under one dir.
3)Master-DVD->sapinst->LifeCycle -> oracle-> system copy->oracle -> Target->central system.
After restoring the database when I am trying give migration export location.. I am receiving error "please insertl CD with right LABEL."
Migration export location is the one which we created during step 1 and step2 at source server...
Don't know why it is not accepting the configuration from source system.
Any help would be appreciated...
Thanks
Sukrut

Manoj,
Thanks for your reply.
Actually when I am trying provide the location of export files,I am getting the error "lable not fond" and it is looking for some CD.
Thanks
Sukrut

ITunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.

Attempted update to iTunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

SOLVED: Created /etc/X11/xorg.conf, now system won't boot.

I was trying to solve an issue with display resolution not sticking and it was suggested to me that I create an /etc/X11/xorg.conf.
I created the file and put in the lines that I had in my .xprofile related to xrandr.
Now... my system will not boot. It appears to get hung up trying to detect my ethernet connection. I tried Ctrl-Alt-F1 to avoid X windowing, no dice.
What's more, my system rescue pen drive appears to have died. I still have my Arch install CD.
All I want to do is delete xorg.conf. My arch root is a logical volume so I have no idea how to mount it after I boot from the Arch install CD, or if I can even do this.
Update: So embarrassing, my mount command was wrong. Once I did something that looked like this:
mount /dev/VolGroup0/root /mnt/
I was able to get into /etc/X11 and delete xorg. conf. Rebooted and all appears well.
Last edited by testingwithfire (2014-06-02 01:36:07)

For mounting LVM, this page should probably help: https://wiki.archlinux.org/index.php/LV … al_volumes
Once in, then it should be easy.

Recovery system power was shutoff while running. now debug error always pops up.

I have a Hp 65 notebook. When was running the recovery system the power was shutoff. Now Debug error pops up at the bottom it says abort-retry-ignore. When I hit any of those squares. The next box says systems recovery options. Below that it says. The installed program cannot start. Click ok to turn off computer.

Stevealex,
Okay, no problem.
What you are going to need to do is order a set of operating system disk for this computer. Since you were in the middle of a recovery and the computer turned off, that crashed the process and it didn't successfully re-write the operating system and drivers back to the computer.
To provide you the best way to order those disks, I need the full make and model of the computer you have. You provided HP 65 but I was unable to locate that notebook anywhere. Here is a link that might help you find the information.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

System Refresh getting error "Your System has corresponding JAVA stack"

Hello Experts,
I am trying to do a system refresh on my HCM system which is ABAP only.
When I run SWPM --> Generic Installation Options -->MS SQL Server --> Database Tools --> Database copy completion, I get the following error.
Version Information is as follows:
Kernal is 721
ECC 6.0 Basis 702 level 9 (Netweaver 7.02)
Windows server is 2008 R2 standard
MSSQL is 10.50.4000
Yes, I have done my research and failed also has a High OSS message open with SAP. This issue is very critical so any help as early as possible is highly appreciated.
Thank You.

Hi Muhammad,
It looks like you have a Java schema in your database, and sapinst is finding that and therefore assuming it's a double-stack system. Perhaps this system used to be double-stack at one time, and then was split? In the trace file I saw the following entries, at different points:
SID: HCT
DbServer: USALSQLT01\HCMT
DbName: HCT
ABAP Schema: hct
Java Schema: SAPHCTDB
TRACE      2014-04-18 09:26:36.318
Found corresponding java schema SAPHCPDB. Aborting.
TRACE      2014-04-18 09:26:36.333 [iaxxgenimp.cpp:325]
           CGuiEngineImp::showDialogCalledByJs()
showing dlg d_doubleStackSystemError
TRACE      2014-04-18 09:26:36.333 [iaxxgenimp.cpp:335]
           CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_doubleStackSystemError">
<title>Unsupported System</title>
<dialog/>
So, that seems to be the cause. If you're sure this is only supposed to be a single-stack ABAP system, you might try deleting the SAPHCPDB schema using database tools and then re-running sapinst.
While you're at it, it looks like you might have an old copy of Sun JRE 1.4.2 still installed (perhaps from the old days when that version was required to run sapinst). In the environment variables in the trace I saw:
JAVA_HOME=C:\j2sdk1.4.2_29-x64
You might want to uninstall that if you don't need it anymore, and unset that environment variable. Also, your swap size looks low for a 64-bit system with 8 GB RAM, even for a test system:
Swap size (MB): 9998.18
Best regards,
Matt

System Refresh now Boot Error

Similar Messages

Maybe you are looking for